RJ-032 [ETC]
Single 10/100 BASE-TX Filtered Connector Module; 单10/100 BASE- TX滤波连接器模块
| 型号： | RJ-032 |
| 厂家： | 
ETC |
| 描述： | Single 10/100 BASE-TX Filtered Connector Module |
| 文件： | 总3页 (文件大小：353K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NUMBER:RD-SDRJ-032
DATE : 2003/04/08 -C(REV:1)
Single 10/100 BASE-TX Filtered Connector Module
MODEL NO. : RJ-032
Features
Fully shielded magnetics protect data from internally generated digital noise
Reduces the overall length of the signal path for improved common mode
performance
Implements full common mode termination scheme with used and unused
twisted pairs
Meets IEEE802.3 Baseline Wander Compensation specification
Integrates high voltage capacitor to chassis ground
Supports all major transceivers with matched turns ration and complete
integration of specified termination
DESIGNFOR 100 BASE-TX TRANSMISSION OVER UTP-5 CABLE
OPERATING TEMP RANGE:-40 TO +85
STORAGE TEMP RANGE:-55 TO +125
PRIMARY OCL INDUCTANCE: 350uH MIN AT100KHz/0.1Vrms
8mA DC BIAS
Typical Performance Characteristics
Differential to
Isolation
Voltage
Insertion Loss
(dB MAX)
Return Loss
Common
Cross talk
(dB MIN)
CMRR
(dB Min @100Ω)
Mode Rejection
(dB MIN)
(dB MIN)
(Vrms min)
MHz
MHz
MHz
0.3~100
-35
MHz
MHz
0.3~100
-30
1500
0.3~100 100~125 0.5~40 60
80 100
20 40 60 80 100
-47 -40 -37 -35 -33
-0.8 -1.2 -18 -14.5 -12 -10
Schematic: Design on MDI Interface Circuitry
Taimag USA
55 Charles Drive Tewksbury Ma 01876
tel: 978.777.7725 fax: 978.777.4877 http://www.Taimagusa.com
NUMBER:RD-SDRJ-032
DATE : 2003/04/08 -C(REV:1)
Dimension: mm
TOLERANCE: ±0.30
Ordering Information
RJ
– 032
RJ45
Series NO.
Taimag USA
55 Charles Drive Tewksbury Ma 01876
tel: 978.777.7725 fax: 978.777.4877 http://www.Taimagusa.com
NUMBER:RD-SDRJ-032
DATE : 2003/04/08 -C(REV:1)
Requirements
1.Design and Construction
Product shall be of design, construction and physical dimensions specified on
applicable product drawing.
2.Materials and Finish
A. Contact:
RJ Contact : Phosphor Bronze, Thickness=0.30mm
Finish : (a) Contact Area : 30µ”min. Gold
(b) Solder tail Area : 100µ”min. Tin/Lead(9:1)
(c) Under plating : 50µ”min. Nickel over all
RJ Joint Contact : Brass, Thickness=0.35mm
Finish : 100µ”min. Tin/Lead(9:1) over 50µ”min. Nickel
B. Plastic Part :
(1) Set Housing : Thermoplastic, PBT, Black
UL FILE NO. : E130155
Manufacturer : NAN YA PLASTICS CORP.
Grade :1403G3
Flame Class : UL 94V-0
(2) Insert : Thermoplastic, PBT, Black
UL FILE NO. : E130155
Manufacturer : MITSUI Petrochemical Industries
Grade : CH230N
Flame Class : UL 94V-0
(3) Spacer : Thermoplastic, PBT, Black
UL FILE NO. : E130155
Manufacturer : NAN YA PLASTICS CORP.
Grade : 1403G3
Flame Class : UL 94V-0
C. Shield Material :
Cartridge t=0.25mm
10µ”-20µ” Thick Nickel over 10µ”-20µ” min Thick Nickel
3. Ratings
(1) Voltage rating : 125 VAC
(2) Current rating : 1.5A
Durability :
1000 cycles with no function damage for RJ-45 . Abnormalities shall be
present after the test.
Low Level Contact Resistance : ∆R=300mΩ maximum (final)
The sample should be mounted in the tester and fully mated and unmated
500 times per hour at the rate of 25mm/min.
EIA-364-09C.
Taimag USA
55 Charles Drive Tewksbury Ma 01876
tel: 978.777.7725 fax: 978.777.4877 http://www.Taimagusa.com
相关型号：
©2020 ICPDF网 联系我们和版权申明