B5151 [EPCOS]
SAW RF filter TETRA; SAW RF滤波器TETRA
| 型号： | B5151 |
| 厂家： | 
EPCOS |
| 描述： | SAW RF filter TETRA |
| 文件： | 总13页 (文件大小：149K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SAW Components
SAW RF filter
TETRA
Series/type:
B5151
Ordering code:
B39421B5151U310
Date:
Version:
September 27, 2010
1.0
EPCOS AG 2010. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SAW Components
SAW RF filter
B5151
390.00 / 415.00 MHz
Sample data
Revision History: Changes compared to previous iteration issue
ISSUE
ORIGINATOR DETAIL SPEC CHANGES
DATE
DGLV69S01
0.1
Kok Meng
Initial Release
13.02.2009
08.04.2009
LV69A
1.0
Kok Meng
Filter shifted high by 0.8MHz
Updates of attenuation spec for Filter I
Relaxation of IL for Filter 2 to 3.5dB
Relaxation of AR for Filter 2 to 2.2dB
Relaxation of VSWR for Filter 2 to 2.2
Updates of attenuation spec for Filter 2
DGLV69S02
0.2
Kok Meng
Change in customer spec for IL and attenuation 03.06.2009
LV69B
1.0
Kok Meng
With reference to DGLV69S02,
28.08.2009
Relaxation of IL for Filter I to 2.3dB
Improvement of AR for Filter I to 0.9dB
Updates of attenaution spec for Filter I
Relaxation of IL for Filter 2 to 2.7dB
Improvement of AR for Filter 2 to 1.3dB
Relaxation of Input VSWR for Filter 2 to 2.1
Updates of attenuation spec for Filter 2
B5151
1.0
Kok Meng
Include ordering code
27.09.2010
Please read cautions and warnings and
important notes at the end of this document.
2
September 27, 2010
SAW Components
SAW RF filter
B5151
390.00 / 415.00 MHz
Sample data
Application
■ Low-loss RF filter for TETRA
■ Low amplitude ripple
■ Usable passband:
Filter 1 : 20 MHz
Filter 2 : 30 MHz
■ Unbalanced to unbalanced operation
■ No matching required for operation at 50 Ω
Features
■ Package size 5.0 x 5.0 x 1.35 mm3
■ Package code QCC8C
■ RoHS compatible
■ Approximate weight 0.10 g
■ Package for Surface Mount Technology (SMT)
■ Ni, gold-plated terminals
■ Electrostatic Sensitive Device (ESD)
Pin configuration
■ 1
■ 3
■ 7
■ 5
■ 2,6
■ 4,8
Input [Filter 1]
Input [Filter 2]
Output [Filter 1]
Output [Filter 2]
To be grounded
Case ground
Please read cautions and warnings and
important notes at the end of this document.
3
September 27, 2010
SAW Components
SAW RF filter
B5151
390.00 / 415.00 MHz
Sample data
Characteristics of Filter 1
Temperature range for specification:
Terminating source impedance:
Terminating load impedance:
T = -30 to +70˚C
ZS = 50 Ω
ZL = 50 Ω
LV69B 1)
DGL 2)
min.
typ.
@ 25 ˚C
390.0
max.
min./
max.
Center frequency
fC
—
—
MHz
dB
Maximum insertion attenuation
αmax
380.0 ... 400.0 MHz
—
—
—
—
1.8
0.4
1.7
1.7
2.3
Amplitude ripple (p-p)
∆α
380.0 ... 400.0 MHz
0.9
2.0
2.0
dB
Input VSWR
380.0 ... 400.0 MHz
Output VSWR
380.0 ... 400.0 MHz
Attenuation
α
10.0 ... 150.0 MHz
150.0 ... 287.0 MHz
287.0 ... 335.0 MHz
335.0 ... 360.0 MHz
418.0 ... 442.0 MHz
442.0 ... 456.0 MHz
456.0 ... 532.0 MHz
532.0 ... 560.0 MHz
560.0 ... 668.0 MHz
668.0 ... 1000.0 MHz
35
33
26
20
15
25
28
28
22
22
42
37
29
23
21
33
36
32
24
31
—
—
—
—
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
1)
Values in columns min, typ and max indicate the development status of the current version.
Values in column DesignGoal (DGL) indicate the target performance.
2)
Please read cautions and warnings and
important notes at the end of this document.
4
September 27, 2010
SAW Components
SAW RF filter
B5151
390.00 / 415.00 MHz
Sample data
Maximum ratings of Filter 1
Operable temperature range T
Storage temperature range Tstg
-40 / +85 ˚C
-40 / +85 ˚C
DC voltage
VDC
0
V
V
100 1)
machine model, 1 pulse
continuous wave
ESD voltage
VESD
Input Power at
380.0 ... 400.0 MHz
PIN
15
dBm
1)
acc. to JESD22-A115A (machine model), 1 negative & 1 positive pulse.
Please read cautions and warnings and
important notes at the end of this document.
5
September 27, 2010
SAW Components
SAW RF filter
B5151
390.00 / 415.00 MHz
Sample data
Transfer function of Filter 1
Transfer function (wideband)
Please read cautions and warnings and
important notes at the end of this document.
6
September 27, 2010
SAW Components
SAW RF filter
B5151
390.00 / 415.00 MHz
Sample data
Smith charts of Filter 1
S11 function
S22 function
Please read cautions and warnings and
important notes at the end of this document.
7
September 27, 2010
SAW Components
SAW RF filter
B5151
390.00 / 415.00 MHz
Sample data
Characteristics of Filter 2
Temperature range for specification:
Terminating source impedance:
Terminating load impedance:
T = -30 to +70˚C
ZS = 50 Ω
ZL = 50 Ω
LV69B 1)
DGL 2)
min.
typ.
@ 25 ˚C
415.0
max.
min./
max.
Center frequency
fC
—
—
MHz
dB
Maximum insertion attenuation
αmax
400.0 ... 430.0 MHz
—
—
—
2.2
0.8
1.7
2.7
Amplitude ripple (p-p)
∆α
400.0 ... 430.0 MHz
1.3
2.1
dB
Input VSWR
400.0 ... 430.0 MHz
Output VSWR
400.0 ... 430.0 MHz
—
1.7
2.0
Attenuation
α
10.0 ... 345.0 MHz
345.0 ... 390.0 MHz
440.0 ... 470.0 MHz
470.0 ... 480.0 MHz
480.0 ... 561.0 MHz
561.0 ... 593.0 MHz
593.0 ... 950.0 MHz
950.0 ... 2000.0 MHz
2000.0 ... 2500.0 MHz
25
9
4
25
27
28
21
13
5
29
11
7
30
34
31
23
16
8
—
—
—
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
dB
dB
dB
1)
Values in columns min, typ and max indicate the development status of the current version.
Values in column DesignGoal (DGL) indicate the target performance.
2)
Please read cautions and warnings and
important notes at the end of this document.
8
September 27, 2010
SAW Components
SAW RF filter
B5151
390.00 / 415.00 MHz
Sample data
Maximum ratings of Filter 2
Operable temperature range T
Storage temperature range Tstg
-40 / +85 ˚C
-40 / +85 ˚C
DC voltage
VDC
0
V
V
100 1)
machine model, 1 pulse
continuous wave
ESD voltage
VESD
Input Power at
400.0 ... 430.0 MHz
PIN
15
dBm
1)
acc. to JESD22-A115A (machine model), 1 negative & 1 positive pulse.
Please read cautions and warnings and
important notes at the end of this document.
9
September 27, 2010
SAW Components
SAW RF filter
B5151
390.00 / 415.00 MHz
Sample data
Transfer function of Filter 2
Transfer function (wideband)
Please read cautions and warnings and
important notes at the end of this document.
10 September 27, 2010
SAW Components
SAW RF filter
B5151
390.00 / 415.00 MHz
Sample data
Smith charts of Filter 2
S11 function
S22 function
Please read cautions and warnings and
important notes at the end of this document.
11 September 27, 2010
SAW Components
SAW RF filter
B5151
390.00 / 415.00 MHz
Sample data
References
Type
B5151
Ordering code
Marking and package
Packaging
B39421B5151U310
C61157-A7-A56
F61074-V8169-Z000
L_1126
Date codes
LV69B_NB.s2p
LV69B_WB.s2p
S-parameters
see file header for port/pin assignment table
Soldering profile
RoHS compatible
S_6001
defined as compatible with the following documents:
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on the restriction
of the use of certain hazardous substances in electrical and
electronic equipment. 2005/618/EC from April 18th, 2005,
amending Directive 2002/95/EC of the European Parliament
and of the Council for the purposes of establishing the maxi-
mum concentration values for certain hazardous substances in
electrical and electronic equipment."
Matching coils
See Inductor pdf-catalog
http://www.tdk.co.jp/tefe02/coil.htm#aname1
and Data Library for circuit simulation
http://www.tdk.co.jp/etvcl/index.htm
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Surface Acoustic Wave Components Division
P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2010. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
12 September 27, 2010
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Conse-
quently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap,
DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC,
PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD,
SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on
the Internet at www.epcos.com/trademarks.
13 September 27, 2010
相关型号：
©2020 ICPDF网 联系我们和版权申明