B43510B0687M000 [EPCOS]
Aluminum electrolytic capacitors; 铝电解电容器型号: | B43510B0687M000 |
厂家: | EPCOS |
描述: | Aluminum electrolytic capacitors |
文件: | 总19页 (文件大小:824K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Aluminum electrolytic capacitors
Capacitors with 4-pin snap-in terminals and solder
pins
Series/Type:
B43510, B43520
Date:
November 2008
© EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Capacitors with 4-pin snap-in terminals and solder pins
B43510, B43520
Compact ꢁ 85 °C
Long-life grade capacitors
Applications
Frequency converters
Switch-mode power supplies in industrial and consumer
electronics
Uninterruptible power supplies
Features
B43510
B43520
Voltage derating (0.88 ꢀ VR) enables 105 °C operation,
more details available upon request
Extremely high volumetric efficiency
High ripple current capability
Many different case sizes
Pinning ensures correct insertion
RoHS-compatible
Construction
Charge/discharge-proof, polar
Aluminum case, fully insulated with PVC
Version with additional PET insulation cap on terminal side
available for insulating the capacitor from the PCB (B43510
only)
Overload protection by safety vent in case
Terminals
4-pin snap-in terminals (6.3 mm and 4.5 mm length)
Solder pin mounting on printed circuit boards, pins fit
standardized spacings on PCB
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 19
B43510, B43520
Compact ꢁ 85 °C
Specifications and characteristics in brief
Rated voltage VR
Surge voltage VS
385 ... 500 V DC
1.1 ꢀ VR
Rated capacitance CR 390 ... 2700 µF
Capacitance tolerance ±20% ꢂ M
Leakage current Ileak
(5 min, 20 °C)
Self-inductance ESL
Useful life
Approx. 20 nH
> 5000 h
Requirements:
∆C/C ≤ ±30% of initial value
85 °C; VR; IAC,R
40 °C; VR; 1.1 ꢀ IAC,R
> 250000 h ESR
Ileak
≤ 3 times initial specified limit
≤ initial specified limit
Voltage endurance test
Post test requirements:
≤ ±10% of initial value
≤ 1.3 times initial specified limit
≤ initial specified limit
85 °C; VR
2000 h
∆C/C
ESR
Ileak
Vibration resistance
test
To IEC 60068-2-6, test Fc:
Displacement amplitude 0.35 mm, frequency range 10 ... 55 Hz,
acceleration max. 5 g, duration 3 × 2 h.
Capacitor mounted by its body which is rigidly clamped to the work
surface.
Characteristics at low
temperature
Max. impedance
ratio
VR
≤ 400 V 420 ... 450 V 500 V
at 100 Hz
Z -25
Z -40
°
°
C / Z 20
C / Z 20
°
°
4
7
7
7
C
C
14
20
IEC climatic category
To IEC 60068-1:
V
R ≤ 400 V DC: 40/085/56 (ꢁ40 °C/+85 °C/56 days damp heat test)
VR > 400 V DC: 25/085/56 (ꢁ25 °C/+85 °C/56 days damp heat test)
The capacitors can be operated in the temperature range of
ꢁ40 °C to +85 °C but the impedance at ꢁ40 °C should be taken into
consideration.
Detail specification
Similar to CECC 30301-805
Sectional specification IEC 60384-4
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 19
B43510, B43520
Compact ꢁ 85 °C
Dimensional drawings
B43510, 4-pin snap-in terminals, PVC insulation
Dimensions
(mm)
Approx.
weight (g)
Packing
units (pcs.)
d +1 l ±2
35
50
60
63
76
60
36
36
36
36
33
33
33
33
33
28
28
28
28
28
35
35
35
35
40
40
40
40
40
45
45
45
45
45
70
88
80
101
126
89
100
50
60
107
125
143
178
113
136
158
181
226
70
80
100
50
60
70
80
100
Standard snap-in terminals:
length (6.3 ±1) mm.
Also available with length of (4.5 ꢁ1) mm.
All pin holes must be drilled into the
PC-board, since the unconnected pins serve
as mountings. These pins must be soldered
to isolated pads or pads with the same
potential as the negative pole.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 19
B43510, B43520
Compact ꢁ 85 °C
B43510, 4-pin snap-in terminals, PVC insulation and PET insulation cap on terminal side
Dimensions
(mm)
Approx.
weight (g) units (pcs.)
Packing
d +1.4 l +2.2/ꢁ2
35
35
35
35
35
40
40
40
40
40
45
45
45
45
45
50
60
63
76
60
36
36
36
36
33
33
33
33
33
28
28
28
28
28
70
88
80
101
126
89
100
50
60
107
125
143
178
113
136
158
181
226
70
80
100
50
60
70
80
100
Standard snap-in terminals:
length 6.3 +1/ꢁ1.4 mm. Also available with length
of 4.5 ꢁ1.4 mm. PET insulation cap is positioned
under the insulation sleeve.
All pin holes must be drilled into the PC-board,
since the unconnected pins serve as mountings.
These pins must be soldered to isolated pads or
pads with the same potential as the negative
pole.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 19
B43510, B43520
Compact ꢁ 85 °C
B43520, solder pins
Pole markings: Plus: +; Minus: ꢁ
All pin holes must be drilled into the PC-board, since the unconnected pins serve as mountings.
These pins must be soldered to isolated pads or pads with the same potential as the negative
pole.
Dimensions
(mm)
Approx.
weight (g)
Packing
units (pcs.)
d +1 Imax
35
35
35
35
35
40
40
40
40
40
54
64
63
76
60
36
36
36
36
33
33
33
33
33
74
88
84
101
126
89
104
54
64
107
125
143
178
74
84
104
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 19
B43510, B43520
Compact ꢁ 85 °C
Packing of 4-pin snap-in terminal and solder pin capacitors
For ecological reasons the packing is pure cardboard.
Ordering codes for terminal styles and insulation features
Identification in 3rd block of ordering code
4-pin snap-in terminal capacitors
Terminal version
Insulation version
PVC
PVC plus PET cap
Standard terminals 6.3 mm
Short terminals 4.5 mm
M000
M080
M087
M007
Ordering examples:
B43510A9188M007
}
}
4-pin snap-in capacitor with short terminals and standard PVC
insulation
B43510A9188M080
4-pin snap-in capacitor with standard terminals and PVC insulation
with additional PET insulation cap on terminal side
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 19
B43510, B43520
Compact ꢁ 85 °C
Overview of available types
VR (V DC)
385
400
420
450
500
Case dimensions d × l (mm)
CR (µF)
390
35 × 60
35 × 70
470
560
35 × 60
35 × 70
40 × 60
680
820
35 × 50
40 × 50
35 × 60
40 × 50
35 × 60
40 × 50
35 × 70
40 × 50
35 × 100
40 × 70
35 × 60
40 × 50
35 × 60
40 × 50
35 × 70
40 × 60
35 × 80
40 × 60
35 × 100
40 × 80
1000
35 × 70
40 × 60
35 × 70
40 × 60
45 × 50
35 × 80
40 × 60
35 × 100
40 × 70
45 × 60
40 × 100
45 × 70
1200
1500
35 × 80
40 × 70
35 × 100
40 × 70
40 × 70
40 × 80
45 × 70
45 × 100
45 × 100
40 × 80
45 × 60
35 × 100
40 × 80
45 × 70
40 × 100
45 × 70
40 × 100
45 × 80
1800
40 × 100
45 × 70
40 × 100
45 × 80
40 × 100
45 × 80
45 × 100
45 × 100
2200
2700
40 × 100
45 × 100
45 × 100
45 × 100
The capacitance and voltage ratings listed above are available in different cases upon request.
Other voltage and capacitance ratings are also available upon request.
Capacitors with solder pins are only available in 35 and 40 mm case diameters.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 19
B43510, B43520
Compact ꢁ 85 °C
Technical data and ordering codes
CR
Case
ESRtyp ESRmax Zmax
IAC,max
IAC,R
Ordering code
100 Hz dimensions
100 Hz 100 Hz 10 kHz 100 Hz 100 Hz (composition see
20 °C
µF
d × l
mm
20 °C
mΩ
20 °C
mΩ
20 °C
mΩ
60 °C
A
85 °C
A
below)
VR = 385 V DC
680
680
820
35 × 50
140
140
110
110
90
90
80
80
60
60
50
50
50
190
190
160
160
130
130
110
110
90
90
80
80
60
150
150
130
130
110
110
90
90
70
70
60
6.8
7.2
8.0
7.9
9.4
3.5
3.7
4.1
4.0
4.8
4.8
5.6
5.5
6.5
5.9
7.8
6.8
8.7
9.6
B435*0A3687M0##
B435*0B3687M0##
B435*0A3827M0##
B435*0B3827M0##
B435*0A3108M0##
B435*0B3108M0##
B435*0A3128M0##
B435*0B3128M0##
B435*0A3158M0##
B43510B3158M0##
B435*0A3188M0##
B43510B3188M0##
B435*0A3228M0##
B43510A3278M0##
40 × 50
35 × 60
40 × 50
35 × 70
40 × 60
35 × 80
40 × 70
40 × 80
45 × 60
40 × 100
45 × 70
40 × 100
45 × 100
820
1000
1000
1200
1200
1500
1500
1800
1800
2200
2700
9.3
10.9
10.8
12.7
11.4
15.3
13.3
16.9
18.7
60
50
40
40
50
VR = 400 V DC
680
680
820
35 × 60
140
140
110
110
90
90
90
80
80
190
190
160
160
130
130
130
110
110
90
150
150
130
130
110
110
110
90
7.3
7.2
8.0
7.9
9.4
9.3
8.7
11.9
10.8
13.4
3.7
3.7
4.1
4.0
4.8
4.8
4.5
6.1
5.5
6.8
B435*0A9687M0##
B435*0B9687M0##
B435*0A9827M0##
B435*0B9827M0##
B435*0A9108M0##
B435*0B9108M0##
B43510C9108M0##
B435*0A9128M0##
B435*0B9128M0##
B435*0A9158M0##
40 × 50
35 × 60
40 × 50
35 × 70
40 × 60
45 × 50
35 × 100
40 × 70
35 × 100
820
1000
1000
1000
1200
1200
1500
90
70
60
Capacitors with solder pins are only available in 35 and 40 mm case diameters.
Composition of ordering code
* = Terminal type
1 = 4-pin snap-in terminals
## = Terminal style and insulation feature
00 = solder pin or 4-pin snap-in standard
terminals and PVC insulation
2 = solder pin
07 = 4-pin snap-in short terminals and PVC
insulation
80 = 4-pin snap-in standard terminals and PVC
insulation with additional PET insulation cap
on terminal side
87 = 4-pin snap-in short terminals and PVC
insulation with additional PET insulation cap
on terminal side
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 19
B43510, B43520
Compact ꢁ 85 °C
Technical data and ordering codes
CR
Case
ESRtyp ESRmax Zmax
IAC,max
IAC,R
Ordering code
100 Hz dimensions
100 Hz 100 Hz 10 kHz 100 Hz 100 Hz (composition see
20 °C
µF
d × l
mm
20 °C
mΩ
20 °C
mΩ
20 °C
mΩ
60 °C
A
85 °C
A
below)
VR = 400 V DC
1500
1500
1800
1800
2200
2700
40 × 80
60
60
50
50
50
40
90
90
80
80
60
50
70
70
60
60
50
40
12.7
12.1
15.3
14.0
16.9
18.7
6.5
6.2
7.8
7.2
8.6
9.6
B435*0B9158M0##
B43510C9158M0##
B435*0A9188M0##
B43510B9188M0##
B43510A9228M0##
B43510A9278M0##
45 × 70
40 × 100
45 × 80
45 × 100
45 × 100
VR = 420 V DC
680
680
820
35 × 60
230
230
190
190
160
160
130
110
110
90
300
300
250
250
200
200
170
140
140
120
120
240
240
200
200
160
160
140
110
110
90
7.3
7.2
8.5
8.4
9.9
3.7
3.7
4.4
4.3
5.1
4.8
5.5
7.2
6.2
7.8
7.2
B435*0A0687M0##
B435*0B0687M0##
B435*0A0827M0##
B435*0B0827M0##
B435*0A0108M0##
B435*0B0108M0##
B435*0A0128M0##
B435*0A0158M0##
B43510B0158M0##
B435*0A0188M0##
B43510B0188M0##
40 × 50
35 × 70
40 × 60
35 × 80
40 × 60
40 × 70
40 × 100
45 × 70
40 × 100
45 × 80
820
1000
1000
1200
1500
1500
1800
1800
9.3
10.8
14.0
12.1
15.3
14.0
90
90
VR = 450 V DC
560
680
680
820
820
35 × 60
270
230
230
190
190
160
360
300
300
250
250
200
290
240
240
200
200
160
6.6
7.7
7.2
9.0
8.4
3.4
4.0
3.7
4.6
4.3
5.6
B435*0A5567M0##
B435*0A5687M0##
B435*0B5687M0##
B435*0A5827M0##
B435*0B5827M0##
B435*0A5108M0##
35 × 70
40 × 50
35 × 80
40 × 60
35 × 100
1000
10.9
Capacitors with solder pins are only available in 35 and 40 mm case diameters.
Composition of ordering code
* = Terminal type
1 = 4-pin snap-in terminals
## = Terminal style and insulation feature
00 = solder pin or 4-pin snap-in standard
terminals and PVC insulation
2 = solder pin
07 = 4-pin snap-in short terminals and PVC
insulation
80 = 4-pin snap-in standard terminals and PVC
insulation with additional PET insulation cap
on terminal side
87 = 4-pin snap-in short terminals and PVC
insulation with additional PET insulation cap
on terminal side
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 19
B43510, B43520
Compact ꢁ 85 °C
Technical data and ordering codes
CR
Case
ESRtyp ESRmax Zmax
IAC,max
IAC,R
Ordering code
100 Hz dimensions
100 Hz 100 Hz 10 kHz 100 Hz 100 Hz (composition see
20 °C
µF
d × l
mm
20 °C
mΩ
20 °C
mΩ
20 °C
mΩ
60 °C
A
85 °C
A
below)
VR = 450 V DC
1000
1000
1200
1200
1500
1500
1800
2200
40 × 70
160
160
130
130
110
110
90
200
200
170
170
140
140
120
100
160
160
140
140
110
110
90
9.9
9.3
5.1
4.8
5.8
5.5
7.2
6.5
7.8
8.6
B435*0B5108M0##
B43510C5108M0##
B435*0A5128M0##
B43510B5128M0##
B435*0A5158M0##
B43510B5158M0##
B43510A5188M0##
B43510A5228M0##
45 × 60
40 × 80
45 × 70
40 × 100
45 × 80
45 × 100
45 × 100
11.4
10.8
14.0
12.7
15.3
16.9
70
80
VR = 500 V DC
390
470
560
560
680
680
820
820
1000
1000
1200
1500
35 × 60
390
320
270
270
230
230
190
190
160
160
130
110
520
430
360
360
300
300
250
250
200
200
170
140
410
340
290
290
240
240
200
200
160
160
140
110
3.6
4.2
4.6
4.5
5.9
5.3
6.4
6.1
7.4
6.4
8.1
9.1
1.9
2.2
2.4
2.3
3.0
2.7
3.3
3.2
3.8
3.3
4.2
4.7
B435*0A6397M0##
B435*0A6477M0##
B435*0A6567M0##
B435*0B6567M0##
B435*0A6687M0##
B435*0B6687M0##
B435*0A6827M0##
B435*0B6827M0##
B435*0A6108M0##
B43510B6108M0##
B43510A6128M0##
B43510A6158M0##
35 × 70
35 × 70
40 × 60
35 × 100
40 × 70
35 × 100
40 × 80
40 × 100
45 × 70
45 × 100
45 × 100
Capacitors with solder pins are only available in 35 and 40 mm case diameters.
Composition of ordering code
* = Terminal type
1 = 4-pin snap-in terminals
## = Terminal style and insulation feature
00 = solder pin or 4-pin snap-in standard
terminals and PVC insulation
2 = solder pin
07 = 4-pin snap-in short terminals and PVC
insulation
80 = 4-pin snap-in standard terminals and PVC
insulation with additional PET insulation cap
on terminal side
87 = 4-pin snap-in short terminals and PVC
insulation with additional PET insulation cap
on terminal side
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 19
B43510, B43520
Compact ꢁ 85 °C
Useful life
depending on ambient temperature TA under ripple current operating conditions1)
Voltage derating (0.88 ꢀ VR) enables 105 °C operation
Frequency factor of permissible
Frequency characteristics of ESR
ripple current IAC versus frequency f
Typical behavior
1) Refer to chapter "General technical information, 5.3 Calculation of useful life" on how to interpret the useful life graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 19
B43510, B43520
Compact ꢁ 85 °C
Impedance Z versus frequency f
Typical behavior at 20 °C
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 19
B43510, B43520
Compact ꢁ 85 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling Al electrolytic capacitors:
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 19
B43510, B43520
Compact ꢁ 85 °C
Product safety
The table below summarize the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Safety information
Reference
Chapter "General
technical information"
Polarity
Make sure that polar capacitors are connected
with the right polarity.
1
"Basic construction of
aluminum electrolytic
capacitors"
Reverse voltage
Voltages polarity classes should be prevented by 3.1.6
connecting a diode.
"Reverse voltage"
Upper category
temperature
Do not exceed the upper category temperatur.
7.2
"Maximum permissible
operating temperature"
Maintenance
Make periodic inspections of the capacitors.
10
Before the inspection, make sure that the power "Maintenance"
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Mounting
position of screw
terminal capacitors
Do not mount the capacitor with the terminals
(safety vent) upside down.
11.1.
"Mounting positions of
capacitors with screw
terminals"
Mounting of
single-ended
capacitors
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
Robustness of
terminals
The following maximum tightening torques must
not be exceeded when connecting screw
11.3
"Mounting torques"
terminals:
M5: 2 Nm
M6: 2.5 Nm
Soldering
Do not exceed the specified time or temperature 11.5
limits during soldering. "Soldering"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 19
B43510, B43520
Compact ꢁ 85 °C
Topic
Safety information
Reference
Chapter "General
technical information"
Soldering,
Do not allow halogenated hydrocarbons to come 11.6
cleaning agents
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Passive
Avoid external energy, such as fire or electricity.
8.1
flammability
"Passive flammability"
Active
Avoid overload of the capacitors.
8.2
flammability
"Active flammability"
Reference
Chapter "Capacitors
with screw terminals"
Breakdown strength Do not damage the insulating sleeve, especially
"Screw terminals -
accessories"
of insulating
sleeves
when ring clips are used for mounting.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 19
B43510, B43520
Compact ꢁ 85 °C
Symbols and terms
Symbol English
German
C
Capacitance
Kapazität
CR
Rated capacitance
Nennkapazität
CS
Series capacitance
Serienkapazität
CS,T
Cf
Series capacitance at temperature T
Capacitance at frequency f
Case diameter, nominal dimension
Maximum case diameter
Self-inductance
Serienkapazität bei Temperatur T
Kapazität bei Frequenz f
Gehäusedurchmesser, Nennmaß
Maximaler Gehäusedurchmesser
Eigeninduktivität
d
dmax
ESL
ESR
ESRf
Equivalent series resistance
Equivalent series resistance at
frequency f
Ersatzserienwiderstand
Ersatzserienwiderstand bei Frequenz f
ESRT
Equivalent series resistance at
temperature T
Ersatzserienwiderstand bei Temperatur T
f
Frequency
Frequenz
I
Current
Strom
IAC
Alternating current (ripple current)
Root-mean-square value of alternating
current
Wechselstrom
Wechselstrom, Effektivwert
IAC,rms
IAC,f
Ripple current at frequency f
Maximum permissible ripple current
Rated ripple current
Wechselstrom bei Frequenz f
Maximal zulässiger Wechselstrom
Nennwechselstrom
IAC,max
IAC,R
IAC,R (B) Rated ripple current for base cooling
Nennwechselstromstrom für Bodenkühlung
Ableitstrom
Ileak
Ileak,op
l
Leakage current
Operating leakage current
Case length, nominal dimension
Maximum case length (without
terminals and mounting stud)
Resistance
Ableitstrom bei Betrieb
Gehäuselänge, Nennmaß
Maximale Gehäuselänge (ohne Anschlüsse
und Gewindebolzen)
lmax
R
Widerstand
Rins
Rsymm
T
Insulation resistance
Balancing resistance
Temperature
Isolationswiderstand
Symmetrierwiderstand
Temperatur
∆T
TA
TC
TB
t
Temperature difference
Ambient temperature
Case temperature
Temperaturdifferenz
Umgebungstemperatur
Gehäusetemperatur
Capacitor base temperature
Time
Temperatur des Becherbodens
Zeit
∆t
Period
Zeitraum
tb
Service life (operating hours)
Brauchbarkeitsdauer (Betriebszeit)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 17 of 19
B43510, B43520
Compact ꢁ 85 °C
Symbol English
German
V
Voltage
Spannung
VF
Vop
VR
VS
XC
XL
Z
Forming voltage
Formierspannung
Operating voltage
Rated voltage, DC voltage
Surge voltage
Betriebsspannung
Nennspannung, Gleichspannung
Spitzenspannung
Capacitive reactance
Inductive reactance
Impedance
Kapazitiver Blindwiderstand
Induktiver Blindwiderstand
Scheinwiderstand
ZT
tan δ
λ
Impedance at temperature T
Dissipation factor
Scheinwiderstand bei Temperatur T
Verlustfaktor
Failure rate
Ausfallrate
ε0
Absolute permittivity
Relative permittivity
Angular velocity; 2 ꢀ π ꢀ f
Elektrische Feldkonstante
Dielektrizitätszahl
εr
ω
Kreisfrequenz; 2 ꢀ π ꢀ f
Notes
All dimensions are given in mm.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 18 of 19
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Ma-
terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-
tailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the fore-
going for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the "General Terms of Delivery for Products and Services in the Electrical In-
dustry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK,
MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap,
SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on
the Internet at www.epcos.com/trademarks.
Page 19 of 19
相关型号:
©2020 ICPDF网 联系我们和版权申明