B82422H1101M000 [EPCOS]
SMT inductors; SMT电感器型号: | B82422H1101M000 |
厂家: | EPCOS |
描述: | SMT inductors |
文件: | 总8页 (文件大小:161K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SMT inductors
SIMID series, SIMID 1210-H
Series/Type:
B82422H
Date:
October 2008
EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SMT inductors, SIMID series
SIMID 1210-H
B82422H
Size 1210 (EIA) or 3225 (IEC)
Rated inductance 0.1 H to 680 H
Rated current 61 mA to 2050 mA
Construction
■ Ferrite drum core
■ Laser-welded winding
■ Flame-retardant molding
Features
■ Temperature range up to 150 °C
■ Very high current handling capability
■ Qualified to AEC-Q200
■ Suitable for lead-free reflow soldering
as referenced in JEDEC J-STD 020C
■ RoHS-compatible
Applications
■ Filtering of supply voltages, coupling, decoupling
■ DC/DC converters, switch-mode power supplies
■ Automotive electronics (e.g. single wire bus systems)
■ Telecommunications
■ Consumer and data processing equipment
■ Industrial electronics
Terminals
■ Base material CuSn6
■ Layer composition Cu, Ag, Sn (lead-free)1)
■ Electro-plated
Marking
■ Marking on component:
Manufacturer and letter “H”, L value (in μH),
tolerance of L value (coded), date of manufacture (YWWD)
■ Minimum data on reel:
Manufacturer, ordering code, L value, quantity, date of packing
Delivery mode and packing units
■ 8-mm blister tape, wound on 180-mm or 330-mm reel
■ Packing units:
180-mm reel: 2000 pcs./reel
330-mm reel: 7500 pcs./reel
1) Ni-barrier-plated terminals on request (B82422H*50).
Please read Cautions and warnings and
Important notes at the end of this document.
2
10/08
SMT inductors, SIMID series
SIMID 1210-H
B82422H
Dimensional drawing and layout recommendation
0.6±0.21)
B
C
D
B
IND0053-6
3.2±0.2
A
B
C
D
2.7
1.15
2.1
4.4
0.15 max.
2.5±0.2
Marking
1) Soldering area
IND0496-P-E
Dimensions in mm
Taping and packing
Blister tape
Reel
12.75+0.15
4±0.1
_0
14.4 max.
Component
1.5+0.1
2±0.05
8.4+1.5
_0
62±1.5
_
<
4±0.1
1.0+0.2
Direction of unreeling
2.8
IND0592-V
IND0557-F-E
Dimensions in mm
Please read Cautions and warnings and
Important notes at the end of this document.
3
10/08
SMT inductors, SIMID series
SIMID 1210-H
B82422H
Technical data and measuring conditions
Rated inductance LR
Q factor Qmin
Measured with impedance analyzer Agilent 4294A
at frequency fL, 0.1 V, 20 °C
Measured with impedance analyzer Agilent 4294A
at frequency fQ, 20 °C
Rated temperature TR
Rated current IR
105 °C
Maximum permissible DC with inductance decrease
ΔL/L0 ≤ 10% and temperature increase
of ≤ 45 K at rated temperature
Self-resonance frequency fres,min
DC resistance Rmax
Measured with network analyzer Agilent 8753D, 20 °C
Measured at 20 °C
Solderability (lead-free)
Sn95.5Ag3.8Cu0.7: (245 ±5) °C, (5 ±0.3) s
Wetting of soldering area ≥ 90%
(based on IEC 60068-2-58)
Resistance to soldering heat
Climatic category
260 °C, 40 s (as referenced in JEDEC J-STD 020C)
55/150/56 (to IEC 60068-1)
Storage conditions
Mounted: –55°C … +150 °C
Packaged: –25 °C … +40 °C, ≤ 75% RH
Weight
Approx. 50 mg
Please read Cautions and warnings and
Important notes at the end of this document.
4
10/08
SMT inductors, SIMID series
SIMID 1210-H
B82422H
Characteristics and ordering codes
LR
Tolerance
fL
Qmin
fQ
IR
Rmax
fres,min Ordering code1)2)
(
180-mm reel)
μH
MHz
10
10
10
10
MHz
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
0.796
0.796
0.796
0.796
0.796
0.796
mA
Ω
MHz
^
0.10 ±20%
0.15
M
10
10
10
10
2050
1880
1760
1650
1540
1370
1270
1120
1000
840
770
660
500
390
330
280
230
180
150
120
100
90
0.03 1000
B82422H1101M000
B82422H1151M000
B82422H1221M000
B82422H1331M000
B82422H1471M000
B82422H1681M000
B82422H1102+000
B82422H1152+000
B82422H1222+000
B82422H1332+000
B82422H1472+000
B82422H1682+000
B82422H1103+000
B82422H1153+000
B82422H1223+000
B82422H1333+000
B82422H1473+000
B82422H1683+000
0.04
0.04
0.05
0.05
0.07
0.09
0.12
0.15
0.20
0.24
0.33
0.46
0.72
1.0
800
600
500
400
200
150
110
90
0.22
0.33
0.47
0.68
1.0
7.96 10
7.96 10
7.96 10
7.96 10
7.96 10
7.96 10
7.96 10
7.96 10
2.52 12
2.52 12
2.52 12
2.52 15
2.52 15
2.52 15
0.796 20
0.796 20
0.796 20
0.796 20
0.796 20
0.796 20
^
±5%
J
^
1.5
±10%
K
2.2
3.3
70
4.7
46
6.8
35
10
30
15
22
26
21
33
1.4
15
47
2.1
12
68
3.4
10
100
150
220
330
470
680
4.8
8.0 B82422H1104+000
6.0 B82422H1154+000
5.5 B82422H1224+000
4.5 B82422H1334+000
3.5 B82422H1474+000
3.0 B82422H1684+000
7.5
10.9
13.0
20.0
31.0
76
61
Intermediate values and closer tolerances on request.
Higher currents possible at temperatures <TR on request.
Sample kit available. Ordering code: B82422X002
For more information refer to chapter “Sample kits".
1) Replace the + by the code letter for the required inductance tolerance.
For reel size 330 mm the last digit has to be an »8«. Example: B82422H1102M008
2) For Ni-barrier-plated terminals replace the last two digits “00” by “50” (reel 180 mm) or “58” (reel 330 mm).
Please read Cautions and warnings and
Important notes at the end of this document.
5
10/08
SMT inductors, SIMID series
SIMID 1210-H
B82422H
Impedance |Z| versus frequency f
measured with impedance analyzer Agilent
4294A, typical values at 20 °C
Inductance L versus DC load current IDC
measured with LCR meter Agilent 4284A,
typical values at 20 °C
IND0608-P
IND0499-X
103
µH
106
Ω
B82422H
B82422H
680 µH
100 µH
L
|Z|
105
104
103
102
101
100
102
10 µH
1 µH
101
100
680 µH
100 µH
10 µH
1 µH
0.1 µH
_1
10
0.1 µH
_2
106
107
108
Hz 109
f
10
_2
_1
10
10
100
A 101
IDC
Q factor versus frequency f
Current derating Iop/IR
measured with impedance analyzer
Agilent 4294A, typical values at 20 °C
versus ambient temperature TA
(rated temperature TR = 105 °C)
IND0498-R-E
IND0497-H
1.2
25
20
15
10
5
B82422H
B82422H
Iop
IR
Q
1.0
0.8
0.6
0.4
0.2
0
680 µH
100 µH
10 µH
1 µH
0.1 µH
0
104
105
106
Hz 107
f
0
20 40 60 80 100 120
C 160
˚
TA
6
10/08
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
7
10/08
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with
them than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very
high level of operational safety and especially in customer applications in which the malfunction
or failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of
the customer application or other action taken by the customer (e.g. installation of protective
circuitry or redundancy) that no injury or damage is sustained by third parties in the event of
malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue,
MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are
trademarks registered or pending in Europe and in other countries. Further information will be
found on the Internet at www.epcos.com/trademarks.
8
03/09
相关型号:
B82422H1102K058
1 ELEMENT, 1uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD, CHIP, 1210, ROHS COMPLIANT
EPCOS
B82422H1102K058
General Purpose Inductor, 1uH, 10%, 1 Element, Ferrite-Core, SMD, 1210, CHIP, 1210, ROHS COMPLIANT
TDK
©2020 ICPDF网 联系我们和版权申明