LP1017-24 [ETC]
LP1017;
| 型号： | LP1017-24 |
| 厂家： | 
ETC |
| 描述： | LP1017 |
| 文件： | 总1页 (文件大小：41K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LED Driver
Product
Specifications
LP1017-xx Series
Switch-Mode LED Driver
Total Power
17 Watts
ANZ#: Z107f, May 18, 2009
Input Voltages
90 ~ 264 VAC or 100-277VAC
Number of Outputs One
SPECIAL FEATURES
• UL48, Class 2 compliant
• Single output, constant current or constant
voltage design
ELECTRICAL SPECIFICATIONS
Input range
Frequency
90 ~ 264 VAC, Full range or 100~277VAC
47 to 63 Hz
Power Factor
Crest Factor
Inrush current
Input current
Efficiency
> 0.92 at full load, 115VAC
1.5 max.
10.0 Amps maximum at 230VAC, cold start, 25º C
0.3 Amps maximum at 115VAC
82% typical at maximum load
47CFR, Part 2, Part 15 and Cispr PUB, 22 Class B
• IP66 compliant
• Suitable for dry or damp locations
• Designed for outdoor or indoor applications
• Convection cooled in plastic enclosure
• Compact, lightweight
EMI filtering
Maximum power 17W
Current Accuracy ±1% (when applicable)
• Active PFC reduces power consumption
ENVIRONMENTAL
Load regulation
Leakage Current
Hold up time
±3%
300uA typ.
Half cycle minimum at 120 VAC and 80% of rated
load
Operating temperature:
-30 to 60 º C
(De-rating : 1% per º C from 60~70ºC )
Storage temperature:
Humidity (Non-Condensing): 5% to 95%
Protection
Over-voltage, Over current and Short circuit
protection: Auto-recovery
-40 to +85º C
Cooling:
Vibration Frequency:
MTBF:
Convection
5 to 50 Hz
>100,000 Hours at full load and 25ºC
ambient conditions (MIL-217F)
Compliant to 47CFR, Part 2, Part15 and
Cispr PUB, 22 Class B
SAFETY
UL48, Class 2 compliant
CUL48, Class 2 compliant
UL
cUL
CE
EMC :
Constant Voltage Mode
Constant Current Mode
Model Number
Model Number
Output
A (mA)
470
Output
A (mA)
V (DC)
36, ±5%
24, ±5%
12, ±5%
Watts
V (DC)
18~ 36
12~ 24
6 ~ 12
Watts
17
LP1017-36
LP1017-24
LP1017-12
17
17
17
LP1017-36-C0470
LP1017-24-C0700
LP1017-12-C1400
470, ±5%
700, ±5%
1400, ±5%
700
17
17
1400
Note: The output current of Constant Current models are adjustable at factory from 50% ~ 100%.
The minimum load required is 40% for the Constant Voltage versions.
MECHANICAL DRAWING
8.43 [214.0]
0.87 [22.0]
0.16 [4.0]
7.87 [200.0]
0.98 [25.0]
0.49 [12.5]
8.27 [210.0]
R0.08 [R2.0]
0.25 [6.2]
INDUSTRIES CORP. 5625-A S. Arville, Las Vegas, NV 89118 Tel:702-364-9998 Fax: 702-364-1562 www.magtechind.com Anz107f
相关型号：
©2020 ICPDF网 联系我们和版权申明