C517-3A [ETC]
Fuse ; 保险丝\n
ETC 
®
Bu s s m a n n
Lig h t Ba lla s t P ro t e c t io n
5 m m x 1 5 m m Ce ra m ic Fu s e
C5 1 7
Dimensional Data
±
15.0 0.5mm
5.2 ± 0.3mm
5.0mm (Typ.)
0.6mm Dia. (Typ)
Markings: Manufacturer’s Symbol,
Product Symbol, Voltage, Ampere,
Testing Agency Mark (Optional)
Dimensions are in
Millimeters (mm)
Time-Current Characteristic Curves–Average Melt
(Full Size Curves Available)
AMPERE
RATING
100
C517 Axial Leaded Fast-Acting Fuse.
Limits for Pre-arcing Time/UL Listed Fuses.
135%
MAX
1 hr.
110%
MIN
200%
MAX
Amp Ratings
10
3A
4 hr.
2 sec.
Time-Current Characteristics: (at 25°C Ambient)
Current
3.30
% of Rating
100%
135%
200%
300%
400%
500%
800%
1000%
Opening Time
4 hours min.
400 sec. typ.
0.550 sec. typ.
0.100 sec. typ.
0.046 sec. typ.
0.027 sec. typ.
0.007 sec. typ.
0.004 sec. typ.
4.05A
6.00A
9.00A
12.0A
15.0A
24.0A
30.0A
1
.1
Agency File Numbers: UL Listing. File E75865,
Guide # JDYX.
CSA Certification. File LR65063,
Class 1422-01.
UL Recognized. File E75865,
Guide # JDYX2.
.01
CURRENT IN AMPERES
Product Symbol:
C517
Physical Fuse Size:
5 x 15mm
Mechanical Characteristics:
Materials:
Endcaps are silver-plated brass; leads are
tin-plated copper and tube is glass.
CE logo denotes compliance with European Union Low Voltage Directive
(50-1000V AC, 75-1500V DC). Refer to BIF document #8002 or contact
Bussmann Application Engineering at 314-527-1270 for more information.
Optional sleeve is flexible fluoropolymer (UL
Flammability rating VW-1). The tube will self
extinguish within one minute. 25% maximum
flag burn per ASTM Flammability Test ASTM
D2671 Procedure C.
Lead Pull:
Leads will withstand a seven pound pull
applied axially to the lead for five seconds.
Lead Bend:
Leads will be bent 90 degrees in one direction,
back to original direction, then 90 degrees in
the opposite direction and return to the cycle.
Leads will withstand two cycles. The bending
is to be done with a two pound weight
attached to the end of the lead.
Temp. Range: -55°C to +85°C with proper derating.
Weight: 1000 = 1.33kg.
Form No. C517
Page 1 of 2
BIF Doc #2025
12-17-98
SB98107
Rev. A
®
Bu s s m a n n
Lig h t Ba lla s t P ro t e c t io n
5 m m x 1 5 m m Ce ra m ic Fu s e
C5 1 7
Electrical Characteristics:
Max. Rated
Voltage
AC
Typical
Pre-arcing
Typical Voltage
Drop at 100%
Rated Current (mV)
Ampere
Rating
Interrupting
Rating
2
2
I t (A S)
100A/350VAC
p.f. = 1.0
100A/250VAC
p.f. = 0.7 - 0.8
3A
350V
5.2
160
•
•
•
10kA/125VAC
p.f. = 0.7 - 0.8
Marking: Endcaps will bear the following markings: manufacturer’s symbol, product symbol, ampere rating, agency approval symbols and voltage rating
(250V).
Note: parts can not be marked 350V since there is no provision within the CSA Standards for a 350V certification of a product in this case size.
Smallest packages will bear 125V, 250V and 350V rating information.
Packaging & Ordering Information:
C517
3A
Product
Symbol
Ampere
Rating
Blank - Standard
S - Transparent
sleeve for
Package Code
sealed fuses.
BK/ Bulk Package (100 pcs)
TR/ Tape & Reel (500 pcs)
TR1/ Tape & Reel (1,000 pcs)
TR2/ Tape & Reel (1,500 pcs)
NOTE: Tape & Reel Packaging
per EIA 296-E (10.2mm Component
Pitch and 52.4mm Tape-to-Tape Spacing)
The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to
clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any
products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been select-
ed, it should be tested by the user in all possible applications.
Form No. C517
Page 2 of 2
BIF Doc #2025
12-17-98
SB98107
Rev. A
相关型号：
©2020 ICPDF网 联系我们和版权申明