ITRAX03 [ETC]
OEM GPS Receiver Module; OEM GPS接收模块型号: | ITRAX03 |
厂家: | ETC |
描述: | OEM GPS Receiver Module |
文件: | 总2页 (文件大小:195K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
s mart
positioning
iTRAX0 3 Key Fea t ur es :
• Tiny PCB form factor – 23mm x 23mm x 2.7mm
• Ultra-low power consumption – <95mW @ 2.7V
• Very High Sensitivity –152dBm (Tracking)
• Basic A-GPS support
• iTALK and NMEA0183 protocols
• Kalman Navigation
• Supports remote software updates
• Extensive support for external sensors
• Versatile interface ports
iTrax0 3
• Accurate 1PPS timing output
OEM GPS Receiver Module
• iTRAX03/16 – 16MBit Flash Memory
iSUITE03 SDK Software Development Kits
Datalogger, up to 70.000 datapoints
• iTRAX03/8 – 8MBit Flash Memory
NMEA Engine
• Very High Sensitivity
• Ultra Low Power Consumption
• Market Leading Programmability
Fastrax iTrax03 OEM GPS receiver modules enable the
implementation of full-fledged positioning features into
appliances faster and with less effort than ever before.
dedicated hardware search engine ensures fast TTFF thus
no back-up battery is required. These benefits can easily
be converted to smaller component costs and smaller
design – crucial parameters for many projects.
Offering industry-leading benefits in performance, size,
power consumption, programmability and total cost of
product, the iTrax03 receivers are ideally suited for both
industrial tracking and navigation systems and battery-
operated consumer products like sports accessories,
handheld computers, asset tracking devices, vehicle
navigation devices and mobile phones.
iTRAX0 3 / 1 6 – Vers atile
Programmability
The iTrax03/16 features 16 MBit Flash memory which allows
versatile programmability with iSuite03 SDK. It also allows
permanent operation parameter changes via NMEA or iTalk
and data logging as a standard feature. Application costs
are reduced significantly when no external processor is
required and the iTrax03 is used as a host controller. With
fewer components, cost and application size are reduced.
Market Leading Sys t em Performance
Ultra-low, user configurable power management makes
iTrax03 one of the lowest power consuming, complete 12-
channel OEM GPS receivers on the market. Nevertheless,
there are no compromises in performance. The iTrax03
receivers have a navigation sensitivity as low as –152dBm
making them applicable even for extremely demanding
applications and environments. The iTrax03 includes a full-
fledged MMC-card interface which enables integrated PDA
applications i.e. maps for navigation. A-GPS can be used
to further improve TTFF and acquisition sensitivity.
iTRAX0 3 / 8 – cost efficient performance
In applications where the industry standard NMEA0183
protocol is sufficient and programmability is unnecessary,
the iTrax03/8 with 8MBit Flash memory, is a cost efficient
and high performance alternative.
Quick Start with Easy-To-Deploy Solution
The addition of an antenna and power supply is all that is
required to make the iTRAX03 operational. The Fastrax
Engineering Services team can provide antenna design
application notes to aid in further refinement of the antenna
design for specific applications.
Cutting component cos ts
Space and costs are reduced due to the cutting-edge
technology architecture in the iTrax03 receivers. The surface
mount SMD design eliminates need for expensive and labour
intensive system and RF connectors. Very few additional
components are required. Utilizing the iTrax03
programmability cost of a host CPU can be saved. The
iTrax0 3
OEM GPS Receiver Module
Specifications
General:
L1 frequency, C/A code (SPS)
12 independent tracking channels
Separate search & acquisition engine
1 fix/s or user configurable
I/O Ports:
Dual Asynchronous data ports
22-pin GPIO (Shared Functionality)
2 x SPI-Interface
Update rate:
Accuracy:
Dual Pulse Measurement inputs
1PPS Output
Position:
Velocity:
Time:
3m (CEP), 6m 2DRMS
0.2 m/s (50%)
2 x PulseMeasurement Timers
2 x Capture Timers
20ns RMS (static mode)
Reacquisition:
TTFF:
100ms typical (signal reacquisition)
Out of the box start: 40 s typical
2 x Clock inputs
MMC (Master) connection
Cold Start:
Hot Start:
Quick Start:
Acceleration:
Jerk:
35 s
8 s
Protocol:
NMEA-0183 V3.0
Proprietary iTALK binary protocol
Proprietary, 32MIPS integrated 16/32-bit DSP-core
RISC-like programming under Pre-emptive
Real Time Operating System Control (VSDSP RTOS)
3 s
Processor:
Dynamics:
4 G
4 m/s3
Sensitivity:
-152dBm (tracking)
Flash Memory:
iTRAX03/16:
iTRAX03/8:
16MBits Flash
8MBits Flash
Operating Voltage:
Operating Temp:
Antenna Supply:
Antenna:
2.7V…3.3V (linearly regulated)
-40C…+85C
Dimensions:
Weight:
23 mm x 23 mm x 2.7 mm (Including RF shield)
3 g
Same as board supply
External, passive or active
95mW @ 2.7V (Continuous Mode)
20mW @ 2.7V (Idle Mode)
60µW @ 2.7V (Sleep Mode)
(Active antenna power not included)
Connection to:
Software Features:
37 SMD connection pods under the module
Kalman Navigation
Power Drain:
Reprogramming on the fly
DGPS Supporting RTCM Standard
Advanced Multipath Mitigation
Advanced Cross Correlation Mitigation
A-GPS Support
WAAS / EGNOS Support
Other Fas trax GPS products
The iTrax0 3 Fam ily includes iFix0 3 OEM GPS Mea s ur em ent Fr ont
End, iSuite0 3 Standard SDK, iSuite0 3 Profes s ional SDK, iTrax0 3
Evaluation Kit and iTrax0 3 Development Board. The iTrax03 Evaluation
kit includes an universal power supply, two serial cables, an active antenna,
a user's manual and a CD with documentation and the GPS WorkBench
PC software. The iTrax03 Development Board allows
customers to develop custom demanding applications utilizing
the versatile programmability and extensive connections
available on the iTrax03 products.
iFix0 3
iTrax0 3 Evaluation Kit
iTr a x0 2 fa m ily of products includes iTr a x0 2 / 4 , iTr a x0 4 / 8 ,
uTracker0 2 , uPatch0 2 and iTrax0 2 Evaluation Kit.
iTrax0 2
For programming the iTrax03/16 Fastrax offers iSuite03 Standard SDK
(software development kit). In addition to the software the iSuite03 Standard
SDK includes three days of hands on training and e-mail support during
development. The iSuite03 Professional SDK gives programmers access to
extensive source code libraries enabling development of application using
A-GPS, WAAS / EGNOS, RTK, external sensors, MMC interface, LCD drivers
and other communication drivers in addition to Production Support Toolkit.
iSuite0 3 Standard SDK
iSuite0 3 Profes s ional SDK
Separate product descriptions can be found at www.fas trax.fi
Fas trax Ltd • Valimotie 7 • FIN-0 1 5 1 0 Vantaa • FINLAND
相关型号:
ITS-P-09010NW
1.2 mm Pitch, Low Profile âSwing Lockâ Wire to Board Connector for Power Supply
ETC
©2020 ICPDF网 联系我们和版权申明