120-107112 [ETC]
SPNO;
| 型号： | 120-107112 |
| 厂家： | 
ETC |
| 描述： | SPNO |
| 文件： | 总1页 (文件大小：53K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DC POWER
CONTACTORS
SPNO
TYPE 70 SPNO
Single Pole Normally Open Contact
Case is Dust Resistant and Isolated from Ground
SPECIFICATIONS
Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . 2.47”L x 3.48”W x 2.40”H
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 oz.
Temperature Range . . . . . . . . . . . . . . . . . . . -40° to +122°F
5
16
Terminations, Contacts. . . . . . . . . . . . . . . . . / ”-24 UNF-2A thread
Terminations, Coil. . . . . . . . . . . . . . . . . . . . . #10-32 UNF-2A thread
Recommended Mounting . . . . . . . . . . . . . . . . . . . Plunger vertical with cap down
Hardware Torque, Contact Terminal. . . . . . . . . . . 45-55 in. lbs.
Type 70 SPNO
WARNING – FIRE HAZARD
Must be installed in a dry and protected
place. Failure to protect solenoid from water
and other contaminants could result in Fire,
Property Damage, Serious Personal Injury,
or Death.
Hardware Torque, Coil Terminal . . . . . . . . . . . . . . 12-18 in. lbs.
Caution: A back-up wrench must be used to hold the bottom nut stationary.
Agency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U.L. 538 Recognized, File AU2138
Coil
Coil
Contact Rating (Amps) – Inductive Load
Model
Number
70-111225
70-111224
70-117224
70-120224
Duty
Cycle ➂
Continuous
Continuous
Continuous
Continuous
Terminal
Type ➀
3A
4
Pole
Form
SPNO Standard
SPNO Standard
SPNO Standard
SPNO Standard
Bracket Voltage Resistance Contact
Voltage
D.C.
12
12
24
Normally Open
Continuous Inrush
Normally Closed
Continuous
Style
D.C.
12
12
24
36
(Ohms) ➁ Material
Inrush
60
60
30
30
16
16
60
114
Copper
Copper
Copper
Copper
80
80
50
50
400
400
50
60
60
30
30
4
4
36
50
➀ “3A” = Coil Grounded to Case
“4” = Isolated Coil
➁ Coil resistance in Ohms @ 25°C
➂ Intermittent duty designs available.
TYPE 120 SPNO
Single Pole Normally Open Contact, Dust Resistant, Water Resistant
and Case is Isolated from Bracket
SPECIFICATIONS
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . 2.13”L x 2.88”W x 3.09”H (Std. Bracket)
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . 2.50”L x 3.00”W x 3.03”H (L-Shaped Bracket)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.0 oz.
Temperature Range, Intermittent Duty . . . . . -20° to +150°F
Temperature Range, Continuous Duty. . . . . -20° to +120°F
5
16
Terminations, Contacts. . . . . . . . . . . . . . . . . / ”-24 studs, .495” min. length
Terminations, Coil. . . . . . . . . . . . . . . . . . . . . #10-32, .451” min. length
Recommended Mounting . . . . . . . . . . . . . . . . . . . Coil terminals up or horizontal
Hardware Torque, Contact Terminal. . . . . . . . . . . 45-55 in. lbs.
Hardware Torque, Coil Terminal . . . . . . . . . . . . . . 12-18 in. lbs.
Type 120 SPNO
Caution: A back-up wrench must be used to hold the bottom nut stationary.
Coil
Coil
Contact Rating (Amps) – Inductive Load
Voltage Normally Open
Model
Duty
Terminal
Pole
Bracket Voltage Resistance Contact
Number
Cycle ➀
Type ➁
Form
SPNO Standard
SPNO Standard 12 ➄
SPNO Standard
SPNO
SPNO
Style
D.C.
12
(Ohms) ➂ Material
D.C.
12
12
12
12
14
Continuous
Inrush ➃
400
400
400
400
120-105711
120-105851
120-106131
120-106132
120-107112
Continuous
Continuous
Intermittent
Intermittent
Continuous
4
3A
4
4
4
16.0
16.0
6.0
Silver Alloy
Silver Alloy
Copper
100
100
80
80
100
12
12
14
L
L
6.0
Copper
26.0
Silver Alloy
400
➀ Intermittent Duty Cycle = 30 seconds “ON” maximum and 6 minutes “OFF”
➁ “4” = Isolated Coil
➂ Coil resistance in Ohms @ 25°C
➃ Inrush Current: Current applied within the first 1/2 second of contact closure
➄ Coil grounded to bracket
NOTE: CAUTION must be used in coil selection for use in 12 volt
sytems where battery charging may expose coil to continuous,
higher-than-rated voltage. 14 volt coils are recommended.
White-Rodgers will not be responsible for consequences of misap-
plied solenoids.
www.white-rodgers.com
119a
相关型号：
©2020 ICPDF网 联系我们和版权申明