F11-E06 [ETC]
Encapsulated Thermostats for Electronics; 封装温控器的电子产品
| 型号： | F11-E06 |
| 厂家： | 
ETC |
| 描述： | Encapsulated Thermostats for Electronics |
| 文件： | 总2页 (文件大小：570K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Encapsulated Thermostats for Electronics
F11-E06
ADVANTAGES
The miniature size, high
switching
capability
and
versatility of its contacts make
theJEDECTO-220compatible
device ideal for printed circuit
board mounting. The F11-E06
is epoxy sealed to withstand
wave soldering and board
washing operations.
APPLICATIONS
DESCRIPTION
OPERATING
TEMPERATURES
The F11-E06 is ideal to
sense the temperature of
a surface or of stagnant air
in an enclosure and can
be supplied for mounting
on a printed circuit board
or with flexible wire leads
for remote installation. Its
high temperature resistance
and high dielectric strength
make it the favored device
for protecting heatsinks. Heat
sensitive semiconductors and
other valuable equipment
can be saved from thermal
damage by shutting down the
power or simply turning on a
fan.
The CANTHERM F11-E06 has
been designed to protect today’s
technologyandmeettherequirements
of tomorrow’s innovations. The F11
snap action bimetallic element will
respond rapidly and accurately to
changes in the temperature of the
surface to which it is mounted or the
air temperature in an enclosure. The
single pole, single throw contacts
can be configured as either normally
open or normally closed, operating
on rise in temperature. The average
automatic reset will occur at a
temperature approximately 20 - 25C
below the calibrated set point.
The F11-E06 is available from
65ºC to 160ºC with either
normally closed or normally
open contacts. Increments
are 5ºC and standard
tolerance is ±5ºC.
CONNECTIONS
The F11-E06 is available
for PC board mount or a
variety of flexible wire leads.
Standard leads are 6”, 24
AWG UL3266 Black up to
125ºC and UL1180 Teflon up
to the maximum temperature.
ADD “-PC” to the part number
for solid pins or specify flexible
lead type. Other wire types,
gauges and lead lengths
available upon request.
The housing has been designed for
demanding conditions such as high
continuous temperatures and high
voltage electrical isolation. The “New”
PC version is now available withTO-220
style stamped lead-frame leads and are
shipped in a 50 piece plastic magazine
for ease of insertion and handling.
8415 Mountain Sights Avenue • Montreal (Quebec), H4P 2B8, Canada
Tel: (514) 739-3274 • 1-800-561-7207 • Fax: (514) 739-2902
E-mail: sales@cantherm.com • Website: www.cantherm.com
Division of Microtherm
International Corporation
2006/May
CT-M-ENG-03B-1
Type
Voltage Rating 50-60 Hz
Current rating
N/C
120 V / 250 V
N/O
120 V / 250 V
F11-E06-PC
RESISTIVE
INDUCTIVE
3.0 A / 2.0 A
1.8A / 1.2 A
1 A / 1 A *
1 A / 1 A
max. load RES.
short circuit current upto
4.0 A
6.3 A
4.0 A
6.3 A
Contact Arrangment Normally closed N/C
Normally open N/O
Contact resistance
< 40 mΩ
< 40 mΩ
Response temperature range
Tolerance (minimum range)
70ºC to 160ºC
+65ºC to +150ºC
+/- 15ºC, +/-10ºC,
+/-5ºC
+/- 15ºC, +/-10ºC,
+/-5ºC
Max. permanent temperature - Housing
Switch mechanism
220ºC **
175ºC
220ºC **
175ºC
CURRENT SENSIVITY
The thermostats are not current sensitive at rated
currents. At loads above the rated values, up to
maximum loading there is self-heating of the current
carrying contacts.
F11-E06
* When N/0 contacts are closed, self heating will
occur at currents exceeding normal rating. It is
possible that, given certain combinations of set
temperature current & ambient temperature, the
contacts will not reset.
** Wire insulation must be appropriate
INSULATION RESISTANCE
Leads to Earth
2500 V @ 25°C
1500 V @ 100°C
On request
(Requires special testing)
up to 4000 V eff. AC @ 200°C
Across open contacts,
dependent on response
temperature
500 V eff. AC
RESPONSE TEMPERATURES,
TOLERANCE
Temperature stepped in 5°C increments. Special
switch-off and reset temperatures available on
request. Rate of temperature rise from 0.1° C/min.
to max. 1.0° C/min. Insulation of the housing will
slow down the cutout’s response.
ORDERING INFORMATION
Quantity
Type
Response
Temp.
Version
N/O or N/C
Tolerance
+/- 5ºC
100
F11
125º
1 or 2
5
We reserve the right to change specifications without
prior notice. ADD - PC to part number for PC lead
frame leads.
Typical PC P/N = F11125253600060
With Leads P/N = F1112525ACFA06E
QUALITY ASSURANCE
Housing material - PPS (UL 94 V-0)
Contacts - Silver plated
MTBF - 10,000 cycles at rated current and voltage
Minimum switching current 50ma
Random sample quality testing
Function test to AQL 1.0
UL E46827
VDE 4523-4510-1015
It is the responsibility of the
customer to insure that the
devices descibed above are
used in a safe manner and
within published parameters.
Nominal response temperature AQL 1.0
Measurement tolerance ±2°C AQL 4.0
Other values AQL 4.0
Thermal conductivity - 4.0 BTU In/hr/Ft2/ºF
CT-M-ENG-03B-1
相关型号：
©2020 ICPDF网 联系我们和版权申明