MP5360M [ETC]

High Speed, Low Power RF Modules for the 2.45 GHz ISM Band; 高速,低功耗RF模块为2.45 GHz的ISM频段
MP5360M
型号: MP5360M
厂家: ETC    ETC
描述:

High Speed, Low Power RF Modules for the 2.45 GHz ISM Band
高速,低功耗RF模块为2.45 GHz的ISM频段

ISM频段
文件: 总2页 (文件大小:440K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
nanoPAN 5360, 5361  
High Speed, Low Power RF Modules  
for the 2.45 GHz ISM Band  
Overview  
Main Features  
Both Modules  
nanoNET is a high-performance and low-power network  
for the 2.4 GHz ISM band. It is based on Nanotron’s  
patented Chirp Spread Spectrum (CSS) transmission  
technology and provides a long range of up to 900 meters  
in free space and typically 60 meters indoors (@ 1 Mbps  
and 8 dBm output power). The network is extremely  
robust against disturbances such as noise and mutlipath  
fading. Due to its primarily analog signal processing and  
the robustness of the Chirp signal, nanoNET has an  
extremely low power consumption per successfully  
transmitted bit.  
Operating worldwide in the 2.45 GHz ISM band  
Data rates: 2 Mbps, 1 Mbps, 500 kbps  
Modulation technique: Chirp Spread Spectrum (CSS)  
Chirp bandwidth: 64 MHz effective  
SPI interface to external µc (up to 16 MHz SPI clock)  
Asymmetric 50 antenna port  
Supply voltage: 2.4 V to 3.6 V  
Current consumption: 35 mA (RX),  
78 mA (TX, Maximum output power)  
TX power adjustment in 19 steps  
Operating temperature range: -40° C to +85° C  
4 channel digital I/O  
Small metal housing (20 X 30 X 3.5 mm)  
Two assembly options: pads for soldering and reflow  
For easy product development and fast market entry,  
Nanotron Technologies provides the RF Modules  
nanoPAN 5360 and nanoPAN 5361. They contain the  
complete RF part of an nanoNET network node and  
provide an asymmetrical 50 antenna port. The data rate  
is selectable between 500 kbps, 1 Mbps, and 2 Mbps.  
nanoPAN 5360  
Maximum output power: 6 dBm  
The nanoPAN RF modules are available in two versions.  
The nanoPAN 5360 contains an additional ISM band pass  
filter for an even improved robustness. The nanoPAN  
5361 does not include the band pass filter, but provides a  
higher output power and better receiver sensitivity.  
Receiver sensitivity: -90 dBm (@ BER=10-3 and 1 Mbps)  
ISM band pass filter for maximum robustness  
nanoPAN 5361  
Maximum output power: 8 dBm  
Receiver sensitivity: -92 dBm (@ BER=10-3 and 1 Mbps)  
High range: maximum 900 meters in free space,  
typically 60 m indoors  
Driver software, a Portable Protocol Stack (PPS), an  
Evaluation Kit, and a Development Kit for nanoNET are  
available.  
© Nanotron Technologies GmbH | All rights reserved  
Subject to change without notice.  
NA-05-S-0010-E-1.01  
Applications  
Software  
Active RFID  
Nanotron Technologies provides two software products to  
speed up your product development: a transceiver driver  
and a Portable Protocol Stack (PPS). The driver provides  
all functionality required to access the nanoNET TRX  
transceiver, such as initializing the chip and sending and  
receiving of data. For larger networks, our PPS is the ideal  
solution – it provides advanced services such as  
Industrial Monitoring and Control  
Medical Applications  
Meter and Sensor Reading  
Building Safety  
Multimedia  
broadcasting, frame forwarding, fragmentation, and  
software acknowledgements between end stations. Both  
software products can run even on 8 bit microcontrollers.  
Pin Assignment  
Evaluation and Development Kits  
For an easy start into the world of Chirp transmission  
technology, Nanotron provides an Evaluation Kit. Just  
connect the RF Test Modules to the microcontroller  
boards, connect the boards via RS 232 to your PC or  
laptop, and start the software. The GUI allows you to  
conveniently set the RF parameters, and it demonstrates  
the performance of the air link in real time on your  
computer screen. The nanoNET Development Kit is the  
ideal tool to develop your own applications based on  
Nanotron’s nanoNET TRX Transceiver.  
Ordering Information  
Pin no.  
Pin name  
GND  
Pin no.  
Pin name  
Number  
Description  
1,3,4,6,15-22  
12  
13  
DIIO2  
DIIO1  
24-26,28,30-33  
2
5
MP5360M  
MP5361M  
nanoPAN 5360 RF Module  
nanoPAN 5361 RF Module  
VCC  
SPICLK  
UCVCC  
SPITXD  
SPIRXD  
DIIO4  
14  
23  
27  
29  
34  
35  
PWRUPRESET  
VCC_OUT  
ANT  
TX_RX  
UCIRQ  
UCRESET  
7
8
Further Information:  
9
Nanotron Technologies GmbH  
10  
11  
Alt-Moabit 60 | 10555 Berlin | Germany  
Phone +49 30 399 954 - 0 | Fax +49 30 399 954 - 188  
E-mail sales@nanotron.com | Web www.nanotron.com  
DIIO3  
36  
SPISSN  
© Nanotron Technologies GmbH | All rights reserved  
Subject to change without notice.  
NA-05-S-0010-E-1.01  

相关型号:

MP5361M

High Speed, Low Power RF Modules for the 2.45 GHz ISM Band
ETC

MP5402

TRANSISTOR 5 A, 60 V, 0.4 ohm, 5 CHANNEL, P-CHANNEL, Si, POWER, MOSFET, FET General Purpose Power
TOSHIBA

MP5402M

5A, 36V, Frequency Selectable Step-Down Converter with Smart Dual USB Charging Ports
MPS

MP5402MGR

5A, 36V, Frequency Selectable Step-Down Converter with Smart Dual USB Charging Ports
MPS

MP5402MGR-Z

Switching Regulator,
MPS

MP5403

Configurable 2.7V-6V Mini PMIC with Dual 2.5A/3.5A Buck, One Load Switch, and Input Power Supervisory
MPS

MP5403B

Mini PMIC with Dual 4A/5A Peak Bucks, One 2A Load Switch, and Input Power Supervisory
MPS

MP5403BGQBU

Mini PMIC with Dual 4A/5A Peak Bucks, One 2A Load Switch, and Input Power Supervisory
MPS

MP5403GQBU

Configurable 2.7V-6V Mini PMIC with Dual 2.5A/3.5A Buck, One Load Switch, and Input Power Supervisory
MPS

MP5408M

36V, 6A, Frequency Programmable, Step-Down Converter with Smart, Dual, USB Charging Ports
MPS

MP5408MGU

36V, 6A, Frequency Programmable, Step-Down Converter with Smart, Dual, USB Charging Ports
MPS

MP5410

Low Start-up Voltage Boost Converter with Four SPDT Switches
MPS