B39151-B4856-Z710 [EPCOS]

SAW Filter, 1 Function(s), 148.05MHz;
B39151-B4856-Z710
型号: B39151-B4856-Z710
厂家: EPCOS    EPCOS
描述:

SAW Filter, 1 Function(s), 148.05MHz

LTE
文件: 总6页 (文件大小:80K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
SAW Components  
Data Sheet B4856  
SAW Components  
B4856  
Low Loss Filter for Mobile Communication  
Data Sheet  
148,05 MHz  
Ceramic package QCC10B  
Features  
Low-loss IF filter for mobile telephone  
Channel selection in AMPS/D-AMPS systems  
Filter surface passivated  
Balanced or unbalanced operation possible  
Package for Surface Mounted Technology (SMT)  
Terminals  
Ni, gold plated  
Dimensions in mm, approx. weight 0,23 g  
Pin configuration  
4
5
Balanced input or input ground  
Input  
9
10  
Balanced output or output ground  
Output  
1,3,6,8  
2,7  
Case ground  
Not connected  
Type  
Ordering code  
Marking and Package  
according to  
C61157-A7-A49  
Packing  
according to  
F61064-V8035-Z000  
B4856  
B39151-B4856-Z710  
Electrostatic Sensitive Device (ESD)  
Maximum ratings  
Operable temperature range T  
Storage temperature range Tstg  
– 30/+ 85  
– 40/+ 85  
13  
˚C  
˚C  
V
DC voltage  
VDC  
Ps  
Source power  
10  
dBm  
2
Feb 22, 2000  
SAW Components  
B4856  
Low Loss Filter for Mobile Communication  
148,05 MHz  
Data Sheet  
Characteristics  
Operating temperature range:  
Terminating source impedance:  
Terminating load impedance:  
T
= -30˚C ... 80˚C  
ZS = 400 || 2000 nH  
ZL = 400 || 2000 nH  
min.  
typ.  
max.  
fN  
148,05  
MHz  
kHz  
Nominal center frequency  
Filter bandwidth at -3 dB  
60  
Minimum insertion attenuation  
αmin  
4,6  
5,0 dB  
(including losses in the matching network)  
Amplitude ripple (p-p)  
∆α  
fN - 11 kHz .. fN + 11 kHz  
0,4  
0,8  
2,0 dB  
Group delay ripple (p-p)  
∆τ  
fN – 10,0 kHz ... fN + 10,0 kHz  
7,5 µs  
Relative attenuation (relative to αmin  
)
αrel  
fN - 1000kHz  
fN - 900 kHz  
fN - 900 kHz  
fN - 200 kHz  
fN - 120 kHz  
fN - 65 kHz  
...  
fN - 900 kHz  
65  
68  
50  
40  
15  
12  
12  
15  
40  
50  
63  
75  
75  
65  
49  
29  
25  
25  
29  
49  
65  
70  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
...  
...  
...  
...  
...  
...  
...  
...  
...  
fN - 200 kHz  
fN - 120 kHz  
fN - 65 kHz  
fN - 60 kHz  
fN + 65 kHz  
fN + 120 kHz  
fN + 200 kHz  
fN + 900 kHz  
fN + 1000 kHz  
fN + 60 kHz  
fN + 65 kHz  
fN + 120 kHz  
fN + 200 kHz  
fN + 900kHz  
Impedance within the passband  
Input: ZIN = RIN || CIN  
Output: ZOUT = ROUT || COUT  
400 || 0,6  
400 || 0,6  
|| pF  
|| pF  
Temperature coefficient of frequency 1)  
Turnover temperature  
TCf  
T0  
– 0,036  
25  
ppm/K2  
˚C  
1) Temperature dependance of fc: fc(T) = fc(T0)(1 + TCf(T T0)2)  
3
Feb 22, 2000  
SAW Components  
B4856  
Low Loss Filter for Mobile Communication  
Data Sheet  
148,05 MHz  
Recommended pin configurations / test matching networks:  
a) single-ended 50/ single-ended 50Ω  
LS1 = 150 nH  
CP2 = 3,9 pF  
CP3 = 3,9 pF  
LS4 = 150 nH  
Note :  
The level of ultimate suppression may be limited by electromagnetic feedthrough depending on  
the layout of the pcb and the arrangement of the matching components.  
The above mentioned characteristics can be realized either in balanced or in unbalanced mode  
of operation.  
To achieve the best performance it is recommended to drive at least one side of the filter bal-  
anced.  
For more details see S+M’s application note PCB Layout for Highly Selective IF Filters.  
4
Feb 22, 2000  
SAW Components  
B4856  
Low Loss Filter for Mobile Communication  
Data Sheet  
148,05 MHz  
Normalized transfer function (measured single ended / single ended)  
5
Feb 22, 2000  
SAW Components  
B4856  
Low Loss Filter for Mobile Communication  
Data Sheet  
148,05 MHz  
Published by EPCOS AG  
Surface Acoustic Wave Components Division, OFW E MF  
P.O. Box 80 17 09, D-81617 München  
EPCOS AG 1999. All Rights Reserved.  
As far as patents or other rights of third parties are concerned, liability is only assumed for compo-  
nents per se, not for applications, processes and circuits implemented within components or  
assemblies.  
The information describes the type of component and shall not be considered as assured  
characteristics.  
Terms of delivery and rights to change design reserved.  
For questions on technology, prices and delivery please contact the sales offices of EPCOS AG or  
the international representatives.  
Due to technical requirements components may contain dangerous substances. For information on  
the type in question please also contact one of our sales offices.  
6
Feb 22, 2000  

相关型号:

B39151-B4867-Z710

1 FUNCTIONS, 154.08MHz, SAW FILTER, CERAMIC, QCC-10
EPCOS

B39151-B4867-Z710

SAW Filter, 1 Function(s), 154.08MHz, CERAMIC, QCC-10
TDK

B39151-B5029-H510

SAW Components Low-Loss Filter 153,6 MHz
EPCOS

B39151B5206H810

SAW IF filter TD-SCDMA
EPCOS

B39151B5229Z510

SAW Filter, 1 Function(s), 145MHz, ROHS COMPLIANT, CERAMIC, QCC12, SMD, 12 PIN
EPCOS

B39151B5239H810

Wide band, low-loss IF filter for LTE
EPCOS

B39152-B1608-Z810

Low-Loss Filter
EPCOS

B39152-B1647-U510

SAW filter Satellite radio
EPCOS

B39152-B1656-B510

SAW RF low loss filter Satellite CSS
EPCOS

B39152-B1664-U410

SAW RF low loss filter DAB
EPCOS

B39152-B4066-U510

1542,0 MHz Low Loss Filter
EPCOS

B39152-B7828-C710

SAW Components Low-Loss Filter for Mobile Communication 1489,0 MHz
EPCOS