B74G-4GK-AP3-RMN [ETC]
FILTER REGLER OELER 0.5ZOLL ; FILTER Regler公司OELER 0.5ZOLL\n型号: | B74G-4GK-AP3-RMN |
厂家: | ETC |
描述: | FILTER REGLER OELER 0.5ZOLL
|
文件: | 总4页 (文件大小:65K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
B74G
®
EXCELON Series 74
Filter/Regulator
3/8", 1/2", 3/4" Port Sizes
● EXCELON design allows in-line or modular
installation
● High efficiency water and particle removal
● Quick release bayonet bowl
● Particle removal per ISO 8573-1, Class 5 and Class 3
● Push to lock adjusting knob with tamper resistant
accessory
● Patented quarter turn manual drain
Technical Data
Fluid: compressed air
Maximum Pressure:
Transparent bowl: 10 bar
Ordering Information
See Ordering Information on following pages.
Metal bowl: 17 bar
Operating Temperature*:
Transparent bowl: -20° to 50°C
Metal bowl: -20° to 80°C
*Air supply must be dry enough to avoid ice formation at temperatures below 2°C.
Manual drain connection: 7/16" X 24 TPI (1/4" male OD tube)
Automatic drain connection: 1/8 BSP
Typical flow with 10 bar inlet pressure, 6,3 set pressure and a
droop of 1 bar from set:
ISO Symbols
100 dm3/s
Automatic drain minimum operating conditions:
Pressure: 0,7 bar
Flow: 0,25 dm3/s
Gauge Ports:
Automatic Drain, Relieving
Manual Drain, Relieving
1⁄4" PTF with PTF main ports
1⁄4" ISO Rc with ISO Rc main ports
1⁄8" ISO Rc with ISO G main ports
Materials:
Body: Aluminium
Bonnet: Aluminium
Valve: Brass
Automatic Drain, Non-Relieving
Manual Drain, Non-Relieving
Bowl:
Plastic: Polycarbonate with zinc bowl guard
Metal: Aluminium
Metal bowl liquid level indicator lens:
Transparent nylon (Pyrex optional)
Element: Sintered plastic
Elastomers: Neoprene and Nitrile
Our policy is one of continued research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
5/96
N/UK 8.7.063.01
Issue No.1 Revision 0
B74G
Typical Performance Characteristics
FLOW CHARACTERISTICS
PORT SIZE: 1/2" RANGE: 0,3 to 10 bar
8
6
4
2
ELEMENT: 40µm INLET PRESSURE: 10 bar
0
0
20
40
60
80
100
AIR FLOW - dm3/s
Ordering Information. Models listed include ISO G parallel threads, knob adjustment, transparent bowl with guard, 40µm
element, relieving diaphragm and 0,3 to 10 bar outlet pressure adjustment range*.
Main Port Size
G3/8
G1/2
Model Number
Flow† dm3/s
77
100
100
Weight kg
1,19
1,17
B74G-3GK-AP3-RMN
B74G-4GK-AP3-RMN
B74G-6GK-AP3-RMN
G3/4
1,16
† Typical flow with 10 bar inlet pressure, 6,3 bar set pressure and a 1 bar droop from set.
Alternative Models
★ ★ ★ ★ ★ ★ ★ ★ ★
B 7 4 G
-
-
-
Threads
Substitute
Gauge
Substitute
PTF
ISO Rc taper
ISO G parallel
A
B
G
With ( 50 mm)
Without
G
N
Outlet Pressure
Adjustment Range*
0,3 to 4 bar
0,3 to 10 bar
0,7 to 17 bar**
Substitute
Adjustment
Knob
T-bar
Substitute
F
M
S
K
T
Drain
Automatic
Manual, 1/4 turn
Substitute
Diaphragm
Relieving
Non relieving
Substitute
A
Q
R
N
Bowl
Substitute
Element
5 µm
40 µm
Substitute
Metal with liquid level indicator
Transparent with guard
D
P
1
3
* Outlet pressure can be adjusted to pressures in excess of, and less
than, those specified. Do not use these units to control pressures
outside of the specified ranges.
** Units with 17 bar outlet pressure range are available only with the
T-bar adjustment; therefore substitute T at the 7th digit and S at the
12th position.
Accessories
Wall Mounting Bracket
4324-50
50 mm Gauge
R1/8 Connection
Metal Panel Nut
4389-89
Tamper Resistant Cover
& Seal Wire††
4 bar: 18-013-011
10 bar: 18-013-013
25 bar: 18-013-014
4355-51
Seal Wire: 2117-01
†† Use padlock with shackle up to 8 mm (0.3") in diameter.
Our policy is one of continued research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
N/UK 8.7.063.02
Issue No.1 Revision 0
5/96
B74G
Panel mounting hole diameter:
52 mm
Panel thickness:
2 to 6 mm
80
80
* Reduce by 16 mm
for automatic drain.
† Minimum clearance to remove bowl.
Bracket Mounting
Use 5 mm screws to mount
bracket to wall.
69
Bracket Kit Reference
Model
Part No.
4324-50
All Models
Port C
L
37
4
25
Port C
L
Service Kits
Item
Type
Part Number
4383-700
4383-701
4338-04
Relieving
Non-relieving
5 µm
Service kit
Replacement elements
40 µm
4338-05
Liquid level lens kit
Replacement drains
Prismatic
4380-050
Automatic (G1/8 outlet)
Manual 1/4 turn
3000-97
619-50
Service kit includes diaphragm assembly, valve assembly, valve spring,
louvre o-ring, bowl o-ring, drain seal.
Our policy is one of continued research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
5/96
N/UK 8.7.063.03
Issue No.1 Revision 0
B74G
Warning
These products are intended for use in industrial compressed air systems
only. Do not use these products where pressures and temperatures can
exceed those listed under ‘Technical Data’.
Before using these products with fluids other than those specified, for non-
industrial applications, life-support systems, or other applications not within
published specifications, consult NORGREN.
Through misuse, age, or malfunction, components used in fluid power
systems can fail in various modes. The system designer is warned to
consider the failure modes of all component parts used in fluid power
systems and to provide adequate safeguards to prevent personal injury or
damage to equipment in the event of such failure.
System designers must provide a warning to end users in the system
instructional manual if protection against a failure mode cannot be
adequately provided.
System designers and end users are cautioned to review specific warnings
found in instruction sheets packed and shipped with these products.
Our policy is one of continued research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
N/UK 8.7.063.04
Issue No.1 Revision 0
5/96
相关型号:
©2020 ICPDF网 联系我们和版权申明