B32560-J155-J189 [EPCOS]
CAPACITOR, METALLIZED FILM, POLYESTER, 63V, 1.5uF, THROUGH HOLE MOUNT, AXIAL LEADED;
| 型号： | B32560-J155-J189 |
| 厂家： | 
EPCOS |
| 描述： | CAPACITOR, METALLIZED FILM, POLYESTER, 63V, 1.5uF, THROUGH HOLE MOUNT, AXIAL LEADED |
| 文件： | 总32页 (文件大小：570K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Film Capacitors
Metallized Polyester Film Capacitors (MKT)
Series/Type:
B32560 ... B32564
Date:
May 2009
© EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Metallized polyester film capacitors (MKT)
General purpose (stacked) SilverCapTM
B32560 ... B32564
Typical applications
SMPS, converter
Dimensional drawing
Electronic ballasts
Compact fluorescent lamps (CFL)
Ignition
Climatic
Max. operating temperature: 125 °C
Climatic category (IEC 60068-1): 55/125/56
Features
Dimensions in mm
Special dimensions available on request
High pulse strength
Small dimensions
Lead spacing Lead diameter Type
±0.4
d1
Construction
Dielectric: polyethylene terephthalate
(polyester, PET)
Stacked-film technology
Uncoated
7.5
0.5
0.5
0.6
0.8
0.8
0.8
B32560
B32561
B32562J
B32562H
B32563
B32564
10.0
15.0
22.5
27.5
Terminals
Parallel wire leads, lead-free tinned
Special lead lengths available on request
Marking
Rated capacitance (coded),
rated DC voltage
Delivery mode
Bulk (untaped)
Taped (Ammo pack or reel) for lead spacing ≤15.0 mm.
For notes on taping, refer to chapter "Taping and packing“.
Notes on mounting
When mounting these capacitors, take into account creepage distances and clearances to
adjacent live parts. The insulating strength of the cut surfaces to other live parts of the circuit is
1.5 times the capacitors rated DC voltage, but is always at least 300 V DC.
Capacitors with 7.5 mm lead spacing are only suitable for use with single-clad printed circuit
boards.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 32
B32560 ... B32564
General purpose (stacked) SilverCapTM
Overview of available types
Lead spacing 7.5 mm
10.0 mm
B32561
7
15.0 mm
Type
B32560
5
B32562
9
Page
VR (V DC)
63 100 250 400 630 1000 63 100 250 400 630 100 250 400 630
VRMS (V AC) 40 63 160 200 400 500 40 63 160 200 350 63 160 200 350
CR (µF)
0.0010
0.0015
0.0022
0.0033
0.0047
0.0068
0.010
0.015
0.022
0.033
0.047
0.068
0.10
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 32
B32560 ... B32564
General purpose (stacked) SilverCapTM
Overview of available types
Lead spacing 22.5 mm
27.5 mm
B32564
11
Type
B32563
10
Page
VR (V DC)
100
250
160
400
200
100
250
160
400
200
420
200
VRMS (V AC) 63
63
CR (µF)
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 32
B32560
General purpose (stacked) SilverCapTM
Ordering codes and packing units (lead spacing 7.5 mm)
VR
VRMS
f ≤60 Hz
CR
Max. dimensions Ordering code
Ammo
pack
pcs./MOQ MOQ
Reel
pcs./
Untaped
pcs./
MOQ
w × h × l
mm
(composition see
below)
V DC V AC
63 40
µF
1.0
1.5
2.2
3.3
4.0 × 6.8 × 9.0
5.1 × 7.6 × 9.0
6.5 × 8.2 × 9.0
8.5 × 9.1 × 9.0
9.8 × 11.0 × 9.0
2.5 × 5.1 × 9.0
2.7 × 5.7 × 9.0
3.4 × 6.1 × 9.0
4.2 × 6.5 × 9.0
5.5 × 7.0 × 9.0
6.7 × 8.2 × 9.0
8.5 × 9.2 × 9.0
9.5 × 11.0 × 9.0
B32560J0105+***
B32560J0155+***
B32560J0225+***
B32560J0335+000
B32560J0475+000
B32560J1224+***
B32560J1334+***
B32560J1474+***
B32560J1684+***
B32560J1105+***
B32560J1155+***
B32560J1225+000
B32560J1335+000
B32560J3473+***
B32560J3683+***
B32560J3104+***
B32560J3154+***
B32560J3224+***
B32560J3334+***
B32560J3474+000
B32560J3684+000
8800
6800
6000
7200
5600
4800
4000
2000
2000
1400
1000
7600
6000
4800
3600
2000
1600
1200
800
7600
6800
4800
3600
2600
1800
1200
800
ꢀ
ꢀ
4.7
ꢀ
ꢀ
100 63
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
12400
12000
9600
8000
6000
5000
ꢀ
10000
9600
8000
6400
4800
4000
ꢀ
ꢀ
ꢀ
250 160
0.047 2.5 × 5.2 × 9.0
0.068 2.6 × 5.7 × 9.0
13000
12400
12400
8200
6800
5200
ꢀ
10400
10000
8000
6800
5200
4400
ꢀ
0.10
0.15
0.22
0.33
0.47
0.68
3.2 × 6.1 × 9.0
3.9 × 7.0 × 9.0
4.9 × 7.5 × 9.0
6.4 × 8.2 × 9.0
7.4 × 9.8 × 9.0
9.5 × 11.0 × 9.0
ꢀ
ꢀ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Special dimensions available on request.
For corresponding design rules, refer to chapter "General technical information", page .
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
M = ±20%
K = ±10%
J = ±5%
289 = Ammo pack
189 = Reel
000 = Untaped (lead length 5 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 32
B32560
General purpose (stacked) SilverCapTM
Ordering codes and packing units (lead spacing 7.5 mm)
VR
VRMS
f ≤60 Hz
CR
Max. dimensions Ordering code
Ammo
pack
pcs./MOQ MOQ
Reel
pcs./
Untaped
pcs./
MOQ
w × h × l
mm
(composition see
below)
V DC V AC
400 200
µF
0.0010 2.5 × 5.5 × 9.0
0.0015 2.5 × 5.5 × 9.0
0.0022 2.5 × 5.5 × 9.0
0.0033 2.5 × 5.5 × 9.0
0.0047 2.5 × 5.5 × 9.0
0.0068 2.5 × 5.5 × 9.0
0.010 2.5 × 5.5 × 9.0
0.015 2.5 × 5.5 × 9.0
0.022 2.5 × 5.5 × 9.0
0.033 2.6 × 6.0 × 9.0
0.047 3.2 × 6.5 × 9.0
0.068 3.8 × 7.3 × 9.0
B32560J6102+***
B32560J6152+***
B32560J6222+***
B32560J6332+***
B32560J6472+***
B32560J6682+***
B32560J6103+***
B32560J6153+***
B32560J6223+***
B32560J6333+***
B32560J6473+***
B32560J6683+***
B32560J6104+***
B32560J6154+***
B32560J6224+000
B32560J8102+***
B32560J8152+***
B32560J8222+***
B32560J8332+***
B32560J8472+***
B32560J8682+***
B32560J8103+***
B32560J8153+000
B32560J8223+000
B32560J9222+***
B32560J9332+***
B32560J9472+***
14000
13000
13400
12400
13600
14000
12800
13000
12400
12400
10400
8600
11200
10400
10800
10000
10800
11200
10400
10400
10000
10000
8400
7200
5600
4000
ꢀ
9200
7200
7200
6800
7600
7600
7200
7200
6800
6400
4800
3600
2000
1800
1200
9200
7200
7200
7600
7200
5200
4000
2400
1600
6800
4800
3600
0.10
0.15
0.22
4.9 × 7.7 × 9.0
6.5 × 8.2 × 9.0
7.7 × 9.8 × 9.0
6800
5400
ꢀ
630 400
0.0010 2.5 × 5.5 × 9.0
0.0015 2.5 × 5.5 × 9.0
0.0022 2.5 × 5.5 × 9.0
0.0033 2.5 × 5.5 × 9.0
0.0047 2.5 × 5.5 × 9.0
0.0068 3.2 × 6.5 × 9.0
0.010 3.8 × 7.5 × 9.0
0.015 4.6 × 8.3 × 9.0
0.022 5.7 × 8.6 × 9.0
0.0022 2.5 × 6.0 × 9.0
0.0033 3.3 × 6.5 × 9.0
0.0047 3.6 × 7.4 × 9.0
14800
13000
13400
14000
13600
15000
9000
12000
2600
10800
11200
10800
9200
9200
ꢀ
ꢀ
ꢀ
ꢀ
1000 500
13000
10000
9000
10400
8000
7600
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Special dimensions available on request.
For corresponding design rules, refer to chapter "General technical information", page .
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
M = ±20%
K = ±10%
J = ±5%
289 = Ammo pack
189 = Reel
000 = Untaped (lead length 5 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 32
B32561
General purpose (stacked) SilverCapTM
Ordering codes and packing units (lead spacing 10 mm)
VR
VRMS
f ≤60 Hz
CR
Max. dimensions Ordering code
Ammo
pack
pcs./MOQ MOQ
Reel
pcs./
Untaped
pcs./
MOQ
w × h × l
(composition see
below)
V DC V AC
µF
mm
63
40
1.0
1.5
2.2
3.3
4.7
6.8
0.68
1.0
1.5
3.5 × 6.2 × 11.0 B32561J0105+***
4.3 × 6.9 × 11.0 B32561J0155+***
5.1 × 7.9 × 11.0 B32561J0225+***
6.4 × 9.1 × 11.0 B32561J0335+000
7.3 × 11.0 × 11.0 B32561J0475+000
8.8 × 12.7 × 11.0 B32561J0685+000
3.6 × 6.3 × 11.5 B32561J1684+***
4.5 × 6.9 × 11.5 B32561J1105+***
5.6 × 7.8 × 11.5 B32561J1155+***
6.9 × 9.0 × 11.5 B32561J1225+000
7.8 × 10.5 × 11.5 B32561J1335+000
2.8 × 5.3 × 11.5 B32561J3104+***
3.3 × 6.0 × 11.5 B32561J3154+***
4.2 × 6.6 × 11.5 B32561J3224+***
5.2 × 7.5 × 11.5 B32561J3334+***
6.3 × 8.5 × 11.5 B32561J3474+***
7.5 × 9.7 × 11.5 B32561J3684+000
9.5 × 11.0 × 11.5 B32561J3105+000
4960
4200
3400
ꢀ
7600
6000
5000
ꢀ
4000
2800
2000
1200
800
ꢀ
ꢀ
ꢀ
ꢀ
600
100
63
5040
4200
3240
ꢀ
8000
6000
4800
ꢀ
4000
2000
2000
1400
800
5200
4000
2800
2000
1400
800
2.2
3.3
ꢀ
ꢀ
250 160
0.10
0.15
0.22
0.33
0.47
0.68
1.0
6160
5040
4160
3360
2720
ꢀ
9200
8000
6000
5200
4400
ꢀ
ꢀ
ꢀ
600
400 200
0.033 2.5 × 5.1 × 11.5 B32561J6333+***
0.047 2.6 × 6.0 × 11.5 B32561J6473+***
0.068 3.2 × 6.6 × 11.5 B32561J6683+***
6480
6240
5560
4360
3400
2720
ꢀ
9200
9200
8400
6800
5200
4000
ꢀ
6000
5200
4000
2800
2000
1400
800
0.10
0.15
0.22
0.33
0.47
4.0 × 6.9 × 11.5 B32561J6104+***
5.2 × 7.7 × 11.5 B32561J6154+***
6.6 × 8.5 × 11.5 B32561J6224+***
8.0 × 9.5 × 11.5 B32561J6334+000
9.8 × 11.0 × 11.5 B32561J6474+000
ꢀ
ꢀ
600
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Special dimensions available on request.
For corresponding design rules, refer to chapter "General technical information", page .
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
M = ±20%
K = ±10%
J = ±5%
289 = Ammo pack
189 = Reel
000 = Untaped (lead length 5 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 32
B32561
General purpose (stacked) SilverCapTM
Ordering codes and packing units (lead spacing 10 mm)
VR
VRMS
f ≤60 Hz
CR
Max. dimensions Ordering code
Ammo
pack
pcs./MOQ MOQ
Reel
pcs./
Untaped
pcs./
MOQ
w × h × l
mm
(composition see
below)
V DC V AC
630 350
µF
0.015 2.8 × 6.3 × 11.0 B32561J8153+***
0.022 3.4 × 6.9 × 11.0 B32561J8223+***
0.033 4.2 × 7.6 × 11.0 B32561J8333+***
0.047 5.3 × 8.0 × 11.0 B32561J8473+***
0.068 6.3 × 9.0 × 11.0 B32561J8683+000
6320
5200
4080
3360
ꢀ
9200
8000
6400
5000
ꢀ
4800
3600
2400
1800
1400
800
0.10
0.15
7.3 × 11.4 × 11.0 B32561J8104+000
8.8 × 13.3 × 11.0 B32561J8154+000
ꢀ
ꢀ
ꢀ
ꢀ
600
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Special dimensions available on request.
For corresponding design rules, refer to chapter "General technical information", page .
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
M = ±20%
K = ±10%
J = ±5%
289 = Ammo pack
189 = Reel
000 = Untaped (lead length 5 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 32
B32562
General purpose (stacked) SilverCapTM
Ordering codes and packing units (lead spacing 15 mm)
VR
VRMS
f ≤60 Hz
CR
Max. dimensions Ordering code
Ammo
pack
pcs./MOQ MOQ
Reel
pcs./
Untaped
pcs./
MOQ
w × h × l
mm
(composition see
below)
V DC V AC
100 63
µF
2.2
4.9 × 8.0 × 16.5 B32562J1225+***
6.0 × 9.3 × 16.5 B32562J1335+***
7.3 × 10.6 × 16.5 B32562H1475+*** 3160
9.0 × 11.8 × 16.5 B32562H1685+*** 2560
11.8 × 13.0 × 16.5 B32562H1106+000
5.0 × 6.7 × 16.5 B32562J3474+***
6.0 × 7.8 × 16.5 B32562J3684+***
7.0 × 9.3 × 16.5 B32562J3105+***
4760
3840
5200
4000
3600
2800
ꢀ
3200
2000
1600
1160
800
3800
2000
2000
1200
800
3.3
4.7
6.8
10
ꢀ
250 160
400 200
630 350
0.47
0.68
1.0
1.5
2.2
4760
3840
3320
5200
4000
3600
2800
ꢀ
8.7 × 11.0 × 16.5 B32562H3155+*** 2640
10.7 × 12.8 × 16.5 B32562H3225+000
13.9 × 14.5 × 16.5 B32562H3335+000
4.7 × 7.5 × 16.5 B32562J6224+***
6.0 × 8.3 × 16.5 B32562J6334+***
7.3 × 9.3 × 16.5 B32562J6474+***
ꢀ
3.3
ꢀ
ꢀ
600
0.22
0.33
0.47
0.68
1.0
4960
3840
3160
5200
4000
3600
2800
ꢀ
3400
2000
1800
1200
800
8.9 × 10.8 × 16.5 B32562H6684+*** 2560
10.9 × 12.5 × 16.5 B32562H6105+000
13.7 × 15.2 × 16.5 B32562H6155+000
9.2 × 12.2 × 16.5 B32562H8224+000
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
1.5
0.22
ꢀ
400
ꢀ
ꢀ
1400
1000
720
0.33 11.2 × 14.2 × 16.5 B32562H8334+000
0.47 13.5 × 16.3 × 16.5 B32562H8474+000
ꢀ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Special dimensions available on request.
For corresponding design rules, refer to chapter "General technical information", page .
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
M = ±20%
K = ±10%
J = ±5%
289 = Ammo pack
189 = Reel
000 = Untaped (lead length 5 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 32
B32563
General purpose (stacked) SilverCapTM
Ordering codes and packing units (lead spacing 22.5 mm)
VR
VRMS
f ≤60 Hz
CR
Max. dimensions
w × h × l
mm
Ordering code
(composition see
below)
Untaped
V DC V AC
100 63
µF
pcs./MOQ
6.8
7.0 × 10.5 × 24.0 B32563J1685+000
8.6 × 12.2 × 24.0 B32563J1106+000
10.9 × 14.0 × 24.0 B32563J1156+000
12.8 × 17.2 × 24.0 B32563J1226+000
8.3 × 11.2 × 24.0 B32563J3225+000
10.1 × 13.5 × 24.0 B32563J3335+000
12.2 × 15.5 × 24.0 B32563J3475+000
8.3 × 11.2 × 24.0 B32563J6105+000
10.3 × 13.2 × 24.0 B32563J6155+000
12.6 × 15.5 × 24.0 B32563J6225+000
3680
3840
2480
1440
2960
2800
1560
3400
2640
1440
10
15
22
250 160
400 200
2.2
3.3
4.7
1.0
1.5
2.2
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Special dimensions available on request.
For corresponding design rules, refer to chapter "General technical information", page .
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Packaging code:
000 = Untaped (lead length 5 ꢀ 1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 32
B32564
General purpose (stacked) SilverCapTM
Ordering codes and packing units (lead spacing 27.5 mm)
VR
VRMS
f ≤60 Hz
CR
Max. dimensions
w × h × l
mm
Ordering code
(composition see
below)
Untaped
V DC V AC
100 63
µF
pcs./MOQ
10
15
22
33
3.3
4.7
6.8
7.6 × 11.0 × 29.0 B32564J1106+000
9.1 × 13.5 × 29.0 B32564J1156+000
11.0 × 16.0 × 29.0 B32564J1226+000
13.0 × 19.8 × 29.0 B32564J1336+000
7.9 × 14.0 × 29.0 B32564J3335+000
9.6 × 15.8 × 29.0 B32564J3475+000
11.9 × 18.0 × 29.0 B32564J3685+000
13.8 × 22.5 × 29.0 B32564J3106+000
7.8 × 14.2 × 29.0 B32564J6155+000
9.6 × 16.4 × 29.0 B32564J6225+000
12.2 × 18.8 × 29.0 B32564J6335+000
14.2 × 22.8 × 29.0 B32564J6475+000
2720
1720
1280
1440
3000
1600
1200
1120
3000
1600
1320
1040
250 160
400 200
420 200
10
1.5
2.2
3.3
4.7
4.7
6.8
16.0 × 20.0 × 29.0 B32564T6475K000 1160
16.0 × 20.0 × 29.0 B32564T6685K000 1160
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Special dimensions available on request.
For corresponding design rules, refer to chapter "General technical information", page .
The technical data given on the next pages do not apply to 420 V series. Please contact your
nearest EPCOS representative if you need further information.
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Packaging code:
000 = Untaped (lead length 5 ꢀ 1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 32
B32560 ... B32564
General purpose (stacked) SilverCapTM
Technical data
Operating temperature range Max. operating temperature Top,max
Upper category temperature Tmax
125 °C
+125 °C
ꢀ55 °C
+85 °C
Lower category temperature Tmin
Rated temperature TR
Dissipation factor tan δ (in 10-3) at
CR ≤ 0.1 µF 0.1 µF < CR ≤ 1 µF CR > 1 µF
at 20 °C
1 kHz
8
8
10
ꢀ
(upper limit values)
10 kHz 15
15
ꢀ
100 kHz 30
ꢀ
Insulation resistance Rins
or time constant τ = CR ꢁ Rins
at 20 °C, rel. humidity ≤ 65%
(minimum as-delivered values)
DC test voltage
VR
CR ≤ 0.33 µF
CR > 0.33 µF
1250 s
2500 s
≤ 100 V DC 3750 MΩ
≥ 250 V DC 7500 MΩ
1.4 ꢁ VR, 2 s
Category voltage VC
TA (°C)
DC voltage derating
VC = VR
AC voltage derating
VC,RMS = VRMS
(continuous operation with VDC TA ≤ 85
or VAC at f ≤ 60 Hz)
Operating voltage Vop for
short operating periods
(VDC or VAC at f ≤ 60 Hz)
Damp heat test
85<TA≤125 VC = VR ꢁ (165ꢀTA)/80 VC,RMS=VRMS ꢁ (165ꢀTA)/80
TA (°C)
DC voltage (max. hours) AC voltage (max. hours)
TA ≤ 100
Vop = 1.25 ꢁ VC (2000 h) Vop = 1.0 ꢁ VC,RMS (2000 h)
100<TA≤125 Vop = 1.25 ꢁ VC (1000 h) Vop = 1.0 ꢁ VC,RMS (1000 h)
56 days1)/40 °C/93% relative humidity
Limit values after damp
heat test
Capacitance change ꢂ∆C/Cꢂ
≤ 5%
Dissipation factor change ∆ tan δ
≤ 3 ꢁ 10-3 (at 1 kHz)
≤ 5 ꢁ 10-3 (at 10 kHz)
≥ 50% of minimum
as-delivered values
Insulation resistance Rins
or time constant τ = CR ꢁ Rins
Reliability:
Failure rate λ
Service life tSL
1 fit (≤ 1 ꢁ 10-9 /h) at 0.5 ꢁ VR, 40 °C
200 000 h at 1.0 ꢁ VR, 85 °C
For conversion to other operating conditions and temperatures,
refer to chapter "Quality, 2 Reliability".
Failure criteria:
Total failure
Short circuit or open circuit
Failure due to variation
of parameters
Capacitance change ꢂ∆C/Cꢂ
Dissipation factor tan δ
> 10%
> 2 ꢁ upper limit value
< 150 MΩ (CR ≤ 0.33 µF)
Insulation resistance Rins
or time constant τ = CR ꢁ Rins
< 50 s
(CR > 0.33 µF)
1) Test criteria must be met after exposure to damp heat for 21 days
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 32
B32560 ... B32564
General purpose (stacked) SilverCapTM
Pulse handling capability
"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal
voltages, expressed in V/µs.
"k0" represents the maximum permissible pulse characteristic of the waveform applied to the
capacitor, expressed in V2/µs.
Note:
The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the
capacitor.
dV/dt values
Lead spacing 7.5 mm
VR VRMS
V DC V AC dV/dt in V/µs
10 mm
15 mm
22.5 mm
27.5 mm
63
100
250
400
420
630
630
1000
40
63
120
150
200
275
ꢀ
60
75
ꢀ
ꢀ
ꢀ
50
100
125
ꢀ
50
100
125
ꢀ
25
50
60
60
ꢀ
160
200
200
350
400
500
150
175
ꢀ
ꢀ
320
ꢀ
150
ꢀ
ꢀ
320
360
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
k0 values
Lead spacing 7.5 mm
VR VRMS
V DC V AC k0 in V2/µs
10 mm
15 mm
22.5 mm
27.5 mm
63
100
250
400
420
630
630
1000
40
63
15 000
30 000
100 000
220 000
ꢀ
7500
ꢀ
ꢀ
10 000
50 000
100 000
ꢀ
ꢀ
5 000
25 000
50 000
50 000
ꢀ
15 000
75 000
140 000
ꢀ
10 000
50 000
100 000
ꢀ
160
200
200
350
400
500
ꢀ
400 000
ꢀ
190 000
ꢀ
ꢀ
400 000
720 000
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 32
B32560 ... B32564
General purpose (stacked) SilverCapTM
Impedance Z versus frequency f
(typical values)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 32
B32560
General purpose (stacked) SilverCapTM
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 7.5 mm
63 V DC/40 V AC
100 V DC/63 V AC
250 V DC/160 V AC
400 V DC/200 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 32
B32560
General purpose (stacked) SilverCapTM
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 7.5 mm
630 V DC/400 V AC
1000 V DC/500 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 32
B32561
General purpose (stacked) SilverCapTM
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 10 mm
63 V DC/40 V AC
100 V DC/63 V AC
250 V DC/160 V AC
400 V DC/200 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 17 of 32
B32561
General purpose (stacked) SilverCapTM
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 10 mm
630 V DC/350 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 18 of 32
B32562
General purpose (stacked) SilverCapTM
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 15 mm
100 V DC/63 V AC
250 V DC/160 V AC
400 V DC/200 V AC
630 V DC/350 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 19 of 32
B32563
General purpose (stacked) SilverCapTM
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 22.5 mm
100 V DC/63 V AC
250 V DC/160 V AC
400 V DC/200 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 20 of 32
B32564
General purpose (stacked) SilverCapTM
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 27.5 mm
100 V DC/63 V AC
250 V DC/160 V AC
400 V DC/200 V AC
420 V DC/200 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 21 of 32
B32560 ... B32564
General purpose (stacked) SilverCapTM
Mounting guidelines
1
Soldering
Solderability of leads
1.1
The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1.
Before a solderability test is carried out, terminals are subjected to accelerated ageing (to
IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far
higher than the upper category temperature of the capacitors, the terminal wires should be cut off
from the capacitor before the ageing procedure to prevent the solderability being impaired by the
products of any capacitor decomposition that might occur.
Solder bath temperature
Soldering time
235 ±5 °C
2.0 ±0.5 s
Immersion depth
Evaluation criteria:
Visual inspection
2.0 +0/ꢀ0.5 mm from capacitor body or seating plane
Wetting of wire surface by new solder ≥90%, free-flowing solder
1.2
Resistance to soldering heat
Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A.
Conditions:
Series
Solder bath temperature Soldering time
MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C
coated
10 ±1 s
uncoated (lead spacing > 10 mm)
MFP
MKP (lead spacing > 7.5 mm)
MKT boxed (case 2.5 × 6.5 × 7.2 mm)
5 ±1 s
(lead spacing ≤ 7.5 mm)
uncoated (lead spacing ≤ 10 mm)
insulated (B32559)
MKP
MKT
< 4 s
recommended soldering
profile for MKT uncoated
(lead spacing ≤ 10 mm) and
insulated (B32559)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 22 of 32
B32560 ... B32564
General purpose (stacked) SilverCapTM
Immersion depth
Shield
2.0 +0/ꢀ0.5 mm from capacitor body or seating plane
Heat-absorbing board, (1.5 ±0.5) mm thick, between capacitor
body and liquid solder
Evaluation criteria:
Visual inspection
No visible damage
2% for MKT/MKP/MFP
5% for EMI suppression capacitors
As specified in sectional specification
∆C/C0
tan δ
Please read Cautions and warnings and
Important notes at the end of this document.
Page 23 of 32
B32560 ... B32564
General purpose (stacked) SilverCapTM
1.3
General notes on soldering
Permissible heat exposure loads on film capacitors are primarily characterized by the upper cate-
gory temperature Tmax. Long exposure to temperatures above this type-related temperature limit
can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical
characteristics. For short exposures (as in practical soldering processes) the heat load (and thus
the possible effects on a capacitor) will also depend on other factors like:
Pre-heating temperature and time
Forced cooling immediately after soldering
Terminal characteristics:
diameter, length, thermal resistance, special configurations (e.g. crimping)
Height of capacitor above solder bath
Shadowing by neighboring components
Additional heating due to heat dissipation by neighboring components
Use of solder-resist coatings
The overheating associated with some of these factors can usually be reduced by suitable coun-
termeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced
cooling process may possibly have to be included.
EPCOS recommends the following conditions:
Pre-heating with a maximum temperature of 110 °C
Temperature inside the capacitor should not exceed the following limits:
ꢀ MKP/MFP 110 °C
ꢀ MKT 160 °C
When SMD components are used together with leaded ones, the leaded film capacitors should
not pass into the SMD adhesive curing oven. The leaded components should be assembled af-
ter the SMD curing step.
Leaded film capacitors are not suitable for reflow soldering.
Uncoated capacitors
For uncoated MKT capacitors with lead spacings ≤10 mm (B32560/B32561) the following mea-
sures are recommended:
pre-heating to not more than 110 °C in the preheater phase
rapid cooling after soldering
Please read Cautions and warnings and
Important notes at the end of this document.
Page 24 of 32
B32560 ... B32564
General purpose (stacked) SilverCapTM
2
Cleaning
To determine whether the following solvents, often used to remove flux residues and other sub-
stances, are suitable for the capacitors described, refer to the table below:
Type
Ethanol,
isopropanol,
n-propanol
n-propanol-water
mixtures,
water with surface
tension-reducing
tensides (neutral)
Solvent from
table A (see
next page)
Solvent from
table B (see
next page)
MKT
(uncoated)
Suitable
Unsuitable
In part suitable Unsuitable
Suitable
MKT, MKP, MFP
(coated/boxed)
Suitable
Even when suitable solvents are used, a reversible change of the electrical characteristics may
occur in uncoated capacitors immediately after they are washed. Thus it is always recommended
to dry the components (e.g. 4 h at 70 °C) before they are subjected to subsequent electrical test-
ing.
Table A
Manufacturers' designations for trifluoro-trichloro-ethane-based cleaning solvents (selection)
Trifluoro-trichloro-
ethane
Mixtures of trifluoro-trichloro-ethane with ethanol and
isopropanol
Manufacturer
Freon TF
Freon TE 35; Freon TP 35; Freon TES
Frigen 113 TR-E; Frigen 113 TR-P; Frigen TR-E 35
Arklone A; Arklone L; Arklone K
Du Pont
Hoechst
ICI
Frigen 113 TR
Arklone P
Kaltron 113 MDR
Flugene 113
Kaltron 113 MDA; Kaltron 113 MDI; Kaltron 113 MDI 35 Kali-Chemie
Flugene 113 E; Flugene 113 IPA Rhone-Progil
Table B (worldwide banned substances)
Manufacturers' designations for unsuitable cleaning solvents (selection)
Mixtures of chlorinated hydrocarbons and ketones with fluorated hydrocarbons Manufacturer
Freon TMC; Freon TA; Freon TC
Arklone E
Du Pont
ICI
Kaltron 113 MDD; Kaltron 113 MDK
Flugene 113 CM
Kali-Chemie
Rhone-Progil
Please read Cautions and warnings and
Important notes at the end of this document.
Page 25 of 32
B32560 ... B32564
General purpose (stacked) SilverCapTM
3
Embedding of capacitors in finished assemblies
In many applications, finished circuit assemblies are embedded in plastic resins. In this case,
both chemical and thermal influences of the embedding ("potting") and curing processes must be
taken into account.
Our experience has shown that the following potting materials can be recommended: non-flexible
epoxy resins with acid-anhydride hardeners; chemically inert, non-conducting fillers; maximum
curing temperature of 100 °C.
Caution:
Consult us first if you wish to embed uncoated types!
Please read Cautions and warnings and
Important notes at the end of this document.
Page 26 of 32
B32560 ... B32564
General purpose (stacked) SilverCapTM
Cautions and warnings
Do not exceed the upper category temperature (UCT).
Do not apply any mechanical stress to the capacitor terminals.
Avoid any compressive, tensile or flexural stress.
Do not move the capacitor after it has been soldered to the PC board.
Do not pick up the PC board by the soldered capacitor.
Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified
lead spacing.
Do not exceed the specified time or temperature limits during soldering.
Avoid external energy inputs, such as fire or electricity.
Avoid overload of the capacitors.
The table below summarizes the safety instructions that must always be observed. A detailed de-
scription can be found in the relevant sections of the chapters "General technical information" and
"Mounting guidelines".
Topic
Safety information
Reference chapter
"General technical
information"
Storage conditions Make sure that capacitors are stored within the
4.5
specified range of time, temperature and humidity "Storage conditions"
conditions.
Flammability
Avoid external energy, such as fire or electricity
(passive flammability), avoid overload of the
capacitors (active flammability) and consider the
flammability of materials.
5.3
"Flammability"
Resistance to
vibration
Do not exceed the tested ability to withstand
vibration. The capacitors are tested to
IEC 60068-2-6.
5.2
"Resistance to vibration"
EPCOS offers film capacitors specially designed
for operation under more severe vibration regimes
such as those found in automotive applications.
Consult our catalog "Film Capacitors for
Automotive Electronics".
Please read Cautions and warnings and
Important notes at the end of this document.
Page 27 of 32
B32560 ... B32564
General purpose (stacked) SilverCapTM
Topic
Safety information
Reference chapter
"Mounting guidelines"
Soldering
Cleaning
Do not exceed the specified time or temperature 1 "Soldering"
limits during soldering.
Use only suitable solvents for cleaning capacitors. 2 "Cleaning"
Embedding of
capacitors in
When embedding finished circuit assemblies in
plastic resins, chemical and thermal influences
3 "Embedding of
capacitors in finished
assemblies"
finished assemblies must be taken into account.
Caution: Consult us first, if you also wish to
embed other uncoated component types!
Please read Cautions and warnings and
Important notes at the end of this document.
Page 28 of 32
B32560 ... B32564
General purpose (stacked) SilverCapTM
Symbols and terms
Symbol
α
English
German
Heat transfer coefficient
Wärmeübergangszahl
αC
Temperature coefficient of capacitance Temperaturkoeffizient der Kapazität
A
Capacitor surface area
Kondensatoroberfläche
Feuchtekoeffizient der Kapazität
Kapazität
βC
Humidity coefficient of capacitance
Capacitance
C
CR
Rated capacitance
Nennkapazität
∆C
∆C/C
Absolute capacitance change
Relative capacitance change (relative
deviation of actual value)
Absolute Kapazitätsänderung
Relative Kapazitätsänderung (relative
Abweichung vom Ist-Wert)
∆C/CR
Capacitance tolerance (relative deviation Kapazitätstoleranz (relative Abweichung
from rated capacitance)
Time differential
vom Nennwert)
dt
Differentielle Zeit
∆t
Time interval
Zeitintervall
∆T
Absolute temperature change
(self-heating)
Absolute Temperaturänderung
(Selbsterwärmung)
∆tan δ
∆V
Absolute change of dissipation factor
Absolute voltage change
Absolute Änderung des Verlustfaktors
Absolute Spannungsänderung
dV/dt
Time differential of voltage function (rate Differentielle Spannungsänderung
of voltage rise)
(Spannungsflankensteilheit)
Spannungsänderung pro Zeitintervall
Aktivierungsenergie zur Diffusion
Eigeninduktivität
∆V/∆t
E
Voltage change per time interval
Activation energy for diffusion
Self-inductance
ESL
ESR
f
Equivalent series resistance
Frequency
Ersatz-Serienwiderstand
Frequenz
f1
Frequency limit for reducing permissible Grenzfrequenz für thermisch bedingte
AC voltage due to thermal limits
Reduzierung der zulässigen
Wechselspannung
f2
Frequency limit for reducing permissible Grenzfrequenz für strombedingte
AC voltage due to current limit
Reduzierung der zulässigen
Wechselspannung
fr
Resonant frequency
Resonanzfrequenz
FD
Thermal acceleration factor for diffusion Therm. Beschleunigungsfaktor zur
Diffusion
FT
i
Derating factor
Deratingfaktor
Current (peak)
Stromspitze
IC
Category current (max. continuous
current)
Kategoriestrom (max. Dauerstrom)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 29 of 32
B32560 ... B32564
General purpose (stacked) SilverCapTM
Symbol
IRMS
English
German
(Sinusoidal) alternating current,
root-mean-square value
Capacitance drift
(Sinusförmiger) Wechselstrom
iz
Inkonstanz der Kapazität
Impulskennwert
k0
LS
λ
Pulse characteristic
Series inductance
Serieninduktivität
Failure rate
Ausfallrate
λ0
Constant failure rate during useful
service life
Konstante Ausfallrate in der
Nutzungsphase
λtest
Pdiss
Pgen
Q
Failure rate, determined by tests
Dissipated power
Experimentell ermittelte Ausfallrate
Abgegebene Verlustleistung
Erzeugte Verlustleistung
Wärmeenergie
Generated power
Heat energy
ρ
Density of water vapor in air
Universal molar constant for gases
Ohmic resistance of discharge circuit
Dichte von Wasserdampf in Luft
Allg. Molarkonstante für Gas
Ohmscher Widerstand des
Entladekreises
R
R
Ri
Internal resistance
Insulation resistance
Parallel resistance
Series resistance
severity (humidity test)
Time
Innenwiderstand
Rins
RP
RS
S
Isolationswiderstand
Parallelwiderstand
Serienwiderstand
Schärfegrad (Feuchtetest)
Zeit
t
T
Temperature
Temperatur
τ
Time constant
Zeitkonstante
tan δ
tan δD
Dissipation factor
Dielectric component of dissipation
factor
Verlustfaktor
Dielektrischer Anteil des Verlustfaktors
tan δP
tan δS
TA
Parallel component of dissipation factor Parallelanteil des Verlfustfaktors
Series component of dissipation factor
Ambient temperature
Serienanteil des Verlustfaktors
Umgebungstemperatur
Tmax
Tmin
Upper category temperature
Lower category temperature
Obere Kategorietemperatur
Untere Kategorietemperatur
tOL
Operating life at operating temperature Betriebszeit bei Betriebstemperatur und
and voltage
-spannung
Top
TR
Operating temperature
Rated temperature
Reference temperature
Reference service life
AC voltage
Beriebstemperatur
Nenntemperatur
Referenztemperatur
Referenz-Lebensdauer
Wechselspannung
Tref
tSL
VAC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 30 of 32
B32560 ... B32564
General purpose (stacked) SilverCapTM
Symbol
VC
English
German
Category voltage
Category AC voltage
Kategoriespannung
(Sinusförmige)
VC,RMS
Kategorie-Wechselspannung
VCD
Vch
VDC
VFB
Vi
Corona-discharge onset voltage
Charging voltage
Teilentlade-Einsatzspannung
Ladespannung
DC voltage
Gleichspannung
Fly-back capacitor voltage
Input voltage
Spannung (Flyback)
Eingangsspannung
Vo
Output voltage
Ausgangssspannung
Betriebsspannung
Vop
Vp
Operating voltage
Peak pulse voltage
Peak-to-peak voltage Impedance
Rated voltage
Impuls-Spitzenspannung
Spannungshub
Vpp
VR
Nennspannung
Amplitude of rated AC voltage
Amplitude der Nenn-Wechselspannung
(Sinusförmige) Wechselspannung
R
VRMS
(Sinusoidal) alternating voltage,
root-mean-square value
S-correction voltage
VSC
Vsn
Spannung bei Anwendung "S-correction"
Spannung bei Anwendung
"Beschaltung"
Snubber capacitor voltage
Z
Impedance
Scheinwiderstand
Lead spacing
Rastermaß
Please read Cautions and warnings and
Important notes at the end of this document.
Page 31 of 32
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Ma-
terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-
tailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the fore-
going for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the "General Terms of Delivery for Products and Services in the Electrical In-
dustry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP,
MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT,
SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse,
WindCap are trademarks registered or pending in Europe and in other countries. Further
information will be found on the Internet at www.epcos.com/trademarks.
Page 32 of 32
相关型号：
B32560-J155-K189
Film Capacitor, Polyester, 63V, 10% +Tol, 10% -Tol, 1.5uF, Through Hole Mount, AXIAL LEADED
EPCOS
B32560-J1684-K
CAPACITOR, METALLIZED FILM, POLYESTER, 100V, 0.68uF, THROUGH HOLE MOUNT, AXIAL LEADED
EPCOS
B32560-J1684-K289
CAPACITOR, METALLIZED FILM, POLYESTER, 100 V, 0.68 uF, THROUGH HOLE MOUNT, AXIAL LEADED
EPCOS
B32560-J1684-M189
CAPACITOR, METALLIZED FILM, POLYESTER, 100 V, 0.68 uF, THROUGH HOLE MOUNT, AXIAL LEADED
EPCOS
B32560-J1684-M289
CAPACITOR, METALLIZED FILM, POLYESTER, 100 V, 0.68 uF, THROUGH HOLE MOUNT, AXIAL LEADED
EPCOS
©2020 ICPDF网 联系我们和版权申明