B81130-C1155-M026 [EPCOS]
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 560 V, 1.5 uF, THROUGH HOLE MOUNT, RADIAL LEADED;型号: | B81130-C1155-M026 |
厂家: | EPCOS |
描述: | CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 560 V, 1.5 uF, THROUGH HOLE MOUNT, RADIAL LEADED 电容器 |
文件: | 总5页 (文件大小:133K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
EMI Suppression Capacitors
X2 / 275 Vac
B 81 130
X2 capacitors with very small dimensions
Rated ac voltage 275 V, 50/60 Hz
Construction
ꢀ Dielectric: polypropylene (MKP)
ꢀ Plastic case (UL 94 V-0)
ꢀ Epoxy resin sealing, flame-retardant
ꢀ Impregnated
Features
ꢀ Very small dimensions
ꢀ Self-healing properties
Terminals
Lead spacing Lead diameter Lead length l1
0,4
10 mm
≥ 15 mm
∅d (mm)
0,6
(mm)
ꢀ Parallel wire leads, tinned
ꢀ Two standard lead lengths
available: 6 mm und 26 mm
6 – 1
—
0,8
6 – 1 26
2
Other lead lengths available upon request.
Lead spacing = 10 mm Lead spacing ≥ 15 mm
(22 nF ... 1,0 µF)
Marking
Manufacturer’s logo and lot number
date code,
rated capacitance (coded),
capacitance tolerance (code letter),
rated ac voltage, type number,
interference suppression sub-class (X2),
style (MKP), climatic category,
awarded marks of conformity.
AAAAA C1103
XX-10n M 275V~
AAAAA C1104
XX-µ1 M 275V~
B81130 X2 MKP/SH
B81130 X2 MKP/SH
40/100/21/C
40/100/21/C
V
V
D
E
D
E
IEC 384-14(2) 250 V~
250 V~
KMK0570-T
KMK0571-2
Lead spacing = 27,5 mm
(1,5 and 2,2 µF)
AAAAA C1155
XX-1µ5 M 275V~
Delivery mode
B81130 X2 MKP/SH
Bulk (untaped)
Taped (Ammo pack or reel)
For notes on taping,
40/100/21/C
V
D
E
IEC 384-14(2)
250 V~
KMK0699-I
refer to chapter “Taping and packing”, page 274.
Marks of conformity
Marks of
Standards
Certificate
conformity
EN 132400 / IEC 384-14, 2nd edition
UL 1414 (VR = 250 Vac)
Approved by UL according to
CSA C22.2 No. 0; 1 (VR = 250 Vac)
18643-4670-1010/A1G
E97863/97NK11940A
E97863/97NK11940A
1)
1) Not for 1,5 and 2,2 µF
231 12/00
X2
B 81 130
275 Vac
Ordering codes and packing units
Lead
spacing
CR
Maximum
dimensions
b × h × l
(mm)
Ordering code1)
Packing units (pcs)
Ammo Reel
pack
Untaped
Lead length
0,4
mm
10
6 mm
26 mm
10 nF
15 nF
22 nF
33 nF
33 nF
47 nF
4,0 × 9,0 × 13,0 B81130-C1103-+
4,0 × 9,0 × 13,0 B81130-C1153-+
5,0 × 11,0 × 13,0 B81130-C1223-+
5,0 × 11,0 × 13,0 B81130-C1333-M
6,0 × 12,0 × 13,0 B81130-A1333-+
1000
1000
830
830
680
1700
1700
1300
1300
1100
1100
1000
1000
1000
1000
1000
1000
—
—
—
—
—
—
***
***
***
***
***
***
6,0 × 12,0 × 13,0 B81130-C1473-+
680
15
22 nF
33 nF
47 nF
68 nF
5,0 × 10,5 × 18,0 B81130-B1223-+
5,0 × 10,5 × 18,0 B81130-B1333-+
5,0 × 10,5 × 18,0 B81130-B1473-+
6,0 × 11,0 × 18,0 B81130-C1683-+
1170
1170
1170
960
960
830
1300
1300
1300
1100
1100
900
1000
1000
1000
1000
1000
1000
500
1000
1000
1000
1000
1000
800
***
***
***
***
0,10 µF 6,0 × 12,0 × 18,0 B81130-C1104-M
0,10 µF 7,0 × 12,5 × 18,0 B81130-A1104-+
0,15 µF 8,5 × 14,5 × 18,0 B81130-C1154-+
0,22 µF 9,0 × 17,5 × 18,0 B81130-C1224-+
***
***
***
***
680
640
700
700
500
500
500
22,5
27,5
0,15 µF 6,0 × 15,0 × 26,5 B81130-B1154-+
0,22 µF 7,0 × 16,0 × 26,5 B81130-B1224-+
0,33 µF 8,5 × 16,5 × 26,5 B81130-C1334-+
680
580
480
390
390
370
700
600
500
400
400
350
720
630
510
540
540
510
500
500
450
350
300
300
***
***
***
0,47 µF 10,5 × 16,5 × 26,5 B81130-C1474-M
0,47 µF 10,5 × 18,5 × 26,5 B81130-A1474-+
***
***
0,68 µF 11,0 × 20,5 × 26,5 B81130-C1684-M
***
0,47 µF 11,0 × 21,0 × 31,5 B81130-B1474-+
0,68 µF 11,0 × 21,0 × 31,5 B81130-B1684-+
1,0 µF 12,5 × 21,5 × 31,5 B81130-C1105-M
1,0 µF 13,5 × 23,0 × 31,5 B81130-A1105-+
1,5 µF 15,0 × 24,5 × 31,5 B81130-C1155-M
1,5 µF 18,0 × 27,5 × 31,5 B81130-A1155-+
—
—
—
—
—
—
—
—
350
350
300
250
—
—
—
—
320
320
280
260
240
200
200
180
200
200
200
150
150
100
100
100
***
***
***
***
***
***
***
***
2,2 µF 18,0 × 27,5 × 31,5 B81130-C1225-M
2,2 µF 19,0 × 30,0 × 31,5 B81130-A1225-+
Capacitance tolerance: 20 % =ˆ M, 10 % =ˆ K (closer tolerances upon request)
1) Replace the + by the code letter for the required capacitance tolerance.
Replace the *** by the code number for the required lead length or packing.
000 = lead length 6 mm (untaped)
026 = lead length 26 mm (untaped)
289 = taped, Ammo pack
189 = taped, reel
232 12/00
B 81 130
275 Vac
X2
Technical data
Climatic category
40/100/21
in accordance with IEC 60068-1
Lower category temperature Tmin
− 40 °C
Upper category temperature Tmax + 100 °C
Passive flammability category
in accordance with IEC 40 (CO) 752 C
Damp heat test
21 days/40 °C/93 % relative humidity
Limit values after damp
heat test
Capacitance change |∆C/C|
Dissipation factor change ∆ tan δ
≤ 3 %
≤ 0,5 ⋅ 10−3 (at 1 kHz)
≤ 1,0 ⋅ 10−3 (at 10 kHz)
≥ 50 % of minimum
as-delivered values
Insulation resistance Ris
or time constant τ = CR ⋅ Ris
Permissible
275 V (50/60 Hz)
continuous ac voltage
Permissible continuous dc voltage 560 V
DC test voltage
2121 V, 2 s
Dissipation factor tan δ (in 10−3
at 20 °C
(upper limit values)
)
CR ≤ 0,1 µF 0,1 µF < CR ≤ 1 µF CR > 1 µF
1,0
at
1 kHz
100 kHz 5
1,0
10
1,0
13
Insulation resistance Ris
CR ≤ 0,33 µF
100 GΩ
CR > 0,33 µF
30 000 s
or time constant τ = CR ⋅ Ris
at 20 °C, rel. humidity ≤ 65 %
(minimum as-delivered values)
Impedance Z
versus frequency f
(typical values)
233 12/00
X2
B 81 130
275 Vac
Pulse handling capability
Maximum permissible voltage change per unit of time for non-sinusoidal voltages (pulse, sawtooth).
VR
Max. rate of voltage rise Vpp/τ in V/µs (for Vpp = VˆR)
Lead spacing
10 mm
290
15 mm
110
22,5 mm
50
27,5 mm
30
275 Vac
For Vpp < VˆR, the permissible voltage rise rate Vpp/τ may be multiplied by the factor VˆR/Vpp
.
Also refer to the calculation example in chapter “General technical information”, page 302.
VR
Pulse characteristic k0 in V2/µs (for Vpp ≤ VˆR)
Lead spacing
10 mm
15 mm
80 000
22,5 mm
35 000
27,5 mm
21 000
275 Vac
220 000
234 12/00
Herausgegeben von EPCOS AG
Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfältigung, Veröffentlichung, Verbreitung und
Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG
nicht gestattet.
Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften
zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen
für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgele-
genen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland.
Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte
darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsge-
sellschaft einzuholen.
Published by EPCOS AG
Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this bro-
chure and the information contained therein without EPCOS’ prior express consent is prohibited.
The information contained in this brochure describes the type of component and shall not be con-
sidered as guaranteed characteristics. Purchase orders are subject to the General Conditions for
the Supply of Products and Services of the Electrical and Electronics Industry recommended by the
ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
1
相关型号:
B81130-C1223-K189
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 760 V, 0.022 uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS
B81130-C1223-K289
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 760 V, 0.022 uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS
B81130-C1223-M000
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 760 V, 0.022 uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS
B81130-C1223-M189
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 760 V, 0.022 uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS
B81130-C1223-M289
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 760 V, 0.022 uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS
B81130-C1224-K000
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 760 V, 0.22 uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS
B81130-C1224-K026
Film Capacitor, Polypropylene, 560V, 10% +Tol, 10% -Tol, 0.22uF, Through Hole Mount, RADIAL LEADED
EPCOS
B81130-C1224-K189
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 760 V, 0.22 uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS
B81130-C1224-K289
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 760 V, 0.22 uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS
©2020 ICPDF网 联系我们和版权申明