HS-1201 [ETC]
CRYSTAL CLOCK OSCILLATORS; 晶体时钟振荡器
| 型号： | HS-1201 |
| 厂家： | 
ETC |
| 描述： | CRYSTAL CLOCK OSCILLATORS |
| 文件： | 总2页 (文件大小：361K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Data Sheet 8706A
CRYSTAL CLOCK OSCILLATORS
Rev. M
TTL Compatible Enable/Disable
HS-1200/1210 Series
Description
The HS-1200/1210 Series of quartz crystal oscillators provide enable/disable 3-state TTL compatible
signals for bus connected systems. Supplying Pin 1 of the HS-1200 units with a logic “0" enables the output
on Pin 8. Alternately, supplying pin 1 of the HS-1210 units with a logic “1" enables its Pin 8 output. In the
disabled mode, Pin 8 presents a high impedance to the load. All units are resistance welded in an all metal
package, offering RFI shielding, and are designed to survive standard wave soldering operations without
damage. Insulated standoffs to enhance board cleaning are standard.
Features
• Wide frequency range– 0.5MHz to 36MHz
• User specified tolerance available
• Low Jitter
• High Q Crystal actively tuned oscillator circuit
• Will withstand vapor phase temperatures of 253°C • Power supply decoupling internal
for 4 minutes maximum
• Space-saving alternative to discrete component
oscillators
• No internal PLL avoids cascading PLL problems
• Low power consumption
• Gold plated leads - Solder dipped leads available
upon request
• High shock resistance, to 3000g
• All metal, resistance weld, hermetically sealed
package
Electrical Connection
Pin
Connection
1
7
8
Enable Input
Grd & Case
Output
14 VCC
Dimensions are in inches and (MM)
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881
Email: nelsales@nelfc.com www.nelfc.com
Data Sheet 8706A
CRYSTAL CLOCK OSCILLATORS
Rev. M
HS-1200/-1210 Series Continued
TTL Compatible - Enable/Disable
Operating Conditions and Output Characteristics
Electrical Characteristics
Parameter
Symbol
-----
Conditions
-----
Min
Typical
Max
Frequency
0.5MHz
40/60%
-----
-----
-----
-----
-----
-----
-----
36.0MHz
60/40%
0.4V
Duty Cycle
-----
@ VCC/2
Logic 0
VOL
@ 16mA
@ 0.4mA
@ 0.4 to 2.4V
-----
Logic 1
VOH
2.4V
-----
-----
Rise & Fall Time
Tpz
tr,tf
5 ns
-----
-----
25 ns
Enable/Disable
Logic High Voltage
Enable/Disable
Logic Low Voltage
Jitter, RMS(2)
Frequency Stability (1)
1K internal pullup
to VCC
-----
2.4V
2.0V
-----
-----
-----
dF/F
-5.5mA IIL
-----
0.2V
-----
-----
0.4V
-----
-----
8 psec
+100ppm
Overall conditions including:
voltage, calibration, temp.,
10 yr aging, shock, vibration
-100ppm
General Characteristics
Parameter
Symbol
Conditions
Min
Typical
5.0V
-----
Max
Supply Voltage
Supply Current
Output current
Operating temperature
Storage temperature
Power Dissipation
Lead temperature
Load
VCC
ICC
IO
-----
4.5V
0.0 mA
0.0 mA
0°C
5.5V
No Load
55 mA
±16.0 mA
70°C
-----
-----
TA
TS
PD
TL
-----
-----
-----
-55°C
-----
-----
125°C
303 mW
300°C
10TTL gate
2 ms
-----
-----
Soldering, 10 sec.
-----
-----
-----
----
tS
-----
-----
Start-up time
<20MHz
-----
-----
20MHz or greater
-----
-----
10 ms
Environmental and Mechanical Characteristics
Mechanical Shock
Thermal Shock
Vibration
Per MIL-STD-202, Method 213, Condition E
Per MIL-STD-833, Method 1011, Condition A
0.060" double amplitude 10 Hz to 55 Hz, 35g’s 55Hz to 2000 Hz
300°C for 10 seconds
Soldering Condition
Hermetic Seal
Leak rate less than 1 x 10 -8 atm.cc/sec of helium
Footnotes:
1) Standard frequency stability (±20,±25,±50ppm & others available)
2) Jitter performance is frequency dependent. Please contact factory for full characterization.
Test Load:
Creating a Part Number
HS - X120X - FREQ
Package Code
Tolerance/Performance
0 ±100ppm 0-70°C
1 ±50ppm 0-70°C
HS Leaded 4 pin (14 pin)
SM Leaded 4 pin (14 pin) SMD
Gull Wing
7 ±25ppm 0-70°C
Input Voltage
9 Customer Specific
A ±20ppm 0-70°C
Code Specification
A
3.3V
5V
B ±50ppm -40 to +85°C
C ±100ppm -40 to +85°C
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881
Email: nelsales@nelfc.com www.nelfc.com
©2020 ICPDF网 联系我们和版权申明