B37872A1473K070 [EPCOS]
CAPACITOR, CERAMIC, MULTILAYER, 100V, X7R, 0.047uF, SURFACE MOUNT, 1206, CHIP;型号: | B37872A1473K070 |
厂家: | EPCOS |
描述: | CAPACITOR, CERAMIC, MULTILAYER, 100V, X7R, 0.047uF, SURFACE MOUNT, 1206, CHIP PC 电容器 |
文件: | 总30页 (文件大小:183K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Multilayer Ceramic Capacitors
Series/Type: B37941
The following products presented in this data sheet are being withdrawn.
Ordering Code
Substitute Product
Date of Withdrawal Deadline Last
Orders
Last Shipments
B37931A0224K060
B37931A0224K070
B37941A0224K060
2008-08-01
2008-08-01
2008-08-01
2009-07-31
2009-07-31
2009-07-31
2009-10-31
2009-10-31
2009-10-31
Ordering Code
Substitute Product
Date of Withdrawal Deadline Last
Orders
Last Shipments
B37941A0224K070
B37941A0474K060
B37941A0474K070
B37941A0105K062
B37941A0105K072
2008-08-01
2008-08-01
2008-08-01
2008-08-01
2008-08-01
2009-07-31
2009-07-31
2009-07-31
2009-07-31
2009-07-31
2009-10-31
2009-10-31
2009-10-31
2009-10-31
2009-10-31
For further information please contact your nearest EPCOS sales office, which will also support you in selecting a
suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales.
Multilayer ceramic capacitors
Advanced series
Chip
General
Criteria for high reliability
For both OEMs and component manufacturers, high reliability is assured by consistent process
control. If it is assumed that the component manufacturer supplies a defect-free product, then fur-
ther correct processing by the customer forms the basis for perfect operation of the components
and thus the entire application. So the precondition for high quality is not exclusively a particular
“intermediate product“ (such as the ceramic capacitor) but rather the process control along the
entire production chain up to its end point. This requires a high degree of mutual process under-
standing between the various partners (e.g. component manufacturer and placement operator) and
the formulation of joint quality guidelines.
AEC-Q200 is a standard for quality requirements on components in various technologies. In view
of its general character, AEC-Q200 does not apply to every component to the same extent and thus
defines a minimum requirement on quality. AEC-Q200 stipulates the observance of limits that can
be checked by means of a good/bad decision. It therefore permits a qualitative statement but not a
quantitative one. However, it is precisely the latter that is important if we wish to approach “zero
defects”. So process control moves to center stage and becomes the decisive element for ensuring
and continuously improving the maximum possible reliability.
EPCOS has implemented this paradigm change and thus laid the foundation for a zero defect strat-
egy. This concept is integrated in the “ppb level assurance system“ and is particularly realized and
continuously developed further in the Advanced series.
The requirements made on the Advanced series exceed those of AEC-Q200. The criteria are clearly
oriented to the aim of achieving “zero defects”. An important precondition for high component reli-
ability is the production of the ceramic powder at our own plant. Only by knowing all the inter-
relationships and effects from the raw material to the completed component can the self-imposed
quality criteria actually be implemented in all production steps. EPCOS has been developing and
manufacturing its own ceramic powder for ceramic capacitors for many years so that the component
quality can be assured from the first step of manufacture.
ppb level assurance system
The precondition for reliability at ppb level is, apart from process knowledge, a high degree of pro-
cess control. To achieve this, the entire production process is subdivided systematically into sub-
processes that are continuously checked with static methods on the basis of quantifiable parame-
ters. These analysis methods are used by EPCOS within the scope of the Advanced series for all
production steps from ceramic powder production and component design up to the 100% electrical
testing.
Please read Cautions and warnings and
Important notes at the end of this document.
2
10/06
Multilayer ceramic capacitors
Advanced series
Chip
In summary, the ppb level assurance system involves the following points:
■ Statistical methods for component design and process control
■ Use of the Weibull method for statistical data analysis
■ Introduction of quantifiable parameters (such as the failure time) to replace the previous “good”
or “bad” decisions
■ Dynamic test limits as a complement to fixed limits in the 100% electrical test
(capacitance C, loss factor tan ꢀ, insulation resistance Rins)
■ Periodic check of the solder-shock resistance at 360 LC, followed by a burn-in test or HALT
■ Periodic check of the bending strength by the rigorous piezoelectric method (ꢁI measurement)
for X7R
■ A more accurate characterization of the mechanical properties by eliminating impacting factors
by taking measurements on the sintered component
■ 100% automatic optical inspection (AOI)
■ Ultrasound analysis allowing an internal defect in the ceramic capacitor to be detected in a non-
destructive way
High temperature application:
The listed Advanced series types can be used at 100% rated DC voltage up to 125 °C. Operation
of Advanced capacitors at temperatures >125 °C up to 150 °C is permissible if the applied voltage
is reduced according to the derating diagram below proceeding from a stress level of 100% rated
voltage at 125 °C.
Note:
To achieve highest reliability levels it is generally recommended not to operate ceramic capacitors
continuously at 100% rated voltage. Please see chapter “Reliability” for recommended operating
voltage and calculation of failure rates.
KKE0433-M-E
100
%
90
C0G and X7R NME
80
X7R BME and HighCV
70
60
50
125
130
135
140
145
C 150
˚
T
Please read Cautions and warnings and
Important notes at the end of this document.
3
10/06
Multilayer ceramic capacitors
Advanced series; C0G
Chip
Ordering code system
B37940
A
5
010
C
5
60
Packaging
^
60 cardboard tape, 180-mm reel
^
62 blister tape, 180-mm reel
^
70 cardboard tape, 330-mm reel
^
72 blister tape, 330-mm reel
Decimal place for cap. values <10 pF, otherwise 0
Capacitance tolerance
^
^
C
C
<10 pF:
O10 pF:
C
J
0.25 pF (standard for capacitance values <10 pF)
5% (standard)
R
R
Capacitance, coded 010
1 · 100 pF = 1 pF
^
0
^
(example)
100 10 · 10 pF = 10 pF
221 22 · 10 pF = 220 pF
1
^
Rated voltage
Rated voltage [VDC] 50
100
1
Code
5
Internal coding
“A” indicates Advanced series
Type and size
Chip size
(inch / mm)
Temperature characteristic
C0G
0402 / 1005
0603 / 1608
0805 / 2012
1206 / 3216
B37920
B37930
B37940
B37871
Please read Cautions and warnings and
Important notes at the end of this document.
4
10/06
Multilayer ceramic capacitors
Advanced series; X7R
Chip
Ordering code system
B37941
A
5
102
K
0
60
Packaging
^
60 cardboard tape, 180-mm reel
^
62 blister tape, 180-mm reel
^
70 cardboard tape, 330-mm reel
^
72 blister tape, 330-mm reel
Internal coding
Capacitance tolerance
^
K
10% (standard)
2
^
^
^
Capacitance, coded 102 10 · 10 pF = 1 nF
(example)
4
104 10 · 10 pF = 100 nF
3
223 22 · 10 pF = 22 nF
Rated voltage
Rated voltage [VDC] 25
50
5
100
1
Code
0
Internal coding
“A” indicates Advanced series
Type and size
Chip size
(inch / mm)
Temperature characteristic
X7R
0603 / 1608
0805 / 2012
1206 / 3216
B37931
B37941
B37872
Please read Cautions and warnings and
Important notes at the end of this document.
5
10/06
Multilayer ceramic capacitors
Advanced series; C0G and X7R
Chip
Features
■ ppb level assurance system
■ Optimized bending and solder-shock strength due
to simultaneous availability of BME and NME technologies
■ May be used at temperatures of up to 150 LC
■ Short-term use up to 175 LC without electrical stressing possible
■ Marking with date code
■ To AEC-Q200
Applications
■ Use in safety-relevant applications, e.g. in the automotive sector:
– ABS, ESP and airbag
■ Use in applications with particularly high quality requirements, e.g. in the automotive,
industrial, consumer and telecommunications industries:
– Mobile phone base stations
– High-end consumer electronics
Termination
■ For soldering: Nickel barrier terminations (Ni)
Options
■ Alternative capacitance tolerances available on request
Delivery mode
■ Cardboard and blister tape (blister tape for chip thickness O1.2 M0.1 mm),
180-mm and 330-mm reel available
Electrical data C0G
Temperature characteristic
Climatic category (IEC 60068-1)
Standard
C0G
55/125/56
EIA
Dielectric
Class 1
Rated voltage
VR
50, 100
VDC
Test voltage
Vtest
CR
2.5 · VR/5 s
1 pF … 4.7 nF (E6)
0 M 30 · 10–6/K
<1.0 · 10–3
>105
>104
>1000
>100
–55 … +125
none
VDC
Capacitance range / E series
Temperature coefficient
Dissipation factor (limit value)
Insulation resistance1) at + 25 LC
Insulation resistance1) at +125 LC
Time constant1) at + 25 LC
Time constant1) at +125 LC
Operating temperature range
Ageing
tan ꢀ
Rins
Rins
ꢃ
Mꢂ
Mꢂ
s
s
LC
ꢃ
Top
1) For C >10 nF the time constant ꢀ = C · R is given.
R
ins
Please read Cautions and warnings and
Important notes at the end of this document.
6
10/06
Multilayer ceramic capacitors
Advanced series; C0G and X7R
Advanced
series
Electrical data X7R
Temperature characteristic
Max. relative capacitance change
within –55 LC to +125 LC
Climatic category (IEC 60068-1)
Standard
X7R
ꢁC/C M15
55/125/56
EIA
%
Dielectric
Rated voltage
Test voltage
Class 2
25; 50; 100
1)
V
V
VDC
VDC
R
2.5 · V /5 s
test
R
Capacitance range / E series
Dissipation factor (limit value)
C
1 nF … 1 ꢄF (E6)
R
–3
–3
tan ꢀ <25 · 10 / <50 · 10 for 25 V
2)
5
Insulation resistance at + 25 LC
R
R
ꢃ
>10
>10
Mꢂ
Mꢂ
s
ins
ins
2)
4
Insulation resistance at +125 LC
2)
Time constant at + 25 LC
>1000
>100
2)
Time constant at +125 LC
ꢃ
s
Operating temperature range
T
–55 … +125
yes
LC
op
3)
Ageing
Capacitance tolerances C0G
Capacitance tolerances X7R
C <10 pF
C O10 pF
R
R
Code letter
Tolerance
C (standard)
M0.25 pF
J (standard)
M5%
Code letter
Tolerance
K (standard)
M10%
Dimensional drawing
b
k
k
KKE0329-N
Dimensions (mm)
Case size inch / mm
0402 / 1005
1.0 M0.10
0.5 M0.05
0.5 M0.05
0.1 –0.40
0603 / 1608
1.6 M0.15
0.8 M0.10
0.8 M0.10
0.1 –0.40
0805 / 2012
1206 / 3216
l
2.00 M0.20
1.25 M0.15
1.30 max.
0.13 –0.75
3.20 M0.20
1.60 M0.15
1.30 max.
0.25 –0.75
b
s
k
Tolerances to CECC 32101-801
1) Note: No operation on AC line.
2) For C >10 nF the time constant ꢀ = C · R is given.
R
ins
3) Refer to chapter “General technical information”, “Ageing”.
Please read Cautions and warnings and
Important notes at the end of this document.
7
10/06
Multilayer ceramic capacitors
Advanced series; C0G and X7R
Advanced
series
Recommended solder pad
D
KKE0308-1
Recommended dimensions (mm) for reflow soldering
Case size
(inch/mm)
Type
A
C
D
0402/1005
0603/1608
0805/2012
1206/3216
single chip
single chip
single chip
single chip
0.35 … 0.45 1.0 … 1.40
0.60 … 0.70 1.8 … 2.20
0.60 … 0.70 2.2 … 2.60
0.80 … 0.90 3.8 … 4.32
0.4 … 0.6
0.6 … 0.8
0.8 … 1.1
1.0 … 1.4
Recommended dimensions (mm) for wave soldering
Case size
(inch/mm)
Type
A
C
D
0603/1608
0805/2012
1206/3216
single chip
single chip
single chip
0.8 … 0.9
0.9 … 1.0
1.0 … 1.1
2.2 … 2.8
2.8 … 3.2
4.2 … 4.8
0.6 … 0.8
0.8 … 1.1
1.0 … 1.4
Termination
Ceramic body
Termination
(nickel barrier)
NME BME HighCV
AgPd Ni Ni
Inner electrode
NME BME HighCV
Substrate electrode
Intermediate electrode
External electrode
Ag
Ni
Cu
Ni
Cu
Ni
Sn
Sn
Sn
NME: Noble Metal Electrode
BME: Base Metal Electrode
KKE0424-N-E
Please read Cautions and warnings and
Important notes at the end of this document.
8
10/06
Multilayer ceramic capacitors
Advanced series; C0G
Advanced
series
Product range for Advanced series chip capacitors, C0G
1)
Size
inch
0402
0603
0805
1206
mm
1005
1608
2012
3216
Type
B37920
B37930
B37940
B37871
V (VDC)
R
50
50
100
50
100
50
100
C
R
1.0 pF
2.2 pF
3.3 pF
4.7 pF
6.8 pF
10 pF
15 pF
22 pF
33 pF
47 pF
68 pF
100 pF
220 pF
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
1) l P b (inch) / l P b (mm)
Please read Cautions and warnings and
Important notes at the end of this document.
9
10/06
Multilayer ceramic capacitors
Advanced series; X7R
Advanced
series
Product range for Advanced series chip capacitors, X7R
1)
Size
inch
0603
0805
1206
mm
1608
2012
3216
Type
B37931
B37941
B37872
V (VDC)
R
25
50
100
25
50
100
50
100
C
R
1.0 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
15 nF
22 nF
33 nF
47 nF
68 nF
100 nF
220 nF
330 nF
470 nF
1.0 ꢄF
▲
▲
▲
▲
▲
▲ = HighCV
1) l P b (inch) / l P b (mm)
Please read Cautions and warnings and
Important notes at the end of this document.
10 10/06
Multilayer ceramic capacitors
Advanced series; C0G; 0402
Advanced
series
Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations
Case size 0402, 50 VDC
Chip thickness
Cardboard tape,
Cardboard tape,
b 180-mm reel
b 330-mm reel
^
^
** 60
** 70
1)
C
Ordering code
mm
pcs/reel
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
pcs/reel
50000
50000
50000
50000
50000
50000
50000
50000
50000
50000
R
3.3 pF
4.7 pF
6.8 pF
B37920A5030C3** 0.5 M0.05
B37920A5040C7** 0.5 M0.05
B37920A5060C8** 0.5 M0.05
B37920A5100J0** 0.5 M0.05
B37920A5150J0** 0.5 M0.05
B37920A5220J0** 0.5 M0.05
B37920A5330J0** 0.5 M0.05
B37920A5470J0** 0.5 M0.05
B37920A5680J0** 0.5 M0.05
B37920A5101J0** 0.5 M0.05
10. pF
15. pF
22. pF
33. pF
47. pF
68. pF
100. pF
1) Other capacitance values on request.
Please read Cautions and warnings and
Important notes at the end of this document.
11 10/06
Multilayer ceramic capacitors
Advanced series; C0G; 0603
Advanced
series
Ordering codes and packing for C0G, 50 and 100 VDC, nickel barrier terminations
Case size 0603, 50 VDC
Chip thickness
Cardboard tape,
Cardboard tape,
b 180-mm reel
b 330-mm reel
^
^
** 60
** 70
1)
C
Ordering code
mm
pcs/reel
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
pcs/reel
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
R
1.0 pF
1.5 pF
2.2 pF
3.3 pF
4.7 pF
6.8 pF
B37930A5010C0** 0.8 M0.1
B37930A5010C5** 0.8 M0.1
B37930A5020C2** 0.8 M0.1
B37930A5030C3** 0.8 M0.1
B37930A5040C7** 0.8 M0.1
B37930A5060C8** 0.8 M0.1
B37930A5100J0** 0.8 M0.1
B37930A5150J0** 0.8 M0.1
B37930A5220J0** 0.8 M0.1
B37930A5330J0** 0.8 M0.1
B37930A5470J0** 0.8 M0.1
B37930A5680J0** 0.8 M0.1
B37930A5101J0** 0.8 M0.1
B37930A5151J0** 0.8 M0.1
B37930A5221J0** 0.8 M0.1
B37930A5331J0** 0.8 M0.1
B37930A5471J0** 0.8 M0.1
10. pF
15. pF
22. pF
33. pF
47. pF
68. pF
100. pF
150. pF
220. pF
330. pF
470. pF
Case size 0603, 100 VDC
1.0 pF
1.5 pF
2.2 pF
3.3 pF
4.7 pF
B37930A1010C0** 0.8 M0.1
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
B37930A1010C5** 0.8 M0.1
B37930A1020C2** 0.8 M0.1
B37930A1030C3** 0.8 M0.1
B37930A1040C7** 0.8 M0.1
B37930A1060C8** 0.8 M0.1
B37930A1100J0** 0.8 M0.1
B37930A1150J0** 0.8 M0.1
B37930A1220J0** 0.8 M0.1
B37930A1330J0** 0.8 M0.1
B37930A1470J0** 0.8 M0.1
B37930A1680J0** 0.8 M0.1
B37930A1101J0** 0.8 M0.1
B37930A1151J0** 0.8 M0.1
B37930A1221J0** 0.8 M0.1
6.8 pF
10. pF
15. pF
22. pF
33. pF
47. pF
68. pF
100. pF
150. pF
220. pF
1) Other capacitance values on request.
Please read Cautions and warnings and
Important notes at the end of this document.
12 10/06
Multilayer ceramic capacitors
Advanced series; C0G; 0805
Advanced
series
Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations
Case size 0805, 50 VDC
Chip thickness
Cardboard tape,
Cardboard tape,
b 180-mm reel
b 330-mm reel
^
^
** 60
** 70
1)
C
Ordering code
mm
pcs/reel
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
4000
pcs/reel
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
16000
R
1.0 pF
1.5 pF
2.2 pF
3.3 pF
4.7 pF
6.8 pF
B37940A5010C0** 0.6 M0.1
B37940A5010C5** 0.6 M0.1
B37940A5020C2** 0.6 M0.1
B37940A5030C3** 0.6 M0.1
B37940A5040C7** 0.6 M0.1
B37940A5060C8** 0.6 M0.1
B37940A5100J0** 0.6 M0.1
B37940A5150J0** 0.6 M0.1
B37940A5220J0** 0.6 M0.1
B37940A5330J0** 0.6 M0.1
B37940A5470J0** 0.6 M0.1
B37940A5680J0** 0.6 M0.1
B37940A5101J0** 0.6 M0.1
B37940A5151J0** 0.6 M0.1
B37940A5221J0** 0.6 M0.1
B37940A5331J0** 0.6 M0.1
B37940A5471J0** 0.6 M0.1
B37940A5681J0** 0.6 M0.1
B37940A5102J0** 0.6 M0.1
B37940A5152J0** 0.8 M0.1
B37940A5222J0** 1.2 M0.1
10. pF
15. pF
22. pF
33. pF
47. pF
68. pF
100. pF
150. pF
220. pF
330. pF
470. pF
680. pF
1.0 nF
1.5 nF
2.2 nF
2)
3)
3000
12000
1) Other capacitance values on request.
2) Blister tape, 180-mm reel, ordering code ** 62
3) Blister tape, 330-mm reel, ordering code ** 72
^
^
Please read Cautions and warnings and
Important notes at the end of this document.
13 10/06
Multilayer ceramic capacitors
Advanced series; C0G; 0805
Advanced
series
Ordering codes and packing for C0G, 100 VDC, nickel barrier terminations
Case size 0805, 100 VDC
Chip thickness
Cardboard tape,
Cardboard tape,
b 180-mm reel
b 330-mm reel
^
^
** 60
** 70
1)
C
Ordering code
mm
pcs/reel
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
4000
pcs/reel
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
16000
R
1.0 pF
1.5 pF
2.2 pF
3.3 pF
4.7 pF
6.8 pF
B37940A1010C0** 0.6 M0.1
B37940A1010C5** 0.6 M0.1
B37940A1020C2** 0.6 M0.1
B37940A1030C3** 0.6 M0.1
B37940A1040C7** 0.6 M0.1
B37940A1060C8** 0.6 M0.1
B37940A1100J0** 0.6 M0.1
B37940A1150J0** 0.6 M0.1
B37940A1220J0** 0.6 M0.1
B37940A1330J0** 0.6 M0.1
B37940A1470J0** 0.6 M0.1
B37940A1680J0** 0.6 M0.1
B37940A1101J0** 0.6 M0.1
B37940A1151J0** 0.6 M0.1
B37940A1221J0** 0.6 M0.1
B37940A1331J0** 0.6 M0.1
B37940A1471J0** 0.6 M0.1
B37940A1681J0** 0.8 M0.1
B37940A1102J0** 1.2 M0.1
10. pF
15. pF
22. pF
33. pF
47. pF
68. pF
100. pF
150. pF
220. pF
330. pF
470. pF
680. pF
1.0 nF
2)
3)
3000
12000
1) Other capacitance values on request.
2) Blister tape, 180-mm reel, ordering code ** 62
3) Blister tape, 330-mm reel, ordering code ** 72
^
^
Please read Cautions and warnings and
Important notes at the end of this document.
14 10/06
Multilayer ceramic capacitors
Advanced series; C0G; 1206
Advanced
series
Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations
Case size 1206, 50 VDC
Chip thickness
Cardboard tape,
Cardboard tape,
b 180-mm reel
b 330-mm reel
^
^
** 60
** 70
1)
C
Ordering code
mm
pcs/reel
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
pcs/reel
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
R
1.0 pF
1.5 pF
2.2 pF
3.3 pF
4.7 pF
6.8 pF
B37871A5010C0** 0.8 M0.1
B37871A5010C5** 0.8 M0.1
B37871A5020C2** 0.8 M0.1
B37871A5030C3** 0.8 M0.1
B37871A5040C7** 0.8 M0.1
B37871A5060C8** 0.8 M0.1
B37871A5100J0** 0.8 M0.1
B37871A5150J0** 0.8 M0.1
B37871A5220J0** 0.8 M0.1
B37871A5330J0** 0.8 M0.1
B37871A5470J0** 0.8 M0.1
B37871A5680J0** 0.8 M0.1
B37871A5101J0** 0.8 M0.1
B37871A5151J0** 0.8 M0.1
B37871A5221J0** 0.8 M0.1
B37871A5331J0** 0.8 M0.1
B37871A5471J0** 0.8 M0.1
B37871A5681J0** 0.8 M0.1
B37871A5102J0** 0.8 M0.1
B37871A5152J0** 0.8 M0.1
B37871A5222J0** 0.8 M0.1
B37871A5332J0** 0.8 M0.1
B37871A5472J0** 1.2 M0.1
10. pF
15. pF
22. pF
33. pF
47. pF
68. pF
100. pF
150. pF
220. pF
330. pF
470. pF
680. pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
2)
3)
3000
12000
1) Other capacitance values on request.
2) Blister tape, 180-mm reel, ordering code ** 62
3) Blister tape, 330-mm reel, ordering code ** 72
^
^
Please read Cautions and warnings and
Important notes at the end of this document.
15 10/06
Multilayer ceramic capacitors
Advanced series; C0G; 1206
Advanced
series
Ordering codes and packing for C0G, 100 VDC, nickel barrier terminations
Case size 1206, 100 VDC
Chip thickness
Cardboard tape,
Cardboard tape,
b 180-mm reel
b 330-mm reel
^
^
** 60
** 70
1)
C
Ordering code
mm
pcs/reel
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
pcs/reel
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
R
1.0 pF
1.5 pF
2.2 pF
3.3 pF
4.7 pF
6.8 pF
B37871A1010C0** 0.8 M0.1
B37871A1010C5** 0.8 M0.1
B37871A1020C2** 0.8 M0.1
B37871A1030C3** 0.8 M0.1
B37871A1040C7** 0.8 M0.1
B37871A1060C8** 0.8 M0.1
B37871A1100J0** 0.8 M0.1
B37871A1150J0** 0.8 M0.1
B37871A1220J0** 0.8 M0.1
B37871A1330J0** 0.8 M0.1
B37871A1470J0** 0.8 M0.1
B37871A1680J0** 0.8 M0.1
B37871A1101J0** 0.8 M0.1
B37871A1151J0** 0.8 M0.1
B37871A1221J0** 0.8 M0.1
B37871A1331J0** 0.8 M0.1
B37871A1471J0** 0.8 M0.1
B37871A1681J0** 0.8 M0.1
B37871A1102J0** 0.8 M0.1
B37871A1152J0** 0.8 M0.1
B37871A1222J0** 1.2 M0.1
10. pF
15. pF
22. pF
33. pF
47. pF
68. pF
100. pF
150. pF
220. pF
330. pF
470. pF
680. pF
1.0 nF
1.5 nF
2.2 nF
2)
3)
3000
12000
1) Other capacitance values on request.
2) Blister tape, 180-mm reel, ordering code ** 62
3) Blister tape, 330-mm reel, ordering code ** 72
^
^
Please read Cautions and warnings and
Important notes at the end of this document.
16 10/06
Multilayer ceramic capacitors
Advanced series; X7R; 0603
Advanced
series
Ordering codes and packing for X7R, 25, 50 and 100 VDC, nickel barrier terminations
Chip thickness
Cardboard tape, Cardboard tape,
b 180-mm reel
b 330-mm reel
^
^
** 60
** 70
1)
C
Ordering code
mm
pcs/reel
pcs/reel
R
Case size 0603, 25 VDC
68. nF
100. nF
220. nF
B37931A0683K0**
B37931A0104K0**
B37931A0224K0**
0.8 M0.1
0.8 M0.1
0.8 M0.1
4000
4000
4000
16000
16000
16000
2)
Case size 0603, 50 VDC
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
B37931A5102K0**
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
B37931A5152K0**
B37931A5222K0**
B37931A5332K0**
B37931A5472K0**
B37931A5682K0**
B37931A5103K0**
B37931A5153K0**
B37931A5223K0**
B37931A5333K0**
B37931A5473K0**
6.8 nF
10. nF
15. nF
22. nF
33. nF
47. nF
Case size 0603, 100 VDC
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
B37931A1102K0**
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
4000
4000
4000
4000
4000
16000
16000
16000
16000
16000
B37931A1152K0**
B37931A1222K0**
B37931A1332K0**
B37931A1472K0**
1) Other capacitance values on request.
2) HighCV type
Please read Cautions and warnings and
Important notes at the end of this document.
17 10/06
Multilayer ceramic capacitors
Advanced series; X7R; 0805
Advanced
series
Ordering codes and packing for X7R, 25, 50 and 100 VDC, nickel barrier terminations
Chip thickness
Cardboard tape, Cardboard tape,
b 180-mm reel
b 330-mm reel
^
^
** 60
** 70
1)
C
Ordering code
mm
pcs/reel
pcs/reel
R
Case size 0805, 25 VDC
2)
220. nF
330. nF
470. nF
1.0 ꢄF
B37941A0224K0**
0.8 M0.1
0.8 M0.1
0.8 M0.1
1.25 M0.1
4000
4000
4000
16000
16000
16000
2)
2)
2)
B37941A0334K0**
B37941A0474K0**
B37941A0105K0**
3)
4)
3000
12000
Case size 0805, 50 VDC
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
B37941A5102K0**
0.6 M0.1
0.6 M0.1
0.6 M0.1
0.6 M0.1
0.6 M0.1
0.6 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
5000
5000
5000
5000
5000
5000
4000
4000
4000
4000
4000
4000
4000
20000
20000
20000
20000
20000
20000
16000
16000
16000
16000
16000
16000
16000
B37941A5152K0**
B37941A5222K0**
B37941A5332K0**
B37941A5472K0**
B37941A5682K0**
B37941A5103K0**
B37941A5153K0**
B37941A5223K0**
B37941A5333K0**
B37941A5473K0**
B37941A5683K0**
B37941A5104K0**
6.8 nF
10. nF
15. nF
22. nF
33. nF
47. nF
68. nF
100. nF
Case size 0805, 100 VDC
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10. nF
15. nF
22. nF
B37941A1102K0**
0.6 M0.1
0.6 M0.1
0.6 M0.1
0.6 M0.1
0.6 M0.1
0.6 M0.1
0.6 M0.1
0.6 M0.1
0.8 M0.1
5000
5000
5000
5000
5000
5000
5000
5000
4000
20000
20000
20000
20000
20000
20000
20000
20000
16000
B37941A1152K0**
B37941A1222K0**
B37941A1332K0**
B37941A1472K0**
B37941A1682K0**
B37941A1103K0**
B37941A1153K0**
B37941A1223K0**
1) Other capacitance values on request.
2) HighCV type.
3) Blister tape, 180-mm reel, ordering code ** 62
^
^
4) Blister tape, 330-mm reel, ordering code ** 72
Please read Cautions and warnings and
Important notes at the end of this document.
18 10/06
Multilayer ceramic capacitors
Advanced series; X7R; 1206
Advanced
series
Ordering codes and packing for X7R, 50 and 100 VDC, nickel barrier terminations
Chip thickness
Cardboard tape, Cardboard tape,
b 180-mm reel
b 330-mm reel
^
^
** 60
** 70
1)
C
Ordering code
mm
pcs/reel
pcs/reel
R
Case size 1206, 50 VDC
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
B37872A5102K0**
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
1.2 M0.1
1.2 M0.1
1.2 M0.1
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
B37872A5152K0**
B37872A5222K0**
B37872A5332K0**
B37872A5472K0**
B37872A5682K0**
B37872A5103K0**
B37872A5153K0**
B37872A5223K0**
B37872A5333K0**
B37872A5473K0**
B37872A5683K0**
B37872A5104K0**
B37872A5224K0**
B37872A5334K0**
B37872A5474K0**
6.8 nF
10. nF
15. nF
22. nF
33. nF
47. nF
68. nF
100. nF
220. nF
330. nF
470. nF
2)
3)
3000
3000
3000
12000
12000
12000
2)
3)
2)
3)
Case size 1206, 100 VDC
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
B37872A1102K0**
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
0.8 M0.1
1.2 M0.1
1.2 M0.1
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
B37872A1152K0**
B37872A1222K0**
B37872A1332K0**
B37872A1472K0**
B37872A1682K0**
B37872A1103K0**
B37872A1153K0**
B37872A1223K0**
B37872A1333K0**
B37872A1473K0**
B37872A1683K0**
B37872A1104K0**
6.8 nF
10. nF
15. nF
22. nF
33. nF
47. nF
68. nF
100. nF
2)
3)
3000
3000
12000
12000
2)
3)
1) Other capacitance values on request.
2) Blister tape, 180-mm reel, ordering code ** 62
3) Blister tape, 330-mm reel, ordering code ** 72
^
^
Please read Cautions and warnings and
Important notes at the end of this document.
19 10/06
Multilayer ceramic capacitors
Advanced series; C0G
Advanced
series
1)
Typical characteristics for C0G
Capacitance change ꢁC/C versus
Capacitance change ꢁC/C versus
25
0
temperature T (tolerance range
)
superimposed DC voltage V
KKE0458-8
KKE0107-F
0.5
%
1.0
%
∆
C
∆C
C25
C
0
0.3
0.2
0.6
0.4
0.2
0.1
0
0
_0.1
_0.2
_0.3
_0.4
_0.5
_0.2
_0.4
_0.6
_0.8
_1.0
_55 _40 20
0
20 40 60 80
C 120
T
_
0
40
80
120
160 V 200
V
˚
Impedance |Z| versus
frequency f
Dissipation factor tan ꢀ versus
temperature T
_2
KKE0118-V
KKE0124-5
105
10
Ω
1 pF
104
103
102
101
tan
δ
Z
10 pF
_3
_4
_5
10
100 pF
1 nF
10
10
100
_1
10
_2
100
10
_
_
_60 40 20 0 20 40 60 80 100 C 140
101
102
MHz 103
f
˚
T
1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance.
Please read Cautions and warnings and
Important notes at the end of this document.
20 10/06
Multilayer ceramic capacitors
Advanced series; C0G
Advanced
series
1)
Typical characteristics for C0G
Insulation resistance R versus
Capacitance change ꢁC/C versus
ins
1
temperature T
time t
KKE0100-S
KKE0129-B
108
5
M
Ω
%
∆C
C1
Rins
0
106
105
104
103
102
_5
_10
_15
_20
100
101
102
h 103
t
0
20
40
60
80 100
C 140
˚
T
1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance.
Please read Cautions and warnings and
Important notes at the end of this document.
21 10/06
Multilayer ceramic capacitors
Advanced series; X7R
Advanced
series
1)
Typical characteristics for X7R
Capacitance change ꢁC/C versus
Capacitance change ꢁC/C versus
25
25
temperature T for NME
temperature T for BME
KKE0417-6
KKE0409-F
15
15
%
%
∆C
C25
∆C
C25
5
5
0
_5
0
_5
_10
_15
_20
_25
_30
_35
_40
_10
_15
_20
_25
_30
_35
_40
_45
_50
_45
_50
_60 _40 _20 0 20 40 60 80 100120 C160
_60 40 _20 0 20 40 60 80 100120 C160
_
˚
˚
T
T
Capacitance change ꢁC/C versus
25
temperature T for HighCV
KKE0410-I
15
%
∆C
C25
5
0
_5
_10
_15
_20
_25
_30
_35
_40
_45
_50
_
_60 40 _20 0 20 40 60 80 100120 C160
˚
T
1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance.
Please read Cautions and warnings and
Important notes at the end of this document.
22 10/06
Multilayer ceramic capacitors
Advanced series; X7R
Advanced
series
1)
Typical characteristics for X7R
Capacitance change ꢁC/C versus
Capacitance change ꢁC/C versus
0
0
superimposed DC voltage V for NME
superimposed DC voltage V for BME
KKE0415-N
KKE0402-S
10
%
10
%
10 nF/100 V/size 1206
100 nF/50 V/size 0805
∆C
C0
∆C
C0
0
0
_10
_20
_30
_40
_50
_10
_20
_30
_40
_50
_60
_70
_60
_70
0
20
40
60
80 V 100
V
0
5 10 15 20 25 30 35 40 45 50 V
V
Capacitance change ꢁC/C versus
0
superimposed DC voltage V for HighCV
KKE0413-8
20
%
∆C
C0
0
_10
_20
_30
_40
_50
_60
_70
_80
_90
1 µF/25 V/size 0805
_100
0
5
10
15
20
25 V 30
V
1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance.
Please read Cautions and warnings and
Important notes at the end of this document.
23 10/06
Multilayer ceramic capacitors
Advanced series; X7R
Advanced
series
1)
Typical characteristics for X7R
Impedance |Z| versus
frequency f for NME
Impedance |Z| versus
frequency f for BME
KKE0416-X
KKE0405-G
101
102
Ω
Ω
10 nF/100 V/size 1206
Z , ESR
100 nF/50 V/size 0805
Z , ESR
100
100
_1
_2
_3
10
10
10
_1
10
_2
Z
10
10
ESR
Z
ESR
_3
100
100
101
102
103 MHz 104
f
101
102
103 MHz 104
f
Impedance |Z| versus
frequency f for HighCV
KKE0399-4
104
Ω
1 µF/25 V/size 0805
Z , ESR
102
101
100
_1
10
_2
_3
Z
10
10
ESR
_ 4
_ 3
_ 2
_1
10 10 10 10 100 101 102 MHz 104
f
1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance.
Please read Cautions and warnings and
Important notes at the end of this document.
24 10/06
Multilayer ceramic capacitors
Advanced series; X7R
Advanced
series
1)
Typical characteristics for X7R
Dissipation factor tan ꢀ versus
Dissipation factor tan ꢀ versus
temperature T for NME/BME
temperature T for HighCV
_1
_1
KKE0431-6
KKE0430-X
10
10
tan δ
tan δ
_2
_2
10
10
_3
_3
10
10
_60 _40 _20 0 20 40 60 80 100 120 C 160
_60 _40 _20 0 20 40 60 80 100 120 C 160
˚
˚
T
T
Insulation resistance R versus
Insulation resistance R versus
ins
ins
temperature T for NME/BME
temperature T for HighCV
KKE0429-U
KKE0428-L
104
108
M
Ω
M
Ω
Rins
Rins
1 µF/25 V/size 0805
103
102
101
100
106
105
104
103
102
0
20 40 60 80 100 120
C 160
0
20 40 60 80 100 120
C 160
˚
˚
T
T
1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance.
Please read Cautions and warnings and
Important notes at the end of this document.
25 10/06
Multilayer ceramic capacitors
Advanced series; X7R
Advanced
series
1)
Typical characteristics for X7R
Capacitance change ꢁC/C versus
Capacitance change ꢁC/C versus
1
1
time t for NME/BME
time t for HighCV
KKE0394-X
KKE0397-M
10
10
%
%
∆C
C1
∆C
C1
5
5
0
_5
0
_5
_10
_15
_20
_10
_15
_20
100
101
102
103
104 h 105
t
100
101
102
103
104 h 105
t
1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance.
Please read Cautions and warnings and
Important notes at the end of this document.
26 10/06
Multilayer ceramic capacitors
Cautions and warnings
Notes on the selection of ceramic capacitors
In the selection of ceramic capacitors, the following criteria must be considered:
1. Depending on the application, ceramic capacitors used to meet high quality requirements should
at least satisfy the specifications to AEC-Q200. They must meet quality requirements going
beyond this level in terms of ruggedness (e.g. mechanical, thermal or electrical) in the case of
critical circuit configurations and applications (e.g. in safety-relevant applications such as ABS
and airbag equipment or durable industrial goods).
2. At the connection to the battery or power supply (e.g. clamp 15 or 30 in the automobile) and at
positions with stranding potential, to reduce the probability of short circuits following a fracture,
two ceramic capacitors must be connected in series and/or a ceramic capacitor with integrated
series circuit should be used. The MLSC from EPCOS contains such a series circuit in a single
component.
3. Ceramic capacitors with the temperature characteristics Z5U and Y5V do not satisfy the require-
ments to AEC-Q200 and are mechanically and electrically less rugged than C0G or X7R/X8R
ceramic capacitors. In applications that must satisfy high quality requirements, therefore, these
capacitors should not be used as discrete components (see the chapter “Effects on mechanical,
thermal and electrical stress”, point 1.4).
4. For ESD protection, preference should be given to the use of multilayer varistors (MLV) (see the
chapter “Effects on mechanical, thermal and electrical stress”, point 1.4).
5. An application-specific derating or continuous operating voltage must be considered in order to
cushion (unexpected) additional stresses (see the chapter “Reliability”).
The following should be considered in circuit board design
1. If technically feasible in the application, preference should be given to components having an
optimal geometrical design.
2. At least FR4 circuit board material should be used.
3. Geometrically optimal circuit boards should be used, ideally those that cannot be deformed.
4. Ceramic capacitors must always be placed a sufficient minimum distance from the edge of the
circuit board. High bending forces may be exerted there when the panels are separated and dur-
ing further processing of the board (such as when incorporating it into a housing).
5. Ceramic capacitors should always be placed parallel to the possible bending axis of the circuit
board.
6. No screw connections should be used to fix the board or to connect several boards. Compo-
nents should not be placed near screw holes. If screw connections are unavoidable, they must
be cushioned (for instance by rubber pads).
27 10/06
Multilayer ceramic capacitors
Cautions and warnings
The following should be considered in the placement process
1. Ensure correct positioning of the ceramic capacitor on the solder pad.
2. Caution when using casting, injection-molded and molding compounds and cleaning agents,
as these may damage the capacitor.
3. Support the circuit board and reduce the placement forces.
4. A board should not be straightened (manually) if it has been distorted by soldering.
5. Separate panels with a peripheral saw, or better with a milling head (no dicing or breaking).
6. Caution in the subsequent placement of heavy or leaded components (e.g. transformers or
snap-in components): danger of bending and fracture.
7. When testing, transporting, packing or incorporating the board, avoid any deformation of the
board not to damage the components.
8. Avoid the use of excessive force when plugging a connector into a device soldered onto the
board.
9. Ceramic capacitors must be soldered only by the mode (reflow or wave soldering) permissible
for them (see the chapter “Soldering directions”).
10. When soldering the most gentle solder profile feasible should be selected (heating time, peak
temperature, cooling time) in order to avoid thermal stresses and damage.
11. Ensure the correct solder meniscus height and solder quantity.
12. Ensure correct dosing of the cement quantity.
13. Ceramic capacitors with an AgPd external termination are not suited for the lead-free solder
process: they were developed only for conductive adhesion technology.
This listing does not claim to be complete, but merely reflects the experience of EPCOS AG.
28 10/06
Multilayer ceramic capacitors
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As
a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic components
or failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of a passive electronic component could endanger human life or health
(e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of
suitable design of the customer application or other action taken by the customer (e.g.
installation of protective circuitry or redundancy) that no injury or damage is sustained by third
parties in the event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, EPCOS-JONES, Baoke, CeraDiode, CSSP, MLSC, PhaseCap,
PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap,
WindCap are trademarks registered or pending in Europe and in other countries. Further
information will be found on the Internet at www.epcos.com/trademarks.
29 10/06
相关型号:
B37872A1682K070
CAPACITOR, CERAMIC, MULTILAYER, 100V, X7R, 0.0068uF, SURFACE MOUNT, 1206, CHIP
EPCOS
©2020 ICPDF网 联系我们和版权申明