SAN.M22.GLA.7GZ [ETC]
CONN PLUG MALE 22POS SOLDER CUP;
| 型号： | SAN.M22.GLA.7GZ |
| 厂家： | 
ETC |
| 描述： | CONN PLUG MALE 22POS SOLDER CUP |
| 文件： | 总20页 (文件大小：4021K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PLASTIC
CONNECTORS
®
®
Precision modular connectors to suit your application
Since its creation in Switzerland in 1946 the LEMO Group has been recognized as a global leader of circular Push-Pull
connectors and connector solutions. Today LEMO and its affiliated companies, REDEL and COELVER, are active in more than
80 countries with the help of over 40 subsidiaries and distributors.
Over 5000 REDEL connectors
The modular design of the REDEL range provides over 5000 connectors from ø 14 mm to ø 21 mm, capable of handling cable
diameters up to 9.5 mm and up to 32 contacts.
This vast portfolio enables you to select the ideal connector configuration to suit almost any specific requirement in most
markets, including medical devices, test and measurement instruments, machinery, audio video broadcast, telecommunications
and military.
REDEL’s Push-Pull Self-Latching Connection System
This self-latching system is renowned worldwide for its easy and quick mating and unmating features. It provides absolute
security against vibration, shock or pull on the cable, and facilitates operation in a very limited space.
The REDEL self-latching system allows the
connector to be mated by simply pushing the
F
F
F
7 N
plug axially into the socket.
v
a
d
F : average latching force (without contact)
v
Once firmly latched, connection cannot be
broken by pulling on the cable or any other
component part other than the outer release
sleeve.
110 N
F : average retention force (without contact)
a
When required, the connector is disengaged
by a single axial pull on the outer release
sleeve. This first disengages the latches and
then withdraws the plug from the socket.
9 N
F : average unmating force (without contact)
d
UL Recognition
REDEL connectors are recognized by the Underwriters Laboratories (UL). The approval of the complete system (REDEL
connector, cable and your equipment) will be easier because REDEL connectors are recognized.
CE Marking
CE marking
means that the appliance or equipment bearing it complies with the protection requirements of one or
several European safety directives.
CE marking
connectors.
applies to complete products or equipment, but not to electromechanical components, such as
RoHS
REDEL connector specifications conforms the requirements of the RoHS directive (2011/65/EU) of the European Parliament
and the latest amendments. This directive specifies the restrictions of the use of hazardous substances in electrical and electronic
equipment marketed in Europe.
www.lemo.com
Cover picture: PET-IRM scanner installed in Hôpitaux Universitaires de Genève (Switzerland).
Exploded view of the REDEL SP
Straight plug
insulator + contacts
shell
backnut
cable collet
Straight plug with bend relief
backnut for
a bend relief
insulator + contacts
shell
bend relief
cable collet
Fixed socket
collet nut
shell
notched nut
insulator + contacts
front nut
Free socket
insulator + contacts
shell
backnut
cable collet
www.lemo.com
1
SP Series
The REDEL SP connectors are plastic Push-Pull connectors. These circular plastic connectors are especially adapted for
applications such as medical electronics and test & measurement. The SP series offer additional features: the latch sleeve
is recessed into the connector body ensuring greater shock resistance of the product.
The complete connector can be assembled from spare parts (even the contact configuration) therefore offering good
flexibility in stock keeping. The outer shell in Proprietary sulfone enables extensive sterilisation cycles of the product. A
large choice of bend relief is available in different colour and size. REDEL SP series connectors are not compatible with
the REDEL 1P or 2P series.
Features & Benefits
Applications
– Plastic shell made of Proprietary sulfone
– Blind mating, scoop proof
– Extended resistance to sterilisation
– Enhanced ergonomics «hand grip»
– Increased resistance to shock
– New patented Push-Pull system
– Medical electronics
– Test & measurement
– Industrial electronics
– Automotive
Standard models
Straight plugs
Fixed sockets
Free sockets
●
SR
●
SA
●
SL
●
SR
●
SA
●
SK
SK
SK
●
●
2
www.lemo.com
.
.
.
S
M
Part numbering system
.
.
.
6
S
A
N
M
1
3
G
L
A
G
Plug
Variant
Z = cable collet and nut
for fitting a bend relief
Collet nut colour table: (page 7)
Model: (pages 4-5)
Keying: (page 6)
G = grey
A = blue
J = yellow
N = black
R = red
V = green
B = white
Contact configuration (page 6)
Number of contacts: (page 6)
Collet: 3 = (cable ø 2.5 mm - 3.9 mm)
5 = (cable ø 4.0 mm - 5.2 mm)
6 = (cable ø 5.3 mm - 6.5 mm)
7 = (cable ø 6.6 mm - 7.5 mm)
Outershell colour: G = grey
N = black
B = white
Contact type: (page 7)
1)
1)
A = male to solder
C= male to crimp
L = female to solder
M= female to crimp
Insulator: L = PEEK
.
.
.
6
S
R
N
M
1
3
G
L
L
G
Free socket
Variant
Z = cable collet and nut
for fitting a bend relief
Collet nut colour table: (page 7)
Model: (pages 4-5)
Keying: (page 6)
G = grey
A = blue
J = yellow
N = black
R = red
V = green
B = white
Contact configuration (page 6)
Number of contacts: (page 6)
Collet: 3 = (cable ø 2.5 mm - 3.9 mm)
5 = (cable ø 4.0 mm - 5.2 mm)
6 = (cable ø 5.3 mm - 6.5 mm)
7 = (cable ø 6.6 mm - 7.5 mm)
Outershell colour: G = grey
N = black
B = white
Contact type: (page 7)
1)
1)
A = male to solder
C= male to crimp
L = female to solder
M= female to crimp
Insulator: L = PEEK
.
G L L G
.
S
K
N
M
1
3
Fixed socket
Front nut colour table: (page 7)
Model: (pages 4-5)
Keying: (page 6)
G = grey
A = blue
J = yellow
N = black
R = red
V = green
B = white
Contact configuration (page 6)
Number of contacts: (page 6)
Contact type: (page 8)
1)
1)
A = male to solder
C = male to crimp
1)
D= male to print
L = female to solder
N = female to print
M= female to crimp
V = female 90° for print
Outershell colour: G = grey
N = black
Insulator: L = PEEK
B = white
SAN.M13.GLA.6G Straight plug with cable collet and alignment key (N), multipole type with 13 male contacts to solder, grey
Proprietary sulfone shell, PEEK insulator, collet for max cable ø 6.5 mm and grey collet nut.
SRN.M13.GLL.6G Free socket with cable collet and alignment key (N), multipole type with 13 female contacts to solder, grey
Proprietary sulfone shell, PEEK insulator, collet for max cable ø 6.5 mm and grey collet nut.
SKN.M13.GLLG Fixed socket with two nuts and alignment key (N), multipole type with 13 female contacts to solder, grey
Proprietary sulfone shell, PEEK insulator and grey plastic front nut.
1)
Note: contacts delivered only with S or T keying (inverted contacts).
www.lemo.com
3
.
.
.
S
M
Standard models (IP50)
Fixed socket
Straight plug
6
4
2
1
5
5
4
2
1
3
3
6
1
2
3
4
5
6
Outershell
Insulator
1
2
3
4
5
6
Outershell
Latch sleeve
Backnut
Female contact
Notched nut
Front nut
Insulator
Contact
Collet nut
Cable collet
Characteristics
Value
110
Standards
Characteristics
Value
Standards
Endurance (latching)
> 2000 cycles
-50/+170°C
IP50
IEC 60512-5 test 9a
Average retention force when
pulling on the cable 1N = 0.102 kg
IEC 60512-8 test 15f
Working temperature range
(Proprietary sulfone)
–
Cable retention force (depends on
cable construction) 1N = 0.102 kg
~130
15kV
IEC 60512-9 test 17c
IEC 60601-1 (§20.1)
Protection index (mated)
IEC 60529
Electrostatic Discharge (ESD)
SAN
Straight plug, key (N) or keys (P, S and T), with cable collet
Cable ø
Part Number
min max
SAN.M .GLA.3G
2.5
4.0
5.3
6.6
3.9
5.2
6.5
7.5
••
SAN.M .GLA.5G
••
SAN.M .GLA.6G
••
SAN.M .GLA.7G
••
Note: replace
by contact configuration (see page 6).
.
• •
~46
SAN
Straight plug, key (N) or keys (P, S and T), with cable collet and nut for fitting a bend relief
Cable ø
Part Number
min max
SAN.M .GLA.3GZ
2.5
4.0
5.3
6.6
3.9
5.2
6.5
7.5
••
SAN.M .GLA.5GZ
••
SAN.M .GLA.6GZ
••
SAN.M .GLA.7GZ
••
Note: replace
by contact configuration (see page 6).
.
The bend relie•f m•ust be ordered separately (see page 10).
~48.0
SLN
Fixed socket, key (N) or keys (P, S and T), nut fixing
Contact
a
23.5
Part Number
Solder
Crimp
5.2
a max (mm)
a (mm)
2.2
0
SLN.M .GLLG
••
Note: replace
by contact configuration (see page 6).
.
• •
7.5 maxi
S12.5
Note: all dimensions are in millimeters.
4
www.lemo.com
.
.
.
S
M
SKN
Fixed socket, key (N) or keys (P, S and T) with two nuts (back panel mounting)
a
Contact
Solder
23.5
Part Number
Crimp
3
4
a max (mm)
2.2
a (mm)
0
SKN.M .GLLG
••
Note: replace
by contact configuration (see page 6).
.
• •
8.5 maxi
S12.5
SKN
Fixed socket, key (N) or keys (P, S and T) with two nuts (back panel mounting) and with straight print contact
4.1
23.5
Part Number
3
4
SKN.M .GLNG
••
Note: replace
by contact configuration (see page 6).
.
• •
8.5 maxi
S12.5
SKN
Fixed socket, key (N) or key (P) with two nuts (back panel mounting) and with elbow print contact
13
23.5
Part Number
3
4
SKN.M .GLVG
••
Note: replace
by contact configuration (see page 6).
.
• •
8.5 maxi
S12.5
2
SRN
Free socket, key (N) or keys (P, S and T), with cable collet
Cable ø
Part Number
min max
SRN.M .GLL.3G
2.5
4.0
5.3
6.6
3.9
5.2
6.5
7.5
••
SRN.M .GLL.5G
••
SRN.M .GLL.6G
••
SRN.M .GLL.7G
••
Note: replace
by contact configuration (see page 6).
.
• •
~44.7
SRN
Free socket, key (N) or keys (P, S and T), with cable collet and nut for fitting a bend relief
Cable ø
Part Number
min max
SRN.M .GLL.3GZ
2.5
4.0
5.3
6.6
3.9
5.2
6.5
7.5
••
SRN.M .GLL.5GZ
••
SRN.M .GLL.6GZ
••
SRN.M .GLL.7GZ
••
.
Note: replace
by contact configuration (see page 6).
The bend relie•f m•ust be ordered separately (see page 10).
~46.7
Note: all dimensions are in millimeters.
www.lemo.com
5
.
.
.
S
M
Alignment key
Verify the third digit of the part number in order to select the right keying.
The standard keying is «N» coded.
0
0
0
0
Keying (plug front view)
30°
60°
50°
90°
Reference
N
P
S
T
Contact type for plug
male
female
male
female
female
male
female
Contact type for socket
male
.
.
.
S
M
Insert configuration
Contact
type
Solder
Crimp
Male solder contacts
Female solder contacts
1
3
6
4
6
4
1
3
Male crimp contacts
Female crimp contacts
184)
20
1
4
3
4
3
1
2
M04
M06
M08
M10
M13
M16
M18
M22
4
1.3 1.10 1.40
0.9 0.80 1.10
0.9 0.80 1.10
0.7 0.80 0.80
0.7 0.80 0.80
0.5 0.45 0.45
0.5 0.45 0.45
0.5 0.45 0.45
1.60 0.95 11.5 1.80 1.35 11.5
1.50 1.20 8.5 1.90 1.50 8.5
•
•
•
•
•
•
•
•
•
•
•
•
22
2
1
3
6
6
4
1
3
20
22
24
6
4
1
6
8
6
8
1
20
22
24
8
1.50 0.75 5.0 1.50 1.1
1.15 0.70 4.2 1.50 1.1
1.05 0.50 4.0 1.30 0.9
0.75 0.47 3.0 1.30 0.8
0.75 0.47 2.5 1.15 0.8
0.60 0.48 2.0 1.30 0.8
5.0
4.2
4.0
3.0
2.5
1.2
3
3
1
3
8
8
1
3
224)
24
26
10
13
16
18
22
10
10
1
10
13
10
13
1
4
224)
24
26
•
4
1
5
12
12
16
1
5
28
30
32
–
16
1
18
15
18
15
1
28
30
32
–
–
4
4
1
5
22
22
18
1
28
30
32
18
5
1)
Note: depending on specific application and related standard, more restrictive operating voltage may apply (see page 15).
2)
3)
4)
shortest distance in air between two conductive parts.
shortest distance along the surface of the insulating material between two conductive parts.
for a given AWG, the diameter of some stranded conductor design is larger than the solder cup diameter (see page 14).
6
www.lemo.com
.
.
.
S
M
Outer shell material
Material
Colour
Temperature
G
N
B
Grey
Black
White
Proprietary
sulfone
-50° / +170°C
Note: adapted for sterilisation satured steam (120°C or 134°C).
.
.
.
S
M
Contact type
Select the type of contact: solder or crimp?
When should I use crimp rather than solder contacts ?
Plug
Type
solder
crimp
Male
A
Female
L1)
M1)
Soldering
recommended for small volumes
requires little amount of tooling (soldering iron)
requires more time
•
•
•
C
Socket
Type
solder
crimp
Male
A1)
–
Female
Crimping
L
M
N
V
recommended for large volumes
•
•
•
•
•
no heat is required to make the connection
for contacts with high density
D1)
print
print 90°
–
for use in high temperature environment (max. 170°C)
requires extra tooling (crimping tools)
1)
Note: only for S or T keying.
.
.
.
S
M
Colour coding
Colours
grey
blue
yellow
J
black
N
red
R
green
V
white
B
G
A
Reference
RAL code
Note: the RAL colours are indicative and depend on raw material and production process.
Colour may differ.
7001
5015
1016
9005
3020
6019
9003
Easy identification with the assistance of colour coding. Outershell is only available in grey, black or white.
www.lemo.com
7
Accessories
SAN / SLN
Insulator and male or female crimp contacts
Kit contact part
number
Kit contact part
number
Contact
nb. of
ø contact
(mm)
configuration contacts
Male
Female
SAN.M04.ZLC
SAN.M06.ZLC
SAN.M08.ZLC
SAN.M10.ZLC
SAN.M13.ZLC
SAN.M16.ZLC
SAN.M18.ZLC
SAN.M22.ZLC
SLN.M04.ZLM
SLN.M06.ZLM
SLN.M08.ZLM
SLN.M10.ZLM
SLN.M13.ZLM
SLN.M16.ZLM
SLN.M18.ZLM
SLN.M22.ZLM
M04
M06
M08
M10
M13
M16
M18
M22
4
1.3
0.9
0.9
0.7
0.7
0.5
0.5
0.5
6
8
10
13
16
18
22
male / black marking
female / black marking
SAN / SLN
Insulator with male or female solder contacts
Kit contact part
number
Kit contact part
number
Contact
nb. of
ø contact
(mm)
configuration contacts
Male
Female
SAN.M04.ZLA
SAN.M06.ZLA
SAN.M08.ZLA
SAN.M10.ZLA
SAN.M13.ZLA
SAN.M16.ZLA
SAN.M18.ZLA
SAN.M22.ZLA
SLN.M04.ZLL
SLN.M06.ZLL
SLN.M08.ZLL
SLN.M10.ZLL
SLN.M13.ZLL
SLN.M16.ZLL
SLN.M18.ZLL
SLN.M22.ZLL
M04
M06
M08
M10
M13
M16
M18
M22
4
1.3
0.9
0.9
0.7
0.7
0.5
0.5
0.5
6
8
10
13
16
18
22
male / black marking
female / black marking
l
l
SA .100. ZZ
Plug outershell kit (no contacts)
Part Number
Colours
~36
grey
white
black
SA .100.GZZ
•
SA .100.BZZ
•
SA .100.NZZ
•
Note: replace by alignment key (N, P, S or T).
•
l
ll
SR .200.
Free socket outershell kit (no contacts)
Part Number
Colours
~35
grey
white
black
SR .200.RG
•
SR .200.RB
•
SR .200.RN
•
Note: replace by alignment key (N, P, S or T).
•
l
l
l
SL .200. ZZ
Socket outershell kit (nut fixing), (no contacts)
Part Number
Colours
23.5
grey
white
black
SL .200.GZZG
•
SL .200.BZZB
•
SL .200.NZZN
•
Note: replace by alignment key (N, P, S or T).
•
8
www.lemo.com
l
l
l
SK .200. ZZ
Socket outershell kit (with two nuts), (no contacts)
Part Number
Colours
23.5
grey
white
black
SK .200.GZZG
•
SK .200.BZZB
•
SK .200.NZZN
•
Note: replace by alignment key (N, P, S or T).
•
SAN
Collet
Cable ø (mm)
Part Number
min. max.
21.5
SAN.739.RG
SAN.752.RG
SAN.765.RG
SAN.775.RG
2.5
4.0
5.3
6.6
3.9
5.2
6.5
7.5
ll
SAM.130.
Nut for fitting a GMA.1B bend relief
Part Number
Colours
SAM.130.RG
SAM.130.RB
SAM.130.RR
SAM.130.RN
SAM.130.RA
grey
white
red
20.3
black
blue
Note: only for SA , SR models.
•
•
ll
SAN.130.
Collet nut
Part Number
Colours
SAN.130.RG
grey
white
red
19.5
SAN.130.RB
SAN.130.RR
SAN.130.RN
SAN.130.RJ
SAN.130.RA
SAN.130.RV
black
yellow
blue
green
Note: only for SA , SR models.
•
•
SLN
Notched nut
Part Number
Colours
grey
18.5
SLN.240.RG
3
M14 x 1
SLN
Collet nut
Part Number
SLN.230.RG
Colours
grey
M11 x 0.75
4.5
12.5
Note: all dimensions are in millimeters.
www.lemo.com
9
l
SKN
Plastic front nut for SK models
Part Number
SKN.220.RG
Colours
18.5
grey
white
red
SKN.220.RB
SKN.220.RR
SKN.220.RN
SKN.220.RJ
SKN.220.RA
SKN.220.RV
M14 x 1
4
black
yellow
blue
green
GMA.1B Bend relief
A bend relief absorbs the angular force that may be exerted
on cables.
These are designed for plugs and free sockets with cable
collet and nut.
The Colours of these bend reliefs are not identical to the RAL
coulours of the socket’s front nut.
L
Dimensions (mm)
Temperature range
Reference
Colours
Part Number
Bend relief
Cable ø
Material
in dry atmosphere
in water steam
A
L
max. min.
A
B
G
J
blue
white
grey
GMA.1B.025.RG
GMA.1B.030.RG
GMA.1B.035.RG
GMA.1B.040.RG
GMA.1B.045.RG
GMA.1B.051.RG
GMA.1B.057.RG
GMA.1B.063.RG
2.5
3.0
3.5
4.0
4.5
5.1
5.7
6.3
34
34
34
34
34
34
34
34
2.9
3.4
3.9
4.4
5.0
5.6
6.2
7.0
2.5
3.0
3.5
4.0
4.5
5.1
5.7
6.3
yellow
brown
black
red
Silicone
elastomer
VMQ
M
N
R
S
V
-60°C, +200°C
+140°C
orange
green
Note: The last letter «G» of the part number indicates a grey colour, see the adjacent table and replace letter «G»
by the letter of the colour required. All dimensions are in millimeters
Note: the selection of pigments, which should
remain stable at high temperature, is limited by
the new regulations.
The selected solutions represent the best pos-
sible compromise.
10
www.lemo.com
Tooling
SOB.186.GN
SOB.187.GN
Spanners for nut SLN.220Rl
Spanners for nut SKN.220Rl
SOP.019.HN
Spanners with notch for securing
the notched nut
ø 20
30
28
Material: Black polyamide. For notched nut SLN.240.RG.
Material: Black polyamide
DPC.91.701.V Crimping tool
SOE
Positioners for crimp contacts
male
female
DCF
Automatic extraction tools for crimp contacts
Positioner part number
Part number extractor
Contact ø
(mm)
Conductor
AWG
Selector No
Setting
Configuration
Male contact
Female contact
Male contact
Female contact
SOE.130.VC
SOE.090.VC
SOE.070.VC
SOE.050.VC
SOE.130.VM
SOE.090.VM
SOE.070.VM
SOE.050.VM
DCF.93.131.4LT
DCF.93.090.4LT
DCF.93.070.4LT
DCF.91.050.2LT1)
DCF.93.131.4LT
DCF.93.090.4LT
DCF.93.070.4LT
DCF.91.050.2LT1)
M04
1.3
0.9
0.7
0.5
18-20
8-7
M06/M08
20-22-24
22-24-26
28-30-32
6-5-5
6-5-5
4-3-3
M10/M13
M16/M18/M22
Note: the variance in conductor stranding diameter for the minimum AWG is such that some can have a cross section which is not sufficient to guarantee crimping as per
1)
IEC 60352-2 standard. With this extractor, the user must remove the insulator from the outer shell.
www.lemo.com
11
Panel hole
l
l
For SL and SK
12.6 ± 0.05
Note: Socket mounting nut torque = 1 Nm.
All dimensions are in millimeters.
23.5 min.
PCB drilling pattern
For straight contacts
4 x ø 0.8 +0.1
0
1.1
1.1
4 x ø 0.8 +0.1
0
1.1
1.1
6 x ø 0.8 +0.1
0
1.2
1.2
8 x ø 0.8 +0.1
0
1.5
1.5
10 x ø 0.8+0.1
0
1.5
1.5
M04 (for «P» or «N» keying)
M04 (for «S» or «T» keying)
M06
M08
M10
18 x ø 0.6 +0.1
0
1.7
0.65
1.7
22 x ø 0.6 +0.1
0
1.81
1.81
0.67
16 x ø 0.6 +0.1
1.4
1.4
13 x ø 0.8 +0.1
0
1.65
1.65
0
0.65
0.67
M13
M16
M18
M22
For elbow contacts
4 x ø 0.9 +0.1
0
4 x ø 0.9 +0.1
0
6 x ø 0.7 +0.1
0
A
A
2.54 2.54
2.54 2.54 2.54
2.54 2.54 2.54
M04 (for «P» or «N» keying)
M04 (for «S» or «T» keying)
M06
10 x ø 0.7+0.1
0
13 x ø 0.7+0.1
0
8 x ø 0.7 +0.1
0
2.54
2.54
2.54 2.54 2.54
2.54 2.54 2.54 2.54
M08
M10
M13
Note: all dimensions are in millimeters
12
www.lemo.com
Assembly instructions
Solder contacts / Crimp contacts
1
2
3
5
6
7
1
2
1. Slide the collet nut O and then the collet O onto the cable.
L
Dimensions (mm)
Configuration
Solder contacts
Crimp contacts
L T
L
T
M04
11.5
13.0
13.0
12.5
3.5
3.0
3.0
2.5
15.0
15.0
15.0
14.5
3.5
3.5
3.5
2.5
M06, M08
M10, M13
M16 to M22
2. Strip the cable according to the lengths given in the table.
Tin the conductors.
T
3. Solder conductors into contacts, starting with the center
contacts, making sure that neither solder nor flux gets onto
the insulator or cable insulation.
solder / crimp
Fix the appropriate positioner in the crimping tool. Set selec-
tor to the number corresponding to the conductor AWG as
indicated on the positioner label. Fit conductor into contact
and make sure it is visible through the inspection hole in
the crimp barrel. Slide conductor-contact combination into
the open crimping tool; make sure that the contact is fully
pushed into the positioner. Close the tool. Remove from
crimping tool and check that conductor is secure in contact
and shows in inspection hole.
2
3
4. Slide the collet O forward and locate both tags O in the slots
5
6
O on the insulator O.
2
6
7
Push collet O and insulator O assembly into the shell O
3
whilst turning it to ensure that the tag O locates in the inside
slot of the shell.
1
2
1
5. Slide collet nut O over collet O and tighten the collet nut O
to the maximum torque of 0.3 Nm.
– Socket mounting nut torque = 1 Nm.
www.lemo.com
13
Technical tables
Table of American Wire Gauge
Table of wire gauges according to IEC-60228 standard
Construction
ø wire max
Wire section
Conductor no
x ø (mm)
Max ø
(mm)
Max ø
(in)
Section
(mm2)
Section
(sq in)
AWG
Strand AWG/
(mm)
(in)
(mm2)
(sq in)
nb
strand
0
1
2
4
6
8
8
259
817
259
133
133
168
133
105
37
1
24
30
26
25
27
30
29
30
26
10
28
25
20
12
30
27
22
14
34
30
29
24
16
36
34
30
30
26
18
36
32
30
28
20
34
30
22
40
36
32
24
38
34
26
40
36
28
38
30
40
32
34
36
38
40
11.277
9.702
8.89
0.444
0.382
0.35
0.274
0.217
0.175
0.173
0.13
0.115
0.103
0.091
0.093
0.10
0.082
0.081
0.073
0.082
0.065
0.062
0.062
0.059
0.061
0.052
0.05
52.90
41.40
33.20
0.0820
0.0641
0.0514
0.0335
0.0211
0.0132
0.0133
0.0082
0.0073
0.0082
0.0046
0.0048
0.0056
0.0051
0.0032
0.0030
0.0035
0.0032
0.0020
0.0020
0.0019
0.0022
0.0020
0.0013
0.0013
0.0015
0.0013
0.0014
0.0013
8.2x10-4
0.0010
7.9x10-4
8.7x10-4
8.0x10-4
5.9x10-4
5.5x10-4
5.0x10-4
3.2x10-4
3.7x10-4
3.5x10-4
3.2x10-4
2.4x10-4
2.2x10-4
2.0x10-4
1.4x10-4
1.4x10-4
1.2x10-4
8.8x10-5
7.9x10-5
5.3x10-5
5.0x10-5
3.1x10-5
2.0x10-5
1.3x10-5
7.5x10-6
196x0.40
7x2.14
125x0.40
7x1.72
1x4.50
80x0.40
7x1.38
1x3.60
84x0.30
7x1.50
1x2.76
56x0.30
7x0.86
1x2.25
50x0.25
7x0.68
1x1.78
30x0.25
7x0.52
1x1.4
32x0.20
7x0.43
1x1.15
42x0.15
28x0.20
1x1.0
28x0.15
16x0.20
1x0.80
7x0.25
1x0.60
14x0.15
7x0.20
18x0.10
14x0.10
21x0.07
14x0.10
7.50
6.10
6.00
4.90
4.50
4.70
3.95
3.60
3.70
3.15
2.76
2.80
2.58
2.25
2.15
2.04
1.78
1.60
1.56
1.40
1.35
1.29
1.15
1.20
1.15
1.00
0.95
0.90
0.80
0.75
0.60
0.75
0.65
0.50
0.40
0.40
0.40
0.295
0.240
0.236
0.192
0.177
0.155
0.155
0.141
0.145
0.124
0.108
0.110
0.098
0.082
0.084
0.080
0.070
0.062
0.061
0.055
0.053
0.050
0.045
0.047
0.045
0.039
0.037
0.035
0.031
0.029
0.023
0.029
0.023
0.019
0.015
0.015
0.015
25.00
25.00
16.00
16.00
16.00
10.00
10.00
10.00
6.00
6.00
6.00
4.00
4.00
4.00
2.50
2.50
2.50
1.50
1.50
1.50
1.00
1.00
1.00
0.75
0.75
0.75
0.50
0.50
0.50
0.34
0.28
0.25
0.22
0.14
0.11
0.09
0.09
0.0387
0.0387
0.0248
0.0248
0.0248
0.0155
0.0155
0.0155
0.0093
0.0093
0.0093
0.0062
0.0062
0.0062
0.0038
0.0038
0.0038
0.0023
0.0023
0.0023
0.0015
0.0015
0.0015
0.0011
0.0011
0.0011
7.7x10-4
7.7x10-4
7.7x10-4
5.2x10-4
4.3x10-4
3.8x10-4
3.4x10-4
2.1x10-4
1.7x10-4
1.3x10-4
1.3x10-4
6.9596
5.5118
4.4450
4.3942
3.3020
2.9210
2.6162
2.3114
2.3622
2.5400
2.0828
2.0574
1.8542
2.0828
1.6510
1.5748
1.5748
1.4986
1.5494
1.3208
1.2700
1.2700
1.3208
1.2954
1.2700
1.0414
1.0160
1.0414
1.0160
0.9906
0.8382
0.8382
0.7874
0.6604
0.6604
0.6858
0.6350
0.5588
0.5588
0.5080
0.4318
0.4318
0.4064
0.3302
0.3302
0.2794
0.2794
0.2286
0.1693
0.127
21.5925
13.5885
8.5127
8.6053
5.3204
4.7397
5.2614
2.9765
3.0847
3.6321
3.3081
2.0775
1.9413
2.2704
2.0820
1.3072
1.3174
1.2293
1.4330
1.3076
0.8234
0.8447
0.9627
0.8107
0.8967
0.8229
0.5320
0.6162
0.5067
0.5631
0.5189
0.3821
0.3547
0.3243
0.2045
0.2407
0.2270
0.2047
0.1540
0.1408
0.1281
0.0925
0.0887
0.0804
0.0568
0.0507
0.0341
0.0324
0.0201
0.0127
0.0081
0.0049
10
10
10
12
12
12 1)
12
14
14
14 1)
14
16 1)
16
16
16 1)
16
18 1)
18 1)
18
18
18
18
20 1)
20
20
20
20
22
22
22
24 1)
24
24
24
26
26
26
28 1)
28
28
30
30
32
32
34
36
38
40
37
19
7
1
41
19
7
1
65
26
19
7
1
65
42
19
16
7
0.05
0.052
0.051
0.05
0.041
0.04
1
42
19
10
7
1
19
7
0.041
0.04
0.039
0.033
0.033
0.031
0.026
0.026
0.027
0.025
0.022
0.022
0.02
0.017
0.017
0.016
0.013
0.013
0.011
0.011
0.009
0.007
0.005
0.004
0.003
1
42
19
7
1
19
7
1
19
7
1
7
1
7
1
1
1
1
1
0.1016
0.078
Note: 1) not included in the standard
14
www.lemo.com
Product safety notice
PLEASE READ AND FOLLOW ALL INSTUCTIONS CAREFULLY AND CONSULT ALL RELEVENT NATIONAL AND
INTERNATIONAL SAFETY REGULATIONS FOR YOUR APPLICATION.
IMPROPER HANDLING, CABLE ASSEMBLY, OR WRONG USE OF CONNECTORS CAN RESULT IN HAZARDOUS
SITUATIONS.
1. SHOCK AND FIRE HAZARD
Incorrect wiring, the use of damaged components, presence of foreign objects (such as metal debris), and / or residue
(such as cleaning fluids), can result in short circuits, overheating, and / or risk of electric shock.
Mated components should never be disconnected while live as this may result in an exposed electric arc and local
overheating, resulting in possible damage to components.
2. HANDLING
Connectors and their components should be visually inspected for damage prior to installation and assembly. Suspect
components should be rejected or returned to the factory for verification.
Connector assembly and installation should only be carried out by properly trained personnel. Proper tools must be used
during installation and / or assembly in order to obtain safe and reliable performance.
3. USE
Connectors with exposed contacts should never be live (or on the current supply side of a circuit). Under general
conditions voltages above 30 VAC and 42 VDC are considered hazardous and proper measures should be taken to
eliminate all risk of transmission of such voltages to any exposed metal part of the connector.
4. TEST AND OPERATING VOLTAGES
The maximum admissible operating voltage depends upon the national or international standards in force for the
application in question. Air and creepage distances impact the operating voltage; reference values are indicated in the
catalog however these may be influenced by PC board design and / or wiring harnesses.
The test voltage indicated in the catalog is 75% of the mean breakdown voltage; the test is applied at 500 V/s and the
test duration is 1 minute.
5. CE MARKING
CE marking
means that the appliance or equipment bearing it complies with the protection requirements of one or
several European safety directives.
CE marking
applies to complete products or equipment, but not to electromechanical components, such as
connectors.
6. PRODUCT IMPROVEMENTS
The LEMO Group reserves the right to modify and improve to our products or specifications without providing prior
notification.
7.
WARNING (Prop 65 State of California)
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that
cause cancer, birth defects or other reproductive harm. LEMO products are exempt from proposition 65 warnings because
they are manufactured, marketed, and sold solely for commercial and industrial use. For further information, please visit
https://www.lemo.com/quality/LEMO-Prop-65-compliance-declaration.pdf.
Disclaimers
LEMO works constantly to improve the quality of its products; the information and illustrations figuring in this document may
therefore vary and are not binding. In any case, LEMO makes no specific warranty of merchantability, fitness for a particu-
lar purpose, third party components as such or included in assembly, non-infringement, title, accuracy, completeness, or
security. The user is fully responsible for his products and applications using LEMO component.
In no event shall LEMO, its affiliates, officers, agents or employees be liable for any incidental, indirect, special or conse-
quential damages in connection with the products or services provided by LEMO, including (without limitation) loss of profits
or revenues, interruption of business, loss of use of the products or any associated equipment, materials, components or
products, damages to associated equipment or in combination with other components, materials.
Reproduction of significant portions of LEMO information in LEMO data books or data sheets is permissible only if repro-
duction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. LEMO is
not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions.
No reproduction or use without express permission of editorial or pictorial content, in any manner.
LEMO SA reserves the right to modify and improve specifications, at all times, without any notification.
www.lemo.com
15
Notes
16
www.lemo.com
LEMO complete product range
3K.
93C
2G
2C
B
S
K
T
E
F
00 01 0A 3T 4A 4M
1D
Y
05 5G
L
H
M
R
N
03
V
W
T7
P
SP
D
K/S 01 DIN
Unipole
Multipole
•
Coaxial 50 Ω
Coaxial 75 Ω
Multi Coaxial
Mixed Coax + LV
Triaxial 50 Ω
Triaxial 75 Ω
Mixed Triax + LV
Quadrax
High Voltage
Multi High Voltage
Mixed HV + LV
Fibre Optic
Multi Fibre Optic
Mixed FO + LV
Thermocouple
Fluidic
Multi Fluidic
Mixed Fluidic + LV
included in this catalogue
Most frequently used in darker colour
•
B Series Keyed
S Series
K Series Keyed
T Series
E Series
F Series Keyed
00 Series
01 Series
0A Series
3T Series
4A Series
4M Series Keyed
3K.93C Series Keyed
L Series Keyed
W Series Keyed
VAA Series
1D Series
H Series
Y Series
05 Series
5G Series Keyed
2G Series Keyed
03 Series Keyed
REDEL D Series
2C Series
M Series Keyed
R Series Keyed
N Series Keyed
V Series
Cable assembly
REDEL T7 Series
REDEL P Series Keyed REDEL SP Series Keyed
01 Series Keyed
TAA Series
No reproduction or use without express permission of editorial or pictorial content, in any manner.
LEMO SA reserves the right to modify and improve specifications, at all times, without any notification.
LEMO HEADQUARTERS
SWITZERLAND
LEMO SA
Chemin des Champs-Courbes 28 - P.O. Box 194 - CH-1024 Ecublens
Tel. (+41 21) 695 16 00 - e-mail: info@lemo.com
LEMO SUBSIDIARIES
AUSTRIA
NETHERLANDS / BELGIUM
LEMO Connectors Nederland B.V.
Jacques Meuwissenweg 6
2031 AD Haarlem
LEMO Elektronik GesmbH
Lemböckgasse 49/E6-3
1230 Wien
Tel: +43 1 914 23 20 0
Fax:+43 1 914 23 20 11
salesAT@lemo.com
Tel. +31 23 206 07 01
info-nl@lemo.com
NORWAY / ICELAND
LEMO Norway A/S
Soerumsandvegen 69,
1920 Soerumsand
Tel: +47 22 91 70 40
Fax: +47 22 91 70 41
info-no@lemo.com
BRAZIL
LEMO Latin America Ltda
Av. Dr. Adhemar de Barros,
566 – Sala 1407, Vila Adyana
CEP: 12245-011
São José dos Campos - SP - Brazil
Tel: +55 11 94242 4293
info-la@lemo.com
SINGAPORE
LEMO Asia Pte Ltd
4 Leng Kee Road,
#06-09 SiS Building
Singapore 159088
Tel: +65 6476 0672
Fax: +65 6474 0672
sg.sales@lemo.com
CANADA
LEMO Canada Inc
44 East Beaver Creek Road, unit 20
Richmond Hill, Ontario L4B 1G8
Tel: +1 905 889 56 78
Fax: +1 905 889 49 70
info-canada@lemo.com
SPAIN / PORTUGAL
IBERLEMO SAU
Brasil, 45, 08402 Granollers
Barcelona
Tel: +34 93 860 44 20
Fax: +34 93 879 10 77
info-es@lemo.com
CHINA / HONG KONG
LEMO Electronics (Shanghai) Co., Ltd
First Floor, Block E,
18 Jindian Road, Pudong
Shanghai, China, 201206
Tel: +86 21 5899 7721
Fax: +86 21 5899 7727
cn.sales@lemo.com
SWEDEN / FINLAND
LEMO Nordic AB
Gunnebogatan 30, Box 8201
163 08 Spånga
Tel: +46 8 635 60 60
Fax: +46 8 635 60 61
info-se@lemo.com
DENMARK
LEMO Denmark A/S
Mandal Allé 16A
5500 Middelfart
Tel: +45 45 20 44 00
Fax: +45 45 20 44 01
info-dk@lemo.com
SWITZERLAND
LEMO Verkauf AG
Grundstrasse 22 B,
6343 Rotkreuz
FRANCE
LEMO France Sàrl
24/28 Avenue Graham Bell
Bâtiment Balthus 4
Tel: +41 41 790 49 40
ch.sales@lemo.com
Bussy Saint Georges
77607 Marne la Vallée Cedex 3
Tel: +33 1 60 94 60 94
Fax: +33 1 60 94 60 90
info-fr@lemo.com
TAIWAN
TAOYUAN TAIWAN
Tel: +886 967 132 824
speng@lemo.com
UNITED ARAB EMIRATES
LEMO Middle East Connectors LLC
Concorde Tower 6th Floor,
Dubai Media City, P.O. Box 126732
Dubai, United Arab Emirates
Tel: +971 55 222 36 77
GERMANY
LEMO Elektronik GmbH
Hanns-Schwindt-Str. 6
81829 München
Tel: +49 89 42 77 03
Fax: +49 89 420 21 92
info@lemo.de
info-me@lemo.com
UNITED KINGDOM
HUNGARY
LEMO UK Ltd
REDEL Elektronika Kft
Nagysándor József u. 6-12
1201 Budapest
12-20 North Street, Worthing,
West Sussex, BN11 1DU
Tel: +44 1903 23 45 43
lemouk@lemo.com
Tel: +36 1 421 47 10
Fax: +36 1 421 47 57
info-hu@lemo.com
USA
LEMO USA Inc
ITALY
P.O. Box 2408
LEMO Italia srl
Rohnert Park, CA 94927-2408
Tel: +1 707 578 88 11
+1 800 444 53 66
Fax: +1 707 578 08 69
info-US@lemo.com
Viale Lunigiana 25
20125 Milano
Tel: +39 02 66 71 10 46
Fax: +39 02 37 90 80 46
sales.it@lemo.com
JAPAN
LEMO Japan Ltd
2-7-22, Mita,
Minato-ku, Tokyo, 108-0073
Tel: +81 3 54 46 55 10
Fax: +81 3 54 46 55 11
info-jp@lemo.com
LEMO DISTRIBUTORS
ARGENTINA, AUSTRALIA, BRAZIL, CHILE, COLOMBIA, CZECH REPUBLIC,
GREECE, INDIA, ISRAEL, NEW ZEALAND, PERU, POLAND, RUSSIA,
SOUTH AFRICA, SOUTH KOREA, TURKEY, UKRAINE
www.lemo.com
相关型号：
©2020 ICPDF网 联系我们和版权申明