IMR7P432075 [ETC]
SWITCH PUSHBUTTON SPDT 3A 28V;
| 型号： | IMR7P432075 |
| 厂家： | 
ETC |
| 描述： | SWITCH PUSHBUTTON SPDT 3A 28V 光电二极管 |
| 文件： | 总5页 (文件大小：1736K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
IM series
Sealed snap-action pushbutton switches •
bushing Ø 12 mm • momentary
DISTINCTIVE FEATURES
Snap-action : tactile feedback with audible click
High current/voltage rating
Sealed to IP67
Flat round actuator for optional marking
NO+NC
ENVIRONMENTAL SPECIFICATIONS
• Front panel sealing : IP67 according to IEC 60529
• Shock resistance : 50 g - 11 ms according to IEC 68-2-27
• Salt spray : IEC 512-6, test 11f
• Operating temperature : -40 °C to +85 °C (-40 °F to +185 °F)
• Storage temperature : -40 °C to +85 °C (-40 °F to +185 °F)
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load : 3 A 28 VDC
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 1 GΩ min. at 500 VDC
• Dielectric strength : 500 Vrms between terminals
• Electrical life at full load : 25,000 cycles
GENERAL SPECIFICATIONS
• Panel thickness : 1.5 mm (.059) to 10 mm (.394)
• Total travel : 1.7 mm (.067) ± 0.3 mm
• Low level or mechanical life : 1,000,000 cycles
• Torque (applied to nut) : 1 Nm max. with metal nut U166
1.5 Nm max. with plastic nut U4248
MATERIALS
• Case : polyamide 4/6
• Actuator : polyamide 6/6
• Bushing/bezel : polyamide 6/6
• Contacts : silver, gold plated
• Terminal seal : epoxy
The company reserves the right to change specifications without notice.
1
IM series
Sealed snap-action pushbutton switches •
bushing Ø 12 mm • momentary
MOUNTING STANDARD BEZEL
(CONTINUED)
AGENCY APPROVAL
1 A 125 VAC/250 VAC
File E83438
BACK OF PANEL SPACE REQUIREMENT
Availability : consult factory for details of approved models.
Marking : to order switches marked UL, complete
appropriate box of ordering format.
TERMINALS
MOUNTING REDUCED BEZEL
1.00
1.20
(.039)
(.047)
PANEL CUT-OUT
2.80
(.110)
12.90
(.507)
Straight P
Quick-connect Z
2
Ø13.60
(.535DIA)
ELECTRICAL FUNCTIONS
Ø13.50
(.531DIA)
Ø15.60
(.614DIA)
- Flat seal
MATRIX MOUNTING
Ø15.00
(.590DIA)
Function 7 (NC+NO)
17.50
(.689)
17.50
(.689)
1
2
3
MOUNTING STANDARD BEZEL
PANEL CUT-OUT
- O-ring
12.90
(.507)
BACK OF PANEL SPACE REQUIREMENT
1
Ø13.60
(.535DIA)
Ø13.50
(.531DIA)
- Flat seal
MATRIX MOUNTING
20.00
(.787)
20.00
(.787)
2
IM series
Sealed snap-action pushbutton switches •
bushing Ø 12 mm • momentary
BUILD YOUR PART NUMBER
BASIC PART NUMBER
IM
ELECTRICAL FUNCTION
SERIES
ACTUATOR SHAPES
TERMINALS
CONTACTS
Silver, gold
NC + NO
Round, curved
Straight PC
7
R
P
Z
4
plated (standard)
Round, flat
Quick-connect
P
Actuator marking
available on round flat
models (symbol 10 mm
max.). On request.
OPTIONS
BEZEL OPTIONS
ACTUATOR COLORS
BUSHING & BEZEL
ACTUATOR OPTION
APPROVAL
Consult factory for
detail of approved
models.
Black
Blue
Standard bezel
Std actuator
2
1
Blank
Blank
UL
Other : on request
Dia. 15 (.590)
Dark blue
High actuator
B
104
reduced bezel,
075
front mounting
Black
2
Dia. 15 (.590)
Green
3
reduced
234
bezel, std mounting
Grey
4
Yellow
5
Red
6
White
7
Orange
9
ABOUT THIS SERIES
On the following pages, you will find successively basic part numbers of switches and options in the same order as in above chart.
Notice : please note that not all combinations of above numbers are available. Refer to the following pages for further information.
A sealing boot is available to protect the switches against frost and sand (P/N U5125). See "Sealing Boots" section of website.
Mounting accessories : Standard hardware supplied : 1 flat seal (standard bezel) or 1 O-ring (reduced bezel) and 1 metal hex nut 14
mm (.551) across flats. Hex nut part number U166. Plastic nut 17 mm (.669) across flats, thickness 4 mm (.157) available on request. Part
number U4248.
3
IM series
Sealed snap-action pushbutton switches •
bushing Ø 12 mm • momentary
Common terminal identified by a horizontal dash
FLAT
STANDARD BEZEL
Ø12.00
STRAIGHT PC TERMINALS
(.472DIA)
Ø17.50
(.688DIA)
Curved actuator
10.80
Ø12.00x0.75SI
(.425)
NC+NO
IMR7P4
(.472DIAx0.75IS)
EPOXY
Flat actuator
NC+NO
IMP7P4
0.50
1.00
(.020)
(.039)
2.80
3.35
(.110)
(.132)
3.35
(.132)
FLAT
STANDARD BEZEL
Ø12.00
(.472DIA)
QUICK-CONNECT TERMINALS
Ø17.50
(.688DIA)
10.80
Curved actuator
Ø12.00x0.75SI
(.425)
(.472DIAx0.75IS)
NC+NO
NC+NO
IMR7Z4
EPOXY
Flat actuator
IMP7Z4
0.50
(.020)
1.20
(.047)
3.35
2.80
(.132)
3.35
(.110)
(.132)
ACTUATOR COLORS
BASIC P/N
1
B
2
3
4
5
6
7
9
Blue
Dark blue
Black
Green
Grey
Yellow
Red
White
Orange
BUSHING AND BEZEL
BASIC P/N
2
Black (standard)
Other : on request
4
IM series
Sealed snap-action pushbutton switches •
bushing Ø 12 mm • momentary
BEZEL OPTIONS
BASIC P/N
Blank Standard bezel
Ø15.00
(.590DIA)
Ø15.00
(.590DIA)
075
Dia. 15 (.590) reduced bezel, mounting of the
switch from the front into a threaded panel cut-out
Dia. 15 (.590) reduced bezel, standard mounting
234
075
234
ACTUATOR OPTION
BASIC P/N
Blank Standard actuator
104 High actuator
Ø12.00
(.472DIA)
Ø12.00
(.472DIA)
104 IMR
104 IMP
AGENCY APPROVAL
BASIC P/N
UL
Availability : consult factory for details of approved models.
Marking : to order switches marked UL, complete appropriate box of ordering format.
5
相关型号：
©2020 ICPDF网 联系我们和版权申明