B43416C3108A000 [EPCOS]
Aluminum electrolytic capacitors; 铝电解电容器型号: | B43416C3108A000 |
厂家: | EPCOS |
描述: | Aluminum electrolytic capacitors |
文件: | 总16页 (文件大小:1963K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Aluminum electrolytic capacitors
Capacitors for pulse applications
Series/Type:
B43415, B43416
Date:
November 2008
© EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Capacitors for pulse applications
B43415, B43416
Compact ꢀ up to 60 °C
Application
Professional flash light generators
Features
Compact design
Outstanding reliability
High charge/discharge proof, polar
Low leakage current
Low dissipation factor
RoHS-compatible
B43415
B43416
Construction
Aluminum case, fully insulated
Safety vent
Terminals
Snap-in
Solder lug
Overview
Temperature
Series
Useful life
VR
CR
µF
°C
V DC
+60
B43415
> 50000
300 ... 500
1000 ... 6600
(max. case temp.) Solder lug
discharges
B43416
Snap-in
200 ... 1500
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 16
B43415, B43416
Compact ꢀ up to 60 °C
Specifications and characteristics in brief
Rated voltage
VR
300 ... 500 V DC
200 ... 6600 µF
ꢀ10/+20%
Rated capacitance CR
Capacitance
tolerance
∆CR
Leakage current
Ileak
(5 min, 20 °C)
Dissipation factor
Useful life
15%
tan δ
> 50000 discharges at:
Case temperature
Discharge repetition
rate
Requirements:
≤ 60 °C ∆C/C ≤ ±20% of initial value
≥ 2 s
ESR ≤ 3 times initial specified
limit
Max. discharges per
week
≤ 5000
>10 Ω
Ileak
≤ initial specified limit
Charge resistance
Discharge resistance >0.5 Ω
To IEC 60068-2-6, test Fc:
Vibration resistance test
Displacement amplitude 0.35 mm, frequency range 10 Hz ... 55 Hz,
acceleration max. 5 g, duration 3 × 2 h.
Capacitor mounted by its body which is rigidly clamped to the work
surface.
If terminals are used for mechanical fixation of the capacitor, the
vibration resistance can be reduced depending on capacitor size.
IEC climatic category
VR ≤ 400 V DC: 40/060/56 (ꢀ40 °C/+60 °C/56 days damp heat test)
VR > 400 V DC: 25/060/56 (ꢀ25 °C/+60 °C/56 days damp heat test)
Please read Cautions and warnings and
Page 3 of 16
Important notes at the end of this document.
B43415
Compact ꢀ up to 60°C
Dimensional drawing
B43415, solder lug terminals
Dimensions, weights and packing units
d × l
Lead
Approx. Packing
spacing (LS) weight units
mm
mm
g
pcs.
59
59
42
42
42
42
42
42
28
28
35 × 55
35 × 65
40 × 65
40 × 70
40 × 80
40 × 90
40 × 105
40 × 110
50 × 80
50 × 100
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
20.0
20.0
75
88
115
130
150
160
180
190
230
270
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 16
B43415
Compact ꢀ up to 60°C
Technical data and ordering codes ꢀ B43415
CR
Case dimensions
d × l
Ileak,max
5 min.
20 °C
mA
Ordering code
100 Hz
20 °C
µF
mm
VR = 300 V DC
2100
3000
4700
6600
35 × 65
40 × 70
40 × 105
50 × 100
3.4
4.4
6.0
7.7
B43415C3218A000
B43415C3308A000
B43415C3478A000
B43415C3668A000
VR = 330 V DC
2100
3000
3800
5600
40 × 65
40 × 80
40 × 105
50 × 100
3.7
4.7
5.6
7.3
B43415C8218A000
B43415C8308A000
B43415C8388A000
B43415C8568A000
VR = 360 V DC
2100
3000
3800
4900
40 × 65
40 × 90
40 × 110
50 × 100
3.9
5.0
5.9
7.6
B43415C9218A000
B43415C9308A000
B43415C9388A000
B43415C9498A000
VR = 400 V DC
1000
2100
3000
3800
35 × 55
40 × 80
40 × 110
50 × 100
2.5
4.2
5.4
6.4
B43415C9108A000
B43415D9218A000
B43415D9308A000
B43415D9388A000
VR = 500 V DC
1000
2100
2500
40 × 65
50 × 80
50 × 100
2.9
4.9
5.8
B43415C6108A000
B43415C6218A000
B43415C6258A000
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 16
B43416
Compact ꢀ up to 60°C
Dimensional drawing
B43416, snap-in terminals
Dimensions, weights and packing units
d × l
Approx.
weight
g
Packing
units
pcs.
mm
25 × 45
30 × 40
30 × 50
35 × 45
35 × 50
35 x 55
25
36
46
56
70
81
130
80
80
60
60
60
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 16
B43416
Compact ꢀ up to 60°C
Technical data and ordering codes ꢀ B43416
CR
Case dimensions
d × l
Ileak,max
5 min.
20 °C
mA
Ordering code
100 Hz
20 °C
µF
mm
VR = 300 V DC
1000
1500
30 × 50
35 × 50
2.0
2.7
B43416C3108A000
B43416C3158A000
VR = 330 V DC
1000
1200
35 × 45
35 × 50
2.2
2.5
B43416C8108A000
B43416C8128A000
VR = 360 V DC
560
1100
1200
30 × 40
35 × 50
35 × 55
1.5
2.6
2.8
B43416C9567A000
B43416C9118A000
B43416C9128A000
VR = 400 V DC
330
700
900
25 × 45
35 × 45
35 × 55
1.2
2.0
2.6
B43416C9337A000
B43416C9707A000
B43416C9907A000
VR = 500 V DC
200
560
600
25 × 45
35 × 50
35 × 55
0.9
2.0
2.1
B43416C6207A000
B43416C6567A000
B43416C6607A000
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 16
B43415, B43416
Compact ꢀ up to 60 °C
Packing of snap-in capacitors
Packing of solder lug capacitors
For ecological reasons the packing is pure cardboard.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 16
B43415, B43416
Compact ꢀ up to 60 °C
AC capacitance versus temperature
VR = 350 V DC
Typical behaviour
Dissipation factor tan δ versus temperature
VR = 350 V DC, measuring frequency = 120 Hz
Typical behaviour
Leakage current Ileak versus temperature
Measurement duration = 5 minutes
Typical behaviour
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 16
B43415, B43416
Compact ꢀ up to 60 °C
Questionnaire
Please use the questionnaire when having other, improved or additional technical requirements
which cannot be covered by our standard series.
The characteristic data listed in the questionnaire below are essentially the most important
information for determining design dimensions of electrolytic capacitors for professional
photo flash applications.
Rated capacitance per capacitor
µF
Rated voltage per capacitor
Charge/discharge voltage
Required dimensions: Diameter (max.)
Length (max.)
V DC
V
/
mm
mm
Style of terminals
Ambient temperature
° C
Method of cooling
Discharge conditions
Internal resistance of the discharge tube (if applicable)
Charging resistance (series resistance)
No. of capacitors in series
No. of capacitors in parallel
Flash sequence
Ω
Ω
Pause periods
Other special operating conditions
Expected useful life
flashes
Annual demand of capacitors
For any further support, please contact your nearest EPCOS representative.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 16
B43415, B43416
Compact ꢀ up to 60 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling Al electrolytic capacitors:
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 16
B43415, B43416
Compact ꢀ up to 60 °C
Product safety
The table below summarize the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Safety information
Reference
Chapter "General
technical information"
Polarity
Make sure that polar capacitors are connected
with the right polarity.
1
"Basic construction of
aluminum electrolytic
capacitors"
Reverse voltage
Voltages polarity classes should be prevented by 3.1.6
connecting a diode.
"Reverse voltage"
Upper category
temperature
Do not exceed the upper category temperatur.
7.2
"Maximum permissible
operating temperature"
Maintenance
Make periodic inspections of the capacitors.
10
Before the inspection, make sure that the power "Maintenance"
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Mounting
position of screw
terminal capacitors
Do not mount the capacitor with the terminals
(safety vent) upside down.
11.1
"Mounting positions of
capacitors with screw
terminals"
Mounting of
single-ended
capacitors
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
Robustness of
terminals
The following maximum tightening torques must
not be exceeded when connecting screw
11.3
"Mounting torques"
terminals:
M5: 2 Nm
M6: 2.5 Nm
Soldering
Do not exceed the specified time or temperature 11.5
limits during soldering. "Soldering"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 16
B43415, B43416
Compact ꢀ up to 60 °C
Topic
Safety information
Reference
Chapter "General
technical information"
Soldering,
Do not allow halogenated hydrocarbons to come 11.6
cleaning agents
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Passive
Avoid external energy, such as fire or electricity.
8.1
flammability
"Passive flammability"
Active
Avoid overload of the capacitors.
8.2
flammability
"Active flammability"
Reference
Chapter "Capacitors
with screw terminals"
Breakdown strength Do not damage the insulating sleeve, especially
"Screw terminals -
accessories"
of insulating
sleeves
when ring clips are used for mounting.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 16
B43415, B43416
Compact ꢀ up to 60 °C
Symbols and terms
Symbol English
German
C
Capacitance
Kapazität
CR
Rated capacitance
Nennkapazität
CS
Series capacitance
Serienkapazität
CS,T
Cf
Series capacitance at temperature T
Capacitance at frequency f
Case diameter, nominal dimension
Maximum case diameter
Self-inductance
Serienkapazität bei Temperatur T
Kapazität bei Frequenz f
Gehäusedurchmesser, Nennmaß
Maximaler Gehäusedurchmesser
Eigeninduktivität
d
dmax
ESL
ESR
ESRf
Equivalent series resistance
Equivalent series resistance at
frequency f
Ersatzserienwiderstand
Ersatzserienwiderstand bei Frequenz f
ESRT
Equivalent series resistance at
temperature T
Ersatzserienwiderstand bei Temperatur T
f
Frequency
Frequenz
I
Current
Strom
IAC
Alternating current (ripple current)
Root-mean-square value of alternating
current
Wechselstrom
Wechselstrom, Effektivwert
IAC,rms
IAC,f
Ripple current at frequency f
Maximum permissible ripple current
Rated ripple current
Wechselstrom bei Frequenz f
Maximal zulässiger Wechselstrom
Nennwechselstrom
IAC,max
IAC,R
IAC,R (B) Rated ripple current for base cooling
Nennwechselstromstrom für Bodenkühlung
Ableitstrom
Ileak
Ileak,op
l
Leakage current
Operating leakage current
Case length, nominal dimension
Maximum case length (without
terminals and mounting stud)
Resistance
Ableitstrom bei Betrieb
Gehäuselänge, Nennmaß
Maximale Gehäuselänge (ohne Anschlüsse
und Gewindebolzen)
lmax
R
Widerstand
Rins
Rsymm
T
Insulation resistance
Balancing resistance
Temperature
Isolationswiderstand
Symmetrierwiderstand
Temperatur
∆T
TA
TC
TB
t
Temperature difference
Ambient temperature
Case temperature
Temperaturdifferenz
Umgebungstemperatur
Gehäusetemperatur
Capacitor base temperature
Time
Temperatur des Becherbodens
Zeit
∆t
Period
Zeitraum
tb
Service life (operating hours)
Brauchbarkeitsdauer (Betriebszeit)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 16
B43415, B43416
Compact ꢀ up to 60 °C
Symbol English
German
V
Voltage
Spannung
VF
Vop
VR
VS
XC
XL
Z
Forming voltage
Formierspannung
Operating voltage
Rated voltage, DC voltage
Surge voltage
Betriebsspannung
Nennspannung, Gleichspannung
Spitzenspannung
Capacitive reactance
Inductive reactance
Impedance
Kapazitiver Blindwiderstand
Induktiver Blindwiderstand
Scheinwiderstand
ZT
tan δ
λ
Impedance at temperature T
Dissipation factor
Failure rate
Scheinwiderstand bei Temperatur T
Verlustfaktor
Ausfallrate
ε0
Absolute permittivity
Relative permittivity
Angular velocity; 2 ꢁ π ꢁ f
Elektrische Feldkonstante
Dielektrizitätszahl
εr
ω
Kreisfrequenz; 2 ꢁ π ꢁ f
Notes
All dimensions are given in mm.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 16
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Ma-
terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-
tailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the fore-
going for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the "General Terms of Delivery for Products and Services in the Electrical In-
dustry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK,
MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap,
SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on
the Internet at www.epcos.com/trademarks.
Page 16 of 16
相关型号:
©2020 ICPDF网 联系我们和版权申明