B32231D1225J000_技术文档

Film Capacitors

Metallized Polyester Film Capacitors (MKT)

Series/Type:

B32231

Date:

May 2009

The following products presented in this data sheet are being withdrawn.

Ordering Code

Substitute Product

Date of

Withdrawal

Deadline Last

Orders

Last Shipments

B32231D1334K000

B32231D1334J000

B32231D1154K000

2012-08-24

2012-11-30

2013-02-28

information contained therein without EPCOS' prior express consent is prohibited.

Ordering Code

Substitute Product

Date of

Withdrawal

Deadline Last

Orders

Last Shipments

B32231D1154J000

B32231D3155K000

B32231D3155J000

B32231D3154K000

B32231D3154J000

B32231D3105K000

B32231D3105J000

B32231D3104K000

B32231D3104J000

B32231D1684K000

B32231D1684J000

B32231D1474K000

B32231D1474J000

B32231D1225K000

B32231D1225J000

B32231D1224K000

B32231D1224J000

B32231D1155K000

B32231D1155J000

B32231D1105K000

B32231D1105J000

B32231D8474K000

B32231D8474J000

B32231D8334K000

B32231D8334J000

B32231D8224K000

B32231D8224J000

B32231D8154K000

B32231D8154J000

B32231D8104K000

B32231D8104J000

B32231D6684K000

B32231D6684J000

B32231D6474K000

B32231D6474J000

B32231D6334K000

B32231D6334J000

B32231D6224K000

2012-08-24

2012-11-30

2013-02-28

Ordering Code

Substitute Product

Date of

Withdrawal

Deadline Last

Orders

Last Shipments

B32231D6224J000

B32231D6154K000

B32231D6154J000

B32231D6104K000

B32231D6104J000

B32231D3684K000

B32231D3684J000

B32231D3474K000

B32231D3474J000

B32231D3334K000

B32231D3334J000

B32231D3225K000

B32231D3225J000

B32231D3224K000

B32231D3224J000

2012-08-24

2012-11-30

2013-02-28

For further information please contact your nearest EPCOS sales office, which will also support

you in selecting a suitable substitute. The addresses of our worldwide sales network are

presented at www.epcos.com/sales.

Metallized polyester film capacitors (MKT)

General purpose (wound)

B32231

Typical applications

Smoothing

Dimensional drawing

Filtering

Climatic

Max. operating temperature: 100 °C

Climatic category (IEC 60068-1): 40/100/21

Construction

Dimensions in mm

Dielectric: polyethylene terephthalate

(polyester, PET)

Flat winding

Insulating sleeve

Width w_max

≤6.0

>6.0 ... 13.0

0.8

Lead diameter d₁0.6

Face ends sealed with epoxy resin

When bending leads take care to leave a

clearance of 1 mm to the capacitor body.

Terminals

Central axial wire leads, lead-free tinned

Marking

Manufacturer, series number,

rated capacitance (coded),

capacitance tolerance (code letter),

rated DC voltage, date of manufacture (coded)

Delivery mode

Bulk (untaped)

Please read Cautions and warnings and

Important notes at the end of this document.

Page 2 of 19

B32231

General purpose (wound)

Overview of available types

Type

B32231

100

V_R(V DC)

250

160

400

200

630

200

V_RMS(V AC) 63

C_R(µF)

0.10

0.15

0.22

0.33

0.47

0.68

1.0

1.5

2.2

3.3

4.7

6.8

10

Please read Cautions and warnings and

Important notes at the end of this document.

Page 3 of 19

B32231

General purpose (wound)

Ordering codes and packing units

V_R

V_RMS

f ≤60 Hz

C_R

Max. dimensions

w × h × l

mm

Ordering code

(composition see

below)

Untaped

V DC V AC

100 63

µF

pcs./MOQ

0.15

5.5 × 8.5 × 14.0 B32231D1154+000 6000

5.5 × 8.5 × 14.0 B32231D1224+000 6000

5.5 × 8.5 × 14.0 B32231D1334+000 6000

5.5 × 9.0 × 19.0 B32231D1474+000 6000

5.5 × 9.0 × 19.0 B32231D1684+000 6000

7.0 × 12.0 × 19.0 B32231D1105+000 4000

8.0 × 13.0 × 19.0 B32231D1155+000 4000

8.0 × 13.0 × 27.0 B32231D1225+000 4000

8.0 × 15.0 × 27.0 B32231D1335+000 4000

10.0 × 18.0 × 32.0 B32231D1475+000 2000

10.0 × 20.0 × 32.0 B32231D1685+000 2000

13.0 × 23.0 × 32.0 B32231D1106+000 1000

5.5 × 8.5 × 14.0 B32231D3104+000 6000

5.5 × 8.5 × 14.0 B32231D3154+000 6000

5.5 × 9.0 × 19.0 B32231D3224+000 6000

5.5 × 9.0 × 19.0 B32231D3334+000 6000

6.0 × 12.0 × 19.0 B32231D3474+000 4000

7.5 × 12.0 × 19.0 B32231D3684+000 4000

7.5 × 12.0 × 27.0 B32231D3105+000 4000

8.5 × 14.0 × 27.0 B32231D3155+000 4000

8.5 × 16.0 × 27.0 B32231D3225+000 2000

10.0 × 18.0 × 32.0 B32231D3335+000 2000

13.0 × 20.0 × 32.0 B32231D3475+000 1000

0.22

0.33

0.47

0.68

1.0

1.5

2.2

3.3

4.7

6.8

10

250 160

0.10

0.15

0.22

0.33

0.47

0.68

1.0

1.5

2.2

3.3

4.7

MOQ = Minimum Order Quantity, consisting of 4 packing units.

Further E series and intermediate capacitance values on request.

Composition of ordering code

+ = Capacitance tolerance code:

K = ±10%

J = ±5% (on request)

Please read Cautions and warnings and

Important notes at the end of this document.

Page 4 of 19

B32231

General purpose (wound)

Ordering codes and packing units

V_R

V_RMS

f ≤60 Hz

C_R

Max. dimensions

w × h × l

mm

Ordering code

(composition see

below)

Untaped

V DC V AC

400 200

µF

pcs./MOQ

0.10

5.5 × 8.5 × 19.0 B32231D6104+000 6000

5.5 × 9.0 × 19.0 B32231D6154+000 6000

7.0 × 12.0 × 19.0 B32231D6224+000 4000

7.0 × 12.0 × 19.0 B32231D6334+000 4000

7.0 × 12.0 × 27.0 B32231D6474+000 4000

8.0 × 14.0 × 27.0 B32231D6684+000 4000

9.0 × 16.0 × 27.0 B32231D6105+000 2000

10.0 × 18.0 × 32.0 B32231D6155+000 1000

13.0 × 22.0 × 32.0 B32231D6225+000 1000

6.0 × 11.0 × 19.0 B32231D8104+000 4000

7.5 × 12.0 × 19.0 B32231D8154+000 4000

8.0 × 13.0 × 19.0 B32231D8224+000 4000

8.0 × 13.0 × 27.0 B32231D8334+000 4000

8.0 × 14.0 × 27.0 B32231D8474+000 2000

10.0 × 16.0 × 32.0 B32231D8684+000 2000

13.0 × 18.0 × 32.0 B32231D8105+000 1000

0.15

0.22

0.33

0.47

0.68

1.0

1.5

2.2

630 200

0.10

0.15

0.22

0.33

0.47

0.68

1.0

MOQ = Minimum Order Quantity, consisting of 4 packing units.

Further E series and intermediate capacitance values on request.

Composition of ordering code

+ = Capacitance tolerance code:

K = ±10%

J = ±5% (on request)

Please read Cautions and warnings and

Important notes at the end of this document.

Page 5 of 19

B32231

General purpose (wound)

Technical data

Operating temperature range Max. operating temperature T_op,max

Upper category temperature T_max

+100 °C

ꢀ40 °C

+85 °C

C_R> 1 µF

10

Lower category temperature T_min

Rated temperature T_R

Dissipation factor tan δ (in 10^-3) at

at 20 °C

0.10 µF < C_R≤ 1 µF

1 kHz 10

10 kHz 25

C_R≤ 0.33 µF

100 V DC 3750 MΩ

(upper limit values)

ꢀ

Insulation resistance R_ins

V_R

C_R> 0.33 µF

1250 s

2500 s

or time constant τ = C_Rꢁ R_ins

at 20 °C, rel. humidity ≤ 65% ≥ 250 V DC 7500 MΩ

(minimum as-delivered values)

DC test voltage

1.4 ꢁ V_R, 2 s

T_A(°C)

Category voltage V_C

DC voltage derating

V_C= V_R

AC voltage derating

V_C,RMS= V_RMS

(continuous operation with V_DCT_A≤ 85

or V_ACat f ≤ 60 Hz)

85<T_A≤100 V_C= V_Rꢁ (165ꢀT_A)/80

V_C,RMS=V_RMSꢁ (165ꢀT_A)/80

Operating voltage V_opfor

T_A(°C)

DC voltage (max. hours) AC voltage (max. hours)

short operating periods

T_A≤ 100

V_op= 1.25 ꢁ V_C(2000 h) V_op= 1.0 ꢁ V_C,RMS(1000 h)

(V_DCor V_ACat f ≤ 60 Hz)

Damp heat test

Limit values after damp

heat test

21 days/40 °C/93% relative humidity

Capacitance change ꢂ∆C/Cꢂ

≤ 5%

Dissipation factor change ∆ tan δ

≤ 5 ꢁ 10^-3(at 1 kHz)

≤ 7 ꢁ 10^-3(at 10 kHz)

≥ 20% of minimum

as-delivered values

Insulation resistance R_ins

or time constant τ = C_Rꢁ R_ins

Please read Cautions and warnings and

Important notes at the end of this document.

Page 6 of 19

B32231

General purpose (wound)

Pulse handling capability

"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal

voltages, expressed in V/µs.

"k₀" represents the maximum permissible pulse characteristic of the waveform applied to the

capacitor, expressed in V²/µs.

Note:

The values of dV/dt and k₀provided below must not be exceeded in order to avoid damaging the

capacitor.

dV/dt values

Length of capacitor

14 mm

19 mm

27 mm

32 mm

V_R

V_RMS

V AC

63

V DC

100

250

400

630

dV/dt in V/µs

6

10

ꢀ

3

5

2

3

4

7

1.5

2.5

3

160

200

7

ꢀ

10

5

k₀values

Length of capacitor

14 mm

19 mm

27 mm

32 mm

V_R

V_RMS

V AC

63

V DC

100

250

400

630

k₀in V²/µs

1 200

5 000

ꢀ

600

2 500

400

1 500

3 200

8 800

300

1 250

2 400

6 300

160

200

5 600

ꢀ

12 500

Please read Cautions and warnings and

Important notes at the end of this document.

Page 7 of 19

B32231

General purpose (wound)

Impedance Z versus frequency f

(typical values)

Permissible AC voltage V_RMSversus frequency

Values can be obtained on request. In specific cases please provide a scaled voltage/ time graph

and state operating conditions.

Please read Cautions and warnings and

Important notes at the end of this document.

Page 8 of 19

B32231

General purpose (wound)

Mounting guidelines

1

Soldering

1.1

Solderability of leads

The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1.

Before a solderability test is carried out, terminals are subjected to accelerated ageing (to

IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far

higher than the upper category temperature of the capacitors, the terminal wires should be cut off

from the capacitor before the ageing procedure to prevent the solderability being impaired by the

products of any capacitor decomposition that might occur.

Solder bath temperature

Soldering time

235 ±5 °C

2.0 ±0.5 s

Immersion depth

Evaluation criteria:

Visual inspection

2.0 +0/ꢀ0.5 mm from capacitor body or seating plane

Wetting of wire surface by new solder ≥90%, free-flowing solder

1.2

Resistance to soldering heat

Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A.

Conditions:

Series

Solder bath temperature Soldering time

MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C

coated

10 ±1 s

uncoated (lead spacing > 10 mm)

MFP

MKP (lead spacing > 7.5 mm)

MKT boxed (case 2.5 × 6.5 × 7.2 mm)

5 ±1 s

(lead spacing ≤ 7.5 mm)

uncoated (lead spacing ≤ 10 mm)

insulated (B32559)

MKP

MKT

< 4 s

recommended soldering

profile for MKT uncoated

(lead spacing ≤ 10 mm) and

insulated (B32559)

Please read Cautions and warnings and

Important notes at the end of this document.

Page 9 of 19

B32231

General purpose (wound)

Immersion depth

2.0 +0/ꢀ0.5 mm from capacitor body or seating plane

Shield

Heat-absorbing board, (1.5 ±0.5) mm thick, between capacitor

body and liquid solder

Evaluation criteria:

Visual inspection

No visible damage

2% for MKT/MKP/MFP

5% for EMI suppression capacitors

As specified in sectional specification

∆C/C₀

tan δ

Please read Cautions and warnings and

Important notes at the end of this document.

Page 10 of 19

B32231

General purpose (wound)

1.3

General notes on soldering

Permissible heat exposure loads on film capacitors are primarily characterized by the upper cate-

gory temperature T_max. Long exposure to temperatures above this type-related temperature limit

can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical

characteristics. For short exposures (as in practical soldering processes) the heat load (and thus

the possible effects on a capacitor) will also depend on other factors like:

Pre-heating temperature and time

Forced cooling immediately after soldering

Terminal characteristics:

diameter, length, thermal resistance, special configurations (e.g. crimping)

Height of capacitor above solder bath

Shadowing by neighboring components

Additional heating due to heat dissipation by neighboring components

Use of solder-resist coatings

The overheating associated with some of these factors can usually be reduced by suitable coun-

termeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced

cooling process may possibly have to be included.

EPCOS recommends the following conditions:

Pre-heating with a maximum temperature of 110 °C

Temperature inside the capacitor should not exceed the following limits:

ꢀ MKP/MFP 110 °C

ꢀ MKT 160 °C

When SMD components are used together with leaded ones, the leaded film capacitors should

not pass into the SMD adhesive curing oven. The leaded components should be assembled af-

ter the SMD curing step.

Leaded film capacitors are not suitable for reflow soldering.

Uncoated capacitors

For uncoated MKT capacitors with lead spacings ≤10 mm (B32560/B32561) the following mea-

sures are recommended:

pre-heating to not more than 110 °C in the preheater phase

rapid cooling after soldering

Please read Cautions and warnings and

Important notes at the end of this document.

Page 11 of 19

B32231

General purpose (wound)

2

Cleaning

To determine whether the following solvents, often used to remove flux residues and other sub-

stances, are suitable for the capacitors described, refer to the table below:

Type

Ethanol,

isopropanol,

n-propanol

n-propanol-water

mixtures,

water with surface

tension-reducing

tensides (neutral)

Solvent from

table A (see

next page)

Solvent from

table B (see

next page)

MKT

(uncoated)

Suitable

Unsuitable

In part suitable Unsuitable

Suitable

MKT, MKP, MFP

(coated/boxed)

Suitable

Even when suitable solvents are used, a reversible change of the electrical characteristics may

occur in uncoated capacitors immediately after they are washed. Thus it is always recommended

to dry the components (e.g. 4 h at 70 °C) before they are subjected to subsequent electrical test-

ing.

Table A

Manufacturers' designations for trifluoro-trichloro-ethane-based cleaning solvents (selection)

Trifluoro-trichloro-

ethane

Mixtures of trifluoro-trichloro-ethane with ethanol and

isopropanol

Manufacturer

Freon TF

Freon TE 35; Freon TP 35; Freon TES

Frigen 113 TR-E; Frigen 113 TR-P; Frigen TR-E 35

Arklone A; Arklone L; Arklone K

Du Pont

Hoechst

ICI

Frigen 113 TR

Arklone P

Kaltron 113 MDR

Flugene 113

Kaltron 113 MDA; Kaltron 113 MDI; Kaltron 113 MDI 35 Kali-Chemie

Flugene 113 E; Flugene 113 IPA Rhone-Progil

Table B (worldwide banned substances)

Manufacturers' designations for unsuitable cleaning solvents (selection)

Mixtures of chlorinated hydrocarbons and ketones with fluorated hydrocarbons Manufacturer

Freon TMC; Freon TA; Freon TC

Arklone E

Du Pont

ICI

Kaltron 113 MDD; Kaltron 113 MDK

Flugene 113 CM

Kali-Chemie

Rhone-Progil

Please read Cautions and warnings and

Important notes at the end of this document.

Page 12 of 19

B32231

General purpose (wound)

3

Embedding of capacitors in finished assemblies

In many applications, finished circuit assemblies are embedded in plastic resins. In this case,

both chemical and thermal influences of the embedding ("potting") and curing processes must be

taken into account.

Our experience has shown that the following potting materials can be recommended: non-flexible

epoxy resins with acid-anhydride hardeners; chemically inert, non-conducting fillers; maximum

curing temperature of 100 °C.

Caution:

Consult us first if you wish to embed uncoated types!

Please read Cautions and warnings and

Important notes at the end of this document.

Page 13 of 19

B32231

General purpose (wound)

Cautions and warnings

Do not exceed the upper category temperature (UCT).

Do not apply any mechanical stress to the capacitor terminals.

Avoid any compressive, tensile or flexural stress.

Do not move the capacitor after it has been soldered to the PC board.

Do not pick up the PC board by the soldered capacitor.

Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified

lead spacing.

Do not exceed the specified time or temperature limits during soldering.

Avoid external energy inputs, such as fire or electricity.

Avoid overload of the capacitors.

The table below summarizes the safety instructions that must always be observed. A detailed de-

scription can be found in the relevant sections of the chapters "General technical information" and

"Mounting guidelines".

Topic

Safety information

Reference chapter

"General technical

information"

Storage conditions Make sure that capacitors are stored within the

4.5

specified range of time, temperature and humidity "Storage conditions"

conditions.

Flammability

Avoid external energy, such as fire or electricity

(passive flammability), avoid overload of the

capacitors (active flammability) and consider the

flammability of materials.

5.3

"Flammability"

Resistance to

vibration

Do not exceed the tested ability to withstand

vibration. The capacitors are tested to

IEC 60068-2-6.

5.2

"Resistance to vibration"

EPCOS offers film capacitors specially designed

for operation under more severe vibration regimes

such as those found in automotive applications.

Consult our catalog "Film Capacitors for

Automotive Electronics".

Please read Cautions and warnings and

Important notes at the end of this document.

Page 14 of 19

B32231

General purpose (wound)

Topic

Safety information

Reference chapter

"Mounting guidelines"

Soldering

Cleaning

Do not exceed the specified time or temperature 1 "Soldering"

limits during soldering.

Use only suitable solvents for cleaning capacitors. 2 "Cleaning"

Embedding of

capacitors in

When embedding finished circuit assemblies in

plastic resins, chemical and thermal influences

3 "Embedding of

capacitors in finished

assemblies"

finished assemblies must be taken into account.

Caution: Consult us first, if you also wish to

embed other uncoated component types!

Please read Cautions and warnings and

Important notes at the end of this document.

Page 15 of 19

B32231

General purpose (wound)

Symbols and terms

Symbol

α

English

German

Heat transfer coefficient

Wärmeübergangszahl

α_C

Temperature coefficient of capacitance Temperaturkoeffizient der Kapazität

A

Capacitor surface area

Kondensatoroberfläche

Feuchtekoeffizient der Kapazität

Kapazität

β_C

Humidity coefficient of capacitance

Capacitance

C

C_R

Rated capacitance

Nennkapazität

∆C

∆C/C

Absolute capacitance change

Relative capacitance change (relative

deviation of actual value)

Absolute Kapazitätsänderung

Relative Kapazitätsänderung (relative

Abweichung vom Ist-Wert)

∆C/C_R

Capacitance tolerance (relative deviation Kapazitätstoleranz (relative Abweichung

from rated capacitance)

Time differential

vom Nennwert)

dt

Differentielle Zeit

∆t

Time interval

Zeitintervall

∆T

Absolute temperature change

(self-heating)

Absolute Temperaturänderung

(Selbsterwärmung)

∆tan δ

∆V

Absolute change of dissipation factor

Absolute voltage change

Absolute Änderung des Verlustfaktors

Absolute Spannungsänderung

dV/dt

Time differential of voltage function (rate Differentielle Spannungsänderung

of voltage rise)

(Spannungsflankensteilheit)

Spannungsänderung pro Zeitintervall

Aktivierungsenergie zur Diffusion

Eigeninduktivität

∆V/∆t

E

Voltage change per time interval

Activation energy for diffusion

Self-inductance

ESL

ESR

f

Equivalent series resistance

Frequency

Ersatz-Serienwiderstand

Frequenz

f₁

Frequency limit for reducing permissible Grenzfrequenz für thermisch bedingte

AC voltage due to thermal limits

Reduzierung der zulässigen

Wechselspannung

f₂

Frequency limit for reducing permissible Grenzfrequenz für strombedingte

AC voltage due to current limit

Reduzierung der zulässigen

Wechselspannung

f_r

Resonant frequency

Resonanzfrequenz

F_D

Thermal acceleration factor for diffusion Therm. Beschleunigungsfaktor zur

Diffusion

F_T

i

Derating factor

Deratingfaktor

Current (peak)

Stromspitze

I_C

Category current (max. continuous

current)

Kategoriestrom (max. Dauerstrom)

Please read Cautions and warnings and

Important notes at the end of this document.

Page 16 of 19

B32231

General purpose (wound)

Symbol

I_RMS

English

German

(Sinusoidal) alternating current,

root-mean-square value

Capacitance drift

(Sinusförmiger) Wechselstrom

i_z

Inkonstanz der Kapazität

Impulskennwert

k₀

L_S

λ

Pulse characteristic

Series inductance

Serieninduktivität

Failure rate

Ausfallrate

λ₀

Constant failure rate during useful

service life

Konstante Ausfallrate in der

Nutzungsphase

λ_test

P_diss

P_gen

Q

Failure rate, determined by tests

Dissipated power

Experimentell ermittelte Ausfallrate

Abgegebene Verlustleistung

Erzeugte Verlustleistung

Wärmeenergie

Generated power

Heat energy

ρ

Density of water vapor in air

Universal molar constant for gases

Ohmic resistance of discharge circuit

Dichte von Wasserdampf in Luft

Allg. Molarkonstante für Gas

Ohmscher Widerstand des

Entladekreises

R

R_i

Internal resistance

Insulation resistance

Parallel resistance

Series resistance

severity (humidity test)

Time

Innenwiderstand

R_ins

R_P

R_S

S

Isolationswiderstand

Parallelwiderstand

Serienwiderstand

Schärfegrad (Feuchtetest)

Zeit

t

T

Temperature

Temperatur

τ

Time constant

Zeitkonstante

tan δ

tan δ_D

Dissipation factor

Dielectric component of dissipation

factor

Verlustfaktor

Dielektrischer Anteil des Verlustfaktors

tan δ_P

tan δ_S

T_A

Parallel component of dissipation factor Parallelanteil des Verlfustfaktors

Series component of dissipation factor

Ambient temperature

Serienanteil des Verlustfaktors

Umgebungstemperatur

T_max

T_min

Upper category temperature

Lower category temperature

Obere Kategorietemperatur

Untere Kategorietemperatur

t_OL

Operating life at operating temperature Betriebszeit bei Betriebstemperatur und

and voltage

-spannung

T_op

T_R

Operating temperature

Rated temperature

Reference temperature

Reference service life

AC voltage

Beriebstemperatur

Nenntemperatur

Referenztemperatur

Referenz-Lebensdauer

Wechselspannung

T_ref

t_SL

V_AC

Please read Cautions and warnings and

Important notes at the end of this document.

Page 17 of 19

B32231

General purpose (wound)

Symbol

V_C

English

German

Category voltage

Category AC voltage

Kategoriespannung

(Sinusförmige)

V_C,RMS

Kategorie-Wechselspannung

Teilentlade-Einsatzspannung

Ladespannung

V_CD

V_ch

V_DC

V_FB

V_i

Corona-discharge onset voltage

Charging voltage

DC voltage

Gleichspannung

Fly-back capacitor voltage

Input voltage

Spannung (Flyback)

Eingangsspannung

Ausgangssspannung

Betriebsspannung

V_o

Output voltage

V_op

V_p

Operating voltage

Peak pulse voltage

Peak-to-peak voltage Impedance

Rated voltage

Impuls-Spitzenspannung

Spannungshub

V_pp

V_R

Nennspannung

Amplitude of rated AC voltage

Amplitude der Nenn-Wechselspannung

R

V_RMS

(Sinusoidal) alternating voltage,

root-mean-square value

S-correction voltage

(Sinusförmige) Wechselspannung

V_SC

V_sn

Spannung bei Anwendung "S-correction"

Spannung bei Anwendung

"Beschaltung"

Snubber capacitor voltage

Z

Impedance

Scheinwiderstand

Lead spacing

Rastermaß

Please read Cautions and warnings and

Important notes at the end of this document.

Page 18 of 19

Important notes

The following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical re-

quirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application.

As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar

with them than the customers themselves. For these reasons, it is always ultimately incum-

bent on the customer to check and decide whether an EPCOS product with the properties de-

scribed in the product specification is suitable for use in a particular customer application.

2. We also point out that in individual cases, a malfunction of electronic components or

failure before the end of their usual service life cannot be completely ruled out in the

current state of the art, even if they are operated as specified. In customer applications

requiring a very high level of operational safety and especially in customer applications in

which the malfunction or failure of an electronic component could endanger human life or

health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by

means of suitable design of the customer application or other action taken by the customer

(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by

third parties in the event of malfunction or failure of an electronic component.

3. The warnings, cautions and product-specific notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as hazardous). Useful information on this will be found in our Ma-

terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-

tailed questions, please contact our sales offices.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

specifications. Please check therefore to what extent product descriptions and specifications

contained in this publication are still applicable before or when you place an order. We also

reserve the right to discontinue production and delivery of products. Consequently, we

cannot guarantee that all products named in this publication will always be available. The

aforementioned does not apply in the case of individual agreements deviating from the fore-

going for customer-specific products.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-

sion of the "General Terms of Delivery for Products and Services in the Electrical In-

dustry" published by the German Electrical and Electronics Industry Association

(ZVEI).

7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP,

MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT,

SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse,

WindCap are trademarks registered or pending in Europe and in other countries. Further

information will be found on the Internet at www.epcos.com/trademarks.

Page 19 of 19


型号：	B32231D1225J000
厂家：	EPCOS
描述：	CAPACITOR, METALLIZED FILM, POLYESTER, 100V, 2.2uF, THROUGH HOLE MOUNT, AXIAL LEADED, LEAD FREE
文件：	总21页 (文件大小：290K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

B32231D1225J000 [EPCOS]

相关型号：

B32231D1225K000

B32231D1334000

B32231D1334J000

B32231D1334K000

B32231D1335000

B32231D1335J000

B32231D1335K000

B32231D1335M000

B32231D1474000

B32231D1474J000

B32231D1474K000

B32231D1475000