B43693A1207Q001 [EPCOS]
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID;型号: | B43693A1207Q001 |
厂家: | EPCOS |
描述: | CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID 电容器 |
文件: | 总15页 (文件大小:421K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Aluminum electrolytic capacitors
Axial-lead and soldering star capacitors
Series/Type:
B43693, B43793
Date:
November 2012
© EPCOS AG 2012. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Axial-lead and soldering star capacitors
B43693, B43793
High voltage ꢀ 125 °C
Applications
Automotive electronics
Features
High voltage design
High ripple current capability
Long useful life
High vibration stability
RoHS-compatible
Construction
Charge/discharge-proof, polar
Aluminum case with insulating sleeve
Negative pole connected to case
Terminals
Axial leads, welded to ensure perfect electrical contact
Soldering star for upright mounting on PCB available
Alternative axial-lead design with double-sided plates for
horizontal mounting available upon request
Taping and packing
Axial-lead capacitors will be delivered in pallet package
Capacitors with d × l ≤ 16 × 30 mm are also available taped
on reel
Soldering star capacitors are packed in cardboard
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 15
B43693, B43793
High voltage ꢀ 125 °C
Specifications and characteristics in brief
Rated voltage VR
Surge voltage VS
160 ... 250 V DC
1.15 ꢁ VR
Rated capacitance CR 22 ... 130 µF
Capacitance tolerance ꢀ10/+30% ꢂ Q
Leakage current Ileak
(5 min, 20 °C)
Self-inductance ESL1) Diameter d (mm)
14
18
21
Terminals
axial
Length l (mm) Approx. ESL (nH)
30
39
49
30
39
49
24
ꢀ
ꢀ
7
34
38
ꢀ
ꢀ
45
50
ꢀ
soldering star
10
11
ꢀ
ꢀ
ꢀ
13
14
Useful life2)
Requirements:
125 °C; VR; IAC,R
105 °C; VR; IAC,R
85 °C; VR; IAC,max
40 °C; VR; 2 ꢁ IAC,R
> 2500 h
∆C/C ≤ ±30% of initial value
ESR ≤ 3 times initial specified limit3)
> 10000 h
> 4000 h
Ileak
≤ initial specified limit
> 250000 h
Voltage endurance test
Post test requirements:
105 °C; VR
5000 h
∆C/C ≤ ±10% of initial value
ESR ≤ 1.3% of initial specified limit3)
Ileak
≤ initial specified limit
Vibration resistance
test
To IEC 60068-2-6, test Fc:
Frequency range 10 Hz ... 2 kHz, displacement amplitude max. 1.5 mm,
acceleration max. 20 g, duration 3 × 2 h.
Capacitor mounted by its wire leads at a distance of (6 ±1) mm from the
case and additionally clamped by the case.
IEC climatic category
Detail specification
To IEC 60068-1:
40/125/56 (ꢀ40 °C/+125 °C/56 days damp heat test)
Similar to CECC 30301-802
Sectional specification IEC 60384-4
1) If optimum circuit design is used, the values are lower by 30%.
2) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life.
3) ESRmax at 100 Hz, 20 °C
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 15
B43693, B43793
High voltage ꢀ 125 °C
B43693, Axial-lead capacitors
Dimensional drawing
Dimensions, weights and packing units
d × l
dmax × Imax
Approx. weight
Packing units (pcs.)
mm
mm
g
Pallet
200
160
160
140
110
Reel
350
ꢀ
14 × 30
18 × 30
18 × 39
21 × 39
21 × 49
14.5 × 30.5
18.5 × 30.5
18.5 × 40
21.5 × 40
21.5 × 50
6.8
11.1
14.7
20.0
25.0
ꢀ
ꢀ
ꢀ
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 15
B43693, B43793
High voltage ꢀ 125 °C
B43793, Soldering star capacitors
Dimensional drawings
Mounting holes d = 14 mm
Mounting holes d = 16 mm ... 21 mm
Dimensions, weights and packing units
d × l
d
max × Imax
c ±0.1
mm
e ±0.1
mm
3.0
Approx. weight Packing units
mm
mm
g
pcs.
480
300
200
324
264
14 × 30
18 × 30
18 × 39
21 × 39
21 × 49
15.5 × 32
19.5 × 32
19.5 × 41.5
22.5 × 41.5
22.5 × 51.5
14.5
18.5
18.5
21.5
21.5
7.2
3.0
11.8
15.4
21.0
26.0
3.0
3.5
3.5
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 15
B43693, B43793
High voltage ꢀ 125 °C
Case dimensions and ordering codes
VR
CR
100 Hz
20 °C
Case
Ordering code
Ordering code
Axial reel
Ordering code
Soldering star
dimensions Axial pallet
d × l
V DC µF
mm
160
200
250
68
14 × 30
18 × 30
18 × 39
21 × 39
21 × 49
14 × 30
18 × 30
18 × 39
21 × 39
21 × 49
14 × 30
18 × 30
18 × 39
21 × 39
21 × 49
B43693A1686Q001 B43693A1686Q003 B43793A1686Q001
130
200
300
400
47
100
150
200
270
22
B43693A1137Q001
B43693A1207Q001
B43693A1307Q001
B43693A1407Q001
B43793A1137Q001
B43793A1207Q001
B43793A1307Q001
B43793A1407Q001
B43693B2476Q001 B43693B2476Q003 B43793B2476Q001
B43693B2107Q001
B43693A2157Q001
B43693A2207Q001
B43693A2307Q001
B43793B2107Q001
B43793A2157Q001
B43793A2207Q001
B43793A2307Q001
B43693A2226Q001 B43693A2226Q003 B43793A2226Q001
47
68
100
130
B43693A2476Q001
B43693A2686Q001
B43693A2107Q001
B43693A2137Q001
B43793A2476Q001
B43793A2686Q001
B43793A2107Q001
B43793A2137Q001
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 15
B43693, B43793
High voltage ꢀ 125 °C
Technical data
CR Case
ESRmax ESRmax ESRmax Zmax
IAC,max
IAC,max
IAC,R
IAC,max
100 Hz dimensions 100 Hz 100 Hz 10 kHz 100 kHz 10 kHz 10 kHz 10 kHz 10 kHz
20 °C
µF
d × l
mm
20 °C
mΩ
ꢀ40 °C 20 °C
20 °C
mΩ
40 °C
A
105 °C 105 °C 125 °C
Ω
mΩ
A
A
A
VR = 160 V DC
68
130
200
300
400
14 × 30
1050
570
370
250
190
25
13
8
6
4
440
240
160
105
77
450
250
165
110
80
3.68
5.2
7.2
10.05
12.9
2.95
4.15
5.75
8.10
10.40
1.2
1.7
2.35
3.3
4.25
2.3
3.25
4.5
6.25
8.0
18 × 30
18 × 39
21 × 39
21 × 49
VR = 200 V DC
47
100
150
200
270
14 × 30
1400
680
450
330
250
32
15
10
7.5
5.5
500
240
160
120
90
510
250
165
123
93
3.4
5.05
6.95
9.3
2.72
4.00
5.60
7.45
9.60
1.12
1.65
2.30
3.05
3.95
2.13
3.15
4.33
5.8
18 × 30
18 × 39
21 × 39
21 × 49
12.0
7.5
VR = 250 V DC
22
47
68
100
130
14 × 30
2300
1100
750
520
400
34.0
16.0
11.0
7.5
454
222
154
102
79
510
246
171
114
88
3.65
5.43
7.36
10.16
12.89
2.90
4.35
5.90
8.15
10.35
1.20
1.78
2.41
3.33
4.23
2.27
3.38
4.58
6.33
8.03
18 × 30
18 × 39
21 × 39
21 × 49
6.0
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 15
B43693, B43793
High voltage ꢀ 125 °C
Useful life1)
depending on ambient temperature TA under ripple current operating conditions at VR
Useful life1)
1)
depending on case temperature TC under ripple current operating conditions at VR
1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 15
B43693, B43793
High voltage ꢀ 125 °C
Frequency factor of permissible ripple
current IAC versus frequency f
Equivalent series resistance ESR
versus frequency f
Typical behavior for 47 µF/250 V
Frequency characteristics of ESR
Frequency characteristics of ESR
Typical behavior for 160 and 200 V
Typical behavior for 250 V
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 15
B43693, B43793
High voltage ꢀ 125 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have been optimized both with a view to the intended
application and with regard to health and environmental compatibility. They do not contain any
solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no alternative materials are currently
known. However, the amount of dangerous materials used in our products is limited to an
absolute minimum.
Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously
adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU
regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV.
MDS (Material Data Sheets) are available on the EPCOS website for all types listed in the data
book. MDS for customer specific capacitors are available upon request.
MSDS (Material Safety Data Sheets) are available for all of our electrolytes upon request.
Nevertheless, the following rules should be observed when handling aluminum electrolytic
capacitors: No electrolyte should come into contact with eyes or skin. If electrolyte does come
into contact with the skin, wash the affected areas immediately with running water. If the eyes are
affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical
treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should
be well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 15
B43693, B43793
High voltage ꢀ 125 °C
Product safety
The table below summarizes the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Safety information
Reference
chapter "General
technical information"
Polarity
Make sure that polar capacitors are connected
with the right polarity.
1
"Basic construction of
aluminum electrolytic
capacitors"
Reverse voltage
Voltages polarity classes should be prevented by 3.1.6
connecting a diode.
"Reverse voltage"
Mounting
position of screw-
terminal capacitors
Do not mount the capacitor with the terminals
(safety vent) upside down.
11.1.
"Mounting positions of
capacitors with screw
terminals"
Robustness of
terminals
The following maximum tightening torques must
not be exceeded when connecting screw
11.3
"Mounting torques"
terminals:
M5: 2.5 Nm
M6: 4.0 Nm
Mounting of
single-ended
capacitors
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
Soldering
Do not exceed the specified time or temperature 11.5
limits during soldering.
"Soldering"
Soldering,
Do not allow halogenated hydrocarbons to come 11.6
cleaning agents
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Upper category
temperature
Do not exceed the upper category temperature.
7.2
"Maximum permissible
operating temperature"
Passive
Avoid external energy, such as fire or electricity.
8.1
flammability
"Passive flammability"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 15
B43693, B43793
High voltage ꢀ 125 °C
Topic
Safety information
Reference
chapter "General
technical information"
Active
flammability
Avoid overload of the capacitors.
Make periodic inspections of the capacitors.
8.2
"Active flammability"
Maintenance
10
Before the inspection, make sure that the power "Maintenance"
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Storage
Do not store capacitors at high temperatures or
high humidity. Capacitors should be stored at
+5 to +35 °C and a relative humidity of ≤ 75%.
7.3
Storage conditions
Reference
chapter "Capacitors with
screw terminals"
Breakdown strength Do not damage the insulating sleeve, especially
"Screw terminals ꢀ
of insulating
sleeves
when ring clips are used for mounting.
accessories"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 15
B43693, B43793
High voltage ꢀ 125 °C
Symbols and terms
Symbol English
German
C
Capacitance
Kapazität
CR
Rated capacitance
Nennkapazität
CS
Series capacitance
Serienkapazität
CS,T
Cf
Series capacitance at temperature T
Capacitance at frequency f
Case diameter, nominal dimension
Maximum case diameter
Self-inductance
Serienkapazität bei Temperatur T
Kapazität bei Frequenz f
Gehäusedurchmesser, Nennmaß
Maximaler Gehäusedurchmesser
Eigeninduktivität
d
dmax
ESL
ESR
ESRf
Equivalent series resistance
Equivalent series resistance at
frequency f
Ersatzserienwiderstand
Ersatzserienwiderstand bei Frequenz f
ESRT
Equivalent series resistance at
temperature T
Ersatzserienwiderstand bei Temperatur T
f
Frequency
Frequenz
I
Current
Strom
IAC
Alternating current (ripple current)
Root-mean-square value of alternating
current
Wechselstrom
Wechselstrom, Effektivwert
IAC,rms
IAC,f
Ripple current at frequency f
Maximum permissible ripple current
Rated ripple current
Wechselstrom bei Frequenz f
Maximal zulässiger Wechselstrom
Nennwechselstrom
IAC,max
IAC,R
IAC,R (B) Rated ripple current for base cooling
Nennwechselstromstrom für Bodenkühlung
Reststrom
Ileak
Ileak,op
l
Leakage current
Operating leakage current
Case length, nominal dimension
Maximum case length (without
terminals and mounting stud)
Resistance
Betriebsreststrom
Gehäuselänge, Nennmaß
Maximale Gehäuselänge (ohne Anschlüsse
und Gewindebolzen)
Widerstand
lmax
R
Rins
Rsymm
T
Insulation resistance
Balancing resistance
Temperature
Isolationswiderstand
Symmetrierwiderstand
Temperatur
∆T
TA
TC
TB
t
Temperature difference
Ambient temperature
Case temperature
Temperaturdifferenz
Umgebungstemperatur
Gehäusetemperatur
Capacitor base temperature
Time
Temperatur des Becherbodens
Zeit
∆t
Period
Zeitraum
tb
Service life (operating hours)
Brauchbarkeitsdauer (Betriebszeit)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 15
B43693, B43793
High voltage ꢀ 125 °C
Symbol English
German
V
Voltage
Spannung
VF
Vop
VR
VS
XC
XL
Z
Forming voltage
Formierspannung
Operating voltage
Rated voltage, DC voltage
Surge voltage
Betriebsspannung
Nennspannung, Gleichspannung
Spitzenspannung
Capacitive reactance
Inductive reactance
Impedance
Kapazitiver Blindwiderstand
Induktiver Blindwiderstand
Scheinwiderstand
ZT
tan δ
λ
Impedance at temperature T
Dissipation factor
Scheinwiderstand bei Temperatur T
Verlustfaktor
Failure rate
Ausfallrate
ε0
Absolute permittivity
Relative permittivity
Angular velocity; 2 ꢁ π ꢁ f
Elektrische Feldkonstante
Dielektrizitätszahl
εr
ω
Kreisfrequenz; 2 ꢁ π ꢁ f
Note
All dimensions are given in mm.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 15
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Ma-
terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-
tailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the fore-
going for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the "General Terms of Delivery for Products and Services in the Electrical In-
dustry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse,
WindCap are trademarks registered or pending in Europe and in other countries. Further
information will be found on the Internet at www.epcos.com/trademarks.
Page 15 of 15
相关型号:
B43693A2476Q000
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 250V, 47uF, THROUGH HOLE MOUNT
EPCOS
©2020 ICPDF网 联系我们和版权申明