PS-55JD1-005H0 [ETC]
Analog IC ; 模拟IC\n型号: | PS-55JD1-005H0 |
厂家: | ETC |
描述: | Analog IC
|
文件: | 总4页 (文件大小:64K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PS-55J01 SERIES
28 VIN DC/DC CONVERTERS - 50 Watt Single Output
- 50 Watt Dual Output
LOGITEK
A Subsidiary of NAI, Inc.
Features
• High Power Density, Low Profile Packaging
• Full Output Power at +100°C Baseplate Temperature
• Switching Power Supply – Low Noise
• ESS Screening (Burn-In) and Temperature Cycling
• Designed and Manufactured Per NAVMAT Guidelines
• Full-Mil and COTS-Mil-Type Versions (form, fit, and function identical)
• EMI Filtering Designed to MIL-STD-461C
• Remote Error Sensing
• Remote Digital (TTL) Turn On/Off
• Transient Protection per MIL-STD-704D
Contents
Description
Specifications............................................ 1
Electrical................................................. 1
Physical/Environmental.......................... 2
Output Power (Table 1) ............................ 2
Pinout Designations (J1) (Table 2)........... 2
Connector Specifications ........................... 2
Output Wiring Diagram............................. 3
Mechanical Layout.................................... 3
Mechanical Dimensions (Table 3) ............ 4
Ordering Information................................ 4
Logitek's PS-55 Series is a family of high power density, low pro-
file, 28 VIN DC/DC switch mode converters. This family extends
from 25 Watt through 150 Watt in single, dual, and triple configura-
tions. The PS-55 Series is ideally suited for airborne, shipboard,
ground mobile and C3I applications. All Logitek DC/DC Converters
and Power Supplies are designed and qualified to the most stringent
performance and environmental requirements. Full-Mil units receive
ESS Screening, including burn-in and temperature cycling.
Electrical Specifications
DC Input Characteristics:
Input
16 to 36 VDC; 40 VDC maximum with no damage (50 VDC maximum – Optional)
EMI/RFI Characteristics
Input Transient Protection
Designed to meet the requirements of MIL-STD-461C
Per MIL-STD-704D and MIL-STD-461C, CS06
DC Output Characteristics:
Output Power
50 Watts, See Table 1
Output Voltage
Efficiency
5 VDC to 28 VDC, See Table 1
72% minimum
Line Regulation
Load Regulation
PARD (Noise and Ripple)
Within 0.1% for low to high line changes at constant load
0.1% for 0 to 100% of rated load at nominal input line
50 mV p-p typical; 100 mV p-p maximum for 5V outputs (20 MHz bandwidth); 1% of the
output voltage, with a maximum of 200 mV p-p, for all other outputs (20 MHz bandwidth)
Load Transient Recovery
Output voltage returns to regulation limits within 0.5 msec (typical), half to full load
Load Transient Under/Overshoot
0.35 Volt maximum from nominal output voltage set point for 3.3 V and 5.0 V outputs, all
other outputs are 5%.
LOGITEK, A Subsidiary of NAI, Inc.
170 Wilbur Place, Bohemia, NY 11716
631.567.1100 / 631.567.1823 (Fax)
www.naii.com e-mail: sales@naii.com
55J01A001
Rev. B 1.0
Page 1 of 4
DC Output Characteristics (Continued):
Short Circuit Protection
Under any short circuit condition, output voltage drops to less than 1 volt, with automatic recovery
Current Limiting
120% ±10% typical
OverVoltage Protection
Remote Error Sensing
Remote Turn On/Off
Isolation Voltage
Automatic electronic shutdown if voltage exceeds 125% ±10%
Compensates for up to 0.5-volt drop on output leads
TTL logic 1 inhibits (turns off) the output; a floating input acts as a logic 0 (output on)
500 VDC input to output and input to case; 100 VDC output to case.
50 Megohm at 50 VDC
Insulation Resistance
Physical/Environmental Specifications
Temperature Range
Operating: -55°C to +100°C at 100% load (Temperature measured at baseplate; conduction
via baseplate only); Storage: -55°C to +125°C
Temperature Coefficient
Shock
0.01% per °C
30 G’s each axis, per MIL-STD-810C, Method 516.2, Procedure 1. Hammer shock per
MIL-S-901C
Acceleration
Vibration
Reliability
Humidity
Altitude
6 G’s per MIL-STD-810C, Method 513.2, Procedure 11, and 14 G’s per Procedure 1
Per MIL-STD-810C, Method 514.2, Procedure 1A
(MTBF) 200,000 hours, ground benign, at 50°C baseplate
95% at 71°C per MIL-STD-810C, Method 507.1 (non-condensing)
40,000 feet per MIL-STD-810C, Method 504.1, Category 6 Equipment
See Table 3
Dimensions
Salt Fog
Per MIL-STD-810C, Method 509.1
Sand/Dust/Fungus
Enclosure
Finish
Per MIL-STD-810C
Aluminum housing to aluminum baseplate
Cover: Black anodized; Baseplate: chemfilm
Interface
Connections via a D-subminiature connector per Page 2 of this Data Sheet
Single Output = 9 ounces; Dual Output = 10 ounces
Weight
Table 1. Output Power
Table 2. Pinout Designations (J1)
Single
Dual
Pin
1
2
3
4
5
6
7
8
Single
+INPUT
+INPUT
-TTL (ON/OFF)
Dual
-INPUT
Pin
9
Single
-INPUT
-INPUT
CHAS GND CHAS GND
+SENSE
-SENSE
+OUTPUT
-OUTPUT
Dual
+INPUT
N/C
Volts Amps Volts Amps
5.0
6.5
12.0
15.0
24.0
28.0
10.0
7.6
4.2
3.4
2.1
1.8
5.0
2.1
1.7
N/C
10
11
12
13
14
15
±5.0
±12.0
±15.0
-TTL (ON/OFF)
+TTL (ON/OFF)
+TTL (ON/OFF)
-SENSE 1
-OUTPUT 1
-SENSE 2
+OUTPUT
+OUTPUT
-OUTPUT
-OUTPUT
+SENSE 1
+OUTPUT 1
+SENSE 2
-OUTPUT 2
+OUTPUT 2
Connector Specifications
Connector
Part Number - Series
DAMME15PR
Unit Connector
Mating Connector
DAMM15S
LOGITEK, A Subsidiary of NAI, Inc.
170 Wilbur Place, Bohemia, NY 11716
631.567.1100 / 631.567.1823 (Fax)
www.naii.com e-mail: sales@naii.com
55J01A001
Rev. B 1.0
Page 2 of 4
Output – Wiring Diagram
Single Output
(HIGH)
+OUT
+INPUT
-INPUT
DC INPUT
(RETURN)
+SENSE
-SENSE
LOAD
-OUT
+TTL
-TTL
ON/OFF CONTROL
CHASSIS GROUND
Dual Output
+OUT 1
+SENSE 1
-SENSE 1
LOAD
LOAD
(HIGH)
DC INPUT
(RETURN)
-OUT 1
+OUT 2
+INPUT
-INPUT
+SENSE 2
-SENSE 2
+TTL
-TTL
ON/OFF CONTROL
-OUT 2
CHASSIS GROUND
Mechanical Layout
4 – 40 UNC-2B x 0.25 DEEP
TYPICAL 4 PLACES
PIN 1
F
B
L
J1
H
G
D
E
W
C
A
TOP
BOTTOM
Mechanical Dimensions – See Table 3 (following)
LOGITEK, A Subsidiary of NAI, Inc.
170 Wilbur Place, Bohemia, NY 11716
631.567.1100 / 631.567.1823 (Fax)
www.naii.com e-mail: sales@naii.com
55J01A001
Rev. B 1.0
Page 3 of 4
Table 3. Mechanical Dimensions
Case*
Units
Inches
mm
W
2.5
L
3.5
A
B
F
1
1
2
2
2.100
53.34
2.600
66.04
3.100
78.74
3.450
87.63
1.25
31.8
1.50
38.1
63.5
3.00
76.20
88.9
3.85
97.79
Inches
mm
*Use Case 1 for Single Output Converter; Use Case 2 for Dual Output Converter
Notes
Dimensions C & D: 0.2” (5.1 mm)
Dimension E: 0.23” (5.84 mm)
Dimension G: 0.455” (11.56 mm)
Dimension H: 0.8” (20.3 mm)
Ordering Information for PS-55J01 Series (50 Watt DC/DC Converter)
55 J D1 - 005 H 0 - XX
CODE (Used only for “Specials”)
OPTIONS: 0 = Standard Testing (Includes ESS Temperature Cycling per NAVMAT)
1 = Standard Testing plus ESS Vibration Testing (per NAVMAT)
RELIABILITY:
H = Full-Mil: -55°C to +100°C, Hi-Rel Mil Grade Components, Designed to meet the require-
ments of MIL-STD-461C, Designed to meet the requirements of MIL-STD-810C, Designed
per NAVMAT Guidelines.
M = COTS-Mil-Type: -55°C to +100°C, Mil-Type Components, Designed to meet the
Requirements of MIL-STD-461C, Designed to meet the requirements of MIL-STD-810C,
Designed per NAVMAT Guidelines.
OUTPUT VOLTAGE(s): Single Output
Dual Output
005 = ±5 V
012 = ±12 V
015 = ±15 V
005 = 5 V
006 = 6.5 V
012 = 12V
015 = 15 V
024 = 14 V
028 = 28 V
000 = Special Voltage –
See Code Table Below
OUTPUTS: S1 = Single
D1 = Dual
WATTAGE: J = 50 W
SERIES: 55 = DC/DC (Low Voltage)
Example: 55JS1-005H1 = DC /DC (Low Voltage); 50 Watt; Single Output; +5 V; Full-Mil-Type; ESS Vibration Testing
55JD1-012M0 = DC /DC (Low Voltage); 50 Watt; Dual Output; ±12 V; COTS-Mil-Type; Standard Testing
Consult Factory for Additional Options and/or Special Units
Code Table for “Specials”
Code Table for Special Voltages (Where Applicable)
LOGITEK, A Subsidiary of NAI, Inc.
170 Wilbur Place, Bohemia, NY 11716
631.567.1100 / 631.567.1823 (Fax)
www.naii.com e-mail: sales@naii.com
55J01A001
Rev. B 1.0
Page 4 of 4
相关型号:
©2020 ICPDF网 联系我们和版权申明