HR30-6R-6P-T01 [ETC]
Miniature Waterproof Plastic Connectors;型号: | HR30-6R-6P-T01 |
厂家: | ETC |
描述: | Miniature Waterproof Plastic Connectors |
文件: | 总12页 (文件大小:438K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
NEW
Miniature Waterproof Plastic Connectors
HR30 Series
Mated dimensions
32.3
3 and 6 pos.
42.1
10 and 12 pos.
ꢀFeatures
Lock/release operation
1. Small size
Short in length when fully terminated and mated.
Push-pull- single action lock
2. Water and dust protected
IP67 protection rating: Complete protection against dust
penetration and against water penetration when
submerged 1 meter deep for half hour. Mated with
corresponding connector or protective cap.
3. Simple pull lock release
Built-in lock/release mechanism securely locks mated
connectors while allowing quick disconnection by simply
pulling on the plug’s release collar. Molded-in grooves
prevent hand slippage when pulled.
Alignment marks
The round configuration of the collar allows easy side-by-
side panel mounting and will not snag on objects when
the cable is pulled-out.
Push-pull locking collar
4. Light weight, corrosion resistant
Glass reinforced thermoplastic compounds and non-
corrosive components are used in all assemblies.
5. Contact protection and self- alignment
Multiple polarizing keys protect the contacts from miss-
alignment or attempted insertion of the wrong connector,
while assuring correct mating between the corresponding
connectors.
6. Visual alignment indicators
Permanent alignment indicators in a contrasting color on
all connectors aid in correct alignment and engagement.
Polarized interface
7. Built-in cable strain relief
ꢀApplications
Test and measuring equipment, portable devices,
instrumentation, industrial devices, recreational equipment,
I/O applications and other applications requiring use of
lightweight, corrosion resistant quick mate/ release cable
connections.
2006.5
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀProduct Specifications
5A (3 pos.)
2A (6,10,12 pos.)
Current rating
Operation Temperature Range
StorageTemperature Range
+
-25ç to 85ç
Ratings
100V AC,140V DC(3,6 pos.)
30V AC,42V DC(10,12 pos.)
Voltage rating
+
-25ç to 85ç
Characteristic
Specification
Conditions
5m ohms max. (3 pos.)
15m ohms max. (Solder type: 6, 10, and 12 pos.)
30m ohms max. (Through hole type: 6 and 12 pos.)
1.Contact resistance
1A DC
1000M ohms min.
2.Insulation resistance
3.Withstanding voltage
100 V DC
No flashover or insulation breakdown
300 V AC / one minute
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
1 cycle= 5min, 10 cycles in each of the 3 directions.
4.Vibration
No electrical discontinuity of 10 µs or more
Contact resistance 10m ohms min.(3 pos.)
Contact resistance 30m ohms min. (Solder type: 6, 10, and 12 pos.)
Contact resistance 100m ohms min. (Through hole type: 6 and 12 pos.)
5.Durability (mating/un-mating)
6.Temperature cycle
7.Humidity resistance
1000 cycles
ꢀ
ꢀ
(-55ç: 30 minutes Room temperature: 10 to 15 minutes +85ç: 30
Insulation resistance 100 M ohms min.
ꢀ
minutes Room temperature: 10 to 15 minutes) for 5 cycles
Insulation resistance
10M ohms min. (when humidity high)
100M ohms min. (when dry)
96 hours at temperature of 40ohmsC and humidity of 90% to 95%
8.Waterproof performance
9.Dust protection
While mated with corresponding or protective cap submerged at
depth of 1m for half hour.
No penetration inside.
ꢀMaterial
Assembly
Component
Insulator
Material
Finish
Remarks
UL94V-0
UL94V-0
----------
PPS
Black
PBT
Black
Polyacetal
Natural
Plug
Gasket
Silicone rubber, chloroprene rubber
Brass, phosphor bronze
Stainless steel
Red/Black
----------
Contacts
Spring
Gold plated
----------
----------
----------
Insulator
Gasket
PPS
Black
UL94V-0
----------
Chloroprene rubber
Brass, phosphor bronze
Zinc alloy
Black
Receptacles
Contacts
Hexagonal nut
Washer
Gold plated
Chromate
Nickel plated
----------
----------
Phosphor bronze
----------
Crimp contact
(male/female)
Contacts
Phosphor bronze
Selective gold plated
----------
ꢀOrdering information
(
)
* *
HR 3 0 - 6 P A - 6 S C
1
2
3
4
5
6
7
8
Number of Contacts : 3, 6, 10 and 12
1
2
3
5
6
Series name
Shell size
Connector type : P : Plug
Connector type : R : Receptacle
Connector type : J : Jack
Variation
: HR30
Outside diameter/plug mating side
:
Contact type
S
P
: Female contact
: Male contact
Contact wiring type
7
Blank: Solder
C
D
: Crimping
: Through hole
4
Blank : Standard
A
: Fine wire
Plating
(71) : Gold plated (Except caps)
8
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀPlugs
ꢀSolder Type
HR30-6P-6S (Shown)
A(Fully tightened)
Applicable
cable diameter
1
6
5
2
4
3
Part Number
CL No.
A
B
Solder pot inner diameter Applicable cable diameter range
1.1 mm
Weight
RoHS
YES
(
)
)
)
HR30-6P-3S 71
130-0004-1-71
130-0010-4-71
130-0009-5-71
130-0021-0-71
130-0019-9-71
130-0020-8-71
130-0027-7-71
130-0026-4-71
29.8
30.3
29.8
30.3
4.2 to 5
(
HR30-6P-6S 71
0.8 mm
(
HR30-6P-6P 71
4g
12.6
(
)
)
)
1.1 mm
HR30-6PA-3S 71
(
3.5 to 4.3
HR30-6PA-6S 71
0.8 mm
(
HR30-6PA-6P 71
(
)
HR30-7P-12S 71
6.7g
6.2 to 7
39.8
15.5
0.6 mm
(
)
HR30-8P-12P 71
ꢀCrimp Type
HR30-7P-12SC (Shown)
Applicable
A(Fully tightened)
cable diameter
Shown with terminated and installed contacts.
Part Number
CL No.
A
Crimp contact
Applicable cable diameter range
Weight
6g
RoHS
(
)
)
)
HR30-7P-10SC 71
130-0013-2-71
130-0014-5-71
130-0015-8-71
HR30-SC-211
6.2 to 7
YES
(
HR30-7P-12SC 71
39.8
(
HR30-8P-12PC 71
HR30-PC-211
Note: Crimp contacts are not included. Please order applicable contacts separately.
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀReceptacles
ꢀSolder Type
A
HR30-6R-6P (Shown)
Gasket
B
1
6
2
5
4
3
E(Thread)
F(Hex nut)
Lock washer
Part Number
CL No.
Solder pot inner diameter Weight RoHS
A
B
C
D
E
F
130-1003-4-71
130-1009-0-71
130-1008-8-71
130-1016-6-71
130-1018-1-71
(
)
)
)
1.1mm
HR30-6R-3P 71
16
∞
8.3
12
8.9
M8 0.75
10
2g
(
HR30-6R-6P 71
0.8mm
18.4
18.6
YES
(
HR30-6R-6S 71
(
)
)
HR30-7R-12P 71
∞
9.3
15
11.5
M11 1
13
3.4g
0.6mm
(
HR30-8R-12S 71
ꢀCrimp Type
15.5
HR30-7R-12PC (Shown)
9.3
Gasket
M11X1(Thread)
SShhoowwnnwwiitthhtteerrmmiinnaatteeddaannddiinnssttaallleeddccoonnttaaccttss..
13(Hex nut)
Lock washer
Part Number
CL No.
Crimp contact
HR30-PC-211
Weight
3g
RoHS
(
)
)
)
HR30-7R-10PC 71
130-1012-5-71
130-1013-8-71
130-1014-0-71
YES
(
HR30-7R-12PC 71
(
HR30-8R-12SC 71
HR30-SC-211
ꢀThrough hole Type
A
HR30-8R-12SD (Shown)
B
2
Through hole post
(0.2∞0.5)
E
F(Hex nut)
Lock washer
Gasket
Part Number
CL No.
Weight
RoHS
A
B
C
D
E
F
130-1020-3-71
130-1021-6-71
130-1017-9-71
130-1019-4-71
14.9
15.2
(
)
)
HR30-6R-6PD 71
∞
8.3
12
8.9
M8 0.75
10
13
2g
(
HR30-6R-6SD 71
YES
(
)
)
HR30-7R-12PD 71
∞
16
9.3
15
11.5
M11 1
3.4g
(
HR30-8R-12SD 71
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀJacks
ꢀSolder Type
HR30-6J-6P (Shown)
Applicable
cable diameter
B(Fully tightened)
1
6
2
5
3
4
Part Number
CL No.
A
B
Applicable cable diameter range Solder pot inner diameter
Weight
3g
RoHS
(
)
HR30-6J-6P 71
130-2009-6-71
130-2018-7-71
130-2020-9-71
130-2019-0-71
4.2 to 5
12
28.9
0.8 mm
(
)
HR30-6JA-6P 71
3.5 to 4.3
YES
5.7g
5.9g
(
)
HR30-7J-12P 71
15
37.3
0.6 mm
6.2 to 7
(
)
HR30-8J-12S 71
ꢀCrimp Type
HR30-7J-12PC (Shown)
37.3(Fully tightened)
Applicable
cable diameter
Shown with terminated and installed contacts.
Part Number
CL No.
Crimp contact
HR30-PC-211
Applicable cable diameter range
Weight
5g
RoHS
YES
(
)
)
)
HR30-7J-10PC 71
130-2015-9-71
130-2017-4-71
130-2016-1-71
6.2 to 7
(
HR30-7J-12PC 71
(
HR30-8J-12SC 71
HR30-SC-211
Note: Crimp contacts are not included. Please order applicable contacts separately.
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀCaps
ꢀFor Plugs
HR30-6P-C
Ø
E
Part Number
CL No.
Applicable connector
A
B
C
D
4
E
Weight
1g
RoHS
YES
(
)
)
)
HR30-6P-3S 71
(
HR30-6P-6S 71
(
HR30-6P-6P 71
13
8.4
8.9
8.8
(
)
HR30-6P-C 71
130-3000-7-71
(
)
)
)
HR30-6PA-3S 71
(
HR30-6PA-6S 71
(
HR30-6PA-6P 71
(
)
)
)
HR30-7P-10SC 71
(
)
)
HR30-7P-C 71
130-3004-8-71
130-3003-5-71
(
)
HR30-7P-12S 71
16
10.4
10.5
6
11.4
(
2g
HR30-7P-12SC 71
(
)
HR30-8P-12P 71
(
HR30-8P-C 71
(
HR30-8P-12PC 71
ꢀFor Receptacle
HR30-6R-C
Ø
E
Ø
D
Part Number
CL No.
Applicable connector
A
B
C
D
E
Weight
RoHS
(
)
)
HR30-6R-3P 71
(
HR30-6R-6P 71
(
)
)
HR30-6R-C 71
130-3001-0-71
(
)
)
12.6
11.8
7.5
12.1
9.1
HR30-6R-6PD 71
(
)
HR30-6R-6S 71
(
HR30-6R-6SD 71
(
)
HR30-7R-10PC 71
1g
YES
(
)
HR30-7R-12P 71
(
)
)
HR30-7R-12PC 71
(
HR30-7R-C 71
130-3002-2-71
(
15.5
14.8
8.5
15
12.1
HR30-7R-12PD 71
(
)
HR30-8R-12S 71
(
)
)
HR30-8R-12SC 71
(
HR30-8R-12SD 71
Note : When using these caps, do not use the gasket that is normally supplied with the receptacle. The “B” diameter end of the
receptacle cap will serve as the gasket.
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀCrimp Contacts
Male contact
Female contact
1.2
1.2
A
A
A
A
11
A-A cross-section
11
A-A cross-section
Part Number
HR30-PC-111 130-0022-3
HR30-PC-211 130-0016-0 10,000pcs/reel 0.03g/1per pin
CL No.
Packaging type
Weight
RoHS
YES
Part Number
CL No.
Packaging type
100pcs/bag
Weight
RoHS
YES
100pcs/bag 0.03g/1per pin
HR30-SC-111 130-0023-6
0.03g/1 pin
0.03g/1 pin
HR30-SC-211 130-0017-3 10,000pcs/reel
Note : Use wire size AWG 26 to 30 with a jacket diameter of 1 mm max.
BConnecting Combinations
Plugs
HR30- P-
Receptacles
HR30- R-
*
**
(
)
71
*
**
(
)
71
Jacks
HR30- J-
*
**
(
)
71
Caps for Receptacle
HR30- R-C 71
Caps for Plug
*
(
)
*
(
)
HR30- P-C 71
Panel
(Shown for reference only.)
Cable
(Shown for reference only.)
Cap
Cap
Note 1 : When selecting connectors, take into account the shell size, contact count and gender of the contacts.
Note 2 : When using the protective caps for the receptacles, do not use the gaskets normally supplied with the receptacle. Protective caps must
be fully inserted to assure specified IP67 water and dust protection.
7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BApplicable Fixtures
ꢀSolder termination fixture
Part Number
CL No.
Applicable Connectors
(
)
HR30-6P-3S 71
HR30-6P-3S-T01
150-0220-1
(
)
)
)
HR30-6PA-3S 71
(
)
HR30-6P-6S 71
HR30-6P-6S-T01
150-0214-9
(
HR30-6PA-6S 71
(
)
HR30-6P-6P 71
HR30-6P-6P-T01
150-0221-4
150-0228-3
150-0223-0
(
HR30-6PA-6P 71
(
HR30-7P-10SC 71
)
)
)
HR30-7P-10SC-T01
HR30-7P-12SC-T01
(
)
HR30-7P-12S 71
(
HR30-7P-12SC 71
(
)
HR30-8P-12P 71
HR30-8P-12PC-T01
HR30-6R-3P-T01
150-0227-0
150-0225-5
(
HR30-8P-12PC 71
(
)
HR30-6R-3P 71
(
)
HR30-6R-6P 71
( )
HR30-6J-6P 71
HR30-6R-6P-T01
150-0218-0
(
)
HR30-6JA-6P 71
( )
HR30-6R-6S 71
HR30-6R-6S-T01
150-0222-7
150-0231-8
150-0230-5
150-0226-8
( )
HR30-7J-10PC 71
HR30-7J-10PC-T01
HR30-7J-12PC-T01
HR30-8J-12SC-T01
(
)
HR30-7J-12PC 71
(
)
HR30-8J-12SC 71
Note : The back shell tightening collar is used to tighten the back shell to the specified torque.
Refer to assembly procedures.
ꢀTightening collar for back shell
Part Number
HR30-6P-T02
HR30-8P-T02
CL No.
Applicable Connectors
3 and 6 pos.
150-0216-4
150-0224-2
10 and 12 pos.
Note: The back shell tightening collar is used to tighten the back shell to specified torque.
Refer to assembly procedures.
Solder termination fixture
Back shell tightening collar
HR30-6P-6S-T01
HR30-6R-6P-T01
HR30-6P-T02
8
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀApplicable Tools
Type
Description
Manual crimping tool
Automatic crimping machine
Applicator
Part Number
HT-102/HR30-1
CM-105
CL No.
Applicable contact
HR30-SC-111
HR30-PC-111
----------
Applicable wire
Manual
150-0229-6
901-0005-4
901-2015-9
AWG#26~#30
----------
Automatic
HR30-SC-211
HR30-PC-211
HR30-SC-111
HR30-SC-211
HR30-PC-111
HR30-PC-211
AP105-HR30-1
AWG#26~#30
----------
Extraction tool
HR30-TP
150-0219-2
----------
Manual contact crimping tool HT-102/HR30-1
Automatic contact crimping machine CM-105
Contact extraction tool HR30-TP
BReceptacle, Board Mounting Through Hole Pattern
2.16
1.44
2.16
1.44
2.16
1.44
2.16
1.44
0.9
0.9
0.9
0.9
6-Ø0.65
6-Ø0.65
12-Ø0.65
12-Ø0.65
6
1
3
1
1
3
1
5
2
6
7
4
4
7
5
4
2
10
12
8
8
10
12
3
4
3
11
11
0.9
0.9
0.72
0.72
0.72
0.72
1.81.8
1.52 1.52
6R-6PD
6R-6SD
7R-12PD
8R-12SD
Notes 1.The receptacle through hole configuration depicts a view from the mating side of the connector.
2.The recommended board maximum thickness :1.2 mm.
3.Tolerance of +0.03 mm is recommended for the plated through hole location.
Tolerance of +0.02 mm is recommended for the plated through hole diameter.
BContact Position Arrangement
BPanel Cutout
Alignment mark
A+0.05
Alignment mark
0
1
3
6
4
5
1
1
3
6
3
2
5
4
2
2
(
)
(
)
(
)
HR30-6P-3S 71
HR30-6P-6S 71
HR30-6P-6P 71
3
2
9
1
8
1
8
2
9
3
3
2
9
1
8
7
6
5
4
4
5
6
7
7
6
5
4
10
10
A
B
C
D
Panel Thishness
0.7~2
10
11
12
11 12
3,6 pos
1.25
6.45
9.25
8.05
11.05
3.95
5.45
(
)
(
)
(
)
HR30-7P-10SC 71
HR30-7P-12SC 71
HR30-8P-12PC 71
10,12 pos 1.35
0.7~3
Notes 1.The contact configuration depicts a view from the wiring side.
2. Mounting to the panel is accomplished by tightening the hexagonal nut from the rear side of the panel.
9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BAssembly Procedures
Plug Assembly Sequence
Push/pull locking collar
Seal bushing
Insulator/contact assembly
Back shell
Spring
Strain relief
1
A
B
Cable
A
B
2 mm
Solder type : 3 and 6 pos.
Solder type : 12 pos.
5.5 mm max.
10 mm max.
15 to 20 mm
2 mm
-0
-0.5
2
mm
Crimp type : 10 and 12 pos.
Thread the back shell, strain relief, seal bushing, spring and push/pull locking collar over the cable as shown above.
Block end face
Insulator/contact assembly
Solder termination fixture
2
Solder type
1. Pre-solder the exposed cable conductors (dia. A). The diameter of the pre-soldered conductors should not exceed 0.7
mm for 6 contact plug and 1.0 mm for 3 contact plug.
2. Insert the insulator body over the applicable solder termination fixture.
3. Insert the pre-soldered conductors in the contact soldering pot and solder them in place.
Soldering iron temperature should be 280 10ç applied for 3-4 second.
Crimp type
1. Crimp the applicable contact to the stripped conductor. Use correct crimp tools. Verify the dimensions and crimp
configuration.
2. Insert the contact into the appropriate opening in the insulator body.
3. Verify fully seated position by applying a slight pull force on the conductor. The contact should remain in place.
Re-insert if not seated.
10
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Cable
Back shell
Cable
Push/pull
locking collar
Guide keys
Tightening collar for back shell
A
Plug insulator body
Solder termination fixture
Cable
View A (2:1)
3
Groove - sealing bushing
Front edge of cable jacket
Figure B
Figure C
Back shell tightening collar size Torque
Connector
.
3 and 6 Pos.
16 mm
18 mm
0.5N m
.
10 and 12 Pos.
0.5N m
1. To prevent accidental loosening of the back shell it is recommended that a small amount of primer (Loctite® 7649) and
adhesive (Loctite® 271) be applied to the threads of the insulator body before proceeding.
2. Keeping the terminated insulator body on the fixture, re-assembly the plug in order shown.
4. Using the correct back-tightening collar tighten the back shell to the specified torque.
When tightening the collar make sure that the cable will NOT turn.
5. Remove the assembly from the fixture.
Note: Loctite is a registered trademark of the Henkel Loctite Corporation.
11
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BGeneral usage notes
1. Mating
2. Un-mating
Mounting panel
Receptacle
Cable
D
Plug
Push/pull locking collar
C
Cable
A
D
Alignment marks
B
C
When mounting, smooth mating will be achieved by holding plug
in any are “A” and aligning the arrow of the plug with that of the
receptacle ,then pushing the plug straight in.
When removing the plug from its connected condition, hold the
plug by push/pull locking collar (area “B”) and pull straight off.
BPrecautions
1. Do NOT apply force in excess of 30N in the directions shown below.
30 N max.
30 N max.
Panel
30 N max.
2. To maintain the water/dust protection performance and the cable clamp force, use a cable that is within the range of applicable cable diameter.
3. Consult HRS representative when using different cables.
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
12
相关型号:
HR30-6R-6SD(71)
Circular Connector, 6 Contact(s), Polyphenylene Sulfide, Female, Solder Terminal, Receptacle, ROHS COMPLIANT
HRS
©2020 ICPDF网 联系我们和版权申明