B41858C3338M000 [EPCOS]
Aluminum electrolytic capacitors; 铝电解电容器
| 型号： | B41858C3338M000 |
| 厂家： | 
EPCOS |
| 描述： | Aluminum electrolytic capacitors |
| 文件： | 总33页 (文件大小：598K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Aluminum electrolytic capacitors
Single-ended capacitors
Series/Type:
B41858
Date:
November 2008
© EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Single-ended capacitors
B41858
Low impedance ꢀ 105 °C
Long-life grade capacitors
for professional applications
Applications
For use in output circuits of switch-mode power supplies of
compact design
For professional industrial electronics, telecommunications
and data processing equipment
Automotive electronics
Features
Low impedance at high frequency
Low ESR
High ripple current capability
High reliability and long useful life
RoHS-compatible
Construction
Radial leads
Charge-discharge proof, polar
Aluminum case with insulating sleeve
Minus pole marking on the insulating sleeve
Case with safety vent
Delivery mode
Terminal configurations and packing:
Bulk
Taped, Ammo pack
Cut
Kinked
PAPR (protection against polarity reversal):
crimped leads, J leads, bent leads
Refer to chapter "Single-ended capacitors ꢀ Taping, packing
and lead configurations" for further details and ordering
example.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 33
B41858
Low impedance ꢀ 105 °C
Specifications and characteristics in brief
Rated voltage VR
Surge voltage VS
10 ... 100 V DC
1.15 ꢁ VR
Rated capacitance CR
Capacitance tolerance
22 ... 10000 µF
±20% ꢂ M
Dissipation factor tan δ
(20 °C, 120 Hz)
For capacitance higher than 1000 µF add 0.02 for every increase of
1000 µF.
VR (V DC)
10
16
25
35
50
63
100
tan δ (max.)
0.19 0.16 0.14 0.12 0.10 0.10 0.08
Leakage current Ileak
(20 °C, 5 min)
Self-inductance ESL
Diameter (mm)
ESL (nH)
8 ... 12.5
20
16
26
18
34
Useful life
105 °C; VR; IAC,R
105 °C; VR; IAC,R
> 3000 h for d = 8 mm
> 5000 h for d ≥ 10 mm
Requirements
∆C/C ≤ ±40% of initial value
tan δ ≤ 3 times initial specified limit
Ileak ≤ initial specified limit
Voltage endurance test
105 °C; VR
3000 h for d = 8 mm
5000 h for d ≥ 10 mm
Post test requirements
Vibration resistance test
∆C/C ≤ ±30% of initial value
tan δ ≤ 2 times initial specified limit
Ileak
≤ initial specified limit
To IEC 60068-2-6, test Fc:
Displacement amplitude 1.5 mm, frequency range 10 ... 2000 Hz,
acceleration max. 20 g, duration 3 × 2 h.
Capacitor rigidly clamped by the aluminum case.
IEC climatic category
Sectional specification
To IEC 60068-1:
55/105/56 (ꢀ55 °C/+105 °C/56 days damp heat test)
IEC 60384-4, AEC Q200
Please read Cautions and warnings and
Page 3 of 33
Important notes at the end of this document.
B41858
Low impedance ꢀ 105 °C
Dimensional drawings
With stand-off rubber seal
With flat rubber seal
Diameters (mm): 10, 12.5, 16, 18
Diameter (mm): 8
Dimensions and weights
Dimensions (mm)
Approx. weight
d +0.5
8
l
a ±0.5
3.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
b
g
11.5 +1.5
12.5 +1.0
16 +1.0
20 +2.0
20 +2.0
25 +2.0
30 +2.0
40 +2.0
20 +2.0
25 +2.0
31.5 +2.0
20 +2.0
25 +2.0
31.5 +2.0
35 +2.0
40 +2.0
0.60 ±0.05
0.60 ±0.05
0.60 ±0.05
0.60 ±0.05
0.60 ±0.05
0.60 ±0.05
0.80 ±0.05
0.80 ±0.05
0.80 ±0.05
0.80 ±0.05
0.80 ±0.05
0.80 ±0.1
0.80 ±0.1
0.80 ±0.1
0.80 ±0.1
0.80 ±0.1
1.0
1.6
1.9
2.6
3.6
4.5
5.3
7.4
5.5
7.5
7.8
8.0
9.0
11.0
13.0
16.0
10
10
10
12.5
12.5
12.5
12.5
16
16
16
18
18
18
18
18
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 33
B41858
Low impedance ꢀ 105 °C
Overview of available types
VR (V DC)
10
16
25
35
Case dimensions d × l (mm)
CR (µF)
120
8
8
× 11.5
× 11.5
150
180
8
8
× 11.5
× 11.5
10 × 12.5
10 × 12.5
220
270
8
8
× 11.5
× 11.5
10 × 12.5
10 × 12.5
330
8
8
8
× 11.5
× 11.5
× 11.5
10 × 16
390
470
10 × 12.5
10 × 16
10 × 16
10 × 20
10 × 20
10 × 16
10 × 16
10 × 20
10 × 20
12.5 × 20
560
10 × 12.5
10 × 12.5
10 × 16
680
820
10 × 20
12.5 × 20
1000
10 × 16
12.5 × 25
16 × 20
1200
1500
10 × 16
10 × 20
10 × 20
12.5 × 20
16 × 20
12.5 × 25
16 × 20
12.5 × 40
16 × 25
1800
2200
10 × 20
12.5 × 20
12.5 × 25
12.5 × 25
16 × 25
18 × 20
12.5 × 40
16 × 25
18 × 20
18 × 25
2700
3300
3900
12.5 × 25
16 × 20
16 × 31.5
18 × 20
18 × 31.5
18 × 31.5
18 × 35
12.5 × 25
16 × 20
12.5 × 40
16 × 25
18 × 25
12.5 × 40
16 × 20
16 × 31.5
18 × 20
18 × 31.5
4700
5600
6800
8200
10000
18 × 20
12.5 × 40
16 × 31.5
18 × 31.5
18 × 35
18 × 25
18 × 31.5
18 × 35
18 × 40
18 × 40
18 × 31.5
18 × 35
18 × 40
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 33
B41858
Low impedance ꢀ 105 °C
VR (V DC)
50
63
100
8
Case dimensions d × l (mm)
CR (µF)
22
× 11.5
27
10 × 12.5
10 × 16
10 × 20
33
56
68
82
8
8
× 11.5
× 11.5
10 × 12.5
10 × 12.5
10 × 16
10 × 16
10 × 20
100
120
150
180
12.5 × 20
12.5 × 25
10 × 12.5
10 × 12.5
10 × 16
12.5 × 30
16 × 20
220
270
10 × 16
10 × 20
12.5 × 20
16 × 25
12.5 × 40
18 × 20
330
390
470
10 × 20
12.5 × 20
12.5 × 20
12.5 × 25
18 × 25
18 × 31.5
18 × 35
12.5 × 25
16 × 20
560
680
12.5 × 25
12.5 × 30
18 × 35
18 × 40
12.5 × 40
16 × 25
18 × 20
820
12.5 × 40
16 × 20
16 × 31.5
18 × 25
1000
16 × 31.5
18 × 20
16 × 31.5
1200
1500
1800
2200
2700
18 × 20
18 × 25
18 × 31.5
18 × 35
18 × 40
18 × 31.5
18 × 35
18 × 40
Other voltage and capacitance ratings are available upon request.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 33
B41858
Low impedance ꢀ 105 °C
Technical data and ordering codes
CR Case ESRmax ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz dimensions 10 kHz 120 Hz 10 kHz 100 kHz 100 kHz 100 kHz (composition see
20 °C d × l
µF mm
VR = 10 V DC
ꢀ40 °C 20 °C 20 °C 20 °C
105 °C 85 °C
mA mA
below)
Ω
Ω
Ω
Ω
330
390
470
8
8
8
× 11.5 2.195 0.727 0.274 0.246
× 11.5 2.195 0.615 0.274 0.246
× 11.5 2.195 0.511 0.274 0.246
436
436
436
746
746
846
846
846
1202
1202
1396
2028
2028
2146
2858
2146
2381
2858
3122
3539
3864
654
654
654
B41858C3337M***
B41858C3397M***
B41858C3477M***
B41858C3567M***
B41858C3687M***
B41858C3827M***
B41858C3108M***
B41858C3128M***
B41858C3158M***
B41858C3188M***
B41858C3228M***
B41858C3278M***
B41858C3338M***
B41858D3338M***
B41858C3398M***
B41858D3398M***
B41858C3478M***
B41858C3568M***
B41858C3688M***
B41858C3828M***
B41858C3109M***
560 10 × 12.5 1.035 0.429 0.129 0.113
680 10 × 12.5 1.035 0.353 0.129 0.113
1118
1118
1269
1269
1269
1803
1803
2094
3043
3043
3219
4287
3219
3571
4286
4683
5308
5796
820 10 × 16
1000 10 × 16
1200 10 × 16
1500 10 × 20
1800 10 × 20
2200 12.5 × 20
2700 12.5 × 25
3300 12.5 × 25
3300 16 × 20
3900 12.5 × 40
3900 16 × 20
4700 18 × 20
5600 12.5 × 40
0.946 0.293 0.118 0.105
0.946 0.240 0.118 0.105
0.944 0.199 0.118 0.105
0.584 0.159 0.073 0.062
0.584 0.133 0.073 0.062
0.496 0.121 0.062 0.060
0.327 0.098 0.041 0.034
0.327 0.088 0.041 0.034
0.307 0.088 0.038 0.033
0.240 0.074 0.030 0.025
0.307 0.074 0.038 0.033
0.271 0.067 0.034 0.031
0.243 0.061 0.030 0.025
6800 16 × 31.5 0.192 0.054 0.024 0.022
8200 18 × 31.5 0.165 0.051 0.021 0.020
10000 18 × 35
0.160 0.047 0.020 0.018
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (from d × l = 10 × 20 mm to 18 × 40 mm, excluding 12.5 × 30/40 mm)
002 = for cut leads, bulk (for ≥ 10 mm, excluding d × l = 12.5 × 30/40 mm)
003 = for crimped leads, blister (from d × l = 16 × 20 mm to 18 × 40 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm, excluding 12.5 × 30/40 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 8 × 11.5 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 33
B41858
Low impedance ꢀ 105 °C
Technical data and ordering codes
CR
Case
ESRmax ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz dimensions 10 kHz 120 Hz 10 kHz 100 kHz 100 kHz 100 kHz (composition see
20 °C d × l
µF mm
VR = 16 V DC
ꢀ40 °C 20 °C 20 °C 20 °C
105 °C 85 °C
mA mA
below)
Ω
Ω
Ω
Ω
270
330
8
8
× 11.5 2.192 0.748 0.274 0.246
× 11.5 2.192 0.612 0.274 0.246
436
436
746
846
846
654
B41858D4277M***
B41858D4337M***
B41858C4477M***
B41858C4567M***
B41858C4687M***
B41858C4827M***
B41858C4108M***
B41858C4128M***
B41858C4158M***
B41858C4188M***
B41858C4228M***
B41858C4278M***
B41858D4338M***
B41858C4338M***
B41858D4398M***
B41858C4398M***
B41858C4478M***
B41858C4688M***
B41858C4828M***
B41858C4109M***
654
1118
1269
1269
1803
1803
1803
2094
3043
3043
3219
4286
3724
4683
3571
4412
5308
5796
6700
470 10 × 12.5 1.035 0.430 0.129 0.113
560 10 × 16
680 10 × 16
820 10 × 20
1000 10 × 20
1200 10 × 20
1500 12.5 × 20
1800 12.5 × 25
2200 12.5 × 25
2700 16 × 20
3300 12.5 × 40
3300 16 × 25
3900 16 × 31.5 0.192 0.065 0.024 0.022
3900 18 × 20
4700 18 × 25
6800 18 × 31.5 0.165 0.048 0.021 0.020
8200 18 × 35
10000 18 × 40
0.944 0.360 0.118 0.105
0.946 0.297 0.118 0.105
0.584 0.243 0.073 0.062
0.584 0.202 0.073 0.062
0.584 0.168 0.073 0.062
0.496 0.135 0.062 0.060
0.327 0.112 0.041 0.034
0.327 0.103 0.041 0.034
0.307 0.084 0.038 0.033
0.243 0.077 0.030 0.025
0.251 0.077 0.031 0.029
1202
1202
1202
1396
2028
2028
2146
2858
2483
3122
2381
2941
3539
3864
4467
0.271 0.065 0.034 0.031
0.217 0.059 0.027 0.024
0.160 0.046 0.020 0.018
0.125 0.043 0.016 0.015
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (from d × l = 10 × 20 mm to 18 × 40 mm, excluding 12.5 × 30/40 mm)
002 = for cut leads, bulk (for ≥ 10 mm, excluding d × l = 12.5 × 30/40 mm)
003 = for crimped leads, blister (from d × l = 16 × 20 mm to 18 × 40 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm, excluding 12.5 × 30/40 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 8 × 11.5 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 33
B41858
Low impedance ꢀ 105 °C
Technical data and ordering codes
CR Case ESRmax ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz dimensions 10 kHz 120 Hz 10 kHz 100 kHz 100 kHz 100 kHz (composition see
20 °C d × l
µF mm
VR = 25 V DC
ꢀ40 °C 20 °C 20 °C 20 °C
105 °C 85 °C
mA mA
below)
Ω
Ω
Ω
Ω
180
220
8
8
× 11.5 2.192 0.982 0.274 0.246
× 11.5 2.192 0.803 0.274 0.246
436
436
746
746
846
654
B41858D5187M***
B41858D5227M***
B41858C5277M***
B41858C5337M***
B41858C5477M***
B41858C5567M***
B41858C5687M***
B41858C5827M***
B41858C5108M***
B41858C5158M***
B41858C5188M***
B41858D5228M***
B41858C5228M***
B41858E5228M***
B41858D5278M***
B41858C5278M***
B41858C5338M***
B41858C5398M***
B41858D5478M***
B41858D5568M***
B41858C5688M***
654
1119
1118
1269
1269
1803
1803
2094
3043
3219
4286
3724
3572
4683
3571
4412
5308
5309
5796
6701
270 10 × 12.5 1.032 0.654 0.129 0.113
330 10 × 12.5 1.035 0.536 0.129 0.113
470 10 × 16
560 10 × 16
680 10 × 20
820 10 × 20
1000 12.5 × 20
1500 12.5 × 25
1800 16 × 20
2200 12.5 × 40
2200 16 × 25
2200 18 × 20
2700 16 × 31.5 0.192 0.075 0.024 0.022
2700 18 × 20
3300 18 × 25
3900 18 × 31.5 0.165 0.058 0.021 0.020
4700 18 × 31.5 0.168 0.053 0.021 0.020
5600 18 × 35
6800 18 × 40
0.946 0.376 0.118 0.105
0.944 0.315 0.118 0.105
0.584 0.260 0.073 0.062
0.584 0.216 0.073 0.062
0.496 0.177 0.062 0.060
0.327 0.118 0.041 0.034
0.307 0.098 0.038 0.033
0.243 0.092 0.030 0.025
0.251 0.092 0.031 0.029
0.248 0.091 0.031 0.031
846
1202
1202
1396
2028
2146
2858
2483
2381
3122
2381
2941
3539
3539
3864
4467
0.271 0.075 0.034 0.031
0.217 0.069 0.027 0.024
0.160 0.049 0.020 0.018
0.128 0.044 0.016 0.015
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (from d × l = 10 × 20 mm to 18 × 40 mm, excluding 12.5 × 30/40 mm)
002 = for cut leads, bulk (for ≥ 10 mm, excluding d × l = 12.5 × 30/40 mm)
003 = for crimped leads, blister (from d × l = 16 × 20 mm to 18 × 40 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm, excluding 12.5 × 30/40 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 8 × 11.5 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 33
B41858
Low impedance ꢀ 105 °C
Technical data and ordering codes
CR
Case
ESRmax ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz dimensions 10 kHz 120 Hz 10 kHz 100 kHz 100 kHz 100 kHz (composition see
20 °C d × l
µF mm
VR = 35 V DC
ꢀ40 °C 20 °C 20 °C 20 °C
105 °C 85 °C
mA mA
below)
Ω
Ω
Ω
Ω
120
150
8
8
× 11.5 2.192 1.263 0.274 0.246
× 11.5 2.192 1.010 0.274 0.246
436
436
746
746
846
654
B41858D7127M***
B41858C7157M***
B41858C7187M***
B41858C7227M***
B41858C7337M***
B41858C7477M***
B41858C7567M***
B41858C7687M***
B41858C7108M***
B41858D7108M***
B41858C7128M***
B41858D7158M***
B41858C7158M***
B41858E7188M***
B41858C7188M***
B41858C7228M***
B41858C7278M***
B41858D7338M***
B41858C7398M***
B41858C7478M***
654
1118
1118
1269
1803
1803
2094
3043
3219
3219
4286
3724
3725
3571
4412
5308
5309
5796
6700
180 10 × 12.5 1.035 0.842 0.129 0.113
220 10 × 12.5 1.035 0.689 0.129 0.113
330 10 × 16
470 10 × 20
560 10 × 20
680 12.5 × 20
1000 12.5 × 25
1000 16 × 20
1200 16 × 20
1500 12.5 × 40
1500 16 × 25
1800 16 × 25
1800 18 × 20
2200 18 × 25
0.946 0.459 0.118 0.105
0.584 0.323 0.073 0.062
0.584 0.271 0.073 0.062
0.496 0.223 0.062 0.060
0.327 0.152 0.041 0.034
0.304 0.151 0.038 0.033
0.307 0.126 0.038 0.033
0.243 0.101 0.030 0.025
0.251 0.101 0.031 0.029
0.248 0.084 0.031 0.029
0.271 0.084 0.034 0.031
0.217 0.080 0.027 0.024
1202
1202
1396
2028
2146
2146
2858
2483
2483
2381
2941
3539
3539
3864
4467
2700 18 × 31.5 0.165 0.065 0.021 0.020
3300 18 × 31.5 0.168 0.061 0.021 0.020
3900 18 × 35
4700 18 × 40
0.160 0.051 0.020 0.018
0.125 0.048 0.016 0.015
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (from d × l = 10 × 20 mm to 18 × 40 mm, excluding 12.5 × 30/40 mm)
002 = for cut leads, bulk (for ≥ 10 mm, excluding d × l = 12.5 × 30/40 mm)
003 = for crimped leads, blister (from d × l = 16 × 20 mm to 18 × 40 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm, excluding 12.5 × 30/40 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 8 × 11.5 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 33
B41858
Low impedance ꢀ 105 °C
Technical data and ordering codes
CR Case ESRmax ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz dimensions 10 kHz 120 Hz 10 kHz 100 kHz 100 kHz 100 kHz (composition see
20 °C d × l
µF mm
VR = 50 V DC
ꢀ40 °C 20 °C 20 °C 20 °C
105 °C 85 °C
mA mA
below)
Ω
Ω
Ω
Ω
82
100
8
8
× 11.5 5.168 1.540 0.646 0.573
× 11.5 5.168 1.263 0.646 0.573
340
340
555
555
778
510
510
833
B41858C6826M***
B41858C6107M***
B41858C6127M***
B41858C6157M***
B41858C6187M***
B41858C6227M***
B41858C6337M***
B41858C6477M***
B41858C6567M***
B41858C6687M***
B41858C6827M***
B41858D6827M***
B41858C6108M***
B41858D6108M***
B41858C6128M***
B41858C6158M***
B41858C6188M***
B41858C6228M***
B41858C6278M***
120 10 × 12.5 2.984 1.053 0.373 0.336
150 10 × 12.5 2.984 0.842 0.373 0.336
833
180 10 × 16
220 10 × 16
330 10 × 20
470 12.5 × 20
560 12.5 × 25
680 12.5 × 30
820 12.5 × 40
820 16 × 20
1.400 0.702 0.175 0.160
1.400 0.574 0.175 0.160
1.000 0.383 0.125 0.118
0.880 0.269 0.110 0.104
0.712 0.226 0.089 0.082
0.360 0.186 0.045 0.043
0.269 0.154 0.034 0.032
0.401 0.154 0.050 0.046
1167
1167
1545
1950
2235
3210
4199
2730
3980
2995
2996
3626
4483
4980
5807
778
1030
1300
1490
2140
2799
1820
2653
1997
1997
2417
2989
3320
3871
1000 16 × 31.5 0.260 0.126 0.032 0.030
1000 18 × 20
1200 18 × 20
1500 18 × 25
1800 18 × 31.5 0.300 0.070 0.030 0.028
2200 18 × 35
2700 18 × 40
0.477 0.126 0.048 0.044
0.384 0.105 0.048 0.044
0.382 0.084 0.038 0.036
0.268 0.069 0.027 0.024
0.210 0.065 0.021 0.020
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (from d × l = 10 × 20 mm to 18 × 40 mm, excluding 12.5 × 30/40 mm)
002 = for cut leads, bulk (for ≥ 10 mm, excluding d × l = 12.5 × 30/40 mm)
003 = for crimped leads, blister (from d × l = 16 × 20 mm to 18 × 40 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm, excluding 12.5 × 30/40 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 8 × 11.5 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 33
B41858
Low impedance ꢀ 105 °C
Technical data and ordering codes
CR
Case
ESRmax ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz dimensions 10 kHz 120 Hz 10 kHz 100 kHz 100 kHz 100 kHz (composition see
20 °C d × l
µF mm
VR = 63 V DC
ꢀ40 °C 20 °C 20 °C 20 °C
105 °C 85 °C
mA mA
below)
Ω
Ω
Ω
Ω
56
68
8
8
× 11.5 5.413 2.256 0.541 0.488
× 11.5 4.328 1.857 0.541 0.488
310
310
354
354
519
519
705
705
876
464
465
531
531
779
B41858C8566M***
B41858C8686M***
B41858C8826M***
B41858C8107M***
B41858C8127M***
B41858C8157M***
B41858C8187M***
B41858C8227M***
B41858C8277M***
B41858C8337M***
B41858C8397M***
B41858E8477M***
B41858C8477M***
B41858C8687M***
B41858D8687M***
B41858E8687M***
B41858C8827M***
B41858D8827M***
B41858C8108M***
B41858C8128M***
B41858C8158M***
B41858C8188M***
82 10 × 12.5 5.766 1.540 0.577 0.500
100 10 × 12.5 4.616 1.263 0.577 0.500
120 10 × 16
150 10 × 16
180 10 × 20
220 10 × 20
270 12.5 × 20
330 12.5 × 20
390 12.5 × 25
470 12.5 × 25
470 16 × 20
680 12.5 × 40
680 16 × 25
680 18 × 20
820 16 × 31.5 0.541 0.154 0.054 0.049
820 18 × 25 0.761 0.154 0.076 0.069
1000 16 × 31.5 0.432 0.126 0.054 0.049
1200 18 × 31.5 0.518 0.105 0.052 0.047
1500 18 × 35
1800 18 × 40
3.075 1.053 0.308 0.279
2.464 0.842 0.308 0.279
1.986 0.702 0.199 0.180
1.592 0.574 0.199 0.180
1.688 0.468 0.169 0.153
1.688 0.383 0.169 0.153
1.236 0.324 0.124 0.112
0.992 0.268 0.124 0.112
1.037 0.269 0.104 0.094
0.717 0.186 0.072 0.065
0.772 0.186 0.077 0.070
0.960 0.186 0.096 0.087
779
1058
1058
1315
1315
1676
1677
1907
2677
2400
2140
3138
2602
3138
3441
3888
4450
876
1118
1118
1272
1785
1600
1427
2092
1735
2092
2294
2592
2967
0.441 0.084 0.044 0.040
0.375 0.070 0.038 0.034
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (from d × l = 10 × 20 mm to 18 × 40 mm, excluding 12.5 × 30/40 mm)
002 = for cut leads, bulk (for ≥ 10 mm, excluding d × l = 12.5 × 30/40 mm)
003 = for crimped leads, blister (from d × l = 16 × 20 mm to 18 × 40 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm, excluding 12.5 × 30/40 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 8 × 11.5 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 33
B41858
Low impedance ꢀ 105 °C
Technical data and ordering codes
CR Case ESRmax ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz dimensions 10 kHz 120 Hz 10 kHz 100 kHz 100 kHz 100 kHz (composition see
20 °C d × l
µF mm
VR = 100 V DC
22 × 11.5 12.219 4.593 1.222 1.114
27 10 × 12.5 9.813 3.743 0.981 0.883
ꢀ40 °C 20 °C 20 °C 20 °C
105 °C 85 °C
mA mA
below)
Ω
Ω
Ω
Ω
8
205
307
B41858C9226M***
B41858C9276M***
B41858C9336M***
B41858C9566M***
B41858C9107M***
B41858C9127M***
B41858C9187M***
B41858D9187M***
B41858C9227M***
B41858C9277M***
B41858D9277M***
B41858C9337M***
B41858D9337M***
B41858C9397M***
B41858C9477M***
B41858C9567M***
B41858C9687M***
266
357
400
536
33 10 × 16
56 10 × 20
100 12.5 × 20
120 12.5 × 25
180 12.5 × 30
180 16 × 20
220 16 × 25
270 12.5 × 40
270 18 × 20
6.542 3.062 0.654 0.589
4.606 1.804 0.461 0.423
3.048 1.011 0.305 0.281
2.038 0.842 0.204 0.188
1.732 0.561 0.173 0.159
1.313 0.561 0.131 0.122
0.985 0.459 0.099 0.091
1.314 0.374 0.131 0.121
1.260 0.374 0.126 0.119
460
691
647
971
864
1296
1514
1678
2103
1963
1830
2319
2215
2861
3092
3092
4025
1009
1119
1402
1309
1220
1546
1477
1907
2061
2061
2683
330 16 × 31.5 0.973 0.306 0.097 0.090
330 18 × 25 1.008 0.306 0.101 0.095
390 18 × 31.5 0.720 0.259 0.072 0.068
470 18 × 35
560 18 × 35
680 18 × 40
0.679 0.215 0.068 0.063
0.679 0.180 0.068 0.063
0.438 0.149 0.044 0.042
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (from d × l = 10 × 20 mm to 18 × 40 mm, excluding 12.5 × 30/40 mm)
002 = for cut leads, bulk (for ≥ 10 mm, excluding d × l = 12.5 × 30/40 mm)
003 = for crimped leads, blister (from d × l = 16 × 20 mm to 18 × 40 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm, excluding 12.5 × 30/40 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 8 × 11.5 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 33
B41858
Low impedance ꢀ 105 °C
Useful life
depending on ambient temperature TA under ripple current operating conditions1)
d = 8 mm
d ≥ 10 mm
1) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life
graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 33
B41858
Low impedance ꢀ 105 °C
Frequency factor of permissible ripple current IAC versus frequency f
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 33
B41858
Low impedance ꢀ 105 °C
Taping, packing and lead configurations
Taping
Single-ended capacitors are available taped in Ammo pack from diameter 5 to 18 mm as follows:
Lead spacing F = 2.5 mm ( d = 5 … 6.3 mm)
Lead spacing F = 3.5 mm ( d = 8 mm)
Lead spacing F = 5.0 mm (from d × l = 10 × 12.5 mm to 12.5 × 30 mm)
Lead spacing F = 7.5 mm ( d = 16 ... 18 mm).
Lead spacing 2.5 mm ( d = 5 ... 6.3 mm)
Last 3 digits of ordering code: 007
Dimensions in mm
d
F
H
W
W0
W1
W2
H0
P
P0
P1
I1
t
∆h
D0
5
2.5 18.5 18.0 5.5 9.0 1.5 16.0 12.7 12.7 5.1 1.0 0.7 1.0 4.0
6.3
Toler-
ance
+0.8
±0.75 ±0.5 min. ±0.5 max. ±0.5 ±1.0 ±0.2 ±0.5 max. ±0.2 max. ±0.2
ꢀ0.2
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 33
B41858
Low impedance ꢀ 105 °C
Lead spacing 3.5 mm ( d = 8 mm)
Last 3 digits of ordering code: 006
Dimensions in mm
d
F
H
W
W0
W1
W2
1.5
P
P0
P1
I1
t
∆h
D0
8
3.5
18.5 18.0 12.5 9.0
12.7 12.7 4.6
1.0
0.7
1.0
4.0
Toler-
ance
+0.8
ꢀ0.2
±1.0 ±0.5 min. ±0.5 max. ±1.0 ±0.2 ±0.5 max. ±0.2 max. ±0.2
Please read Cautions and warnings and
Important notes at the end of this document.
Page 17 of 33
B41858
Low impedance ꢀ 105 °C
Lead spacing 5.0 mm ( d = 5 ... 8 mm)
Last 3 digits of ordering code: 008
Lead spacing 5.0 mm (from d × l = 10 × 12.5 mm to 12.5 × 30 mm)
Last 3 digits of ordering code: 008
Dimensions in mm
d
F
H
W
W0 W1 W2
H0
P
P0
P1
I1
t
∆h
D0
5
5.0
18.5 18.0 5.5 9.0 1.5
16.0 12.7 12.7 3.85 1.0
0.7 1.0
4.0
6.3
8
20.0
16.0 12.7 12.7 3.85
10
5.0
19.0 18.0 12.5 9.0 1.5
19.0
ꢀ
ꢀ
12.7 12.7 3.85 1.0
15.0 15.0 5.0
0.7 1.0
4.0
12.5
Toler-
ance
+0.8
ꢀ0.2
±0.75 ±0.5 min. ±0.5 max. ±0.5 ±1.0 ±0.2 ±0.5 max. ±0.2 max. ±0.2
Please read Cautions and warnings and
Important notes at the end of this document.
Page 18 of 33
B41858
Low impedance ꢀ 105 °C
Lead spacing 7.5 mm ( d = 16 ...18 mm)
Last 3 digits of ordering code: 009
Dimensions in mm
d
F
H
W
W0
W1
W2
1.5
P
P0
P1
I1
t
∆P ∆h D0
4.0
16
18 *)
7.5 18.5 18.0 12.5 9.0
30.0 15.0 3.75 1.0
0.7
0
0
Toler-
ance
ꢀ0.5
+0.75
±0.8
±0.5 min. ±0.5 max. ±1.0 ±0.2 ±0.5 max. ±0.2 ±1.0 ±1.0 ±0.2
*) Available only for case dimensions 18 × 20, 18 × 25 and 18 × 31.5 mm
Please read Cautions and warnings and
Important notes at the end of this document.
Page 19 of 33
B41858
Low impedance ꢀ 105 °C
Packing units and box dimensions
Ammo pack
Case size
d × l
Dimensions (mm)
Packing
units
mm
Amax
345
345
345
345
345
345
345
345
315
315
315
315
315
315
Bmax
55
55
55
55
60
60
65
65
65
65
65
65
65
65
Cmax
240
290
240
280
200
200
280
280
275
275
275
275
275
275
pcs.
5 × 11
2000
2000
1000
750
500
500
500
500
300
300
300
250
250
250
6.3 × 11
8 × 11.5
10 × 12.5
10 × 16
10 × 20
12.5 × 20
12.5 × 25
16 × 20
16 × 25
16 × 31.5
18 × 20
18 × 25
18 × 31.5
Please read Cautions and warnings and
Important notes at the end of this document.
Page 20 of 33
B41858
Low impedance ꢀ 105 °C
Kinked or cut leads
Single-ended capacitors are available with kinked or cut leads. Other lead configurations also
available upon request.
Kinked leads
Last 3 digits of ordering code: 001
With stand-off rubber seal
Case size
d × l (mm)
10 × 20
Dimensions (mm)
a ±0.5
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
12.5 × 20
12.5 × 25
16 × 20
16 × 25
16 × 31.5
18 × 20
18 × 25
18 × 31.5
18 × 35
18 × 40
With flat rubber seal
Please read Cautions and warnings and
Important notes at the end of this document.
Page 21 of 33
B41858
Low impedance ꢀ 105 °C
Cut leads
Last 3 digits of ordering code: 002
With stand-off rubber seal
Case size
d × l (mm)
10 × 12.5
10 × 16
10 × 20
12.5 × 20
12.5 × 25
16 × 20
16 × 25
16 × 31.5
18 × 20
18 × 25
18 × 31.5
18 × 35
18 × 40
20 × 20
20 × 25
20 × 30
20 × 35
20 × 40
22 × 30
22 × 35
22 × 40
Dimensions (mm)
a ±0.5
5.0
5.0
5.0
5.0
5.0
7.5
With flat rubber seal
7.5
7.5
7.5
7.5
7.5
7.5
7.5
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
Please read Cautions and warnings and
Important notes at the end of this document.
Page 22 of 33
B41858
Low impedance ꢀ 105 °C
PAPR leads (Protection Against Polarity Reversal)
These lead configurations ensure correct placement of the capacitor on the PCB with regard to
polarity. PAPR leads are available for diameters from 10 mm up to 20 mm.
There are three configurations available: Crimped leads, J leads, bent 90° leads
Crimped leads
Last 3 digits of ordering code: 003
With stand-off rubber seal
With flat rubber seal
Suggestion for PCB hole diameter
Case size
d × l (mm)
16 × 20
16 × 25
16 × 31.5
18 × 20
18 × 25
18 × 31.5
18 × 35
18 × 40
20 × 20
20 × 25
20 × 30
20 × 35
20 × 40
Dimensions (mm)
B ±0.2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
C ±0.5
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
D ±0.1
E ±0.1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
a ±0.5
b
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.6
1.6
1.6
1.6
1.6
7.5
7.5
0.8 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
1.0 ±0.1
1.0 ±0.1
1.0 ±0.1
1.0 ±0.1
1.0 ±0.1
7.5
7.5
7.5
7.5
7.5
7.5
10.0
10.0
10.0
10.0
10.0
Please read Cautions and warnings and
Important notes at the end of this document.
Page 23 of 33
B41858
Low impedance ꢀ 105 °C
J leads
Last 3 digits of ordering code: 004
Suggestion for PCB hole diameter
Case size
d × l (mm)
10 × 12.5
10 × 16
Dimensions (mm)
C ±0.5
3.2
3.2
3.2
3.2
3.2
3.5
3.5
3.5
3.5
3.5
3.5
3.5
E ±0.5
J ±0.2
1.2
1.2
1.2
1.2
1.2
1.6
1.6
1.6
1.6
1.6
1.6
1.6
a ±0.5
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
b
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.6 ±0.05
0.6 ±0.05
0.6 ±0.05
0.6 ±0.05
0.6 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
10 × 20
12.5 × 20
12.5 × 25
16 × 20
16 × 25
16 × 31.5
18 × 20
18 × 25
18 × 31.5
18 × 35
Please read Cautions and warnings and
Important notes at the end of this document.
Page 24 of 33
B41858
Low impedance ꢀ 105 °C
Bent 90° leads for horizontal mounting pinning
Last 3 digits of ordering code: 012
Case size
d × l (mm)
16 × 20
Dimensions (mm)
C ±0.5
4.0
E ±0.5
F ±0.5
12.0
12.0
12.0
13.0
13.0
13.0
13.0
13.0
a ±0.5
7.5
b
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
0.8 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
16 × 25
4.0
7.5
16 × 31.5
18 × 20
4.0
7.5
4.0
7.5
18 × 25
4.0
7.5
18 × 31.5
18 × 35
4.0
7.5
4.0
7.5
18 × 40
4.0
7.5
Bent leads for diameter 12.5 mm available upon request.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 25 of 33
B41858
Low impedance ꢀ 105 °C
Overview of packing units and code numbers for case sizes 5 × 11 ... 16 × 31.5
PAPR
Case size
d × l
Stan- Taped,
dard, Ammo pack
bulk
Kinked Cut
Crimped J leads, Bent 90°
leads,
bulk
leads, leads,
blister leads,
bulk
pcs.
ꢀ
blister
pcs.
ꢀ
blister
pcs.
mm
pcs.
pcs.
pcs.
pcs.
ꢀ
5 × 11
2000 2000
2500 2000
1000 1000
1000 750
1000 500
ꢀ
6.3 × 11
8 × 11.5
10 × 12.5
10 × 16
10 × 20
12.5 × 20
12.5 × 25
12.5 × 30
12.5 × 35
12.5 × 40
16 × 20
16 × 25
16 × 31.5
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
1000
1000
500
350
500
ꢀ
ꢀ
675
675
500
300
225
ꢀ
ꢀ
ꢀ
500
350
250
200
175
175
250
250
200
500
500
350
500
ꢀ
ꢀ
1)
1)
500
ꢀ
500
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
300
200
200
250
001
200
200
250
002
200
200
344
003
200
200
344
004
120
120
120
012
300
300
The last three 000
digits of the
complete
ordering code
state the lead
configuration
Code F (mm) d (mm)
006
007
008
009
3.5
2.5
5
8
5...6.3
5...12.5
16...18
7.5
1) Available upon request
Please read Cautions and warnings and
Important notes at the end of this document.
Page 26 of 33
B41858
Low impedance ꢀ 105 °C
Overview of packing units and code numbers for case sizes 18 × 20 ... 25 × 40
PAPR
Case size
d × l
Stan- Taped,
dard, Ammo pack
bulk
Kinked Cut
Crimped J leads, Bent 90°
leads,
bulk
leads, leads,
blister leads,
bulk
pcs.
175
150
100
100
100
125
125
100
100
100
100
100
100
ꢀ
blister
pcs.
200
200
150
150
120
200
200
120
120
120
ꢀ
blister
pcs.
120
120
120
150
72
mm
pcs.
175
150
100
100
125
125
125
100
100
100
80
pcs.
pcs.
pcs.
200
200
150
150
ꢀ
18 × 20
18 × 25
18 × 31.5
18 × 35
18 × 40
20 × 20
20 × 25
20 × 30
20 × 35
20 × 40
22 × 30
22 × 35
22 × 40
25 × 40
250
175
150
100
100
100
ꢀ
250
250
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
80
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
80
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
40
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
The last three 000
digits of the
complete
ordering code
state the lead
configuration
Code F (mm) d (mm)
001
002
003
004
012
007
008
009
2.5
5
7.5
4...6.3
6.3...12.5
16...18
Please read Cautions and warnings and
Important notes at the end of this document.
Page 27 of 33
B41858
Low impedance ꢀ 105 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling Al electrolytic capacitors:
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 28 of 33
B41858
Low impedance ꢀ 105 °C
Product safety
The table below summarize the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Safety information
Reference
Chapter "General
technical information"
Polarity
Make sure that polar capacitors are connected
with the right polarity.
1
"Basic construction of
aluminum electrolytic
capacitors"
Reverse voltage
Voltages polarity classes should be prevented by 3.1.6
connecting a diode.
"Reverse voltage"
Upper category
temperature
Do not exceed the upper category temperatur.
7.2
"Maximum permissible
operating temperature"
Maintenance
Make periodic inspections of the capacitors.
10
Before the inspection, make sure that the power "Maintenance"
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Mounting
position of screw
terminal capacitors
Do not mount the capacitor with the terminals
(safety vent) upside down.
11.1
"Mounting positions of
capacitors with screw
terminals"
Mounting of
single-ended
capacitors
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
Robustness of
terminals
The following maximum tightening torques must
not be exceeded when connecting screw
11.3
"Mounting torques"
terminals:
M5: 2 Nm
M6: 2.5 Nm
Soldering
Do not exceed the specified time or temperature 11.5
limits during soldering. "Soldering"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 29 of 33
B41858
Low impedance ꢀ 105 °C
Topic
Safety information
Reference
Chapter "General
technical information"
Soldering,
Do not allow halogenated hydrocarbons to come 11.6
cleaning agents
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Passive
Avoid external energy, such as fire or electricity.
8.1
flammability
"Passive flammability"
Active
Avoid overload of the capacitors.
8.2
flammability
"Active flammability"
Reference
Chapter "Capacitors
with screw terminals"
Breakdown strength Do not damage the insulating sleeve, especially
"Screw terminals -
accessories"
of insulating
sleeves
when ring clips are used for mounting.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 30 of 33
B41858
Low impedance ꢀ 105 °C
Symbols and terms
Symbol English
German
C
Capacitance
Kapazität
CR
Rated capacitance
Nennkapazität
CS
Series capacitance
Serienkapazität
CS,T
Cf
Series capacitance at temperature T
Capacitance at frequency f
Case diameter, nominal dimension
Maximum case diameter
Self-inductance
Serienkapazität bei Temperatur T
Kapazität bei Frequenz f
Gehäusedurchmesser, Nennmaß
Maximaler Gehäusedurchmesser
Eigeninduktivität
d
dmax
ESL
ESR
ESRf
Equivalent series resistance
Equivalent series resistance at
frequency f
Ersatzserienwiderstand
Ersatzserienwiderstand bei Frequenz f
ESRT
Equivalent series resistance at
temperature T
Ersatzserienwiderstand bei Temperatur T
f
Frequency
Frequenz
I
Current
Strom
IAC
Alternating current (ripple current)
Root-mean-square value of alternating
current
Wechselstrom
Wechselstrom, Effektivwert
IAC,rms
IAC,f
Ripple current at frequency f
Maximum permissible ripple current
Rated ripple current
Wechselstrom bei Frequenz f
Maximal zulässiger Wechselstrom
Nennwechselstrom
IAC,max
IAC,R
IAC,R (B) Rated ripple current for base cooling
Nennwechselstromstrom für Bodenkühlung
Ableitstrom
Ileak
Ileak,op
l
Leakage current
Operating leakage current
Case length, nominal dimension
Maximum case length (without
terminals and mounting stud)
Resistance
Ableitstrom bei Betrieb
Gehäuselänge, Nennmaß
Maximale Gehäuselänge (ohne Anschlüsse
und Gewindebolzen)
lmax
R
Widerstand
Rins
Rsymm
T
Insulation resistance
Balancing resistance
Temperature
Isolationswiderstand
Symmetrierwiderstand
Temperatur
∆T
TA
TC
TB
t
Temperature difference
Ambient temperature
Case temperature
Temperaturdifferenz
Umgebungstemperatur
Gehäusetemperatur
Capacitor base temperature
Time
Temperatur des Becherbodens
Zeit
∆t
Period
Zeitraum
tb
Service life (operating hours)
Brauchbarkeitsdauer (Betriebszeit)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 31 of 33
B41858
Low impedance ꢀ 105 °C
Symbol English
German
V
Voltage
Spannung
VF
Vop
VR
VS
XC
XL
Z
Forming voltage
Formierspannung
Operating voltage
Rated voltage, DC voltage
Surge voltage
Betriebsspannung
Nennspannung, Gleichspannung
Spitzenspannung
Capacitive reactance
Inductive reactance
Impedance
Kapazitiver Blindwiderstand
Induktiver Blindwiderstand
Scheinwiderstand
ZT
tan δ
λ
Impedance at temperature T
Dissipation factor
Scheinwiderstand bei Temperatur T
Verlustfaktor
Failure rate
Ausfallrate
ε0
Absolute permittivity
Relative permittivity
Angular velocity; 2 ꢁ π ꢁ f
Elektrische Feldkonstante
Dielektrizitätszahl
εr
ω
Kreisfrequenz; 2 ꢁ π ꢁ f
Notes
All dimensions are given in mm.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 32 of 33
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Ma-
terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-
tailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the fore-
going for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the "General Terms of Delivery for Products and Services in the Electrical In-
dustry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK,
MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap,
SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on
the Internet at www.epcos.com/trademarks.
Page 33 of 33
相关型号：
©2020 ICPDF网 联系我们和版权申明