B39162B3522U410 [EPCOS]

SAW Components; 声表面波元件
B39162B3522U410
型号: B39162B3522U410
厂家: EPCOS    EPCOS
描述:

SAW Components
声表面波元件

SAW滤波器 过滤器 LTE
文件: 总7页 (文件大小:64K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
SAW Components  
SAW RF filter  
GPS  
Series/type:  
B3522  
Ordering code:  
B39162B3522U410  
Date:  
Version:  
November 10, 2009  
2.4  
EPCOS AG 2009. Reproduction, publication and dissemination of this data sheet, enclosures  
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.  
SAW Components  
SAW RF filter  
Data sheet  
B3522  
1575.42 MHz  
Application  
Low-loss RF filter for GPS application  
No matching network required for operation at 50  
Features  
Package size 3.0 x 3.0 x 1.1 mm3  
Package code DCC6C  
RoHS compatible  
Approximate weight 0.037 g  
Package for Surface Mount Technology  
(SMT)  
Ni, gold-plated terminals  
Lead free soldering compatible with J - STD20C  
AEC-Q200 qualified component family  
Electrostatic Sensitive Device (ESD)  
Pin configuration  
2  
Input  
5  
1,3,4,6  
Output  
Ground  
Please read cautions and warnings and  
important notes at the end of this document.  
2
November 10, 2009  
SAW Components  
SAW RF filter  
Data sheet  
B3522  
1575.42 MHz  
Characteristics  
Temperature range for specification:  
Terminating source impedance:  
Terminating load impedance:  
T
ZS  
ZL  
= –40 ˚C to +85 ˚C  
=
=
50Ω  
50 Ω  
min.  
typ.  
max.  
@ 25 ˚C  
1575.42  
Center frequency  
fC  
αmax  
MHz  
dB  
Maximum insertion attenuation  
1574.397 ... 1576.443MHz  
1.6  
0.2  
2.0  
0.8  
Amplitude ripple (p-p)  
∆α  
1574.397 ... 1576.443MHz  
dB  
Input VSWR  
1574.397 ... 1576.443MHz  
Output VSWR  
1.4  
1.3  
1.8  
1.8  
1574.397 ... 1576.443MHz  
Attenuation  
α
10.00 ... 1450.00 MHz  
1450.00 ... 1500.00 MHz  
1625.00 ... 1640.00 MHz  
1640.00 ... 1800.00 MHz  
1800.00 ... 2000.00 MHz  
2000.00 ... 3000.00 MHz  
40  
35  
35  
44  
42  
30  
43  
45  
50  
47  
44  
35  
dB  
dB  
dB  
dB  
dB  
dB  
Please read cautions and warnings and  
important notes at the end of this document.  
3
November 10, 2009  
SAW Components  
SAW RF filter  
Data sheet  
B3522  
1575.42 MHz  
Characteristics  
Temperature range for specification:  
Terminating source impedance:  
Terminating load impedance:  
T
ZS  
ZL  
= –40 ˚C to+105 ˚C  
=
=
50Ω  
50 Ω  
min.  
typ.  
max.  
@ 25 ˚C  
1575.42  
Center frequency  
fC  
αmax  
MHz  
dB  
Maximum insertion attenuation  
1574.397 ... 1576.443MHz  
1.6  
0.2  
2.2  
1.0  
Amplitude ripple (p-p)  
∆α  
1574.397 ... 1576.443MHz  
dB  
Input VSWR  
1574.397 ... 1576.443MHz  
Output VSWR  
1.4  
1.3  
1.9  
1.9  
1574.397 ... 1576.443MHz  
Attenuation  
α
10.00 ... 1450.00 MHz  
1450.00 ... 1500.00 MHz  
1625.00 ... 1640.00 MHz  
1640.00 ... 1800.00 MHz  
1800.00 ... 2000.00 MHz  
2000.00 ... 3000.00 MHz  
40  
33  
35  
44  
42  
30  
43  
45  
50  
47  
44  
35  
dB  
dB  
dB  
dB  
dB  
dB  
Maximum ratings  
Operable temperature range T  
Storage temperature range Tstg  
–40/+125 ˚C  
–40/+125 ˚C  
DC voltage  
VDC  
PS  
6
V
Source power  
10  
20  
dBm  
dBm  
source impedance 50 Ω  
824 MHz to 915 MHz,  
1710 MHz to 1785 MHz,  
1850 MHz to 1910 MHz  
Please read cautions and warnings and  
important notes at the end of this document.  
4
November 10, 2009  
SAW Components  
SAW RF filter  
Data sheet  
B3522  
1575.42 MHz  
Transfer function  
Transfer function (wideband)  
Please read cautions and warnings and  
important notes at the end of this document.  
5
November 10, 2009  
SAW Components  
SAW RF filter  
Data sheet  
B3522  
1575.42 MHz  
References  
Type  
B3522  
Ordering code  
Marking and package  
Packaging  
B39162B3522U410  
C61157-A7-A67  
F61074-V8168-Z000  
L_1126  
Date codes  
B3522_NB.s2p  
S-parameters  
B3522_WB.s2p  
See file header for port/pin assignment table.  
Soldering profile  
RoHS compatible  
S_6001  
defined as compatible with the following documents:  
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT  
AND OF THE COUNCIL of 27 January 2003 on the restriction  
of the use of certain hazardous substances in electrical and  
electronic equipment. 2005/618/EC from April 18th, 2005,  
amending Directive 2002/95/EC of the European Parliament  
and of the Council for the purposes of establishing the maxi-  
mum concentration values for certain hazardous substances in  
electrical and electronic equipment."  
For further information please contact your local EPCOS sales office or visit our webpage at  
www.epcos.com .  
Published by EPCOS AG  
Surface Acoustic Wave Components Division  
P.O. Box 80 17 09, 81617 Munich, GERMANY  
EPCOS AG 2009. This brochure replaces the previous edition.  
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or  
the international Representatives.  
Due to technical requirements components may contain dangerous substances. For information on  
the type in question please also contact one of our Sales Offices.  
Please read cautions and warnings and  
important notes at the end of this document.  
6
November 10, 2009  
Important notes  
The following applies to all products named in this publication:  
1. Some parts of this publication contain statements about the suitability of our products for  
certain areas of application. These statements are based on our knowledge of typical  
requirements that are often placed on our products in the areas of application concerned. We  
nevertheless expressly point out that such statements cannot be regarded as binding  
statements about the suitability of our products for a particular customer application.  
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar  
with them than the customers themselves. For these reasons, it is always ultimately  
incumbent on the customer to check and decide whether an EPCOS product with the  
properties described in the product specification is suitable for use in a particular customer  
application.  
2. We also point out that in individual cases, a malfunction of electronic components or  
failure before the end of their usual service life cannot be completely ruled out in the  
current state of the art, even if they are operated as specified. In customer applications  
requiring a very high level of operational safety and especially in customer applications in  
which the malfunction or failure of an electronic component could endanger human life or  
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by  
means of suitable design of the customer application or other action taken by the customer  
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained  
by third parties in the event of malfunction or failure of an electronic component.  
3. The warnings, cautions and product-specific notes must be observed.  
4. In order to satisfy certain technical requirements, some of the products described in this  
publication may contain substances subject to restrictions in certain jurisdictions (e.g.  
because they are classed as hazardous). Useful information on this will be found in our  
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more  
detailed questions, please contact our sales offices.  
5. We constantly strive to improve our products. Consequently, the products described in this  
publication may change from time to time. The same is true of the corresponding product  
specifications. Please check therefore to what extent product descriptions and specifications  
contained in this publication are still applicable before or when you place an order.  
We also reserve the right to discontinue production and delivery of products. Conse-  
quently, we cannot guarantee that all products named in this publication will always be  
available. The aforementioned does not apply in the case of individual agreements deviating  
from the foregoing for customer-specific products.  
6. Unless otherwise agreed in individual contracts, all orders are subject to the current  
version of the “General Terms of Delivery for Products and Services in the Electrical  
Industry” published by the German Electrical and Electronics Industry Association  
(ZVEI).  
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue,  
MiniCell, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap,  
SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K,  
ThermoFuse, WindCap are trademarks registered or pending in Europe and in other  
countries. Further information will be found on the Internet at www.epcos.com/trademarks.  
7
November 10, 2009  

相关型号:

B39162B3524B710

SAW Components
EPCOS

B39162B3525U510

SAW Components
EPCOS

B39162B3528U510

SAW RF filter GPS
EPCOS

B39162B3529U410

SAW Components
EPCOS

B39162B3913U410

Usable passband 56 MHz
EPCOS

B39162B3923U410

Package code DCC6C
EPCOS

B39162B4050U510

SAW RF filter GPS
EPCOS

B39162B4059U810

1 FUNCTIONS, 1575.42 MHz, SAW FILTER, ROHS COMPLIANT, SMD, QCC8D, 8 PIN
EPCOS

B39162B4060U810

SAW RF filter GPS
EPCOS

B39162B4300F210

SAW RF filter GPS
EPCOS

B39162B4308P810

Unbalanced to balanced operation
EPCOS

B39162B4310P810

Low insertion attenuation
EPCOS