PMODUSBUART_RM [ETC]

PmodUSBUART™ Reference Manuall; PmodUSBUARTâ ?? ¢参考手册册
PMODUSBUART_RM
型号: PMODUSBUART_RM
厂家: ETC    ETC
描述:

PmodUSBUART™ Reference Manuall
PmodUSBUARTâ ?? ¢参考手册册

文件: 总1页 (文件大小:190K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
PmodUSBUART™  
Reference Manual  
Revision: August 30, 2011  
1300 NE Henley Court, Suite 3  
Pullman, WA 99163  
(509) 334 6306 Voice | (509) 334 6300 Fax  
Note: This document applies to REV A of the board.  
Overview  
The PmodUSBUART module provides a USB  
to UART interface powered by the FTDI  
FT232RQ. This Pmod is designed to be a  
direct replacement for the PmodRS232 and  
serial-to-USB cable combination.  
Features include:  
USB to serial UART interface  
option to power the system board  
through the FTDI chip  
Functional Description  
SYS3V3 Select (Header JP1)  
The PmodUSBUART uses the standard 6-pin  
connector to connect to the host device and a  
micro USB connector to connect to a PC or  
other USB-capable device. The FTDI chip then  
converts the signal from UART to USB and  
vice-versa.  
The board attached to the PmodUSBUART  
can have its 3.3V rail powered by the header  
JP1. If jumper JP1 is set to SYS, then the  
SYS3V3 pin is powered by the VCC outputted  
by the FTDI chip. If the board attached to the  
PmodUSBUART is powered on its own, the  
jumper should be set to LCL.  
Interface  
LEDs  
The UART connector allows UART  
communications to go from the FTDI chip to  
the connected board. Note that the  
There are two LED indicators on the  
PmodUSBUART. LD1 indicates a data  
transfer from the micro-USB connector (J1) to  
the UART connector (J2). LD2 indicates a  
data transfer from the UART connector (J2) to  
the micro-USB connector (J1).  
PmodUSBUART uses the new Digilent UART  
pin configuration and requires the UART  
Crossover cable in order to use older boards.  
To see what configuration your board has, see  
your board’s page at http://digilentinc.com.  
Connector J2 – UART Communications  
Pin  
1
Signal  
RTS  
RXD  
Description  
Ready to Send  
Receive  
2
3
TXD  
CTS  
Transmit  
4
Clear to Send  
Ground  
Power Supply (3.3V)  
5
6
GND  
SYS3V3  
Doc: 502-212  
page 1 of 1  
Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trademarks of their respective owners.  

相关型号:

PMOH004

Precision compensated pressure sensors
SENSORTECHNIC

PMOH004H

Precision compensated pressure sensors
SENSORTECHNIC

PMOH004P

Precision compensated pressure sensors
SENSORTECHNIC

PMOH010H

Precision compensated pressure sensors
SENSORTECHNIC

PMOH010P

Precision compensated pressure sensors
SENSORTECHNIC

PMOP001H

Precision compensated pressure sensors
SENSORTECHNIC

PMOP001P

Precision compensated pressure sensors
SENSORTECHNIC

PMOP005H

Precision compensated pressure sensors
SENSORTECHNIC

PMOP005P

Precision compensated pressure sensors
SENSORTECHNIC

PMOP015AH

Precision compensated pressure sensors
SENSORTECHNIC

PMOP015AP

Precision compensated pressure sensors
SENSORTECHNIC

PMOP015H

Precision compensated pressure sensors
SENSORTECHNIC