AV090003A940N [ETC]
Anti-vandal and security pushbutton switches; 防暴和安全按钮开关
| 型号： | AV090003A940N |
| 厂家： | 
ETC |
| 描述： | Anti-vandal and security pushbutton switches |
| 文件： | 总31页 (文件大小：1199K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
AV series
Anti-vandal and security pushbutton switches
Distinctive features
❑ Attractive, robust and durable
• Irremovable
• Anti-jamming construction : reduced travel to prevent insertion of foreign parts
• Contact and mechanism protected against crushing
• Fire resistant
• Long life
❑ Different bushing sizes and actuator shapes
❑ Sealed versions
B2
❑ Degree of protection of sealed versions (switches mounted on
vertical panels) : IP65 to IP67 or IP69K depending on models
❑ UL/CSA approved models
The AV series is a large range of very robust pushbutton switches, consisting of 2 families :
ANTI-VANDAL PUSHBUTTON SWITCHES (pages 77-79)
• Great robustness (impact resistance IK08 (Ø 19 mm) and IK10 (Ø 22 mm)
• Actuator and bushing : stainless steel
• Bushing Ø19 mm (.748) or 22 mm (.866
SECURITY PUSHBUTTON SWITCHES (pages 80-106)
• Large variety of models
• Actuator and bushing : nickel plated, chrome plated or polished varnished brass, stainless steel
• Bushing diameter 16 mm (.629), 19 mm (.748), 22 mm (.866) or 24 mm (.944)
• Marking, illumination, tactile feedback
• Numerous electrical functions (momentary or maintained)
Gasket
EXAMPLES OF MOUNTING FOR SEALED VERSIONS
❑
Preferred
For thin panels
With boot U2187 (sect. H)
Dimensions : first dimensions are in mm while inches are shown as bracketed numbers.
Packaging unit : specified on the following pages.
Mounting accessories : Standard and special hardware are presented in section I.
Sealing boots are available for models with Ø 19 mm (.748) bushing. See Section H.
B2-76
www.apem.com
APEM
AV series
Anti-vandal pushbutton switches
Distinctive features and specifications
❑ Very robust
Impact resistance IK08 for model Ø 19 mm (.748)
and IK10 for model Ø 22 mm (.866)
❑ Stainless steel actuator and bushing
❑ UL-CSA approved (long case only)
B2
SPECIFICATIONS
MATERIALS
• Max. current/voltage rating with resistive load :
- A contacts : 4A 12VDC, 500.000 cycles
• Case : PBT
• Contacts : silver (A)
or brass, silver plated (C)
• Bushing : stainless steel
• Actuator : stainless steel
- C contacts : 2A 48 VDC, 10.000 cycles
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
2.000 Vrms 50 Hz min. between terminals
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 11 mm (.433) max.
• Operating temperature : -30°C to +70°C
CUT-OUT
• Panel cut-out :
Ø 19,2 mm (.755)
• Low level or mechanical life : 1.000.000 cycles
• Hand soldering : 300°C, 3 sec. max.
or Ø 22,2 mm (.874)
• Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
• Packaging unit : 20 pieces (models Ø 22) or 40 pieces (models Ø 19)
ROBUSTNESS
SEALING ( OPTION T )
Model Ø 19 mm (.748)
Model Ø 22 mm (.866)
2
5 Kg
1.7 Kg
Degree of protection
according to
EN 50102, June 95
(NFC 20-015)
IK08
IK10
40 cm
29.5 cm
Striking energy:
5 joules
Striking energy
:
20 joules
(20Nm)
1
(5Nm)
Hammer radius 25 mm
Hammer radius 50 mm
Front panel sealing (IP65)
Increased impact resistance provided by a nut or mechanical stop.
❑
internal gasket
❑
external gasket
Option N does not include ❑ nor ❑.
APEM
www.apem.com
B2-77
AV series
Anti-vandal pushbutton switches Ø 19 mm (.748)
Momentary (NO)
ORDER FORMAT
AV
3
40
Bush./act.
material
Actuator type
Case
000 Long
100 Short
Function
Contacts
Terminals
Sealing
No
Sealed
SERIES
09 Flat
19 Curved
9D Flush
3
NO
A
C
Silver
9
Screw
Quick-
connect
N
T
40 Stainless
Brass,
2
NO
steel
silver pl.
(function 3)
In the following model numbers, replace • with elements selected in the above order format.
B2
Hex nut 22 (.866) across flats
Flat actuator - short case - 48VDC - AV09100
3.00
(.118)
ø19.00x1.00 SI
(.748DIAx1.00 IS)
7.30
(.287)
5.00
(.196)
2.80
(.110)
Screw terminals
AV091003•940•
Solder lug /
quick-connect term.
AV091003•240•
2.00
9.50
6.50
3.00
EPOXY
(.078)
(.374)
(.255)
(.118)
2
Screw terminals for wires 1,5 mm max.
Hex nut 22 (.866) across flats
Flat actuator - long case - 4A 250VAC/8A125VAC - UL/CSA - AV09000
3.00
Ø19.00x1.00 SI
(.748DIAx1.00 IS)
(.118)
5.00
(.196)
Screw terminals
AV090003A940•
To order switches marked UL-CSA, add
“UU”at the end of model number.
2.00
(.078)
11.60
(.456)
6.50
(.255)
7.20
(.283)
2
Screw terminals for wires 1,5 mm max.
Curved actuator - AV19
Flush model - AV9D
Ø22.00
(.866DIA)
Ø22.00
(.866DIA)
Ø22.20 Mini
(.874DIA Min.)
Ø15.00
(.590DIA)
Ø19.20
(.755DIA)
Screw terminals
Screw terminals
Panel cut-out
AV19•003•940•
AV9D•003•940•
Solder lug/quick-connect term. (short case)
AV191003•240•
Solder lug / quick-connect terminals (short case only)
AV9D1003•240•
B2-78
www.apem.com
APEM
AV series
Anti-vandal pushbutton switches Ø 22 mm (.866)
Momentary (NO)
ORDER FORMAT
AV
3
40
Bushing/act.
configuration
03 Flat act.
02 Curved act.
M3 Flat act +
flatted bush.
M2 Curved act.+
flatted bush.
Bush./act.
material
Case
000 Long
100 Short
Function
Contacts
Terminals
Sealing
No
Sealed
SERIES
3
NO
A
C
Silver
9
Screw
Quick-
connect
N
T
40 Stainless
Brass,
2
NO
steel
silver pl.
(function 3)
In the following model numbers, replace • with elements selected in the above order format.
B2
Hex nut 25 (.984) across flats
Flat actuator - short case - 48VDC - AV03100
ø22.00x1.00 SI
(.866DIAx1.00 IS)
7.30
2.00
(.287)
3.00
(.078)
(.118)
2.80
(.110)
Screw terminals
AV031003•940•
Solder lug /
quick-connect term.
AV031003•240•
EPOXY
12.70
(.500)
6.30
(.248)
5.00
(.196)
2
Screw terminals for wires 1,5 mm max.
Hex nut 25 (.984) across flats
Flat actuator - long case - 4A 250VAC/8A125VAC - UL/CSA - AV03000
Ø22.00x1.00 SI
(.866DIAx1.00 IS)
2.00
3.00
(.078)
(.118)
Screw terminals
AV030003A940•
To order switches marked UL-CSA, add
“UU” at the end of model number.
15.00
(.590)
10.00
(.248)
5.00
(.196)
2
Screw terminals for wires 1,5 mm max.
Curved actuator - AV02
Flatted bushing - AVM3 and AVM2
Ø25.00
Ø15.00
Ø25.00
(.984DIA)
(.984DIA)
(.590DIA)
Ø15.00
(.590DIA)
Ø22.20
(.874DIA)
Flat actuator, screw terminals
AVM3•003•940•
Screw terminals
10.00
(.393
AV02•003•940•
)
Solder lug / quick-connect (short case)
AV021003•240•
Curved actuator, screw terminals
AVM2•003•940•
Panel cut-out
APEM
www.apem.com
B2-79
AV series
Snap action security pushbutton switches Ø 16 mm (.629)
Momentary (NO)
ORDER FORMAT
AV
3
0
C
9
OPTIONS
Bushing/act. configur.
06 Flat actuator
See “Options”
page.
Function
Case
Short
Contacts
Brass,
silver pl.
Terminals
SERIES
16 Curved actuator
3
NO
0
C
9
Screw
08 Curved act.+chamfer
07 Flat act.+chamfer
6P Flat act.+knurled nut
6B Curved act.+knurled nut
NO
(function 3)
SPECIFICATIONS
MATERIALS
• Travel : 1,60 mm (.063) 0,3 mm (.011)
• Max. current/voltage rating with resistive load :
200mA 48 VDC - 100mA 48VDC
• Case : PBT
• Contacts : brass, silver plated (C)
• Bushing and actuator : see
“Options” page
B2
• Initial contact resistance : 50 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 50.000 cycles at 200mA 48VDC
100.000 cycles at 100mA 48VDC
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -30°C to +70°C
• Low level or mechanical life : 1.000.000 cycles
• Packaging unit : 60 pieces
CUT-OUT
• Panel cut-out : Ø 16,2 mm
(.637)
• Min. pitch for matrix mounting :
24 mm x 24 mm (.944 x .944)
(AV6P & AV6B : 20 mm x 20 mm)
To order a product, select a basic model below and add the desired options.
BASIC MODEL
Hex nut 19 (.748) across flats
Flat or curved actuator - screw terminals
3.00
(.118)
3.00
(.118)
Flat actuator
AV0630C9
Curved actuator
AV1630C9
11.20
(.440)
1.50
(.059)
9.50
(.374)
2
Screw terminals for wires 1,5 mm max.
With chamfer
With knurled nut for matrix mounting 20 x 20 - AV6P and AV6B
Ø18.00
(.708DIA)
Ø18.00
(.708DIA)
20.00
(.787)
20.00
(.787)
Ø12.00
(.472DIA)
Ø12.00
(.472DIA)
Ø18.00
(.708DIA)
Ø18.00
(.708DIA)
Curved actuator
AV0830C9
Flat actuator
AV0730C9
Flat actuator
AV6P30C9
Curved actuator
AV6B30C9
Wrench available
under P/N U1990.
B2-80
www.apem.com
APEM
AV series
Security pushbutton switches Ø 16 mm (.629)
Latching action
ORDER FORMAT
AV
1
1
A
OPTIONS
See “Options”
page.
Actuator
06 Flat
16 Curved
Function
Off-On
Case
Long
Contacts
Terminals
SERIES
1
1
A
Silver
2
4
8
Solder
PC
Quick-
connect
OFF
ON
SPECIFICATIONS
MATERIALS
• Max. current/voltage rating with resistive load : 1A 24VDC
• Initial contact resistance : 50mΩ max.
• Case : PA-6T, UL94-V0
• Contacts : silver (A)
B2
• Insulation resistance : 1 GΩ min. at 500VDC
Gold plated silver (AD) on request
• Bushing and actuator : see
“Options” page
• Dielectric strength : 1.500 Vrms 50 Hz min. between terminals
1 000 Vrms 50 Hz between terminals and frame
• Electrical life : 100.000 cycles at 1,5A 250VAC
40.000 cycles at 1A 24VDC
• Torque : 5 Nm min. - 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -30°C to +70°C
• Low level or mechanical life : 200.000 cycles
• Hand soldering : 300°C, 5 sec. max.
CUT-OUT
• Panel cut-out : Ø 16,2 mm (.637)
• Min. pitch for matrix mounting :
24 mm x 24 mm (.944 x .944)
• Packaging unit : 25 pieces
To order a product, select a basic model below and add the desired options.
BASIC MODEL
Hex nut 19 (.748) across flats
Flat or curved actuator - solder lug terminals
3.40
(.133)
3.00
(.118)
3.00
(.118)
2.30
(.090)
Flat actuator
AV0611A2
OFF
OFF
-
-
ON
ON
Curved actuator
AV1611A2
EPOXY
1.50
(.059)
9.00
(.354)
15.20
(.598)
Straight PC terminals
Quick-connect terminals
0.50
(.019)
EPOXY
EPOXY
5.08
(.200)
1.10
(.043)
0.50
(.019)
1.20
(.047)
2.80
(.047)
Flat actuator
AV0611A4
Curved actuator
Flat actuator
AV0611A8
Curved actuator
AV1611A4
AV1611A8
APEM
www.apem.com
B2-81
AV series
Security pushbutton switches Ø 16 mm (.629)
Options
Bushing/act.
material
After selecting basic model number,
fill in last 2 boxes
Sealing
with desired options.
BASIC MODEL
BUSHING/ACTUATOR MATERIALS
Flat or curved metal actuator
CODE
BUSHING
ACTUATOR
00 (standard)
10
40
Nickel plated brass
Nickel plated brass
Stainless steel
Nickel plated brass
Stainless steel
Stainless steel
B2
SEALING
Blank
No sealing
K
Front panel sealing (IP65)
B2-82
www.apem.com
APEM
AV series
Security pushbutton switches Ø 19 mm (.748)
Momentary (NO)
ORDER FORMAT
AV
3
OPTIONS
See “Options”
page.
Bushing/act. config.
Case
000 Long
100 Short
Function
Contacts
Terminals
SERIES
09 Flat actuator
19 Curved actuator
9P Flat act., knurled nut
9B Curved act., knurled nut
3
NO
A
C
Silver
9
2
Screw
Quick-
connect
Brass
NO
silver pl.
(function 3)
SPECIFICATIONS
MATERIALS
• Max. current/voltage rating with resistive load :
- A contacts : 4A 12VDC, 500.000 cycles
- C contacts : 2A 48 VDC, 10.000 cycles
• Case : PBT
• Contacts : silver (A)
B2
or brass, silver plated (C)
• Bushing and actuator : see
“Options” page
• Approved ratings of models with long case and A contacts (AV..000) :
UL-CSA : 4A 250VAC - 8A 125VAC - 6.000 cycles
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
2.000 Vrms 50 Hz min. between terminals
CUT-OUT
• Panel cut-out : Ø 19,2 mm
(.755)
• Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
(AV9P & AV9B : 25 mm x 25 mm)
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 11 mm (.433) max.
• Operating temperature : -30°C to +70°C
• Low level or mechanical life : 1.000.000 cycles
• Hand soldering : 300°C, 3 sec. max.
• Packaging unit : 40 pieces
To order a product, select a basic model below and add the desired options.
BASIC MODEL
Hex nut 22 (.866) across flats
Flat actuator - short case - 48VDC - AV09100
ø19.00x1.00 SI
(.748DIAx1.00 IS)
7.30
(.287)
2.00
3.00
(.078)
(.118)
2.80
(.110)
Screw terminals
AV091003•9
Solder lug /
quick-connect term.
AV091003•2
13.50
(.531)
5.50
(.216)
5.00
(.196)
EPOXY
2
Screw terminals for wires 1,5 mm max.
Contacts : remplace • with A (silver) or C (silver plated brass).
Curved actuator - short case
With knurled nut for matrix mounting 25 x 25 - AV9P and AV9B
Ø22.00
Ø22.00
Ø22.00
25.00
25.00
(.984)
(.866DIA)
(.866DIA)
(.866DIA)
(.984)
Ø15.00
Ø15.00
Ø15.00
(.590DIA)
(.590DIA)
(.590DIA)
Screw terminals
Flat actuator, screw terminals Curved actuator, screw terminals
AV9P1003•9 AV9B1003•9
Flat actuator, solder lug term. Curved actuator, solder lug term.
AV9P1003•2 AV9B1003•2
AV191003•9
Solder lug / quick-connect terminals
AV191003•2
Wrench available
under P/N U1929
APEM
www.apem.com
B2-83
AV series
Security pushbutton switches Ø 19 mm (.748)
Momentary (NO)
Hex nut 22 (.866) across flats
Flat actuator - long case - 4A 250VAC/8A 125VAC - UL/CSA - AV09000
3.00
(.118)
Ø19.00x1.00 SI
(.748DIAx1.00 IS)
5.00
(.196)
Screw terminals
AV090003A9
To order switches marked UL-CSA, add
“UU” at the end of model number.
2.00
(.078)
14.80
(.582)
10.50
(.413)
2
Screw terminals for wires 1,5 mm max.
B2
Curved actuator - long case
With knurled nut for matrix mounting 25 x 25 - AV9P and AV9B
Ø22.00
Ø22.00
Ø22.00
25.00
(.984)
25.00
(.984)
(.866DIA)
(.866DIA)
(.866DIA)
Ø15.00
Ø15.00
Ø15.00
(.590DIA)
(.590DIA)
(.590DIA)
Wrench available
under P/N U1929.
Screw terminals
AV190003A9
Flat actuator, screw terminals Curved actuator, screw terminals
AV9P0003A9
AV9B0003A9
B2-84
www.apem.com
APEM
AV series
Security pushbutton switches Ø 19 mm (.748)
Options
Bush./actuator
After selecting basic model number,
fill in last 3 boxes
material
Marking
Sealing
with desired options.
BASIC MODEL
BUSHING/ACTUATOR MATERIALS
Flat or curved metal actuator
CODE
BUSHING
ACTUATOR
00 (standard)
Nickel plated brass
Nickel plated brass
Nickel plated brass
Chrome plated brass
Chrome plated brass
Stainless steel
Nickel plated brass
Stainless steel
Chrome plated brass
Chrome plated brass
Stainless steel
10
12
20
30
40
80
B2
Stainless steel
Varnished polished brass Varnished polished brass
Flat thermoplastic actuator
CODE
BUSHING
ACTUATOR COLOUR
0• (standard)
2•
8•
Nickel plated brass
Chrome plated brass
Varnished polished brass
Replace • with one of the following codes.
1 : blue - 1/4 : dark blue - 2 : black - 3 : green
4 : grey - 5 : yellow - 6 : red - 7/1: white
9 : orange
Select an option from each of the two tables below.
MARKING
- By engraving on flat or curved
brass actuator (stainless steel on
request)
TYPE OF MARKING
COLOUR OF MARKING
CODE
TYPE
CODE
COLOUR
- by hot stamping on flat
thermoplastic actuator
Brass actuator
0 to 9
X
Y
Numbers 0 to 9
Symbol
Symbol #
0 (standard) Same as finish
Black
*
2
Ø15.00
(0.590DIA)
A to N
P to W
0
Letters A to N
Letters P to W
Letter O
Note : a finished product supplied in
version “0” cannot be modified to
version "2".
1.50
(0.059)
Letter O : same code and same design as
number 0.
Thermoplastic actuator
2
7
Black
White
For special symbols, consult factory.
Minimum order : 500 pieces
SEALING
Blank
No sealing
2
1
❑ internal gasket
❑ external gasket
K
Frontal panel sealing (IP65)
APEM
www.apem.com
B2-85
AV series
Security pushbutton switches Ø 19 mm (.748)
Momentary (NC/NO)
ORDER FORMAT
Series
Bushing Bush./act. Actuator Bush./act. Contact/
diameter
config.
style
matl
terminals
AV
19
L
40
7
P
B
3
1
2
4
See below
Combined NC/NO
SPECIFICATIONS
MATERIALS
• Max. current/voltage rating with resistive load :
5A 250VAC - 5A 125VAC - 6.000 cycles
5A 15VDC - 3A 30VDC - 50.000 cycles
• Initial contact resistance : 100 mΩ max.
• Case : PA 6/6
• Contacts : silver
B2
• Bushing : stainless steel (std)
• Actuator : stainless steel (std)
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between term. and frame
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 9 mm (.354) max.
• Operating temperature : -20°C to +85°C
• Low level or mechanical life : 1.000.000 cycles
• Front panel sealing : IP65 and IP69K
CUT-OUT
• Panel cut-out : Ø 19,2 mm (.755)
• Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
• Packaging unit : 20 pieces
All model numbers below are for switches with standard bushing/actuator material.
BASIC MODEL
O-ring
Hex nut 22 (.866) across flats
❑
Solder lug terminals - AV19..407
2.00
(.078)
3.60
(.141)
Ø19.00X1.00 SI
(.748DIAX1.00 IS)
2.00
(.078)
Flat actuator
AV19LP407
Curved actuator
AV19LB407
13.10
(.515)
12.60
(.496)
3.60
(.141)
For non-standard material, replace 40 with one of the following codes.
BUSHING/ACTUATOR MATERIALS
CODE
BUSHING
ACTUATOR
00
20
Nickel plated brass
Chrome plated brass
Nickel plated brass
Chrome plated brass
B2-86
www.apem.com
APEM
AV series
Security pushbutton switches Ø 19 mm (.748)
With illuminated ring - momentary (NC/NO)
ORDER FORMAT
Options : see next page.
AV
9
2
Bushing dia. 19 mm
Contacts
LED resistor
Terminals
SERIES
2
Silver
0
1
2
4
No resistor supplied
12VDC resistor
24VDC resistor
48VDC resistor
2
Solder /
LED colour
quick-connect
Flying leads
Cable
0 : no LED - 1 : blue - V : green
F
C
5 : yellow - 6 : red - 7 : white - 9 : amber
NC/NO
SPECIFICATIONS
MATERIALS
• Travel : 2 mm 0,3 mm (.003)
• Case : polyamide, glass filled
• Contacts : silver
• Max. current/voltage rating with resistive load : 1A 30VDC
• LED voltage : 12VDC, 24VDC or 48VDC
B2
• Bushing : see next page
(If not supplied by APEM, a resistor must be series-connected by the user)**
• Initial contact resistance : 100 mΩ max.
•
Actuator : see next page
• Elastomeric membrane : silicone
• LED
• Insulation resistance : 10 MΩ min. at 500VDC
• Dielectric strength : 500 Vrms 50 Hz min. between terminals
1.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 250.000 cycles at full load
CUT-OUT
• Operating force : 5N 2N
• Panel cut-out : Ø 19,2 mm (.755)
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Low level or mechanical life : 1.000.000 cycles
• Operating temperature : -20°C to +55°C
•
Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
To order a product, select a basic
model below and add the desired LED
colour and voltage. Then select the
desired options on next page.
• Hand soldering : 350°C, 5 seconds max.
• Packaging unit : flying lead/cable models : 1 piece - other models : 40 pieces
supply voltage - LED forward voltage
LED forward current
** Resistor value =
Hex nut 22 (.866) across flats
Flat actuator - solder lug terminals
2.20
(.086)
3.00
(.118)
NC
NO
Illuminated (select LED colour above) *
AV9•022
+
-
Non-illuminated
AV90022
NC
NO
11.60
(.456)
12.10
(.476)
8.30
(.326)
22.00
(.866)
* No LED resistor supplied on this model.
Hex nut 22 (.866) across flats
Flat actuator - flying lead terminals
2.20
(.086)
3.00
(.118)
Ø15.00
(.590DIA)
Ø19.00x1.00 SI
(.748DIAx1.00 IS)
Illuminated (select LED colour & resistor
above)
AV9••2F
Non-illuminated
AV9002F
Ø12.00
(.472DIA)
11.60
(.456)
12.10
(.476)
200
(7.874)
Wire colours : black: NC, orange: NO, red: LED anode (+), blue : LED cathode (-)
APEM
www.apem.com
B2-87
AV series
Security pushbutton switches Ø 19 mm (.748)
With illuminated ring - momentary (NC/NO)
Hex nut 22 (.866) across flats
Flat actuator - cable terminals
2.20
(.086)
3.00
(.118)
Ø19.00x1.00 SI
(.748DIAx1.00 IS)
Illuminated (select colour & resistor)
AV9••2C
Non-illuminated
AV9002C
11.60
(.456)
12.10
(.476)
200
(7.874)
B2
Flying lead Flying lead/
Ring
Bushing /
After selecting basic model No.,
fill in last 5 boxes
protection cable length colour
plunger mat. Sealing
with desired options.
BASIC MODEL
FLYING LEAD PROTECTION
0
1
2
No protection and/or no flying leads
Heat-shrink sleeves
Tube + epoxy
FLYING LEAD/CABLE LENGTH
000
020
XXX
No flying leads / no cable
Length 20 cm (standard)
Length in centimeters
RING COLOURS
BUSHING/PLUNGER MATERIALS
CODE COLOUR
CODE COLOUR
CODE
BUSHING
ACTUATOR
1
2
3
4
5
Blue
6
7
8
9
Red
00
40
4A
4B
Brass, nickel plated Brass, nickel plated
Stainless steel 303 Stainless steel 303
Stainless steel 304 Stainless steel 304
Stainless steel 316 Stainless steel 316
Black *
Green
Grey *
Yellow
Opal white (std)
Translucent
Orange
Other : on request.
* non-illuminated only
SEALING
Blank
No sealing
2
1
❑
❑
internal membrane
external gasket
K
Front panel sealing (IP67)
B2-88
www.apem.com
APEM
AV series
Security pushbutton switches Ø 19 mm (.748)
Illuminated and non-illuminated - latching
ORDER FORMAT
AV
1
E
A
OPTIONS
LED colour
No LED
Blue
Green
Yellow
Red
Bush./act.
config.
Function
See next
page.
Actuator type
09 Flat
19 Curved
Illumin.
Terminals
SERISE
0
1
3
5
6
0
No
Illum.
2
4
8
Solder
PC
Quick-
connect
Contacts
L
SPECIFICATIONS
MATERIALS
• Max. current/voltage rating with resistive load : 2A 48 VDC
• Case : PA6T UL94-V0
• Contacts : silver
• Bushing and actuator : see
next page
• LED voltage and consumption : blue 3,5V 10mA, green : 2V 10mA
B2
yellow & red : 2V 20mA (a resistor must be series-connected by the user)**
• Initial contact resistance : 50 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 1 000 Vrms 50 Hz min. between terminals
500 Vrms 50 Hz min. between terminals and frame
• Electrical life : 500.000 cycles at 2A 48VDC
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 9 mm (.354) max.
• Operating temperature : -30°C to +70°C
• LED
CUT-OUT
• Panel cut-out : Ø 19,2 mm (.755)
• Min. pitch for matrix mounting :
30 mm x 30 mm (1.181 x 1.181)
• Low level or mechanical life : 1.000.000 cycles
• Hand soldering : 300°C, 4 seconds max.
To order a product, select a basic
model below and add the desired
options selected on next page.
• Packaging unit : 20 pieces
supply voltage - LED forward voltage
LED forward current
** Resistor value =
Standard actuator position : the actuator is flush in the non-latched position and recessed in the latched position.
Hex nut 22 (.866) across flats
Non-illuminated - solder lug terminals
Ø19.00x1.00 SI
(.748DIAx1.00 IS)
3.00
(.118)
3.60
(.141)
NC
2.00
(.078)
2.30
(.090)
Flat actuator *
AV09100EA2
ON
ON
-
-
ON
ON
Curved actuator
AV19100EA2
NO
NC
13.50
(.531)
2.80
(.110)
10.70
(.421)
* Also available with prominent actuator in the non-latched position
Hex nut 22 (.866) across flats
Illuminated - solder lug terminals
Ø19.00x1.00 SI
(.748DIAx1.00 IS)
3.00
(.118)
NC
2.00
(.078)
2.30
(.090)
Flat actuator
AV091L•EA2
ON
-
ON
NO
NC
13.50
(.531)
2.80
(.110)
10.70
(.421)
Replace • with desired LED colour.
APEM
www.apem.com
B2-89
AV series
Security pushbutton switches Ø 19 mm (.748)
Latching - Options
Straight PC terminals
Quick-connect terminals
1.20
(.047)
1.10
(.043)
2.80
(.110)
Replace 2 with 4 at the end of the model
numbers shown on previous page.
Replace 2 with 8 at the end of the model
numbers shown on previous page.
B2
Bushing/
After selecting basic model number,
fill in last 2 boxes
act. material
Sealing
with desired options.
BASIC MODEL
ATUATOR
BUSHING/ACTUATOR MATERIALS
CODE
BUSHING
00 (std)
10
Nickel plated brass
Nickel plated brass
Stainless steel
Nickel plated brass
Stainless steel
40
Stainless steel
50
Stainless steel
Nickel plated brass
SEALING
Blank
No sealing
2
1
❑ elastomeric membrane
❑ external gasket
K
Frontal panel sealing (IP65)
B2-90
www.apem.com
APEM
AV series
Snap-action security pushbutton switches Ø 19 mm (.748)
Illuminated and non-illuminated - momentary (NO)
ORDER FORMAT
AV
C7
3
D
OPTIONS
See next
page
Case
Function
Actuator type
09 Flat
19 Curved
Illumin.
No
Illum.
Terminals
Solder
Screw
SERIES
0
L
2
9
Contact
NO
(function 3)
SPECIFICATIONS
MATERIALS
• Travel : 0,7 mm (.027) 0,1 mm (.003)
• Case : PBT UL94-V0
• Max. current/voltage rating with resistive load : 50mA 24VDC
• LED voltage and consumption : 2-colour LED : 2V (3V max.) 20mA
Other colours : 2V (3V max.) 10mA
• Terminals : brass, gold plated
• Contacts : gold plated dome
• Bushing and actuator : see next page
• LED
B2
A resistor must be series-connected by the user **
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 500 Vrms 50 Hz min. between terminals
2.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 1.000.000 cycles at full load
• Operating force : 7 N - 2 N
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -30°C to +70°C
• Hand soldering : 270°C, 3 seconds max.
• Packaging unit : 40 pieces
CUT-OUT
• Panel cut-out : Ø 19,2 mm
(.755)
Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
•
To order a product, select a basic
model below and add the desired
options selected on next page.
supply voltage - LED forward voltage
LED forward current
** Resistor value =
Hex nut 22 (.866) across flats
Flat actuator - non-illuminated
Ø19.00x1.00 SI
(.748DIAx1.00 IS)
2.00
2.00
3.00
(.078)
(.078)
(.118)
1.90
(.074)
Solder lug terminals
AV09C703D2
Screw terminals
AV09C703D9
EPOXY
4.15
(.163)
3.90
(.153)
13.50
(.531)
13.50
(.531)
13.20
(.519)
Also available with curved actuator :
AV19C703D2 or AV19C703D9
Hex nut 22 (.866) across flats
Flat actuator - illuminated
Ø19.00x1.00 SI
(.748DIAx1.00 IS)
2.00
(.078)
2.00
(.078)
3.00
(.118)
1.90
(.074)
Solder lug terminals
AV09C7L3D2
Screw terminals
AV09C7L3D9
+
-
EPOXY
4.15
(.163)
3.90
(.153)
13.50
(.531)
13.50
(.531)
13.20
(.519)
APEM
www.apem.com
B2-91
AV series
Snap-action security pushbutton switches Ø 19 mm (.748)
Options
Bushing/act.
material
LED
After selecting basic model no.,
fill in last 4 boxes
colour
Marking
Sealing
with desired options.
BASIC MODEL
BUSHING/ACTUATOR MATERIALS
Non-illuminated models
Illuminated models
CODE
BUSHING
ACTUATOR
CODE
BUSHING
ACTUATOR
00 (std) Nickel plated brass
Nickel plated brass
Stainless steel
Stainless steel
00 (std) Nickel plated brass
Nickel plated brass
Chrome plated brass
Stainless steel
10
30
40
80
Nickel plated brass
Chrome plated brass
Stainless steel
20
40
50
80
Chrome plated brass
Stainless steel
Stainless steel
B2
Stainless steel
Nickel plated brass
Varnished polished brass Varnished polished brass
Varnished polished brass Varnished polished brass
LED COLOURS
Blank No LED
1: Blue - 3 : Green - 5 : Yellow - 6 : Red - 7 : White - 9 : Amber - 2 : Red/green
Select an option from each of the two tables below.
MARKING
For flat or curved actuator.
TYPE OF MARKING
COLOUR OF MARKING
- by engraving on non-illuminated
brass actuator (stainless steel on
request).
- by hot stamping on thermoplastic
insert (illuminated actuators)
CODE
TYPE
CODE
COLOUR
Non-illuminated actuators
0 to 9
X
Y
Numbers 0 to 9
Symbol
Symbol #
0 (standard) Same as finish
2
*
Black
A to N
P to W
0
Letters A to N
Letters P to W
Letter O
Note : a finished product supplied in
version “0” cannot be modified to
version "2".
Ø10.00
(0.393DIA)
Letter O : same code and same design as
number 0.
Illuminated actuators
2
Black (on white)
1.50
1.00
For special symbols, consult factory.
Minimum order : 500 pieces
(0.059)
(0.039)
SEALING
Blank
No sealing
2
1
❑
❑
internal gasket
external gasket
K
Front panel sealing (IP65)
B2-92
www.apem.com
APEM
AV series
Snap-action security pushbuttons Ø 19 mm (.748) with overmolded actuator
Illuminated and non-illuminated - momentary (NO)
ORDER FORMAT
AV
9
D
OPTIONS
Bush./act.
configuration
Contacts
See next
page
Illumination
S0 No
SL Illum.
Terminals
Solder
Screw
SERIES
2
9
NO
(function 3)
SPECIFICATIONS
MATERIALS
• Travel : 0,7 mm (.027) 0,1 mm (.003)
• Case : PBT UL94-V0
• Max. current/voltage rating with resistive load : 50mA 24VDC
• LED voltage and consumption : 2-colour LED : 2V (3V max.) 20mA
Other colours : 2V (3V max.) 10mA
• Terminals : brass, gold plated
• Contacts : gold plated dome
• Bushing : see next page
B2
(a resistor must be series-connected by the user)**
• Initial contact resistance : 100 mΩ max.
•
Actuator : stainless steel, with
thermoplastic overmolding
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 500 Vrms 50 Hz min. between terminals
2.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 1.000.000 cycles at full load
• Operating force : 7 N 2N
• LED
CUT-OUT
• Panel cut-out : Ø 19,2 mm (.755)
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -30°C to +70°C
•
Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
• Hand soldering : 270°C, 3 sec. max.
• Packaging unit : 16 pieces
To order a product, select a basic
model below and add the desired
options selected on next page.
supply voltage - LED forward voltage
LED forward current
** Resistor value =
Hex nut 22 (.866) across flats
Flat actuator - solder lug terminals
3.00
(.118)
2.00
2.00
(.078)
(.078)
1.90
(.074)
Illuminated
AV9SLD2
Non-illuminated
AV9S0D2
EPOXY
4.15
(.163)
4.30
(.169)
9.80
(.385)
Also available with bushing Ø 22 (.866) : on request.
Hex nut 22 (.866) across flats
Flat actuator - screw terminals
3.00
(.118)
2.00
2.00
(.078)
(.078)
9.00
(.354)
Illuminated
AV9SLD9
Non-illuminated
AV9S0D9
4.30
(.169)
9.80
(.385)
Also available with bushing Ø 22 (.866) : on request.
APEM
www.apem.com
B2-93
AV series
Snap-action security pushbuttons Ø 19 mm (.748) with overmolded actuator
Options
Bushing
material
Over-
LED
Actuator
type
After selecting basic model no.,
fill in last 5 boxes
molding
colour
Sealing
with desired options.
BASIC MODEL
BUSHING MATERIALS
OVERMOLDING COLOURS
LED COLOURS
CODE
MATERIAL
CODE COLOUR
CODE COLOUR
CODE
COLOUR
0 (std)
Nickel plated brass
Chrome plated brass
Stainless steel
1
2
3
4
5
Blue
6
7
8
9
Red
White
Translucent
Orange
Blank
1
2
3 **
V **
5
6
7
No LED
Blue
Red/green
Green
Green, high intensity
Yellow
Red
2
4
5
6
7
8
9
Black *
Green
Grey *
Yellow
Gold plated brass
Chrome plated brass, satin
Chrome pl. brass, matt black
Varnished polished brass
Polished brass
B2
* non-illuminated only
White
Amber
9
** To order a green LED for actuator style 002, always use code V.
Other actuator styles can be ordered with LED code 3 or V.
ACTUATOR STYLES
The ring and symbols are obtained by photochemical engraving of a stainless steel insert.
The insert is then overmolded in the desired colour.
The following actuator styles are available. For other types, consult factory.
CODE
001
002
003
004
005
Illuminated
ring and disc
Illuminated
ring
Loudspeaker
OFF
DESCRIPTION
Arrow
Opening
RING/SYMBOL
CODE
006
008
009
010
011
DESCRIPTION
Validation
Closing
Standby
Cancel
Power
SYMBOL
SEALING
Blank
No sealing
Recommended panel mounting for IP69K
2
1
❑
❑
internal membrane
external gasket
K
Front panel sealing (IP67)
K
Front panel sealing (IP69K)
B2-94
www.apem.com
APEM
AV series
Snap-action security pushbuttons Ø 22 mm (.866) with overmolded actuator
Illuminated and non-illuminated - momentary (NO)
ORDER FORMAT
AV
3
D
OPTIONS
Bush./act.
configuration
Contacts
See next
page
Illumination
S0 No
SL Illum.
Terminals
Solder
Screw
SERIES
2
9
NO
(function 3)
SPECIFICATIONS
MATERIALS
• Travel : 0,7 mm (.027) 0,1 mm (.003)
• Case : PBT UL94-V0
• Max. current/voltage rating with resistive load : 50mA 24VDC
• LED voltage and consumption : 2-colour LED : 2V (3V max.) 20mA
Other colours : 2V (3V max.) 10mA
• Terminals : brass, gold plated
• Contacts : gold plated dome
• Bushing : see next page
B2
(a resistor must be series-connected by the user)**
• Initial contact resistance : 100 mΩ max.
•
Actuator : stainless steel, with
thermoplastic overmolding
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 500 Vrms 50 Hz min. between terminals
2.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 1.000.000 cycles at full load
• Operating force : 7 N 2N
• LED
CUT-OUT
• Panel cut-out : Ø 22,2 mm (.874)
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -30°C to +70°C
•
Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
• Hand soldering : 270°C, 3 sec. max.
• Packaging unit : 16 pieces
To order a product, select a basic
model below and add the desired
options selected on next page.
supply voltage - LED forward voltage
LED forward current
** Resistor value =
Hex nut 25 (.984) across flats
Flat actuator - solder lug terminals
2.00
(.078)
4.00
(.157)
2.00
(.078)
1.90
(.074)
Illuminated
AV3SLD2
Non-illuminated
AV3S0D2
EPOXY
4.15
(.163)
4.80
(.188)
9.30
(.366)
Hex nut 25 (.984) across flats
Flat actuator - screw terminals
2.00
(.078)
4.00
(.157)
2.00
(.078)
9.00
(.354)
Illuminated
AV3SLD9
Non-illuminated
AV3S0D9
4.80
(.188)
9.30
(.366)
APEM
www.apem.com
B2-95
AV series
Snap-action security pushbuttons Ø 22 mm (.866) with overmolded actuator
Options
Bushing
material
Over-
LED
Actuator
type
After selecting basic model no.,
fill in last 5 boxes
molding
colour
Sealing
with desired options.
BASIC MODEL
BUSHING MATERIALS
OVERMOLDING COLOURS
LED COLOURS
CODE
MATERIAL
CODE COLOUR
CODE COLOUR
CODE
COLOUR
0 (std)
Nickel plated brass
Chrome plated brass
Stainless steel
1
2
3
4
5
Blue
6
7
8
9
Red
White
Translucent
Orange
Blank
1
2
3 **
V **
5
6
7
No LED
Blue
Red/green
Green
Green, high intensity
Yellow
Red
2
4
5
6
7
8
9
Black *
Green
Grey *
Yellow
Gold plated brass
Chrome plated brass, satin
Chrome pl. brass, matt black
Varnished polished brass
Polished brass
B2
* non-illuminated only
White
Amber
9
** To order a green LED for actuator style 002, always use code V.
Other actuator styles can be ordered with LED code 3 or V.
ACTUATOR STYLES
The ring and symbols are obtained by photochemical engraving of a stainless steel insert.
The insert is then overmolded in the desired colour.
The following actuator styles are available. For other types, consult factory.
CODE
001
002
003
004
005
Illuminated
ring and disc
Illuminated
ring
Loudspeaker
OFF
Arrow
Opening
DESCRIPTION
RING/SYMBOL
CODE
006
008
009
010
011
Validation
Closing
Standby
Cancel
Power
DESCRIPTION
SYMBOL
SEALING
Blank
No sealing
Recommended panel mounting for IP69K
2
1
➀
➀
internal membrane
external gasket
K
Front panel sealing (IP67)
K
Front panel sealing (IP69K)
B2-96
www.apem.com
APEM
AV series
Security pushbutton switches Ø 22 mm (.866)
Momentary (NO)
ORDER FORMAT
AV
3
OPTIONS
See “Options”
page.
Bushing/act. configuration
03 Flat actuator
02 Curved actuator
M2 Curved act.+flatted bush.
M3 Flat act.+flatted bush.
Case
000 Long
100 Short
Function
Contacts
Terminals
SERIES
3
NO
A
C
Silver
9
2
Screw
Quick-
connect
Brass,
NO
silver pl.
(function 3)
SPECIFICATIONS
MATERIALS
• Max. current/voltage rating with resistive load :
- A contacts : 4A 12VDC, 500.000 cycles
- C contacts : 2A 48 VDC, 10.000 cycles
• Case : PBT
• Contacts : silver (A) or
brass, silver plated (C)
B2
• Approved ratings of models with long case and A contacts (AV..000) :
UL-CSA : 4A 250VAC - 8A 125VAC - 6.000 cycles
• Initial contact resistance : 10 mΩ max.
• Bushing and actuator : see
“Options” page
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
2.000 Vrms 50 Hz min. between terminals
CUT-OUTS
• Panel cut-out : Ø 22,2 mm
(.874)
• Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 11 mm (.433) max.
• Operating temperature : -30°C to +70°C
• Low level or mechanical life : 1.000.000 cycles
• Hand soldering : 300°C, 3 sec. max.
• Packaging unit : 20 pieces
To order a product, select a basic model below or on next page and add the desired options.
BASIC MODEL
Hex nut 25 (.984) across flats
Flat actuator - short case - 48VDC - AV03100
ø22.00x1.00 SI
(.866DIAx1.00 IS)
7.30
2.00
3.00
(.287)
(.078)
(.118)
2.80
(.110)
Screw terminals
AV031003•9
Solder lug /
quick-connect term.
AV031003•2
EPOXY
12.70
(.500)
6.30
(.248)
5.00
(.196)
2
Screw terminals for wires 1,5 mm max.
Contacts : remplace • with A (silver) or C (silver plated brass).
Curved actuator - short case
Flatted bushing - short case - AVM3 and AVM2
Ø25.00
Ø15.00
Ø25.00
(.984DIA)
(.590DIA)
(.984DIA)
Ø15.00
(.590DIA)
Ø22.20
(.874DIA)
Screw terminals
Flat actuator, screw terminals
AVM31003•9
Curved actuator, screw terminals
AVM21003•9
10.00
(.393
)
AV021003•9
Solder lug / quick-connect terminals
AV021003•2
APEM
www.apem.com
B2-97
AV series
Security pushbutton switches Ø 22 mm (.866)
Momentary (NO) - momentary (NC) - alternate action
Hex nut 25 (.984) across flats
Flat actuator - long case - 4A 250VAC/8A 125VAC - UL/CSA - AV03000
Ø22.00x1.00 SI
(.866DIAx1.00 IS)
2.00
3.00
(.078)
(.118)
Screw terminals
AV030003A9
To order switches marked UL-CSA, add
“UU” at the end of model number.
15.00
(.590)
10.00
(.248)
5.00
(.196)
2
Screw terminals for wires 1,5 mm max.
B2
Curved actuator - long case
Flatted bushing - long case - AVM3 and AVM2
Ø25.00
Ø15.00
Ø25.00
(.984DIA)
(.590DIA)
(.984DIA)
Ø15.00
(.590DIA)
Ø22.20
(.874DIA)
Flat actuator, screw terminals
AVM30003•9
Curved actuator, screw terminals
AVM20003•9
10.00
(.393
Screw terminals
AV020003A9
)
MOMENTARY NORMALLY CLOSED MODEL (NC)
Bushing Ø 22 (.866) - AV..1200
Hex nut 25 (.984) across flats
Ø22.00x1.00 SI
(.866DIAx1.00 IS)
• Single pole, screw terminals, without marking
Ø3.00x0.50
(.118DIAx.0.50)
• Silver plated copper contacts (C)
2.00
(.078)
3.00
(.118)
• Max. current/voltage rating with resistive load :
2A 250VAC - 3A 125VAC - 2,5A 24VDC
• Dielectric strength :
2.000 Vrms 50 Hz min. betw. term. and frame
2.000 Vrms. 50 Hz min. between terminals
• Electrical life : 100.000 cycles at 0,3A 24VAC or DC
10.000 cycles at full load
• Packaging unit : 20 pieces
3.60
(.141)
14.00
(.551)
7.00
(.275)
15.40
(.606)
Flat actuator
AV031202C900
Curved actuator
AV021202C900
Hex nut 25 (.984) across flats
Bushing Ø 22 (.866) - alternate action - AV..4700
Ø22.00x1.00 SI
(.866DIAx1.00 IS)
• Double pole, solder lug/quick-connect term., curved actuator
3.00
(.118)
1.60
(.063)
• Silver contacts
• Max. current/voltage rating with resistive load :
3(1,5)A 250VAC - 6A 125VAC - 3A 24VAC or DC
• Dielectric strength :
3.000 Vrms min. between terminals and frame
• Electrical life : 10.000 cycles at full load
50.000 cycles at 1A 24VAC or DC
• Mechanical life : 100.000 cycles
• Packaging unit : 10 pieces
3.60
(.141)
20.60
(.811)
7.20
(.283)
14.00
(.551)
AV044746A200
ON
-
ON
Further specifications : see previous page. Bushing/actuator materials, marking and sealing : see ”options” on next page.
B2-98
www.apem.com
APEM
AV series
Security pushbutton switches Ø 22 mm (.866)
Options
Bush./actuator
After selecting basic model number,
fill in last 3 boxes
material
Marking
Sealing
with desired options.
BASIC MODEL
BUSHING/ACTUATOR MATERIALS
Flat or curved metal actuator
CODE
BUSHING
ACTUATOR
00 (standard)
10
12
20
30
40
Nickel plated brass
Nickel plated brass
Nickel plated brass
Chrome plated brass
Chrome plated brass
Stainless steel
Nickel plated brass
Stainless steel
Chrome plated brass
Chrome plated brass
Stainless steel
B2
Stainless steel
80 **
Varnished polished brass Varnished polished brass
Flat thermoplastic actuator
CODE
BUSHING
ACTUATOR COLOUR
0• (standard)
2•
8•
Nickel plated brass
Chrome plated brass
Varnished polished brass
Replace • with one of the following codes.
1 : blue - 1/4 : dark blue - 2 : black - 3 : green
4 : grey - 5 : yellow - 6 : red - 7/1: white
9 : orange
Select an option from each of the two tables below.
MARKING
- By engraving on flat or curved
brass actuator (stainless steel on
request)
TYPE OF MARKING
COLOUR OF MARKING
CODE
TYPE
CODE
COLOUR
- by hot stamping on flat
thermoplastic actuator
0 to 9
X
Y
Numbers 0 to 9
Symbol
Symbol #
Brass actuator
0 (standard) Same as finish
2 Black
*
Ø15.00
(0.590DIA)
A to N
P to W
0
Letters A to N
Letters P to W
Letter O
Note : a finished product supplied in
version “0” cannot be modified to
version "2".
1.50
(0.059)
Letter O : same code and same design as
number 0.
Thermoplastic actuator
2
7
Black
White
For special symbols, consult factory.
Minimum order : 500 pieces
SEALING
Blank
No sealing
2
1
➀ internal gasket
➀ external gasket
K
Frontal panel sealing (IP65)
APEM
www.apem.com
B2-99
AV series
Security pushbutton switches Ø 22 mm (.866)
With illuminated ring - momentary (NC/NO)
ORDER FORMAT
Options : see next page.
AV
3
2
Bushing dia. 22 mm
Contacts
LED resistor
Terminals
SERIES
2
Silver
0
1
2
4
No resistor supplied
12VDC resistor
24VDC resistor
48VDC resistor
2
Solder /
LED colour
quick-connect
Flying leads
Cable
0 : no LED - 1 : blue - V : green
F
C
5 : yellow - 6 : red - 7 : white - 9 : amber
NC/NO
SPECIFICATIONS
MATERIALS
• Travel : 2 mm 0,3 mm (.003)
• Case : polyamide, glass filled
• Contacts : silver
• Max. current/voltage rating with resistive load : 1A 30VDC
• LED voltage : 12VDC, 24VDC or 48VDC
B2
• Bushing : see next page
(If not supplied by APEM, a resistor must be series-connected by the user)**
• Initial contact resistance : 100 mΩ max.
•
Actuator : see next page
• Elastomeric membrane : silicone
• LED
• Insulation resistance : 10 MΩ min. at 500VDC
• Dielectric strength : 500 Vrms 50 Hz min. between terminals
1.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 250.000 cycles at full load
CUT-OUT
• Operating force : 5N 2N
• Panel cut-out : Ø 22,2 mm (.874)
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Low level or mechanical life : 1.000.000 cycles
• Operating temperature : -20°C to +55°C
•
Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
To order a product, select a basic
model below and add the desired LED
colour and voltage. Then select the
desired options on next page.
• Hand soldering : 350°C, 5 seconds max.
• Packaging unit : flying lead/cable models : 1 piece - other models : 40 pieces
supply voltage - LED forward voltage
LED forward current
** Resistor value =
Hex nut 25 (.984) across flats
Flat actuator - solder lug terminals
4.00
(.157)
2.20
(.086)
NO
NC
Illuminated (select LED colour above) *
AV3•022
+
-
Non-illuminated
AV30022
NO
NC
11.60
(.456)
12.10
(.476)
8.30
(.326)
25.00
(.984)
* No LED resistor supplied on this model.
Hex nut 25 (.984) across flats
Flat actuator - flying lead terminals
4.00
(.157)
2.20
(.086)
Ø22.00x1.00 SI
(.866DIAx1.00 IS)
Ø15.00
(.590DIA)
Illuminated (select LED colour & resistor
above)
AV3••2F
Non-illuminated
AV3002F
Ø12.00
11.60
(.456)
12.10
(.476)
200
(7.874)
(.472DIA)
Wire colours : black: NC, orange: NO, red: LED anode (+), blue : LED cathode (-)
B2-100
www.apem.com
APEM
AV series
Security pushbutton switches Ø 22 mm (.866)
With illuminated ring - momentary changeover (NC/NO)
Hex nut 25 (.984) across flats
Flat actuator - cable terminals
4.00
2.20
Ø22.00x1.00 SI
(.157)
(.086)
(.866DIAx1.00 IS)
Illuminated (select colour & resistor)
AV3••2C
Non-illuminated
AV3002C
11.60
(.456)
12.10
(.476)
200
(7.874)
B2
Flying lead Flying lead/
Ring
Bushing /
After selecting basic model No.,
protection cable length colour
plunger mat. Sealing
fill in last 5 boxes
with desired options.
BASIC MODEL
FLYING LEAD PROTECTION
0
1
2
No protection and/or no flying leads
Heat-shrink sleeves
Tube + epoxy
WIRE/CABLE LENGTH
000
020
XXX
No flying leads / no cable
Length 20 cm (7.874) - standard
Length in centimeters
RING COLOURS
BUSHING/PLUNGER MATERIALS
CODE COLOUR
CODE COLOUR
CODE
BUSHING
ACTUATOR
1
2
3
4
5
Blue
6
7
8
9
Red
00
40
4A
4B
Brass, nickel plated Brass, nickel plated
Stainless steel 303 Stainless steel 303
Stainless steel 304 Stainless steel 304
Stainless steel 316 Stainless steel 316
Black *
Green
Grey *
Yellow
Opal white (std)
Translucent
Orange
Other : on request.
* non-illuminated only
SEALING
Blank
No sealing
2
1
➀
➀
internal membrane
external gasket
K
Front panel sealing (IP67)
APEM
www.apem.com
B2-101
AV series
Security pushbutton switches Ø 22 mm (.866)
Illuminated and non-illuminated - latching
ORDER FORMAT
AV
1
E
A
OPTIONS
LED colour
No LED
Blue
Green
Yellow
Red
Bush./act.
config.
Function
See next
page.
Actuator type
03 Flat
02 Curved
Illumin.
Terminals
SERIES
0
1
3
5
6
0
No
Illum.
2
4
8
Solder
PC
Quick-
connect
Contacts
L
SPECIFICATIONS
MATERIALS
• Max. current/voltage rating with resistive load : 2A 48 VDC
• Case : PA6T UL94-V0
• Contacts : silver
• LED voltage and consumption : blue 3,5V 10mA, green : 2V 10mA
B2
yellow & red : 2V 20mA (a resistor must be series-connected by the user)**
• Initial contact resistance : 50 mΩ max.
• Actuator and bushing : see
next page
• LED
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 1 000 Vrms 50 Hz min. between terminals
500 Vrms 50 Hz min. between terminals and frame
• Electrical life : 500.000 cycles at 2A 48VDC
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 9 mm (.354) max.
• Operating temperature : -30°C to +70°C
CUT-OUT
• Panel cut-out : Ø 22,2 mm (.874)
• Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
• Low level or mechanical life : 1.000.000 cycles
• Hand soldering : 300°C, 4 seconds max.
To order a product, select a basic
model below and add the desired
options selected on next page.
• Packaging unit : 20 pieces
supply voltage - LED forward voltage
LED forward current
** Resistor value =
Standard actuator position : the actuator is flush in the non-latched position and recessed in the latched position.
Hex nut 25 (.984) across flats
Non-illuminated - solder lug terminals
Ø22.00x1.00 SI
(.866DIAx1.00 IS)
3.00
(.118)
NC
3.80
2.00
(.078)
(.149)
2.30
(.090)
Flat actuator *
AV03100EA2
ON
ON
-
-
ON
ON
Curved actuator
AV02100EA2
NO
NC
12.70
(.500)
2.80
(.110)
11.50
(.045)
* Also available with prominent actuator in the non-latched position
Hex nut 25 (.984) across flats
Illuminated - solder lug terminals
Ø22.00x1.00 SI
3.00
(.118)
(.866DIAx1.00 IS)
NC
2.00
(.078)
2.30
(.090)
Flat actuator
AV031L•EA2
ON
-
ON
NO
NC
12.70
(.500)
2.80
(.110)
11.50
(.045)
Replace • with desired LED colour.
B2-102
www.apem.com
APEM
AV series
Security pushbutton switches Ø 22 mm (.866)
Illuminated and non-illuminated - latching
Straight PC terminals
Quick-connect terminals
1.20
(.047)
1.10
(.043)
2.80
(.110)
Replace 2 with 4 at the end of the model
numbers shown on previous page.
Replace 2 with 8 at the end of the model
numbers shown on previous page.
B2
Bushing/
After selecting basic model number,
fill in last 2 boxes
act. material
Sealing
with desired options.
BASIC MODEL
BUSHING/ACTUATOR MATERIALS
CODE
BUSHING
ACTUATOR
00 (std)
10
Nickel plated brass
Nickel plated brass
Stainless steel
Nickel plated brass
Stainless steel
40
Stainless steel
50
Stainless steel
Nickel plated brass
SEALING
Blank
No sealing
2
1
➀ elastomeric membrane
➀ external gasket
K
Frontal panel sealing (IP65)
APEM
www.apem.com
B2-103
AV series
Security pushbutton switches Ø 22 mm (.866) or 24 mm (.944) with large actuator
Momentary (combined NC+NO)
ORDER FORMAT
AV
L
OPTIONS
Bushing
Bush./act.
config.
Act. style
Bush./actuator
material
See next page
Terminals
SERIES
diameter
P
B
C
Flat
Curved
Recessed
4
2
Quick-
connect
Solder lug
22 22 mm
24 24 mm
Combined NC+NO
SPECIFICATIONS
MATERIALS
• Max. current/voltage rating with resistive load : 5A 250VAC
• Initial contact resistance : 100 mΩ max.
• Case : polyester, glass filled
• Contacts : silver/nickel alloy
• Bushing and actuator :
see next page.
B2
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 1.000.000 cycles at 1A 250VAC
100.000 cycles at full load
CUT-OUT
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -20°C to +55°C
• Panel cut-out : Ø 22,2 mm
(.874) or Ø 24,2 mm (.952)
• Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
or 33 mm x 33 mm (1.299x1.299)
• Low level or mechanical life : 3.000.000 cycles
• Front panel sealing : IP65
• Hand soldering : 300°C, 5 sec. max.
• Packaging unit : 20 pieces (except black chrome plated : 16 pieces)
To order a product, select a basic model below or on next page and add the desired bushing/actuator materials.
BASIC MODEL
O-ring
Hex nut 25 (.984) across flats
➀
Flat actuator - AV22LP
3.60
4.00
(.141)
(.157)
2.80X0.50
Quick-connect terminals
AV22LP••4
(.110X.019)
Solder lug terminals
AV22LP••2
2.40
(.250)
3.00
12.50
(.492)
12.80
(.503)
(.118)
Curved actuator - AV22LB
Recessed actuator - AV22LC
Quick-connect terminals
AV22LB••4
Solder lug terminals
AV22LB••2
Quick-connect terminals
AV22LC••4
Solder lug terminals
AV22LC••2
B2-104
www.apem.com
APEM
AV series
Security pushbutton switches Ø 22 mm (.866) or 24 mm (.944) with large actuator
Momentary (combined NC+NO)
BASIC MODEL
O-ring
Hex nut 27 (1.062) across flats
➀
Flat actuator - low profile - AV24LP
4.00
(.157)
3.60
(.141)
2.80X0.50
(.110X.019)
Quick-connect terminals
AV24LP••4
Solder lug terminals
AV24LP••2
2.40
(.250)
1.30
14.20
(.559)
13.00
(.511)
B2
(.051)
Curved actuator - AV24LB
Recessed actuator - AV24LC
Quick-connect terminals
AV24LB••4
Solder lug terminals
AV24LB••2
Quick-connect terminals
AV24LC••4
Solder lug terminals
AV24LC••2
BUSHING/ACTUATOR MATERIALS
Models with non-anodized actuator
CODE
BUSHING
ACTUATOR
40 (standard) Stainless steel
Stainless steel
Chrome plated brass
20
Chrome plated brass
Models with anodized actuator
CODE
BUSHING
ACTUATOR COLOUR
1•
2•
4•
Black chrome plated brass
Chrome plated brass
Stainless steel
Replace • with one of the following codes :
1 : blue - 2 : black - 3 : pale green - 3F : dark green - 4 : natural - 5 : gold yellow
6 : red - 6B : maroon
APEM
www.apem.com
B2-105
AV series
Mushroom head security pushbutton switches Ø 22 mm (.866)
Momentary (combined NC+NO)
ORDER FORMAT
AV
22
PNA
OPTIONS
Bushing
diameter
Bush./act.
config.
Actuator colour
See below
Terminals
SERIES
4
2
Quick-
connect
Solder lug
Combined NC+NO
SPECIFICATIONS
MATERIALS
• Max. current/voltage rating with resistive load : 5A 250VAC
• Initial contact resistance : 100 mΩ max.
• Case : polyester, glass filled
• Contacts : silver/nickel alloy
• Bushing : brass, nickel plated
B2
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 1.000.000 cycles at 1A 250VAC
50.000 cycles at full load
•
Actuator : aluminium, anodized
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -20°C to +55°C
• Low level or mechanical life : 1.000.000 cycles
• Front panel sealing : IP65
CUT-OUT
• Panel cut-out : Ø 22,2 mm
(.874)
• Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
• Hand soldering : 300°C, 5 sec. max.
• Packaging unit : 16 pieces
To order a product, select a basic model below and add the desired actuator colour.
BASIC MODEL
O-ring
Hex nut 25 (.984) across flats
➀
Mushroom head actuator - AV22PNA
4.00
(.157)
3.60
(.141)
2.80X0.50
(.110X.019)
Quick-connect terminals
AV22PNA•4
Solder lug terminals
AV22PNA•2
2.40
(.250)
10.80
(.425)
8.60
(.338)
12.80
(.503)
ACTUATOR ANODIZATION COLOURS
1 : blue - 2 : black - 3 : pale green - 3F : dark green - 4 : natural - 5 : gold yellow - 6 : red - 6B : maroon
B2-106
www.apem.com
APEM
相关型号：
AV0A526-U3
Card Edge Connector, 162 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal
FOXCONN
AV0A526-U4
Card Edge Connector, 162 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal,
FOXCONN
©2020 ICPDF网 联系我们和版权申明