DC2.0GHZ [ETC]

Digital Attenuator, 1 Bit, 10 dB Step DC2.0 GHz ; 数字衰减器, 1位10分贝步DC2.0 GHz的\n
DC2.0GHZ
型号: DC2.0GHZ
厂家: ETC    ETC
描述:

Digital Attenuator, 1 Bit, 10 dB Step DC2.0 GHz
数字衰减器, 1位10分贝步DC2.0 GHz的\n

衰减器
文件: 总2页 (文件大小:70K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
AT-266  
Digital Attenuator, 1 Bit, 10 dB Step  
DC - 2.0 GHz  
SOT-25 Plastic Package  
Features  
Single 10 dB Step  
Low Loss 0.3dB Typ. @ 900 MHz  
Low Cost Plastic SOT25 Package  
.114 ± .008  
2,9 ± 0,2  
.075 ± .008  
1,90 ± 0,2  
+ .008  
.043  
- .004  
+ 0,2  
- 0,1  
1,10  
Description  
M/A-COM’s AT-266 is a 1 bit, 10 dB step GaAs MMIC Digital  
Attenuator in a low cost SOT-25 surface mount plastic package.  
The AT-266 is ideally suited for use where high accuracy, very  
low power consumption and low intermodulation products are  
required. Typical applications include radio, wireless LANs,  
GPS equipment and other gain/level control circuits.  
.110 ± .008  
2,80 ± 0,2  
.063 ± .004  
1,6 ± 0,1  
.008 MIN  
0,20 MIN  
Pin 1  
+ .004  
.006  
0,15  
- .002  
+ 0,1  
- 0,05  
.002 ± .002  
0,05 ± 0,05  
+ .004  
The AT-266 is a GaAs MMIC using a mature 1 micron process.  
The process features full chip passivation for increased perfor-  
mance and reliability.  
.031  
0,80  
- .007  
+ 0,1  
- 0,18  
+ .004  
- .002  
+ 0,1  
.016  
0,40  
- 0,05  
Truth Table  
MODE (Control)  
Postive1  
Pin Configuration  
V1  
V2  
Atten.  
PIN No.  
Function  
Description  
RF11  
GND1  
RF In/Out  
0 ± 0.2V  
+3 to +8V  
0 ± 0.2V  
10 dB  
IL  
1
2
+3 to +8V  
RF Ground  
Postive / Negative1,2  
Negative3  
-VC ± 0.2 V  
+ VC  
+VC  
10 dB  
IL  
3
4
5
RF21  
RF In/Out  
-VC ± 0.2V  
V1  
Control Voltage  
Control Voltage  
0 ± 0.2V  
-3V to -8V  
0 ± 0.2V  
IL  
V2  
-3V to -8V  
10 dB  
1. External DC blocking capactors are required as noted1  
2. | -VC | + VC 8 V.  
3. If negative control is used, DC blocking capacitors are not  
required on RF Ports.  
1. Series Capacitors on PINs1, 3 and 5, Shunt Capacitor on PIN 2  
are required for Postive Control. 39pF capacitors used for pos-  
tive control performance curves.  
Electrical Specifications TA = 25°C1  
Parameter  
Insertion Loss  
Test Conditions  
Units  
dB  
Min.  
Typ.  
0.3  
0.5  
10  
Max.  
0.45  
0.7  
0 - 1 GHz  
Insertion Loss  
Attenuation  
1 - 2 GHz  
dB  
0 - 1 GHz  
dB  
±0.4  
±0.5  
1.5:1  
1 - 2 GHz  
dB  
10  
VSWR  
IP3  
0 - 2 GHz  
1.4:1  
50  
2 Tone @ 0 dBm, 5 MHz spacing  
1 GHz  
dBm  
dBm  
ns  
42  
23  
P1dB  
28  
10% to 90% RF, 90% to 10% RF  
50% Control to 90% RF, 50% Control to 10% RF  
In Band  
5
20  
25  
10  
Trise, Tfall  
Ton, Toff  
Transients  
ns  
10  
mV  
6
V2.00  
1. All measurements at 1.0 GHz, -3 Volts control unless otherwise specified.  
M/A-COM Division of AMP Incorporated Q North America: Tel. (800) 366-2266, Fax (800) 618-8883 Q Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087  
Q Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020  
www.macom.com  
AMP and Connecting at a Higher Level are trademarks.  
Specifications subject to change without notice.  
Digital Attenuator, 1 Bit, 10 dB Step, DC - 2.0 GHz  
AT-266  
Absolute Maximum Ratings1  
Ordering Information  
Parameter  
Absolute Maximum  
Part Number  
Package  
Max. Input Power  
AT-266  
SOT-25 Plastic Package  
Forward Tape and Reel1  
Reverse Tape and Reel1  
50 MHz  
+27 dBm  
+34 dBm  
AT-266TR  
500 - 2000 MHz  
AT-266RTR  
Control Voltage  
+5V, -8.5V  
Operating Temperature  
Storage Temperature  
-40°C to +85°C  
-65°C to +150°C  
1. Refer to Application Note M513 for reel size information.  
1. Operation of this device above any one of these parameters may  
cause permanent damage.  
Typical Performance Curves  
Insertion Loss vs. Frequency Over  
Temperature (Postive Control)  
Insertion Loss vs. Frequency Over  
Temperature (Negative Control)  
1
1
0.9  
0.8  
0.9  
0.8  
0.7  
0.7  
+85°C  
0.6  
+25°C  
-40°C  
0.6  
0.5  
0.4  
0.3  
0.2  
0.1  
0
+25°C  
0.5  
0.4  
0.3  
0.2  
0.1  
0
+85°C  
-40°C  
0
0.5  
1
1.5  
2
2.5  
3
0
0.5  
1
1.5  
2
2.5  
3
FREGUENCY (GHz)  
FREGUENCY (GHz)  
Relative Attenuation vs. Frequency Over  
Temperature (Posative Control)  
Relative Attenuation vs. Frequency Over  
Temperature (Negative Control)  
11  
10.8  
10.6  
10.4  
10.2  
10  
11  
10.8  
10.6  
10.4  
10.2  
10  
-40°C  
-40°C  
+25°C  
+25°C  
9.8  
9.6  
9.4  
9.2  
9
9.8  
9.6  
+85°C  
9.4  
+85°C  
9.2  
9
0
0.5  
1
1.5  
2
2.5  
3
0
0.5  
1
1.5  
2
2.5  
3
FREGUENCY (GHz)  
FREGUENCY (GHz)  
Return Loss vs. Frequency  
(Reference State)  
Return Loss vs. Frequency  
(10 dB State)  
40  
35  
30  
25  
20  
15  
10  
5
35  
30  
25  
20  
15  
10  
5
Negative Control  
Negative Control  
Positive Control  
Positive Control  
0
0
0
0.5  
1
1.5  
2
2.5  
3
0
0.5  
1
1.5  
2
2.5  
3
FREQUENCY (GHz)  
FREQUENCY (GHz)  
V2.00  
M/A-COM Division of AMP Incorporated Q North America: Tel. (800) 366-2266, Fax (800) 618-8883 Q Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087  
Q Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020  
www.macom.com  
AMP and Connecting at a Higher Level are trademarks.  
Specifications subject to change without notice.  

相关型号:

DC2.5BDC4

Peizoresistive Sensor, Differential, 0.05%, Rectangular, Through Hole Mount
HONEYWELL

DC2.5BDC5

Peizoresistive Sensor, Differential, 0Psi Min, 0.036Psi Max, 3.25-8.25V, Rectangular, Through Hole Mount
HONEYWELL

DC2.5BDR5

Peizoresistive Sensor, Differential, 0Psi Min, 0.036Psi Max, 3.25-8.25V, Rectangular, Through Hole Mount
HONEYWELL

DC2.5BGC4

Peizoresistive Sensor, Gage, 0.05%, Rectangular, Through Hole Mount
HONEYWELL

DC2.5BGR4

Peizoresistive Sensor, Gage, 0.05%, Rectangular, Through Hole Mount
HONEYWELL

DC2.5BGR5

Peizoresistive Sensor, Gage, 0Psi Min, 0.036Psi Max, Rectangular, Through Hole Mount
HONEYWELL

DC20

20 SEGMENT BAR GRAPH ARRAY
KINGBRIGHT

DC20-10-8C

Consumer IC
ETC

DC20-20EWA

20 SEGMENTS BAR GRAPH ARRAY
KINGBRIGHT

DC20-20GWA

20 SEGMENTS BAR GRAPH ARRAY
KINGBRIGHT

DC20-20SRWA

20 SEGMENTS BAR GRAPH ARRAY
KINGBRIGHT

DC20-20YWA

20 SEGMENTS BAR GRAPH ARRAY
KINGBRIGHT