B5109 [EPCOS]

SAW filter Base-station RF; SAW滤波器中相应站射频
B5109
型号: B5109
厂家: EPCOS    EPCOS
描述:

SAW filter Base-station RF
SAW滤波器中相应站射频

射频
文件: 总8页 (文件大小:91K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
SAW Components  
SAW filter  
Base-station RF  
Series/type:  
B5109  
Ordering code:  
B39172B5109U410  
Date:  
Version:  
December 23, 2008  
2.0  
EPCOS AG 2008. Reproduction, publication and dissemination of this data sheet, enclosures  
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.  
SAW Components  
SAW filter  
B5109  
1732.50 MHz  
Data sheet  
Application  
Low-loss base-station RF filter  
Low amplitude ripple  
No matching required for operation at 50  
Usable passband 45 MHz  
Features  
Package size 3.0 x 3.0 x 1.1 mm3  
Package code DCC6C  
RoHS compatible  
Approximate weight 0.037 g  
Package for Surface Mount Technology (SMT)  
Ni, gold-plated terminals  
Electrostatic Sensitive Device (ESD)  
Pin configuration  
2  
5  
Input unbalanced  
Output unbalanced  
1,3,4,6 To be grounded  
Please read cautions and warnings and  
important notes at the end of this document.  
2
December 23, 2008  
SAW Components  
SAW filter  
B5109  
1732.50 MHz  
Data sheet  
Characteristics  
Temperature range for specification:  
Terminating source impedance:  
Terminating load impedance:  
T
ZS  
ZL  
= –40 ˚C to +85 ˚C  
=
=
50 Ω  
50 Ω  
min.  
typ.  
max.  
@ 25 ˚C  
1732.50  
Center frequency  
fC  
45  
MHz  
Minimum insertion attenuation  
αmin  
fC ± 22.5 MHz  
1.7  
2.2  
62  
2.5  
3.5  
dB  
Maximum insertion attenuation  
fC ± 22.5 MHz  
αmax  
dB  
Passband width  
αrel 1.8 dB  
B1.8dB  
MHz  
dB  
Amplitude ripple (p-p)  
∆α  
fC ± 22.5 MHz  
0.5  
1.8  
VSWR  
Input  
fC ± 22.5 MHz  
fC ± 22.5 MHz  
1.7:1  
1.5:1  
2.0:1  
2.0:1  
Output  
Relative attenuation (relative to αmin  
)
αrel  
10 ... 1680 MHz  
1680 ... 1690 MHz  
1690 ... 1694 MHz  
1771 ... 1778 MHz  
1778 ... 1785 MHz  
1785 ... 1805 MHz  
1805 ... 1850 MHz  
1850 ... 1880 MHz  
1880 ... 3200 MHz  
3200 ... 5200 MHz  
20  
4
1.5  
1.5  
5
10  
25  
30  
20  
4
23  
10  
6.0  
9.5  
22  
28  
28  
33  
27  
7
dB  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
Please read cautions and warnings and  
important notes at the end of this document.  
3
December 23, 2008  
SAW Components  
SAW filter  
B5109  
1732.50 MHz  
Data sheet  
Maximum ratings  
Operable temperature range T  
Storage temperature range Tstg  
–40/+85 ˚C  
–40/+85 ˚C  
DC voltage  
VDC  
0
V
V
V
machine model, 1 pulse  
ESD voltage  
VESD  
VESD  
501)  
2252)  
human body model, 1 pulse  
Input power  
CW  
1710 ... 1755 MHz  
PIN  
10  
dBm  
1)  
acc. to JESD22-A115A (machine model), 1 negative & 1 positive pulse.  
acc. to JESD22-A114B (human body model), 1 negative & 1 positive pulse.  
2)  
Please read cautions and warnings and  
important notes at the end of this document.  
4
December 23, 2008  
SAW Components  
SAW filter  
B5109  
1732.50 MHz  
Data sheet  
Transfer function  
Transfer function (wideband)  
Please read cautions and warnings and  
important notes at the end of this document.  
5
December 23, 2008  
SAW Components  
SAW filter  
B5109  
1732.50 MHz  
Data sheet  
Smith charts  
S11 function  
S22 function  
Please read cautions and warnings and  
important notes at the end of this document.  
6
December 23, 2008  
SAW Components  
SAW filter  
B5109  
1732.50 MHz  
Data sheet  
References  
Type  
B5109  
Ordering code  
Marking and package  
Packaging  
B39172B5109U410  
C61157-A7-A67  
F61074-V8168-Z000  
L_1126  
Date codes  
B5109_NB.s2p  
S-parameters  
B5109_WB.s2p  
See file header for port/pin assignment table  
Soldering profile  
RoHS compatible  
S_6001  
defined as compatible with the following documents:  
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT  
AND OF THE COUNCIL of 27 January 2003 on the restriction  
of the use of certain hazardous substances in electrical and  
electronic equipment. 2005/618/EC from April 18th, 2005,  
amending Directive 2002/95/EC of the European Parliament  
and of the Council for the purposes of establishing the maxi-  
mum concentration values for certain hazardous substances in  
electrical and electronic equipment."  
For further information please contact your local EPCOS sales office or visit our webpage at  
www.epcos.com .  
Published by EPCOS AG  
Surface Acoustic Wave Components Division  
P.O. Box 80 17 09, 81617 Munich, GERMANY  
EPCOS AG 2008. This brochure replaces the previous edition.  
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or  
the international Representatives.  
Due to technical requirements components may contain dangerous substances. For information on  
the type in question please also contact one of our Sales Offices.  
Please read cautions and warnings and  
important notes at the end of this document.  
7
December 23, 2008  
Important notes  
The following applies to all products named in this publication:  
1. Some parts of this publication contain statements about the suitability of our products for  
certain areas of application. These statements are based on our knowledge of typical  
requirements that are often placed on our products in the areas of application concerned. We  
nevertheless expressly point out that such statements cannot be regarded as binding  
statements about the suitability of our products for a particular customer application.  
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar  
with them than the customers themselves. For these reasons, it is always ultimately incum-  
bent on the customer to check and decide whether an EPCOS product with the properties  
described in the product specification is suitable for use in a particular customer application.  
2. We also point out that in individual cases, a malfunction of electronic components or  
failure before the end of their usual service life cannot be completely ruled out in the  
current state of the art, even if they are operated as specified. In customer applications  
requiring a very high level of operational safety and especially in customer applications in  
which the malfunction or failure of an electronic component could endanger human life or  
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by  
means of suitable design of the customer application or other action taken by the customer  
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained  
by third parties in the event of malfunction or failure of an electronic component.  
3. The warnings, cautions and product-specific notes must be observed.  
4. In order to satisfy certain technical requirements, some of the products described in this  
publication may contain substances subject to restrictions in certain jurisdictions (e.g.  
because they are classed as hazardous). Useful information on this will be found in our  
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more  
detailed questions, please contact our sales offices.  
5. We constantly strive to improve our products. Consequently, the products described in this  
publication may change from time to time. The same is true of the corresponding product  
specifications. Please check therefore to what extent product descriptions and specifications  
contained in this publication are still applicable before or when you place an order.  
We also reserve the right to discontinue production and delivery of products. Conse-  
quently, we cannot guarantee that all products named in this publication will always be avail-  
able. The aforementioned does not apply in the case of individual agreements deviating from  
the foregoing for customer-specific products.  
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-  
sion of the “General Terms of Delivery for Products and Services in the Electrical  
Industry” published by the German Electrical and Electronics Industry Association  
(ZVEI).  
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK,  
MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIM-  
DAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks reg-  
istered or pending in Europe and in other countries. Further information will be found on the  
Internet at www.epcos.com/trademarks.  
8
December 23, 2008  

相关型号:

B511

Eight Circuits to Choose from
CRYDOM

B511-2

MOD DIODE SCR 25A 120VAC ISO QC
ETC

B511-2T

Silicon Controlled Rectifier, 400V V(RRM), 2 Element, MODULE-6
CYNERGY3

B511-2T

Silicon Controlled Rectifier, 27000mA I(T), 400V V(RRM), 2 Element, ROHS COMPLIANT PACKAGE-6
CRYDOM

B5110

SAW filter Base-station RF
EPCOS

B5113

SAW RF filter Basestation
EPCOS

B5114

SAW filter RF Base Station
EPCOS

B5115

SAW filter WCDMA/UMTS Band VII
EPCOS

B5116

SAW filter RF Base Station
EPCOS

B5117

SAW RF filter Basestation
EPCOS

B5118

SAW filter RF Base Station
EPCOS

B511E2T

THYRISTOR MODULE|BRIDGE|HALF-CNTLD|CC|120V V(RRM)|27A I(T)
ETC