19-237-R6GHBHC-A04-2T [EVERLIGHT]
Full Color Chip LED; 全彩贴片LED型号: | 19-237-R6GHBHC-A04-2T |
厂家: | EVERLIGHT ELECTRONICS CO., LTD |
描述: | Full Color Chip LED |
文件: | 总12页 (文件大小:209K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
Full Color Chip LED
19-237/R6GHBHC-A04/2T
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Multi-color type.
․Pb-Free.
Descriptions
․The 19-237 SMD Taping is much smaller
than lead frame type components, thus
enable smaller board size, higher packing
density, reduced storage space and finally
smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Automotive: backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
Lens Color
Type
R6
Material
AlGaInP
InGaN
Emitted Color
Brilliant Red
Brilliant Green
Blue
Water Clear
GH
BH
InGaN
Everlight Electronics Co., Ltd.
Device No. : DSE-937-004
http://www.everlight.com
Prepared date: 04-01-2004
Rev. 1.0
Page: 1 of 12
Prepared by : Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-237/R6GHBHC-A04/2T
Package Outline Dimensions
1.6
Green
Blue
2
3
1
4
Anode mark
Red
1.1
1.0
0.8
For reflow soldering (propose)
1
4
2
3
0.8
2.4
Note: The tolerances unless mentioned is ±0.1mm,Unit = mm
Everlight Electronics Co., Ltd.
Device No. : DSE-937-004
http://www.everlight.com
Prepared date: 04-01-2004
Rev. 1.0
Page: 2 of 12
Prepared by : Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-237/R6GHBHC-A04/2T
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
R6:25
GH:25
BH:25
Forward Current
IF
mA
Operating Temperature
Storage Temperature
Topr
Tstg
-40 ~ +85
℃
℃
-40 ~ +90
260 (for 5
seconds)
R6:60
Soldering Temperature
Tsol
℃
Power Dissipation
Pd
GH:110
BH:110
R6:60
mW
Peak Forward Current
(Duty 1/10 @1KHz)
IFP
GH:100
BH:100
mA
Everlight Electronics Co., Ltd.
Device No. : DSE-937-004
http://www.everlight.com
Prepared date: 04-01-2004
Rev. 1.0
Page: 3 of 12
Prepared by : Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-237/R6GHBHC-A04/2T
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
18.0
28.5
11.5
Typ.
30.0
60.0
18.0
Max.
Unit
Condition
R6
Luminous Intensity
Iv
GH
BH
-----
mcd
Viewing Angle
2θ1/2
-----
120
632
518
468
624
525
470
-----
-----
deg
nm
R6
GH
BH
R6
Peak Wavelength
λp
λd
-----
IF=5mA
Dominant Wavelength
GH
BH
-----
-----
-----
-----
nm
nm
R6
20
35
Spectrum Radiation
Bandwidth
△λ GH
BH
R6
35
-----
2.6
1.9
2.2
3.0
3.0
10
Forward Voltage
Reverse Current
VF
IR
GH
BH
R6
-----
-----
V
2.6
VR=5V
GH
BH
-----
-----
50
μA
50
Bin Range Of Forward Voltage
Symbol
Bin Code
Min.
Max.
Unit
Condition
IF=5mA
1
2
1
2
2.60
2.80
2.60
2.80
2.80
3.00
2.80
3.00
GH
V
BH
Notes:
1.Tolerance of Luminous Intensity ±10%
2.Tolerance of Forward Voltage ±0.1V
Everlight Electronics Co., Ltd.
Device No. : DSE-937-004
http://www.everlight.com
Prepared date: 04-01-2004
Rev. 1.0
Page: 4 of 12
Prepared by : Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-237/R6GHBHC-A04/2T
Typical Electro-Optical Characteristics Curves
R6
Everlight Electronics Co., Ltd.
Device No. : DSE-937-004
http://www.everlight.com
Prepared date: 04-01-2004
Rev. 1.0
Page: 5 of 12
Prepared by : Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-237/R6GHBHC-A04/2T
Typical Electro-Optical Characteristics Curves
GH
Everlight Electronics Co., Ltd.
Device No. : DSE-937-004
http://www.everlight.com
Prepared date: 04-01-2004
Rev. 1.0
Page: 6 of 12
Prepared by : Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-237/R6GHBHC-A04/2T
Typical Electro-Optical Characteristics Curves
BH
Everlight Electronics Co., Ltd.
Device No. : DSE-937-004
http://www.everlight.com
Prepared date: 04-01-2004
Rev. 1.0
Page: 7 of 12
Prepared by : Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-237/R6GHBHC-A04/2T
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No. : DSE-937-004
http://www.everlight.com
Prepared date: 04-01-2004
Rev. 1.0
Page: 8 of 12
Prepared by : Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-237/R6GHBHC-A04/2T
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Aluminum moistue-proof bag
Label
Desiccant
Label
Everlight Electronics Co., Ltd.
Device No. : DSE-937-004
http://www.everlight.com
Prepared date: 04-01-2004
Rev. 1.0
Page: 9 of 12
Prepared by : Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-237/R6GHBHC-A04/2T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
Test
Hours/Cycles
Sample
Size
No.
1
Items
Test Condition
Ac/Re
0/1
Temp. : 260℃±5℃
Reflow Soldering
22 PCS.
6 Min.
Min. 5sec.
H : +100℃ 15min
300 Cycles
2
Temperature Cycle
Thermal Shock
22 PCS.
0/1
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
300 Cycles
3
4
22 PCS.
22 PCS.
0/1
0/1
∫ 10 sec
L : -10℃ 5min
High Temperature
Storage
Low Temperature
Storage
1000 Hrs.
1000 Hrs.
Temp. : 100℃
Temp. : -40℃
5
6
7
22 PCS.
22 PCS.
22 PCS.
0/1
0/1
0/1
DC Operating Life
IF = 20 mA
1000 Hrs.
1000 Hrs.
High Temperature /
High Humidity
85℃/ 85%RH
Everlight Electronics Co., Ltd.
Device No. : DSE-937-004
http://www.everlight.com
Prepared date: 04-01-2004
Rev. 1.0
Page: 10 of 12
Prepared by : Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-237/R6GHBHC-A04/2T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
Device No. : DSE-937-004
http://www.everlight.com
Prepared date: 04-01-2004
Rev. 1.0
Page: 11 of 12
Prepared by : Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-237/R6GHBHC-A04/2T
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No. : DSE-937-004
http://www.everlight.com
Prepared date: 04-01-2004
Rev. 1.0
Page: 12 of 12
Prepared by : Jeff Tsai
相关型号:
19-237/R6GHBHC-A04/2T
Triple Color LED, Brilliant Red/brilliant Green/blue, Water Clear, 1.6mm, ROHS COMPLIANT, SMD, 4 PIN
EVERLIGHT
19-237A/BHR6GHC-A01/2T
Triple Color LED, Brilliant Red/brilliant Green/blue, Water Clear, 1.6mm, ROHS COMPLIANT, SMD, 4 PIN
EVERLIGHT
©2020 ICPDF网 联系我们和版权申明