16244-BN-F-ST-LED-GY-12 [ETC]
16 Character by 2 Line Alphanumeric LCD Assembly With Embedded Controller; 16字符由2号线字母数字LCD组件，带嵌入式控制器
| 型号： | 16244-BN-F-ST-LED-GY-12 |
| 厂家： | 
ETC |
| 描述： | 16 Character by 2 Line Alphanumeric LCD Assembly With Embedded Controller |
| 文件： | 总16页 (文件大小：223K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PACIFIC DISPLAY DEVICES
LCD Component Data Sheet
Model Number: 16244
16 Character by 2 Line
Alphanumeric LCD Assembly
With Embedded Controller
CONTENTS
1.
GENERAL INFORMATION
1.1 Product Overview
2
2
3
3
3
4
4
5
1.2 Part Numbering System
1.3 Absolute Maximum Ratings
1.4 Circuit Block Diagram
1.5 Mechanical Characteristics
1.6 Input Signal Function
1.7 LCM Contrast Control and Bias
1.8 LCD Dimensions
2.
3.
ELECTRICAL / OPTICAL CHARACTERISTICS
2.1 DC Electrical Characteristics
2.2 AC Electrical Characteristics
2.3 Optical Characteristics
2.4 LED Backlight Characteristics
2.5 EL Panel Backlight Characteristics
6
6
8
9
9
OPERATING PRINCIPALS AND METHODS
3.1 LCD Controller Display and Control Functions
3.2 Display Data RAM Address Map
10
12
4.
5.
RELIABILITY
13
14
PRECAUTIONS FOR USING LCD MODULES
139 Avenida Victoria – Suite 100 – San Clemente, CA – 92672
Tel: 949-361-8957 – Fax: 949-361-9158 – Web: www.pacificdisplay.com
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 16244
1. GENERAL INFORMATION
1.1 Product Overview
• 16 Character x 2 line Alphanumeric Dot Matrix LCD Module
• LCD Controller: Embedded S6A0069 or equivalent alpha-numeric controller
• Multiplexing driving: 1/16 duty, 1/5 bias
• Operating Mode: Super Twisted Nematic (STN) technology
• LCD Module Service Life: 100,000 hours minimum
1.2 Part Numbering System
16244
-SL -F -ST -LED -GY -6
¾ Custom Option Designator
(Blank)
•
¾ Operating Mode
•
•
•
(-GR) Green
(-SL) Silver
(-BN) Blue Negative
¾ Rear Polarizer Options:
•
•
•
(-R) Reflective
(-F) Transflective
(-M) Transmissive
¾ Operating Temperature
•
•
(-ST) Standard (0 to +50 ºC)
(-ET) Extended (-20 to +70 ºC)
¾ Backlight Options:
•
•
•
(-LED) LED Array Backlight
(-ELP) EL Panel Backlight
¾ Backlight Coloration Options:
•
•
•
•
(-GY) LED - Green/Yellow
(-AM) LED - Amber
(-RD) LED - Red
(-BG) ELP – Blue Green
¾ Viewing Angle
•
•
(-6) 6 o’clock
(-12) 12 0’clock
PACIFIC DISPLAY DEVICES
11.07.2005
2
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 16244
1.3 Absolute Maximum Ratings
Parameter
Supply voltage for logic
Supply voltage for LCD
Input voltage
Standard Operating temperature
Standard Storage temperature
Extended Operating temperature
Extended Storage temperature
Soldering Temp
Symbol
VDD
VDD – V0
VI
TOP (-ST)
TST (-ST)
TOP (-ET)
TST (-ET)
Tsolder
Min
-0.3
--
-0.3
0
-10
-20
-30
Max
7.0
VDD +0.3
VDD +0.3
50
Unit
V
V
V
ºC
ºC
ºC
ºC
ºC
60
70
80
260
1.4 Circuit Block Diagram
DB0
~
DB7
Seg80
RS
R/W
CONTROLLER
IC
E
LCD PANEL
16 CHARACTERS x 2 LINES
VSS
VDD
Com16
S6A0069
VO
BLA
BLK
LED / EL BACK LIGHT
1.5 Mechanical Characteristics
Item
Contents
Unit
84.0 x 44.0 x 14.2 Max (w/ LED Backlight)
84.0 x 44.0 x 10.0 Max (w/ ELP, Reflective)
62.2 x 17.9
mm
Module size (W×H×T)
mm
dots
mm
mm
mm
Viewing area (W×H)
Character matrix (W×H)
Character size (W×H)
Dot size (W×H)
5 × 8
2.95 x 5.55
0.55 x 0.65
0.60 x 0.70
Dot pitch (W×H)
PACIFIC DISPLAY DEVICES
11.07.2005
3
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 16244
1.6 Input Signal Function
Pin NO.
Symbol
VSS
VDD
VO
Level
0V
5.0V
---
Description
1
2
3
Ground
Supply voltage for logic
Input voltage for LCD
4
5
6
7
RS
R/W
E
DB0
H/L
H/L
H, H → L
H/L
H : Data signal, L : Instruction signal
H : Read mode, L : Write mode
Chip enable signal
Data bit 0
8
DB1
H/L
Data bit 1
9
DB2
H/L
Data bit 2
10
11
12
13
14
15
16
DB3
DB4
DB5
DB6
H/L
H/L
H/L
H/L
H/L
4.2V
0V
Data bit 3
Data bit 4
Data bit 5
Data bit 6
Data bit 7
Back light anode
Back light cathode
DB7
LED A(+)
LED K (-)
1.7 LCM Contrast Control and Bias
PACIFIC DISPLAY DEVICES
11.07.2005
4
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 16244
1.8 LCM Dimensions
PACIFIC DISPLAY DEVICES
11.07.2005
5
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
2. ELECTRICAL / OPTICAL CHARACTERISTICS
MODEL NO: 16244
2.1 DC Electrical Characteristics (VDD = +5V±10% , VSS = 0V, Ta = 25°C )
Parameter
Supply voltage for logic
Supply current for logic
Symbol
VDD
Condition
Min
4.5
---
---
---
---
2.2
-0.3
Typ
5.0
Max
5.5
3
---
---
---
VDD
0.6
Unit
V
mA
V
V
V
---
---
0°C
25°C
50°C
---
IDD
1.38
5.10
4.50
4.30
---
Operating voltage for LCD*
VDD-VO
Input voltage ' H ' level
Input voltage ' L ' level
VIH
VIL
V
V
---
---
*Note: -ET temp range will require up to maximun 8V biasing and require a minimum external voltage supply of -3V @-20°C.
2.2 AC Electrical Characteristics
• Write Mode
Characteristic
E cycle time
E rise time
Symbol
Min.
500
---
Typ.
---
---
Max.
---
25
Unit
ns
ns
Test pin
tC
tr
E
E
E fall time
tf
---
---
25
ns
E
E pulse width (High, Low)
R/W and RS set-up time
R/W and RS hold time
Data set-up time
Data hold time
tW
tSU1
th1
tSU2
th2
220
40
10
60
10
---
---
---
---
---
---
---
---
ns
ns
ns
ns
E
R/W, RS
R/W, RS
DB0 ~ DB7
DB0 ~ DB7
---
---
ns
PACIFIC DISPLAY DEVICES
11.07.2005
6
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 16244
• Read Mode
Characteristic
Symbol
Min.
500
---
Typ.
---
---
Max.
---
25
Unit
ns
ns
Test pin
E cycle time
tC
tr
E
E
E rise time
E fall time
tf
---
---
25
ns
E
E pulse width
tW
tSU
th
tD
tDH
220
40
10
---
20
---
---
---
---
---
---
---
120
---
ns
ns
ns
ns
E
R/W and RS set-up time
R/W and RS hold time
Data output delay time
Data hold time
R/W, RS
R/W, RS
DB0 ~ DB7
DB0 ~ DB7
---
ns
PACIFIC DISPLAY DEVICES
11.07.2005
7
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 16244
2.3 Optical Characteristics (VOP = 4.7V, Ta = 25°C )
Item
Symbol
Condition
Min Typ Max Unit
Remarks
---
Note
Tr
Tf
Cr
fF
---
---
---
---
---
---
3
---
25
33
52
33
250
200
5.0
64
380
300
---
ms
ms
---
1
1
2
2
3
3
3
3
Response time
---
---
---
Contrast Ratio
Frame Frequency
---
Hz
---
---
---
---
---
---
---
---
deg
deg
deg
deg
∅ = 90°
∅ = 270°
∅ = 0°
∅ = 180°
Viewing angle
range
θ
Cr ≥ 2
Note1: Definition of response time.
Note2: Definition of contrast ratio ‘Cr’
.
Note3: Definition of viewing angle range ‘θ’.
PACIFIC DISPLAY DEVICES
11.07.2005
8
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
2.4 LED Backlight Characteristics
MODEL NO: 16244
■ Yellow-Green LED Operating Characteristics (5V - Array Lit)
Standard
Typ.
4.1
Item
Symbol
Conditions
Unit
Min.
3.8
---
Max.
4.4
260
---
Forward Voltage
Forward Current
Reverse Voltage
Vf
IF
VR
Ta= 25 °C
Ta= 25 °C
Ta= 25 °C
VDC
mA
V
120
8
---
■ Life (Array or Edge Lit)
Standard
Item
Conditions
Ta= 25 °C
Unit
Min.
100,000
Max.
---
Life
hrs
2.5 EL Panel Backlight Characteristics
■ Blue-Green EL Panel Operating Characteristics:
Standard
Item
Conditions
Unit
Min.
Typ.
Max.
100VAC RMS, 400Hz
Current Consumption
---
2.5
3.9
mA
Ta: 25°C
EL Drive Voltage
EL Drive Frequency
Operating Temperature
Storage Temperature
Luminance
---
---
---
---
---
---
-35°C
-40°C
40
100
400
---
---
50
150
1000
+50°C
+60°C
---
VAC RMS
Hz
°C
°C
100VAC RMS, 400Hz
Ta: 25°C
cd/m2
Hrs
Luminance Half-Life
3500
---
---
*Note: half life is defined as Luminance being reduced by 50%
PACIFIC DISPLAY DEVICES
11.07.2005
9
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 16244
3. OPERATING PRINCIPALS AND METHODES
• Control and Display Command
Exe Time
f=250khz
1.64ms
1.64ms
42μs
Command
Display Clear
Return Home
Entry Mode Set
RS
L
L
R/W
L
L
DB7
L
L
DB6
L
L
DB5
L
L
DB4
L
L
DB3
L
L
DB2
L
L
DB1
L
H
DB0
H
X
Remark
Cursor move to first digit
• I/D : Set cursor move direction
L
L
L
L
L
L
L
H
I/D
SH
H
Increase
I/D
L
Decrease
• SH : Specifies shift of display
H
L
Display is shifted
SH
Display is not
shifted
Display On/Off
L
L
L
L
L
L
H
D
C
B
42μs
• Display
D
H
L
Display on
Display off
• Cursor
H
L
Cursor on
Cursor off
C
• Blinking
H
L
Blinking on
Blinking off
B
Shift
L
L
L
L
L
H
S/C
R/L
X
X
42μs
42μs
H
L
H
L
Display shift
Cursor move
Right shift
Left shift
S/C
R/L
Set Function
L
L
L
L
H
DL
N
F
X
X
H
L
8 bits interface
4 bits interface
DL
N
H
L
2 line display
1 line display
H
L
5 X 10 dots
5 X 7 dots
F
Set Cg Ram Address
L
L
L
L
L
H
L
H
H
CG RAM address
(corresponds to cursor address)
DD RAM address
CG RAM Data is sent and
received after this setting
DD RAM Data is sent and
received after this setting
42μs
42μs
0μs
Set Dd Ram
Address
Read Busy Flag &
Address
BF
Address Counter used for
both DD & CG RAM address
H
Busy
BF
L
Ready
− Reads BF indication internal
operating is being performed
− Reads addr counter contents
Write data into DD or CG RAM
Write Data
Read Data
H
H
L
H
Write Data
Read Data
46μs
46μs
Read data from DD or CG RAM
X : Don’t care
PACIFIC DISPLAY DEVICES
11.07.2005
10
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 16244
• Initializing by Instruction
Power On
|
Wait for more than 15ms after VDD rises to 4.5V
|
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 BF cannot be checked before this instruction.
Function Set
0
0
0
0
1
1
*
*
*
*
|
Wait for more than 4.1ms
|
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 BF cannot be checked before this instruction.
Function Set
0
0
0
0
1
1
*
*
*
*
|
Wait for more than 100μs
|
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 BF cannot be checked before this instruction.
0
0
0
0
1
1
*
*
*
*
Function Set
|
|
|
|
|
BF can be checked after following
instruction.
When BF is not checked, the waiting time
between instructions is longer than execution
instruction time.
|
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Function Set (Specify the number of display
0
0
0
0
1
1
N
F
*
*
lines and character font.) The number of
display lines and character font cannot be
changed afterwards.
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
1
0
0
I/D
0
1
S
Display Off
Display Clear
Entry Mode Set
|
|
È
Initialization ends
PACIFIC DISPLAY DEVICES
11.07.2005
11
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 16244
3.2 Display Data RAM Address Map
LCD Character Location map
Characters
First line
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16
00H 01H 02H 03H 04H 05H 06H 07H 08H 09H 0AH 0BH 0CH 0DH 0EH 0FH
Second line 40H 41H 42H 43H 44H 45H 46H 47H 48H 49H 4AH 4BH 4CH 4DH 4EH 4FH
PACIFIC DISPLAY DEVICES
11.07.2005
12
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
4. RELIABILITY
MODEL NO: 16244
Environmental Test
No
Test Item
Content of Test
Test Condition
Applicable
Standard
------
.
1
High temperature
storage
Endurance test applying the high storage
temperature for a long time.
80 °C
200 hrs
2
3
Low temperature
storage
High temperature
operation
Endurance test applying the low storage
temperature for a long time.
Endurance test applying the electric stress
(Voltage & Current) and the thermal stress to
the element for a long time.
Endurance test applying the electric stress
under low temperature for a long time.
Endurance test applying the high temperature
and high humidity storage for a long time.
------
-30 °C
200 hrs
70 °C
200 hrs
------
------
4
5
6
Low temperature
operation
-20 °C
200 hrs
80 °C , 90 %RH
96 hrs
MIL-202E-103B
JIS-C5023
MIL-202E-103B
JIS-C5023
High temperature /
Humidity storage
High temperature /
Humidity operation
Endurance test applying the electric stress
(Voltage & Current) and temperature / humidity 96 hrs
stress to the element for a long time.
70 °C , 90 %RH
7
Temperature cycle
Endurance test applying the low and high
temperature cycle.
-20°C / 70°C
10 cycles
------
-20°C
25°C
70°C
30min.
5min.
30min.
1
Mechanical Test
Endurance test applying the vibration during
transportation and using.
8
Vibration test
Shock test
MIL-202E-201A
JIS-C5025
JIS-C7022-A-10
10∼22Hz → 1.5mmp-p
22∼500Hz → 1.5G
Total 0.5hrs
50G Half sign
wave 1l msedc
3 times of each direction
115 mbar
9
Constructional and mechanical endurance test
applying the shock during transportation.
MIL-202E-213B
10
Atmospheric
pressure test
Endurance test applying the atmospheric
pressure during transportation by air.
MIL-202E-105C
40 hrs
Others
11
Static electricity test Endurance test applying the electric stress to the
terminal.
MIL-883B-
3015.1
VS=800V , RS=1.5 kΩ
CS=100 pF
1 time
∗∗∗ Supply voltage for logic system = VDD. Supply voltage for LCD system = Operating voltage at 25°C
LCD Panel Service Life
Definition of panel service life
•
•
•
•
•
100,000 hours minimum at 25° C ±10%
Contrast becomes 30% of initial value
Current consumption becomes three times higher than initial value
Remarkable alignment deterioration occurs in LCD cell layer
Unusual operation occurs in display functions
PACIFIC DISPLAY DEVICES
11.07.2005
13
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
5. PRECAUTIONS FOR USING LCD MODULES
Installing LCD Modules
MODEL NO: 16244
The hole in the printed circuit board is used to fix LCM as shown in the picture below. Attend to the following items when
installing the LCM.
1) Cover the surface with a transparent protective plate to protect the polarizer and LC cell.
2) When assembling the LCM into other equipment, the spacer to the bit between the LCM and the fitting plate
should have enough height to avoid causing stress to the module surface, refer to the individual specifications for
measurements. The measurement tolerance should be ±0.1mm.
Precaution for Handing LCD Modules
Since LCM has been assembled and adjusted with a high degree of precision, avoid applying excessive shocks to the module or
making any alterations or modifications to it.
1) Cover the surface with a transparent protective plate to protect the polarizer and LC cell.
2) Do not alter, modify or change the shape of the tab on the metal frame.
3) Do not make extra holes on the printed circuit board, modify its shape or change the positions of components to
be attached.
4) Do not damage or modify the pattern writing on the printed circuit board.
5) Absolutely do not modify the zebra rubber strip (conductive rubber) or heat seal connector.
6) Except for soldering the interface, do not make any alterations or modifications with a soldering iron.
7) Do not drop, bend or twist LCM.
Electro-Static Discharge Control
Since this module uses a CMOS LSI, the same careful attention should be paid to electrostatic discharge as for an ordinary
CMOS IC.
1) Make certain that you are grounded when handing LCM.
2) Before remove LCM from its packing case or incorporating it into a set, be sure the module and your body have
the same electric potential.
3) When soldering the terminal of LCM, make certain the AC power source for the soldering iron does not leak.
4) When using an electric screwdriver to attach LCM, the screwdriver should be of ground potentiality to minimize
as much as possible any transmission of electromagnetic waves produced sparks coming from the commutator of
the motor.
5) As far as possible make the electric potential of your work clothes and that of the work bench the ground
potential.
6) To reduce the generation of static electricity be careful that the air in the work is not too dried. A relative
humidity of 50%-60% is recommended.
Precaution for soldering to the LCM
1) Observe the following when soldering lead wire, connector cable and etc. to the LCM.
a) Soldering iron temperature : 280°C ± 10°C.
b) Soldering time : 3-4 sec.
2) Solder : eutectic solder.
PACIFIC DISPLAY DEVICES
11.07.2005
14
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 16244
3) If soldering flux is used, be sure to remove any remaining flux after finishing to soldering operation. (This does
not apply in the case of a non-halogen type of flux.) It is recommended that you protect the LCD surface with a
cover during soldering to prevent any damage due to flux spatters.
4) When soldering the electroluminescent panel and PC board, the panel and board should not be detached more
than three times. This maximum number is determined by the temperature and time conditions mentioned above,
though there may be some variance depending on the temperature of the soldering iron.
5) When remove the electroluminescent panel from the PC board, be sure the solder has completely melted, the
soldered pad on the PC board could be damaged.
Precautions for Operation
1) Viewing angle varies with the change of liquid crystal driving voltage (VO). Adjust VO to show the best contrast.
2) Driving the LCD in the voltage above the limit shortens its life.
3) Response time is greatly delayed at temperature below the operating temperature range. However, this does not
mean the LCD will be out of the order. It will recover when it returns to the specified temperature range.
4) If the display area is pushed hard during operation, the display will become abnormal. However, it will return to
normal if it is turned off and then back on.
5) Condensation on terminals can cause an electrochemical reaction disrupting the terminal circuit. Therefore, it
must be used under the relative condition of 40°C , 50% RH.
6) When turning the power on, input each signal after the positive/negative voltage becomes stable.
Safety
•
If the LCD panel breaks, be careful not to get the liquid crystal in your mouth. If the liquid crystal touches your skin
or clothes, wash it off immediately using soap and plenty of water.
Handling
•
•
The display panel is made of glass. Do not subject it to a mechanical shock by dropping it or impact.
If the display panel is damaged and the liquid crystal substance leaks out, be sure not to get any in your mouth. If the
substance contacts your skin or clothes, wash it off using soap and water.
•
•
Do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary.
The polarizer covering the display surface of the LCD module is soft and easily scratched. Handle this polarizer
carefully.
•
If the display surface becomes contaminated, breathe on the surface and gently wipe it with a soft dry cloth. If it is
heavily contaminated, moisten cloth with one of the following solvents :
o
o
Isopropyl alcohol
Ethyl alcohol
•
Solvents other than those above-mentioned may damage the polarizer. Especially, do not use the following.
o
o
o
Water
Ketone
Aromatic solvents
•
•
Exercise care to minimize corrosion of the electrode. Corrosion of the electrodes is accelerated by water droplets,
moisture condensation or a current flow in a high-humidity environment.
Install the LCD Module by using the mounting holes. When mounting the LCD module make sure it is free of
twisting, warping and distortion. In particular, do not forcibly pull or bend the I/O cable or the backlight cable.
Do not attempt to disassemble or process the LCD module.
•
•
•
NC terminal should be open. Do not connect anything.
If the logic circuit power is off, do not apply the input signals.
PACIFIC DISPLAY DEVICES
11.07.2005
15
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 16244
•
To prevent destruction of the elements by static electricity, be careful to maintain an optimum work environment.
o
o
o
Be sure to ground the body when handling the LCD modules.
Tools required for assembling, such as soldering irons, must be properly grounded.
To reduce the amount of static electricity generated, do not conduct assembling and other work under dry
conditions.
o
The LCD module is coated with a film to protect the display surface. Exercise care when peeling off this
protective film since static electricity may be generated.
Storage
•
•
•
•
When storing the LCD modules, avoid exposure to direct sunlight or to the light of fluorescent lamps
Store the module in a dark place where the temperature is 25 oC ±10 oC and the humidity below 65% RH.
Do not store the module near organic solvents or corrosive gases.
Do not crush, shake, or jolt the module (including accessories).
Cleaning
•
•
•
Do not wipe the polarizing plate with a dry cloth, as it may scratch the surface.
Wipe the module gently with soft cloth soaked with a petroleum benzene.
Do not use ketonic solvents (ketone and acetone) or aromatic solvents (toluene and xylene), as they may damage the
polarizing plate.
Others:
•
Liquid crystals solidify under low temperature (below the storage temperature range) leading to defective orientation
or the generation of air bubbles (black or white). Air bubbles may also be generated if the module is subject to a low
temperature.
•
If the LCD modules have been operating for a long time showing the same display patterns, the display patterns may
remain on the screen as ghost images and a slight contrast irregularity may also appear. A normal operating status can
be regained by suspending use for some time. It should be noted that this phenomenon does not adversely affect
performance reliability.
•
To minimize the performance degradation of the LCD modules resulting from destruction caused by static electricity
etc., exercise care to avoid holding the following sections when handling the modules.
-
-
Exposed area of the printed circuit board.
Terminal electrode sections.
PACIFIC DISPLAY DEVICES
11.07.2005
16
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明