B81122-C1682-M289 [EPCOS]

CAPACITOR, METALLIZED FILM, POLYESTER, 1200 V, 0.0068 uF, THROUGH HOLE MOUNT, RADIAL LEADED;
B81122-C1682-M289
型号: B81122-C1682-M289
厂家: EPCOS    EPCOS
描述:

CAPACITOR, METALLIZED FILM, POLYESTER, 1200 V, 0.0068 uF, THROUGH HOLE MOUNT, RADIAL LEADED

文件: 总5页 (文件大小:146K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
EMI Suppression Capacitors  
Y2 / 250 Vac  
B 81 122  
Y2 capacitors  
Rated ac voltage 250 V, 50/60 Hz  
Construction  
Dielectric:  
for  
for  
= 10 mm: polyester (MKT),  
15 mm: polypropylene (MKP)  
Internal series connection  
(for 15 mm)  
Plastic case (UL 94 V-0)  
Epoxy resin sealing, flame-retardant  
Impregnated  
Features  
Lead spacing Lead diameter Lead length l1  
0,4  
10 mm  
15 mm  
d (mm)  
0,6  
(mm)  
Very small dimensions  
Self-healing properties  
6 – 1  
0,8  
6 – 1 26  
2
Terminals  
Parallel wire leads, tinned  
Two standard lead lengths available:  
6 mm und 26 mm  
Other lead lengths available upon request  
Marking  
Manufacturer’s logo, lot number, date code,  
rated capacitance (coded),  
capacitance tolerance (code letter),  
rated ac voltage, type number,  
interference suppression sub-class (Y2),  
style (MKT or MKP), self-healing (SH),  
climatic category, awarded marks of conformity  
Lead spacing = 10 mm Lead spacing 15 mm  
AAAAA C1102  
XX-1n M 250V~  
AAAAA A1103  
XX-10n M 250V~  
B81122 Y2 MKT/SH  
40/100/21/C  
B81122 Y2 MKP/SH  
40/085/21/C  
V
V
D
E
D
E
IEC 384 14(2)  
KMK0576-8  
KMK0577-G  
Delivery mode  
Bulk (untaped)  
Taped (Ammo pack or reel)  
For notes on taping, refer to chapter “Taping and packing”, page 274.  
Marks of conformity  
Marks of  
Lead  
Standards  
Certificate  
conformity spacing  
10 mm  
EN 132400 / IEC 384-14, 2nd edition  
UL 1414  
CSA C22.2 No. 0; 1  
18643-4670-1007/A1K  
E97863/ 4NK15866A  
LR 59709-11  
15 mm EN 132400 / IEC 384-14, 2nd edition  
18643-4670-1012/22E56  
E97863/97NK03236  
UL 1414  
Approved by UL acc. to CSA C22.2 No. 0; 1 E97863/97NK03236  
253 12/00  
 
 
Y2  
B 81 122  
250 Vac  
Ordering codes and packing units  
Lead  
CR  
Maximum  
Ordering code1)  
Packing units (pcs)  
spacing  
dimensions  
Ammo Reel  
pack  
Untaped  
Lead length  
0,4  
mm  
10  
b × h × l (mm)  
6 mm  
26 mm  
1,0 nF  
1,5 nF  
2,2 nF  
3,3 nF  
4,7 nF  
5,6 nF  
6,8 nF  
10 nF  
15 nF  
22 nF  
27 nF  
33 nF  
47 nF  
56 nF  
68 nF  
4,0 × 9,0 × 13,0 B81122-C1102-M  
4,0 × 9,0 × 13,0 B81122-C1152-M  
5,0 × 11,0 × 13,0 B81122-C1222-M  
5,0 × 11,0 × 13,0 B81122-C1332-M  
6,0 × 12,0 × 13,0 B81122-C1472-M  
6,0 × 12,0 × 13,0 B81122-C1562-M  
6,0 × 12,0 × 13,0 B81122-C1682-M  
6,0 × 11,0 × 18,0 B81122-A1103-M  
7,0 × 12,5 × 18,0 B81122-A1153-M  
8,5 × 14,5 × 18,0 B81122-A1223-M  
8,5 × 14,5 × 18,0 B81122-A1273-M  
9,0 × 17,5 × 18,0 B81122-A1333-M  
7,0 × 16,0 × 26,5 B81122-A1473-M  
8,5 × 16,5 × 26,5 B81122-A1563-M  
10,5 × 16,5 × 26,5 B81122-A1683-M  
1000  
1000  
830  
830  
680  
680  
680  
960  
830  
680  
680  
640  
580  
480  
390  
390  
1700  
1700  
1300  
1300  
1100  
1100  
1100  
1100  
900  
700  
700  
700  
600  
500  
400  
400  
350  
250  
1000  
1000  
1000  
1000  
1000  
1000  
1000  
1000  
1000  
500  
500  
500  
630  
510  
540  
540  
320  
260  
***  
***  
***  
***  
***  
***  
***  
***  
***  
***  
***  
***  
***  
***  
***  
***  
***  
***  
***  
15  
1000  
800  
500  
500  
500  
500  
450  
350  
300  
200  
150  
100  
22,5  
27,5  
0,10 µF 10,5 × 20,5 × 26,5 B81122-A1104-M  
0,15 µF 11,0 × 21,0 × 31,5 B81122-A1154-M  
0,22 µF 13,5 × 23,0 × 31,5 B81122-A1224-M  
0,33 µF 18,0 × 27,5 × 31,5 B81122-A1334-M  
200  
Capacitance tolerance: 20 % (closer tolerances upon request)  
1) Replace the *** by the code letter for the required lead length or packing.  
000 = lead length 6 mm (untaped)  
026 = lead length 26 mm (untaped)  
289 = taped, Ammo pack  
189 = taped, reel  
254 12/00  
 
B 81 122  
250 Vac  
Y2  
Technical data  
Climatic category  
in accordance with IEC 60068-1  
40/100/21 (  
40/085/21 (  
= 10 mm, MKT)  
15 mm, MKP)  
Lower category temperature Tmin  
40 °C  
Upper category temperature Tmax + 100 °C or + 85 °C  
Passive flammability category  
in accordance with IEC 40 (CO) 752 C  
Damp heat test  
21 days/40 °C/93 % relative humidity  
Capacitance change |C/C| 5 % (  
3 % (  
Dissipation factor change tan δ for = 10 mm:  
5 103 (at 1 kHz)  
for (  
Limit values after damp  
heat test  
= 10 mm)  
15 mm)  
15 mm):  
0,5 103 (at 1 kHz)  
1,0 103 (at 10 kHz)  
Insulation resistance Ris  
50 % of minimum  
or time constant τ = CR Ris  
as-delivered values  
Permissible  
continuous ac voltage  
450 V (50/60 Hz) (  
15 mm)  
= 10 mm)  
275 V (50/60 Hz) (  
Permissible continuous dc voltage 1000 V (  
1200 V (  
15 mm)  
= 10 mm)  
DC test voltage  
2700 V, 2s (  
15 mm)  
= 10 mm)  
2500 V, 2 s (  
Dissipation factor tan δ (in 103  
at 20 °C  
(upper limit values)  
)
CR 0,1 µF CR > 0,1 µF  
Lead spacing  
= 10 mm  
8
at  
1 kHz  
10 kHz 15  
100 kHz 30  
Lead spacing  
15mm  
at  
1 kHz  
0,5  
0,8  
10 kHz –  
100 kHz 5  
Insulation resistance Ris  
30 000 MΩ  
or time constant τ = CR Ris  
at 20 °C, rel. humidity 65 %  
(minimum as-delivered values)  
255 12/00  
Y2  
B 81 122  
250 Vac  
Technical data  
Impedance Z  
versus frequency f  
(typical values)  
Lead spacing = 10 mm  
Lead spacing 15 mm  
Pulse handling capability  
Maximum permissible voltage change per unit of time for non-sinusoidal voltages (pulse, sawtooth).  
Max. rate of voltage rise Vpp/τ in V/µs (for Vpp =VˆR)  
Lead spacing  
R = 250 Vac  
10 mm  
15 mm  
22,5 mm  
27,5 mm  
125  
V
400  
450  
200  
For Vpp < VˆR, the permissible voltage rise rate Vpp/τ may be multiplied by the factor VˆR/Vpp  
Also refer to the calculation example in chapter “General technical information”, page 302.  
.
Pulse characteristic k0 in V2/µs (for Vpp VˆR)  
Lead spacing  
R = 250 Vac  
10 mm  
15 mm  
22,5 mm  
27,5 mm  
90 000  
V
280 000  
310 000  
140 000  
256 12/00  
Herausgegeben von EPCOS AG  
Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND  
EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfältigung, Veröffentlichung, Verbreitung und  
Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG  
nicht gestattet.  
Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften  
zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen  
für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.  
Diese Broschüre ersetzt die vorige Ausgabe.  
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgele-  
genen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland.  
Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte  
darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsge-  
sellschaft einzuholen.  
Published by EPCOS AG  
Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY  
EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this bro-  
chure and the information contained therein without EPCOSprior express consent is prohibited.  
The information contained in this brochure describes the type of component and shall not be con-  
sidered as guaranteed characteristics. Purchase orders are subject to the General Conditions for  
the Supply of Products and Services of the Electrical and Electronics Industry recommended by the  
ZVEI (German Electrical and Electronic ManufacturersAssociation), unless otherwise agreed.  
This brochure replaces the previous edition.  
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or  
the international Representatives.  
Due to technical requirements components may contain dangerous substances. For information on  
the type in question please also contact one of our Sales Offices.  
1

相关型号:

B81122A1103M

EMI suppression capacitors (MKP) Y2 / 250 VAC
EPCOS

B81122A1103M189

Film Capacitor, Polypropylene, 1000V, 20% +Tol, 20% -Tol, 0.01uF, Through Hole Mount, 7124, RADIAL LEADED, LEAD FREE
EPCOS

B81122A1103M289

Film Capacitor, Polypropylene, 1000V, 20% +Tol, 20% -Tol, 0.01uF, Through Hole Mount, 7124, RADIAL LEADED, LEAD FREE
EPCOS

B81122A1104M

EMI suppression capacitors (MKP) Y2 / 250 VAC
EPCOS

B81122A1104M000

Film Capacitor, Polypropylene, 1000V, 20% +Tol, 20% -Tol, 0.1uF, Through Hole Mount, RADIAL LEADED, LEAD FREE
EPCOS

B81122A1104M189

Film Capacitor, Polypropylene, 1000V, 20% +Tol, 20% -Tol, 0.1uF, Through Hole Mount, RADIAL LEADED, LEAD FREE
EPCOS

B81122A1153M

EMI suppression capacitors (MKP) Y2 / 250 VAC
EPCOS

B81122A1153M000

Film Capacitor, Polypropylene, 1000V, 20% +Tol, 20% -Tol, 0.015uF, Through Hole Mount, 7128, RADIAL LEADED, LEAD FREE
EPCOS

B81122A1153M189

Film Capacitor, Polypropylene, 1000V, 20% +Tol, 20% -Tol, 0.015uF, Through Hole Mount, 7128, RADIAL LEADED, LEAD FREE
EPCOS

B81122A1153M289

Film Capacitor, Polypropylene, 1000V, 20% +Tol, 20% -Tol, 0.015uF, Through Hole Mount, 7128, RADIAL LEADED, LEAD FREE
EPCOS

B81122A1154M

EMI suppression capacitors (MKP) Y2 / 250 VAC
EPCOS

B81122A1154M000

Film Capacitor, Polypropylene, 1000V, 20% +Tol, 20% -Tol, 0.15uF, Through Hole Mount, RADIAL LEADED, LEAD FREE
EPCOS