首页 |元器件品牌

19-223-G6S2C-A01-2T [EVERLIGHT]

Chip LED with Bi-Color (Multi-Color); 芯片具有双色LED （多色）
19-223-G6S2C-A01-2T
型号： 19-223-G6S2C-A01-2T
厂家： EVERLIGHT ELECTRONICS CO., LTD    EVERLIGHT ELECTRONICS CO., LTD
描述：

Chip LED with Bi-Color (Multi-Color)
芯片具有双色LED （多色）
文件： 总13页 (文件大小：188K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
EVERLIGHT ELECTRONICS CO.,LTD.  
Technical Data Sheet  
Chip LED with Bi-Color (Multi-Color)  
19-223/G6S2C-A01/2T  
Features  
․Package in 8mm tape on 7〞diameter reel.  
․Compatible with automatic placement equipment.  
․Compatible with infrared and vapor phase reflow  
solder process.  
․Multi-color type.  
․Pb-free.  
‧RoHS refer to SMD B TYPE SGS report.  
Descriptions  
․The 19-223 SMD Taping is much smaller  
than lead frame type components, thus  
enable smaller board size, higher packing  
density, reduced storage space and finally  
smaller equipment to be obtained.  
․Besides, lightweight makes them ideal for  
miniature applications. etc.  
Applications  
․Automotive: backlighting in dashboard and switch.  
․Telecommunication: indicator and backlighting in  
telephone and fax.  
․Flat backlight for LCD, switch and symbol.  
․General use.  
Device Selection Guide  
Chip  
Emitted Color  
Lens Color  
Type  
G6  
Material  
AlGaInP  
AlGaInP  
Brilliant Yellow Green  
Brilliant Oange  
Water Clear  
S2  
Everlight Electronics Co., Ltd.  
Device No:DSE-192-042  
http://www.everlight.com  
Prepared date: 25-May-2005  
Rev. 4  
Page: 1 of 13  
Prepared by: Jeff Tsai  
EVERLIGHT ELECTRONICS CO.,LTD.  
19-223/G6S2C-A01/2T  
Package Outline Dimensions  
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm  
Everlight Electronics Co., Ltd.  
Device No:DSE-192-042  
http://www.everlight.com  
Rev. 4  
Page: 2 of 13  
Prepared date: 25-May-2005  
Prepared by: Jeff Tsai  
EVERLIGHT ELECTRONICS CO.,LTD.  
19-223/G6S2C-A01/2T  
Absolute Maximum Ratings (Ta=25℃)  
Parameter  
Symbol  
VR  
Rating  
5
Unit  
Reverse Voltage  
V
mA  
℃
Forward Current  
IF  
25  
Operating Temperature  
Storage Temperature  
Electrostatic Discharge  
Power Dissipation  
Peak Forward Current  
(Duty 1/10 @1KHz)  
Topr  
Tstg  
ESD  
Pd  
-40 ~ +85  
-40 ~ +90  
2000  
℃
V
60  
mW  
IFP  
60  
mA  
Reflow Soldering : 260 ℃ for 10 sec.  
Hand Soldering : 350 ℃ for 3 sec.  
Soldering Temperature  
Tsol  
Electro-Optical Characteristics (Ta=25℃)  
Parameter  
Symbol  
Min.  
Typ.  
Max.  
45.0  
Unit  
mcd  
Condition  
Iv G6 28.5  
S2 112.0  
Luminous Intensity  
-----  
140.0  
Viewing Angle  
2θ1/2  
-----  
-----  
120  
-----  
-----  
deg  
nm  
λp  
G6  
575  
611  
Peak Wavelength  
S2  
IF=20mA  
568.5  
602.0  
----  
----  
574.5  
608.0  
λd  
G6  
S2  
Dominant Wavelength  
nm  
Spectrum Radiation  
Bandwidth  
-----  
20  
-----  
△λ  
nm  
V
VF  
IR  
Forward Voltage  
Reverse Current  
-----  
-----  
2.0  
2.4  
10  
μA  
-----  
VR=5V  
Notes:  
1.Tolerance of Luminous Intensity ±10%  
2.Tolerance of Dominant Wavelength ±1nm  
Everlight Electronics Co., Ltd.  
Device No:DSE-192-042  
http://www.everlight.com  
Prepared date: 25-May-2005  
Rev. 4  
Page: 3 of 13  
Prepared by: Jeff Tsai  
EVERLIGHT ELECTRONICS CO.,LTD.  
19-223/G6S2C-A01/2T  
G6  
Bin Range Of Luminous Intensity  
Bin  
N
Min  
28.5  
Max  
45.0  
Unit  
mcd  
Condition  
IF=20mA  
S2  
Bin Range Of Luminous Intensity  
Bin  
R1  
Min  
112  
Max  
140  
Unit  
mcd  
Condition  
IF=20mA  
Note:  
The luminous intensity data did not including ±10% testing tolerance.  
Everlight Electronics Co., Ltd.  
Device No:DSE-192-042  
http://www.everlight.com  
Rev. 4  
Page: 4 of 13  
Prepared date: 25-May-2005  
Prepared by: Jeff Tsai  
EVERLIGHT ELECTRONICS CO.,LTD.  
19-223/G6S2C-A01/2T  
Typical Electro-Optical Characteristics Curves  
G6  
Everlight Electronics Co., Ltd.  
Device No:DSE-192-042  
http://www.everlight.com  
Rev. 4  
Page: 5 of 13  
Prepared date: 25-May-2005  
Prepared by: Jeff Tsai  
EVERLIGHT ELECTRONICS CO.,LTD.  
19-223/G6S2C-A01/2T  
Typical Electro-Optical Characteristics Curves  
G6  
Everlight Electronics Co., Ltd.  
Device No:DSE-192-042  
http://www.everlight.com  
Rev. 4  
Page: 6 of 13  
Prepared date: 25-May-2005  
Prepared by: Jeff Tsai  
EVERLIGHT ELECTRONICS CO.,LTD.  
19-223/G6S2C-A01/2T  
Typical Electro-Optical Characteristics Curves  
S2  
Everlight Electronics Co., Ltd.  
Device No:DSE-192-042  
http://www.everlight.com  
Rev. 4  
Page: 7 of 13  
Prepared date: 25-May-2005  
Prepared by: Jeff Tsai  
EVERLIGHT ELECTRONICS CO.,LTD.  
19-223/G6S2C-A01/2T  
Typical Electro-Optical Characteristics Curves  
S2  
Everlight Electronics Co., Ltd.  
Device No:DSE-192-042  
http://www.everlight.com  
Rev. 4  
Page: 8 of 13  
Prepared date: 25-May-2005  
Prepared by: Jeff Tsai  
EVERLIGHT ELECTRONICS CO.,LTD.  
19-223/G6S2C-A01/2T  
Label explanation  
CAT: Luminous Intensity Rank  
HUE: Dom. Wavelength Rank  
REF: Forward Voltage Rank  
Reel Dimensions  
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm  
Everlight Electronics Co., Ltd.  
Device No:DSE-192-042  
http://www.everlight.com  
Rev. 4  
Page: 9 of 13  
Prepared date: 25-May-2005  
Prepared by: Jeff Tsai  
EVERLIGHT ELECTRONICS CO.,LTD.  
19-223/G6S2C-A01/2T  
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel  
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm  
Moisture Resistant Packaging  
Aluminum moisture-proof bag  
Label  
Desiccant  
Label  
Everlight Electronics Co., Ltd.  
Device No:DSE-192-042  
http://www.everlight.com  
Rev. 4  
Page: 10 of 13  
Prepared date: 25-May-2005  
Prepared by: Jeff Tsai  
EVERLIGHT ELECTRONICS CO.,LTD.  
19-223/G6S2C-A01/2T  
Reliability Test Items And Conditions  
The reliability of products shall be satisfied with items listed below.  
Confidence level：90%  
LTPD：10%  
Test  
Hours/Cycles  
Sample  
Ac/Re  
No.  
1
Items  
Test Condition  
Size  
Temp. : 260℃±5℃  
Reflow Soldering  
22 PCS.  
0/1  
0/1  
6 Min.  
Min. 5sec.  
H : +100℃ 15min  
300 Cycles  
300 Cycles  
2
Temperature Cycle  
Thermal Shock  
22 PCS.  
∫ 5 min  
L : -40℃ 15min  
H : +100℃ 5min  
3
4
22 PCS.  
22 PCS.  
0/1  
0/1  
∫ 10 sec  
L : -10℃ 5min  
High Temperature  
Storage  
Low Temperature  
Storage  
1000 Hrs.  
1000 Hrs.  
Temp. : 100℃  
Temp. : -40℃  
5
6
7
22 PCS.  
22 PCS.  
22 PCS.  
0/1  
0/1  
0/1  
DC Operating Life  
IF = 20 mA  
1000 Hrs.  
1000 Hrs.  
High Temperature /  
High Humidity  
85℃/ 85%RH  
Everlight Electronics Co., Ltd.  
Device No:DSE-192-042  
http://www.everlight.com  
Rev. 4  
Page: 11 of 13  
Prepared date: 25-May-2005  
Prepared by: Jeff Tsai  
EVERLIGHT ELECTRONICS CO.,LTD.  
19-223/G6S2C-A01/2T  
Precautions For Use  
1. Over-current-proof  
Customer must apply resistors for protection , otherwise slight voltage shift will cause big  
current change ( Burn out will happen ).  
2. Storage  
2.1 Do not open moisture proof bag before the products are ready to use.  
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.  
2.3 The LEDs should be used within a year.  
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.  
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.  
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the  
storage time, baking treatment should be performed using the following conditions.  
Baking treatment : 60±5℃ for 24 hours.  
3. Soldering Condition  
3.1 Pb-free solder temperature profile  
3.2 Reflow soldering should not be done more than two times.  
3.3 When soldering, do not put stress on the LEDs during heating.  
3.4 After soldering, do not warp the circuit board.  
Everlight Electronics Co., Ltd.  
Device No:DSE-192-042  
http://www.everlight.com  
Rev. 4  
Page: 12 of 13  
Prepared date: 25-May-2005  
Prepared by: Jeff Tsai  
EVERLIGHT ELECTRONICS CO.,LTD.  
19-223/G6S2C-A01/2T  
4.Soldering Iron  
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds  
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do  
soldering of each terminal. Be careful because the damage of the product is often started at the time of the  
hand solder.  
5.Repairing  
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a  
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether  
the characteristics of the LEDs will or will not be damaged by repairing.  
EVERLIGHT ELECTRONICS CO., LTD.  
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,  
Tucheng, Taipei 236, Taiwan, R.O.C  
Tel: 886-2-2267-2000, 2267-9936  
Fax: 886-2267-6244, 2267-6189, 2267-6306  
http://www.everlight.com  
Everlight Electronics Co., Ltd.  
Device No:DSE-192-042  
http://www.everlight.com  
Prepared date: 25-May-2005  
Rev. 4  
Page: 13 of 13  
Prepared by: Jeff Tsai  

相关型号：

19-223-R6BHC-A05-2T

 Chip LED with Bi-Color (Multi-Color)
EVERLIGHT

19-223-R6G6C-A01-2T

 Chip LED with Bi-Color(Multi-Color)
EVERLIGHT

19-223-R7BHC-A30-2T

 Chip LED with Bi-Color(Multi-Color)
EVERLIGHT

19-223-R7G6C-A01-2T

 Chip LED with Bi-Color(Multi-Color)
EVERLIGHT

19-223-S2BHC-A01-2T

 Chip LED with Bi-Color(Multi-Color)
EVERLIGHT

19-223-S2T1D-C30-2T

 Chip LED with Bi-Color(Multi-Color)
EVERLIGHT

19-223-Y2G6C-A01-2T

 Chip LED with Bi-Color(Multi-Color)
EVERLIGHT

19-223-Y2G6C-A01-2T_11

 Chip LED with Bi-Color(Multi-Color)
EVERLIGHT

19-223/R6BHC-A05/2T

 Dual Color LED, Brilliant Red/blue, Water Clear, 1.5mm, ROHS COMPLIANT, SMD, 4 PIN
EVERLIGHT

19-223/R6BHC-C03/2T

 Dual Color LED,
EVERLIGHT

19-223/R6G6C-A01/2T

 Dual Color LED, Brilliant Red/brilliant Yellow Green, Water Clear, 1.5mm, ROHS COMPLIANT, SMD, 4 PIN
EVERLIGHT

19-223/R7BHC-A30/2T

 Dual Color LED, Deep Red/blue, Water Clear, 1.5mm, ROHS COMPLIANT, SMD, 4 PIN
EVERLIGHT
©2020 ICPDF网 联系我们和版权申明