PA0510025C [ETC]
TUBE NYLON 10MM BLUE 25M ; 尼龙管10MM BLUE 25M\n
| 型号： | PA0510025C |
| 厂家： | 
ETC |
| 描述： | TUBE NYLON 10MM BLUE 25M
|
| 文件： | 总5页 (文件大小：76K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Tubing & Hose
Metric
Nylon, Polyurethane,
Polyester Reinforced PVC,
Metal Braided Rubber, Copper,
Double Wall Brazed Steel
● Available in a variety of different types to suit a
wide range of applications
● All tubing can be used with specific ranges of tube
fittings
● Nylon and polyurethane tube available in several
colours for ease of identification
Technical Data
Medium:
Compressed air
(Consult our Technical Service for use with other fluids)
Operating Pressure:
Refer to specific tubing type on the following pages
Operating Temperature:
Refer to specific tubing type on the following pages
Tube Sizes
Nylon: 4, 5, 6, 8, 10, 12, 14, 16, 22, 28 mm O/D
Ordering Information
Polyurethane: 4, 5, 6, 8, 10, 12 O/D
To order, quote appropriate product number
from the tables on the following pages.
When ordering Polyester reinforced PVC
hose state the length of hose required.
Polyester reinforced PVC hose: 3, 5, 6.3, 8, 10, 12.5,
19, 25 mm I/D
Polyester reinforced PVC hose assemblies: 4, 5, 6, 8, 10,
12, 16, 22, 28 O/D
Metal Braided: 4, 5, 6, 8, 10, 12, 28 mm
Copper – half hard and annealed: 4, 5, 6, 8, 10,
12, 16, 22, 28 mm O/D
Double Wall Brazed Steel: 4, 6, 8, 10, 12 mm O/D
Materials
Nylon tube: nylon (polyamide) type 11 or 12 fully plasticised
Polyurethane
Polyester reinforced PVC: high quality electrically non-
conductive plasticised PVC hose, high tensile polyester fibre
braiding, galvanised steel ‘O’ clips and brass tailpieces on
assembled hoses
Metal braided hose: E90 nitrile rubber hose, galvanised steel
braiding wire, brass ferrules, copper tailpieces
Copper tube: phosphorous de-oxidised non arsenical copper to
BS6017 grade Cu-DHP
Double wall brazed steel: copper coated steel strip with plated
external surface
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
08/97
N/AL 9.12.001.01
Metric Tubing and Hose
General Information – Metric Nylon Tubing
To DIN Standards 73378 and 74324
O/D I/D
tube tube
Product number
Natural
Black
Blue
Brown
(mm) (mm) 15 m coil
25 m coil
100 m coil
PA0004100
PA0005100
PA0006100
PA0008100
PA0010100
PA0012100
PA0014100
–
15 m coil
25 m coil
PA0704025*
PA0705025*
PA0706025*
PA0708025*
PA0710025*
PA0712025*
PA0714025
–
100 m coil
PA0704100
PA0705100
PA0706100
PA0708100
PA0710100
PA0712100
PA0714100
–
15 m coil
25 m coil
PA0504025*
PA0505025*
PA0506025*
PA0508025*
PA0510025*
PA0512025*
PA0514025
–
100 m coil
PA0504100
PA0505100
PA0506100
PA0508100
PA0510100
PA0512100
PA0514100
–
100 m coil
4
2,5
3,0
4,0
6,0
7,5
9,0
PA0004015*
PA0005015*
PA0006015*
PA0008015*
PA0010015*
PA0012015*
PA0014015
PA0016015
PA0022015
PA0028015
PA0004025*
PA0005025*
PA0006025*
PA0008025*
PA0010025*
PA0012025*
PA0014025
PA0016025
PA0022025
PA0028025
PA0704015*
PA0504015*
PA0404100
5
PA0705015*
PA0505015*
PA0405100
6
PA0706015*
PA0506015*
PA0406100
8
PA0708015*
PA0508015*
-
-
-
-
-
-
-
10
12
PA0710015*
PA0510015*
PA0712015*
PA0512015*
14† 11,0
16 12,0
–
–
–
–
–
–
–
–
22† 17,0
28† 22
–
–
–
–
–
–
–
–
–
–
O/D I/D
tube tube Red
(mm) (mm) 15 m coil
Product number
Corporate
Red
25m coil
Corporate
Grey
25m coil
Yellow
15 m coil
Green
15 m coil
25 m coil
100 m coil
25 m coil
100 m coil
25 m coil
100 m coil
4
5
2,5
3,0
PA0104015* PA0104025* PA0104100
PA0105015* PA0105025* PA0105100
PA0304015* PA0304025* PA0304100
PA0305015* PA0305025* PA0305100
PA0204015* PA0204025* PA0204100
PA0205015* PA0205025* PA0205100
PA0804025 PA0604025
-
-
6
4,0
6,0
7,5
9,0
PA0106015* PA0106025* PA0106100
PA0108015* PA0108025* PA0108100
PA0110015* PA0110025* PA0110100
PA0112015* PA0112025* PA0112100
PA0306015* PA0306025* PA0306100
PA0308015* PA0308025* PA0308100
PA0310015* PA0310025* PA0310100
PA0312015* PA0312025* PA0312100
PA0206015* PA0206025* PA0206100
PA0208015* PA0208025* PA0208100
PA0210015* PA0210025* PA0210100
PA0212015* PA0212025* PA0212100
PA0806025 PA0606025
PA0808025 PA0608025
8
10
12
-
-
-
-
-
-
14† 11,0
–
PA0114025 PA0114100
–
PA0314025
PA0314100
–
PA0214025
PA0214100
Coils are supplied in polythene bags. Those coils marked * can also be supplied in boxes at nominal extra cost, add ‘C’ to end of product number.
†Do not conform to above standards. 22 mm and 28 mm O/D tubing conforms to BS 5409 Part 1, Table 2.
Other colours can be supplied for orders of sufficient quantity.
This standard range of nylon tubing can be supplied in longer lengths to order, provided that a minimum economic production quantity is ordered.
Maximum working pressures
Working pressure/temperature conversion factors
O/D
I/D
Maximum working pressure (bar) Minimum bend radius (mm)
Working temperature °C
–40°C to +20°C
+30°C
+40°C
+50°C
Factor
1,00
0,83
0,75
0,64
0,57
0,47
tube (mm) tube (mm) at –40°C to +20°C
4
2,5
3,0
4,0
6
28
31
25
19
24
18
15
18
15
15
25
25
30
50
60
75
80
95
125
160
5
6
+60°C
+80°C
8
10
12
14
16
22
28
7,5
9,0
11,0
12,0
17,0
22,0
To calculate working pressures at various temperatures, multiply
working pressure at –40°C to +20°C by factor given in table.
Maximum continuous working temperature +80°C.
Polyurethane Tubing
O/D
tube
I/D
Product number
tube Natural
Black
Blue
Red
Yellow
Green
(mm) (mm) 25 m coil
100 m coil
25 m coil
100 m coil
25 m coil
100 m coil
PU0504100
PU0505100
PU0506100
PU0508100
PU0510100
PU0512100
25 m coil
100 m coil
25 m coil
100 m coil
4
2,5
3,0
4,0
5,5
7,0
8,0
PU0004025 PU0004100
PU0005025 PU0005100
PU0006025 PU0006100
PU0008025 PU0008100
PU0010025 PU0010100
PU0012025 PU0012100
PU0704025
PU0705025
PU0706025
PU0708025
PU0710025
PU0712025
PU0704100 PU0504025
PU0705100 PU0505025
PU0706100 PU0506025
PU0708100 PU0508025
PU0710100 PU0510025
PU0712100 PU0512025
PU0104025
PU0105025
PU0106025
PU0108025
PU0110025
PU0112025
PU0104100 PU0304025 PU0304100
PU0105100 PU0305025 PU0305100
PU0106100 PU0306025 PU0306100
PU0108100 PU0308025 PU0308100
PU0110100 PU0310025 PU0310100
PU0112100 PU0312025 PU0312100
5
6
8
PU0208100
PU0210100
PU0212100
10
12
Coils are supplied in polythene bags. All of these coils can be supplied in boxes at nominal extra cost, add ‘C’ to end of product number.
This standard range of polyurethane tubing can be supplied in longer lengths to order, provided that a minimum economic production quantity is ordered.
Maximum working pressures
Working pressure/temperature conversion factors
O/D
I/D
Maximum working pressure (bar) Minimum bend radius (mm)
Working temperature °C
–40°C to +20°C
+30°C
Factor
1,00
0,85
0,70
0,60
0,50
tube (mm) tube (mm) at –40°C to +20°C
4
2,5
3,0
4,0
5,5
7,0
8,0
10
11
9
6
5
7
+40°C
6
9
+50°C
8
9
16
17
25
+60°C
10
12
9
To calculate working pressures at various temperatures, multiply
working pressure at –40°C to +20°C by factor given in table.
9
Maximum continuous working temperature +60°C.
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
N/AL 9.12.001.02
08/97
Metric Tubing and Hose
Polyester reinforced PVC hose
Flexible hose assemblies
Product
Number*
A O/D
tailpiece
B
Max (bar) Min
working bend
pressure radius
C
hose
I/D
D
hose
O/D
42 0200 00 000
42 0210 00 000
42 0220 00 000
42 0230 00 000
4
5
6
8
19,0
21,5
23,0
26,0
28,0
30,0
34,8
42,0
51,0
10
10
10
10
10
10
9
28
3
8
‘O’ Clip
To Order
B
28
3
8
31,5
31,5
48,5
48,5
50,5
70
6,3
6,3
10
10
12,5
19
25
12
12
16
16
19
27
33
42 0240 00 000 10
42 0250 00 000 12
42 0260 00 000 16
42 0270 00 000 22
42 0280 00 000 28
7
6
225
Operating temperature: –20°C to +70°C.
For use at temperatures above +70°C consult our Technical Service.
*State the length of hose required when ordering. Maximum length 30m.
Polyester reinforced PVC hose
30m coils
Product
Number
Hose Min. Hose Max (bar) ‘O’ clip
bore bend working product
radius O/D pressure number
Ø
PV2008030 3
PV2010030 5
PV2012030 6,3
PV2014030 8
PV2016030 10
25,0
8
10
10
10
48 0168 02
48 0168 03
48 0168 04
48 0168 05
48 0168 06
48 0168 07
48 0168 11
48 0168 15
28,0 10
31,5 12
38,0 13,5 10
48,5 16
10
9
PV2019030 12,5 50,5 18,5
PV2027030 20
PV2033030 25
70,0 27
225 33
7
6
Pincers
A special pair of pincers, product number 39 0014 00, is available for crimping ‘O’ clips to hose.
Instructions
1. Cut off the desired length of hose
2. Insert reusable tailpieces
3. Slip on the ‘O’ clips
4. Clamp tightly with pincers
Our policy is one of continuous research and development. We therefore reserve the right
08/97
N/AL 9.12.001.03
to amend, without notice, the specifications given in this document.
Metric Tubing and Hose
Metal Braided Rubber Hose
Flexible hose assemblies
Metal braided rubber hoses are suitable for use with petrol, diesel fuel, paraffin and other liquids to pressures stated in
the tables below. They are also suitable for use with compressed air up to a maximum working pressure of 10 bar. The
maximum working pressures quoted in these tables have been taken under ideal conditions with non-pulsating
pressures when used with compression tube fittings, see Section 9.6.
Working temperature range -20°C to +100°C
Product
Number
A
O/D
tube
B
C
E
Min
Max (bar)
Product
Number
A
O/D
tube
B
C
E
Min
Max (bar)
B
C
B
A/F bend working
radius pressure
A/F bend working
radius pressure
42 0020 00 000
4
19
*
13 34
69
69
69
69
69
69
69
69
69
69
69
69
69
69
69
69
69
69
69
69
69
69
69
69
69
69
69
42 0050 00 000
8
26
*
17 39
69
69
69
69
69
69
69
69
69
69
69
69
69
69
69
69
69
69
47
47
47
47
47
47
47
47
47
42 0020 00 250 4
19 250 13 34
19 300 13 34
19 350 13 34
19 400 13 34
19 500 13 34
19 600 13 34
19 750 13 34
19 1000 13 34
42 0050 00 250 8
26 250 17 39
26 300 17 39
26 350 17 39
26 400 17 39
26 500 17 39
26 600 17 39
26 750 17 39
26 1000 17 39
42 0020 00 300
42 0020 00 350
42 0020 00 400
42 0020 00 500
42 0020 00 600
42 0020 00 750
42 0020 01 000
42 0030 00 000
42 0030 00 250
42 0030 00 300
42 0030 00 350
42 0030 00 400
42 0030 00 500
42 0030 00 600
42 0030 00 750
42 0030 01 000
42 0040 00 000
42 0040 00 250
42 0040 00 300
42 0040 00 350
42 0040 00 400
42 0040 00 500
42 0040 00 600
42 0040 00 750
42 0040 01 000
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
42 0050 00 300
42 0050 00 350
42 0050 00 400
42 0050 00 500
42 0050 00 600
42 0050 00 750
42 0050 01 000
8
8
8
8
8
8
8
E
21
*
13 34
42 0060 00 000 10
42 0060 00 250 10
42 0060 00 300 10
42 0060 00 350 10
42 0060 00 400 10
42 0060 00 500 10
42 0060 00 600 10
42 0060 00 750 10
42 0060 01 000 10
42 0070 00 000 12
42 0070 00 250 12
42 0070 00 300 12
42 0070 00 350 12
42 0070 00 400 12
42 0070 00 500 12
42 0070 00 600 12
42 0070 00 750 12
42 0070 01 000 12
28
*
19 39
21 250 13 34
21 300 13 34
21 350 13 34
21 400 13 34
21 500 13 34
21 600 13 34
21 750 13 34
21 1000 13 34
28 250 19 39
28 300 19 39
28 350 19 39
28 400 19 39
28 500 19 39
28 600 19 39
28 750 19 39
28 1000 19 39
*State length of hose required if ordering non-standard lengths.
Minimum length 155mm.
23
*
14 35
30
*
22 51
23 250 14 35
23 300 14 35
23 350 14 35
23 400 14 35
23 500 14 35
23 600 14 35
23 750 14 35
23 1000 14 35
30 250 22 51
30 300 22 51
30 350 22 51
30 400 22 51
30 500 22 51
30 600 22 51
30 750 22 51
30 1000 22 51
When installing a flexible hose the following simple rules should
be noted.
1. Flexible hose is weakened when installed in a twisted
position.
2. Ample bend radius should be allowed to avoid collapsing the
hose.
3. When hose is installed in a flexing application remember that
metal end fittings are not part of the flexible portion.
4. Use elbows or adaptors to eliminate excess hose bends.
Double Wall Brazed Steel Tube
Double wall brazed steel tubing is constructed from copper coated steel strip which is rolled twice around laterally,
then furnace brazed to produce a tube of double wall structure, with a clear, scale free coppered bore, a plated
external surface and a consistently uniform wall thickness.
Product
Number
3m straight size
(10ft)
O/D Inside
tube diameter bend working
Min
Max
radius pressure (bar)
(min) at 20°C*
BU6304003
BU6306003
BU6308003
4
6
8
2,6
4,6
6,6
8,6
10,6
10
13
19
22
44
380
300
250
195
160
BU6310003 10
BU6312003 12
Tolerance on outside diameters is –0,07 mm to +0,05 mm.
*Maximum working pressures stated are for tubes of
straight length, with non-pulsating pressures when used
with Enots compression tube fittings.
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
N/AL 9.12.001.04
08/97
Metric Tubing and Hose
Copper Tubing
The following technical information is valid for copper tube when used with compression fittings, see Section 9.5.
For further information please consult our Technical Service.
Standard Duty: Annealed
Standard Duty: Half Hard
Product
Number
10m coils size size
O/D I/D Wall
tube tube thickness bend safe working
Min Recommended
Product
Number
3m straight size size
O/D I/D Wall
tube tube thickness bend safe working
Min Recommended
radius pressure (bar)
-200°C to +50°C
radius pressure (bar)
-200°C to +50°C
CS6004010 4
2,8 0,6
3,4 0,8
4,4 0,8
6,4 0,8
12
15
19
24
30
128
138
112
81
CS7004003 4
2,8 0,6
3,4 0,8
4,0 1,0
6,0 1,0
12
15
19
24
30
40
48
67
86
193
208
218
157
150
122
89
CS6005010 5
CS6006010 6
CS6008010 8
CS7005003 5
CS7006003 6
CS7008003 8
CS6010010 10 8,4 0,8
3m straight
64
CS7010003 10 7,6 1,2
CS7012003 12 9,6 1,2
CS7016003 16 13,6 1,2
CS7022003 22 19,0 1,5
CS7028003 28 25,0 1,5
CS6012003 12 9,6 1,2
CS6016003 16 13,6 1,2
CS6022003 22 19,0 1,5
CS6028003 28 25,0 1,5
40
48
67
86
81
59
53
41
81
62
Manufactured to BS 2871: Part 2 with dimensions
generally to Table 4.
Tolerances on O/D are +0,00mm to –0,08mm.
Manufactured to BS 2871: Part 2 with dimensions
generally to Table 4.
Tolerances on O/D are +0,00mm to –0,08mm.
The recommended safe working pressures are calculated in accordance with BS1306 with a
stress value of 62N/mm2 and minimum tube wall thickness. For safe working pressures at
temperatures other than -200°c to +50°C refer to Pressure De-rating Factor table below.
The recommended safe working pressures are calculated in accordance with BS1306 with a stress
value of 41N/mm2 and minimum tube wall thickness. For safe working pressures at temperatures
other than -200°c to +50°C refer to Pressure De-rating Factor table below.
Tube Cutter - Plastic Tubing
Copper Tubing Pressure De-rating Factor
For temperatures other than -200°C to +50°C
Tube
-200°C +50°C +100°C +150°C +175°C
to to to to to
+50°C +100°C +150°C +175°C +200°C
Product
Number
Description
Tube cutter
M/3314
Annealed 1,0
Half-hard 1,0
0,97
0,95
0,82
0,88
0,63
0,54
0,43
0,29
39012061 Replacement blades
79mm
To calculate the working pressure at temperatures other than –200°C to +50°C multiply the
working pressure given in the appropriate table by the factor given in this table.e.g. Safe working
pressure of standard duty half-hard copper tube,
Suitable for providing clean square cuts through 3mm to 19mm plastic tubing.
Cutter is provided with Norgren branding in corporate red colour.
8 mm O/D at +120°C = 157 x 0,88 = 138 bar.
Warning
These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can
exceed those listed under ‘Technical Data’.
Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not
within published specifications, consult Norgren.
Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to
consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or
damage to equipment in the event of such failure.
System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be
adequately provided.
System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products
where applicable.
Our policy is one of continuous research and development. We therefore reserve the right
08/97
N/AL 9.12.001.05
to amend, without notice, the specifications given in this document.
相关型号：
©2020 ICPDF网 联系我们和版权申明