DHCR15 [ETC]
LD Terminals, Hand Tools & Accessories; LD端子，手工具及配件
| 型号： | DHCR15 |
| 厂家： | 
ETC |
| 描述： | LD Terminals, Hand Tools & Accessories |
| 文件： | 总3页 (文件大小：222K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LD Terminals, Hand Tools & Accessories
Hand Crimping Tools (With Controlled Calibrating Devices)
The Davico range of Hand Crimping Tools has been selected to comply with all variations to
customer specification and have the added advantage of compressing other manufacturers
terminals.
Triple Jaw Rachet Tool with
Triple Jaw Rachet Tool with
controlled calibration suitable
controlled calibration suitable
DHCR 15
for crimping miniature
insulated terminals .05 to 2.55
mm².
DHCR 10
for crimping .25 to 6 mm²
insulated terminals.
Triple Jaw Rachet Tool with
controlled calibration suitable
for crimping non insulated
male/female disconnect
terminals with 'F' crimp
configuration.
Four Jaw Ratchet Tool with
controlled calibration suitable
for crimping 1.5 to 16 mm²
Davico copper tube terminals.
DHCR
1516
DHCRF
15
Double Jaw Rachet Tool with
controlled calibration suitable
for 'F' crimp type miniature
terminals/pins .102 mm² to .25
mm².
Double Jaw Rachet Tool with
controlled calibration suitable
for 'F' crimp type terminals .12
mm² to .5 mm².
DHCRF
05
DHCRF
025
Six Jaw Rachet Tool with
controlled calibration suitable
for crimping insulated and non
insulated cord end terminals .5
to 10 mm².
Triple Jaw Ratchet Tool with
controlled calibration suitable
for crimping insulated and non
insulated cord end terminals
16, 25 and 35 mm².
DCER
510
DCER
1635
Double Jaw Ratchet Tool with
controlled calibration suitable
for crimping fully insulated
nylon right angle flag
Triple Jaw Ratchet Tool with
controlled calibration suitable
for crimping insulated heat
shrink terminals prior to
DHCR-
FL
DHCR-
HS
terminals 0.25 to 2.5 mm².
application of heat gun.
The Compression ratio has no
detrimental effect on the
heatshrink insulation .25 to 6
mm².
Ratchet Tool for co-axial
cables with controlled
calibration jaw sets
DHCR-
CA
RG58/RG59 but other sets are
available.
THE ABOVE TOOLS CAN BE CALIBRATED MANUALLY AND PROVED IN
ACCORDANCE WITH ALL INTERNATIONAL STANDARDS
相关型号：
DHD-PA100-R12NNO
D Type Connector, 100 Contact(s), Male, 0.05 inch Pitch, Solder Kinked Leads Terminal, Receptacle
DDK
DHD-PA34-R121NO
D Type Connector, 34 Contact(s), Male, 0.05 inch Pitch, Solder Kinked Leads Terminal, Receptacle
DDK
DHD-PA34-R12NNO
D Type Connector, 34 Contact(s), Male, 0.05 inch Pitch, Solder Kinked Leads Terminal, Receptacle
DDK
DHD-PA50-R121NO
D Type Connector, 50 Contact(s), Male, 0.05 inch Pitch, Solder Kinked Leads Terminal, Receptacle
DDK
DHD-PA50-R12NNO
D Type Connector, 50 Contact(s), Male, 0.05 inch Pitch, Solder Kinked Leads Terminal, Receptacle
DDK
DHD-PA80-R121NO
D Type Connector, 80 Contact(s), Male, 0.05 inch Pitch, Solder Kinked Leads Terminal, Receptacle
DDK
DHD-PB100-S131NO-FA
D Type Connector, 100 Contact(s), Male, 0.05 inch Pitch, Solder Terminal, Locking, Plug
DDK
DHD-PB100-S31NNO
D Type Connector, 100 Contact(s), Male, 0.05 inch Pitch, Solder Kinked Leads Terminal, Receptacle
DDK
DHD-PB100-S321NO
D Type Connector, 100 Contact(s), Male, 0.05 inch Pitch, Solder Kinked Leads Terminal, Receptacle
DDK
DHD-PB100-S331NO
D Type Connector, 100 Contact(s), Male, 0.05 inch Pitch, Solder Kinked Leads Terminal, Receptacle
DDK
DHD-PB80-S31NNO
D Type Connector, 80 Contact(s), Male, 0.05 inch Pitch, Solder Kinked Leads Terminal, Receptacle
DDK
DHD-PB80-S32NNO
D Type Connector, 80 Contact(s), Male, 0.05 inch Pitch, Solder Kinked Leads Terminal, Receptacle
DDK
©2020 ICPDF网 联系我们和版权申明