54ACTQ241FMQB [ETC]
BUFFER/DRIVER|DUAL|4-BIT|ACT-CMOS|FP|20PIN|CERAMIC ;型号: | 54ACTQ241FMQB |
厂家: | ETC |
描述: | BUFFER/DRIVER|DUAL|4-BIT|ACT-CMOS|FP|20PIN|CERAMIC 驱动 |
文件: | 总7页 (文件大小:21K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MICROCIRCUIT DATA SHEET
Original Creation Date: 07/15/96
Last Update Date: 03/09/99
MN54ACTQ241-X REV 2A0
Last Major Revision Date: 12/17/98
Octal Buffer/Line Driver with TRI-STATE Outputs
General Description
The ACTQ241 is an octal buffer and line driver designed to be employed as a memory address
driver, clock driver and bus oriented transmitter or receiver which provides improved PC
board density. The ACTQ utilzes NSC Quiet Series technology to guarantee quiet output
switching and improved dynamic threshold performance. FACT Quiet Series TM features GTO
TM output control and undershoot corrector in addition to a split ground bus for superior
performance.
Industry Part Number
NS Part Numbers
54ACTQ241
54ACTQ241DMQB*
54ACTQ241FMQB**
54ACTQ241LMQB***
Prime Die
D241
Controlling Document
5962-92185
Processing
Subgrp Description
Temp (oC)
MIL-STD-883, Method 5004
1
Static tests at
+25 C
+125 C
-55 C
+25 C
+125 C
-55 C
+25 C
+125 C
-55 C
+25 C
+125 C
-55 C
2
Static tests at
3
Static tests at
4
Dynamic tests at
Dynamic tests at
Dynamic tests at
Functional tests at
Functional tests at
Functional tests at
Switching tests at
Switching tests at
Switching tests at
Quality Conformance Inspection
5
6
MIL-STD-883 5005
7
8A
8B
9
10
11
1
MICROCIRCUIT DATA SHEET
MN54ACTQ241-X REV 2A0
Features
- Icc and Ioz reduced by 50%
- Guaranteed simultaneous switching noise level and dynamic threshold performance
- Improved latch-up immunity
- TRI-STATE Output drive bus lines or buffer memory address registers
- Outputs source/sink 24 mA
- 4 kV minimum ESD immunity (ACTQ)
- Guaranteed pin-to-pin skew AC performance
- Standard Military Drawing (SMD)
- ACTQ241: 5962-9218501MRX*, MSX**, M2X***
2
MICROCIRCUIT DATA SHEET
MN54ACTQ241-X REV 2A0
(Absolute Maximum Ratings)
(Note 1)
Supply Voltage (Vcc)
-0.5V to +7.0V
DC Input Diode Current (Iik)
Vi = -0.5V
-20 mA
+20 mA
Vi = Vcc +0.5V
DC Input Voltage (Vi)
-0.5V to Vcc +0.5V
DC Output Diode Current (Iok)
Vo = -0.5V
-20 mA
+20 mA
Vo = Vcc +0.5V
DC Output Voltage (Vo)
-0.5V to Vcc +0.5V
+50 mA
DC Output Source or Sink Current (Io)
DC Vcc or Ground Current per Output Pin (Icc or Ignd)
DC Latch-Up Source or Sink Current
+50 mA
+300 mA
Junction Temperature (Tj)
CDIP
175 C
Storage Temperature (Tstg)
-65 C to +150 C
Note 1: Absolute maximum ratings are those values beyond which damage to the device may
occur. The databook specifications should be met, without exception, to ensure that
the system design is reliable over its power supply, temperature, and output/input
loading variables. National does not recommend operation of FACT TM circuits outside
databook specifications.
Recommended Operating Conditions
(Note 1)
Supply Voltage (Vcc)
4.5V to 5.5V
Input Voltage (Vi)
0V to Vcc
0V to Vcc
Output Voltage (Vo)
Operating Temperature (Ta)
-55 C to +125 C
Minimum Input Edge Rate Delta V/Delta t
ACTQ Devices
Vin from 0.8V to 2.0V
Vcc @ 4.5V, 5.5V
125 mV/ns
Note 1: PLCC packaging is not recommended for applications requiring greater than 2000
temperature cycles from -40C to + 125C.
3
MICROCIRCUIT DATA SHEET
MN54ACTQ241-X REV 2A0
Electrical Characteristics
DC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 3 IS GUARANTEED BUT NOT
TESTED.
PIN-
NAME
SUB-
SYMBOL
IIH
PARAMETER
CONDITIONS
NOTES
MIN
MAX UNIT
GROUPS
High Level input VCC=5.5V, VIH=5.5V
Current
1, 2 INPUT
1, 2 INPUT
1, 2 INPUT
1, 2 INPUT
1, 2 OUTPUT
1, 2 OUTPUT
1, 2 OUTPUT
1, 2 OUTPUT
1, 2 OUTPUT
0.1
uA
uA
uA
uA
V
1
1.0
-0.1
-1.0
.36
.50
.36
.50
.10
2, 3
1
IIL
VOL
Low Level input
Current
VCC=5.5V, VIL=0.0V
2, 3
1
Low level output VCC=4.5V, VIH=2.0V, VIL=0.8V,
voltage
IOL=24.0mA
V
2, 3
1
VCC=5.5V, VIH=2.0V, VIL=0.8V,
IOL=24.0mA
V
V
2, 3
VCC=4.5V, VIH=2.0V, VIL=0.8V,
IOL=50.0uA
V
1, 2,
3
VCC=5.5V, VIH=2.0V, VIL=0.8V,
IOL=50.0uA
1, 2 OUTPUT
.10
V
V
V
V
1, 2,
3
VIOL
VOH
Dynamic Output
Current LOW
VCC=5.5V, VIH=5.5V, VIL=0.0V,
IOL=50.0mA
1,
2, 5
OUTPUT
1.65
1, 2,
3
High Level Output VCC=4.5V, VIL=0.8V, VIH=2.0V,
1, 2 OUTPUT 4.40
1, 2,
3
Voltage
IOH=-50.0uA
VCC=5.5V, VIL=0.8V, VIH=2.0V,
IOH=-50.0uA
1, 2 OUTPUT 5.40
1, 2,
3
VCC=4.5V, VIL=0.8V, VIH=2.0V,
IOH=-24.0mA
1, 2 OUTPUT 3.86
1, 2 OUTPUT 3.70
1, 2 OUTPUT 4.86
1, 2 OUTPUT 4.70
V
V
V
V
V
1
2, 3
1
VCC=5.5V, VIL=0.8V, VIH=2.0V,
IOH=-24.0mA
2, 3
VIOH
ICCH
Dynamic Output
Current HIGH
VCC=5.5V, VIH=5.5V, VIL=0.0V,
IOH=-50.0mA
1,
OUTPUT 3.85
1, 2,
3
2, 5
Supply Current
Supply Current
Supply Current
Supply Current
VCC=5.5V
1, 2 VCC
1, 2 VCC
1, 2 VCC
1, 2 VCC
1, 2 VCC
1, 2 VCC
1, 2 VCC
1, 2 VCC
4.0
80
uA
uA
uA
uA
uA
uA
mA
mA
1
2, 3
1
ICCL
ICCZ
ICCT
VCC=5.5V
4.0
80
2, 3
1
VCC=5.5V
4.0
80
2, 3
1
VCC=5.5V, VIHT=VCC-2.1V
1.0
1.6
2, 3
4
MICROCIRCUIT DATA SHEET
MN54ACTQ241-X REV 2A0
Electrical Characteristics
DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 3 IS GUARANTEED BUT NOT
TESTED.
PIN-
NAME
SUB-
SYMBOL
IOZH
PARAMETER
CONDITIONS
NOTES
MIN
MAX UNIT
GROUPS
Maximum TRI-STATE VCC=4.5V, VIH=2.0V, VM=4.5V
Leakage Current
1, 2 OUTPUT
1, 2 OUTPUT
1, 2 OUTPUT
1, 2 OUTPUT
1, 2 OUTPUT
1, 2 OUTPUT
1, 2 OUTPUT
1, 2 OUTPUT
1, 2 INPUT
0.25
uA
uA
uA
uA
1
5.0
2, 3
1
VCC=5.5V, VIH=2.0V, VM=5.5V
0.25
5.0
2, 3
1
IOZL
Maximum TRI-STATE VCC=4.5V, VIH=2.0V, VM=4.5V
Leakage Current
-0.25 uA
-5.0 uA
-0.25 uA
2, 3
1
VCC=5.5V, VIH=2.0V, VM=5.5V
-5.0
-1.2
uA
V
2, 3
VIKL
VIKH
VILD
VCC=4.5V, IKL=-18mA
VCC=4.5V, IKH=18mA
1, 2,
3
1, 2 INPUT
6, 9 INPUT
5.7
0.8
V
V
1, 2,
3
Maximum Low Level VCC=5.0V, LOAD 50pF / 500 OHMS
Dynamic Input
Voltage
4
4
4
4
4
4
VIHD
VOLP
VOLV
VOHV
VOHP
Minimum High
Level Dynamic
Input Voltage
VCC=5.0V, LOAD 50pF / 500 OHMS
VCC=5.0V, LOAD 50pF / 500 OHMS
VCC=5.0V, LOAD 50pF / 500 OHMS
VCC=5.0V, LOAD 50pF / 500 OHMS
VCC=5.0V, LOAD 50pF / 500 OHMS
6, 9 INPUT
6, 8 OUTPUT
6, 8 OUTPUT
2.2
V
V
V
V
V
Quiet Output
Maximum Dynamic
VOL
1.5
Quiet Output
Minimum Dynamic
VOL
-1.2
Quiet Output
Minimum Dynamic
VOH
6,
10
OUTPUT
OUTPUT
VOH
-1.6
Quiet Output
Maximum Dynamic
VOH
6,
10
VOH
+1.0
5
MICROCIRCUIT DATA SHEET
MN54ACTQ241-X REV 2A0
Electrical Characteristics
AC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.)
AC: CL=50pf, RL=500 OHMS, TR=3.0ns & TF=3.0ns, Temp range: -55C to +125C. NOTE: -55C TEMPERATURE, SUBGROUP
11 IS GUARANTEED BUT NOT TESTED.
PIN-
NAME
SUB-
SYMBOL
tpLH
PARAMETER
CONDITIONS
NOTES
MIN
1.5
MAX UNIT
7.0
GROUPS
Propagation Delay VCC=4.5V
3,
In to
4, 7 On
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
9
3,
In to
4, 7 On
1.5
1.5
1.5
8.0
7.0
8.0
9.5
10.5
9.5
10.5
8.5
9.5
8.5
9.5
10, 11
tpHL
tpZH
tpZL
tpHZ
tpLZ
Propagation Delay VCC=4.5V
3,
In to
4, 7 On
9
3,
In to
4, 7 On
10, 11
Output Enable
Time
VCC=4.5V
VCC=4.5V
VCC=4.5V
VCC=4.5V
3,
OE1/OE2 1.5
4, 7 to On
9
3,
OE1/OE2 1.5
4, 7 to On
10, 11
9
Output Enable
Time
3,
OE1/OE2 1.5
4, 7 to On
3,
OE1/OE2 1.5
4, 7 to On
10, 11
9
Output Disable
Time
3,
OE1/OE2 1.5
4, 7 to On
3,
OE1/OE2 1.5
4, 7 to On
10, 11
9
Output Disable
Time
3,
OE1/OE2 1.5
4, 7 to On
3,
OE1/OE2 1.5
4, 7 to On
10, 11
Note 1: SCREEN TESTED 100% ON EACH DEVICE AT +25C & +125C TEMPERATURE, SUBGROUPS 1, 2, 7, &
8.
Note 2: SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE,
SUBGROUPS A1, 2, 7, & 8.
Note 3: SCREEN TESTED 100% ON EACH DEVICE AT +25C TEMPERATURE ONLY SUBGROUP A9.
Note 4: SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE,
SUBGROUPS A9 & 10.
Note 5: TRANSMISSION LINE DRIVING TEST, GUARDBANDED LIMITS SET FOR +25C, 2 MSEC DURATION MAX.
Note 6: GUARANTEED BUT NOT TESTED. (DESIGN CHARACTERIZATION DATA)
Note 7: +25C & +125C MIN LIMITS GUARANTEED FOR 5.5V BY GUARDBANDING 4.5V MINIMUM LIMITS.
Note 8: MAX NUMBER OF OUTPUTS DEFINED AS (N). DATA INPUTS ARE DRIVEN 0V TO 3V. ONE OUTPUT @
VOL.
Note 9: MAX NUMBER OF DATA INPUTS (N) SWITCHING. (N-1) INPUTS SWITCHING 0V TO 3V.
INPUT-UNDER-TEST SWITCHING 3V TO THRESHOLD (VILD), 0V TO THRESHOLD (VIHD), FREQ= 1
MHZ.
Note 10: MAX NUMBER OF OUTPUTS DEFINED AS (N). DATA INPUTS ARE DRIVEN 0V TO 3V. ONE OUTPUT @
VOH.
6
MICROCIRCUIT DATA SHEET
MN54ACTQ241-X REV 2A0
Revision History
Rev ECN # Rel Date Originator Changes
2A0
M0003171 03/09/99
Linda Collins
Added VOHV and VOHP. Added note 10.
7
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明