B30654-D5013-Q824 [EPCOS]
Duplexer, 836.5MHz(Tx), 897.5MHz(Rx), ROHS COMPLIANT PACKAGE-24;
| 型号： | B30654-D5013-Q824 |
| 厂家： | 
EPCOS |
| 描述： | Duplexer, 836.5MHz(Tx), 897.5MHz(Rx), ROHS COMPLIANT PACKAGE-24 PCS GSM PCN CD 过程控制系统 个人通信 |
| 文件： | 总16页 (文件大小：284K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
RF modules for mobile communications
Series/Type: D5013
The following products presented in this data sheet are being withdrawn.
Ordering Code
Substitute Product
Date of
Deadline Last
Orders
Last Shipments
2010-08-31
Withdrawal
B30654D5013Q824
2009-08-21
2010-05-31
For further information please contact your nearest EPCOS sales office, which will also support you
in selecting a suitable substitute. The addresses of our worldwide sales network are presented at
www.epcos.com/sales.
EPCOS
SAW Components
B30654-D5013-Q824
D5013
SAW Frontend Module for Mobile Communication
Data Sheet
Revision History: Changes compared to previous iteration issue
ISSUE
ORIGINATOR
DETAIL SPEC CHANGES
DATE
1.0
Hoefter
Initial Release
22.11.2007
Please read cautions and warnings and
important notes at the end of this document.
2
Dec 19, 2008
EPCOS
SAW Components
B30654-D5013-Q824
D5013
SAW Frontend Module for Mobile Communication
Data Sheet
Application
■ Low-loss SAW frontend module for mobile telephone system
■ Covering GSM850, GSM900, GSM1800, GSM1900,
WCDMA 2100 bands
■ Integration of Tx low pass filters, switches and decoder
■ Integration of GSM 850, EGSM, PCN and PCS Rx SAWs
■ Balanced outputs of all Rx ports
■ Integration of ESD protection at Ant port to 8 kV
acc. IEC-61000-4-2 (contact discharge)
Features
■ Package for Surface Mounted Technology (SMT)
■ RoHS compliant
■ Approx. weight 100 mg
■ Ni/Pd/Au-plated terminals
Pin configuration
■ 1
■ 4
Antenna
Ctrl 1
■ 5
Ctrl 2
■ 6
Ctrl 3
■ 7
VDD
■ 9
■ 11
PCN / PCS Tx
GSM850 / EGSM Tx
PCN Rx
PCS Rx
EGSM Rx
GSM850 Rx
GND
■ 12,13
■ 14,15
■ 16,17
■ 18,19
■ 20
■ 21
■ 22
WCDMA 2100
GND
■ 2,3,8,10,23,24
GND
Please read cautions and warnings and
important notes at the end of this document.
3
Dec 19, 2008
EPCOS
SAW Components
B30654-D5013-Q824
D5013
SAW Frontend Module for Mobile Communication
Data Sheet
Maximum Ratings
source and load impedance 50 Ω
peak power of GSM signal
Input power Tx EGSM
PIN
+35
dBm
dBm
source and load impedance 50 Ω
peak power of GSM signal
Input power Tx DCS / PCS
Input power WCDMA
Input power Rx ports
PIN
PIN
PIN
+33
+29
+10
dBm source and load impedance 50 Ω
source and load impedance 50 Ω
dBm
peak power of GSM signal
4:8
CW
GSM
WCDMA
Transmitter duty cycle
Operable temperature range
Storage temperature range
Storage temperature range
Power supply voltage
T
T
–30 ... +85 °C
–30 ... +85 °C stored as individual component
Tstg
0 ... +40
°C stored in tape
VDD +0.3 ... 4
V
+0.3 ...
VDD
DC voltage
DC voltage
V
V
at any input, except Rx ports
V
DD + 0.3
5
VDC
at Rx ports
ESD Ratings
EN 61000-4-2
contact discharge
Antenna port
Vmax
Vmax
Vmax
Vmax
Vmax
Vmax
Vmax
8
kV
V
EN 61000-4-2
contact discharge
Tx and WCDMA ports
control ports
500
500
1
EN 61000-4-2
contact discharge
V
EN 61000-4-2
contact discharge
VDD port
kV
V
JESD22-A114B
Human Body Model
Rx ports
250
100
50
JESD22-A115A
Machine Model
GSM850 / EGSM Rx ports
PCN / PCS Rx ports
V
JESD22-A115A
Machine Model
V
Please read cautions and warnings and
important notes at the end of this document.
4
Dec 19, 2008
EPCOS
SAW Components
B30654-D5013-Q824
D5013
SAW Frontend Module for Mobile Communication
Data Sheet
Control Logic
Switch Mode
GSM850 / EGSM TX
PCN / PCS TX
UMTS2100
GSM850 RX
EGSM RX
CTRL 1
CTRL 2
CTRL 3
1
1
1
0
0
0
0
0
1
0
0
0
1
1
1
0
0
0
1
1
0
PCN RX
PCS RX
Control Characteristics
min. typ. max.
Power supply voltage
Control voltage high
Control voltage low
Power supply current max
Control current max
Switching Speed
VDD 2.5 2.75 3.2
V
V
VDD
VDC 1.4
VDD
0.4
50
2
Ctrl 1, Ctrl 2, Ctrl 3
Ctrl 1, Ctrl 2, Ctrl 3
VDC
IDD
IDC
T
V
13
µA
µA
µs
3
Please read cautions and warnings and
important notes at the end of this document.
5
Dec 19, 2008
EPCOS
SAW Components
B30654-D5013-Q824
D5013
SAW Frontend Module for Mobile Communication
Data Sheet
Module pinning and size D5013
Package MC240E
M
M112B
D5013
Please read cautions and warnings and
important notes at the end of this document.
6
Dec 19, 2008
EPCOS
SAW Components
B30654-D5013-Q824
D5013
SAW Frontend Module for Mobile Communication
Data Sheet
Block diagram
RX_PCS
RX_PCN
RX_EGSM
RX_GSM850
WCDMA 2100
ANT
ESD
TX_PCN/PCS
TX_GSM850/
EGSM
Decoder
Please read cautions and warnings and
important notes at the end of this document.
7
Dec 19, 2008
EPCOS
SAW Components
B30654-D5013-Q824
D5013
SAW Frontend Module for Mobile Communication
Data Sheet
Characteristics GSM850/EGSM TX
Operating temperature range:
Terminating source impedance:
Terminating load impedance:
T
= +30 ... +85°C
ZI = 50 Ω
ZO = 50 Ω
D5013
typ.
@25 °C
min.
max.
Passband frequency GSM850 Tx
Insertion loss
fTx
824
—
849
1.5
0.4
1.5
1.5
—
ILTx
1.2
0.05
1.1
1.15
38
dB CTQ
dB
Amplitude ripple
VSWR Antenna
—
VSWR
VSWR
—
VSWR Tx
—
Attenuation
2 fTx
3 fTx
4 fTx
30
25
20
dB
dB
dB
55
—
37
—
Passband frequency EGSM Tx
Insertion loss
fTx
880
—
915
1.5
0.4
1.5
1.5
—
ILTx
1.25
0.05
1.15
1.1
46
dB CTQ
dB
Amplitude ripple
VSWR Antenna
—
VSWR
VSWR
—
VSWR Tx
—
Attenuation
2 fTx
3 fTx
4 fTx
30
25
20
dB
dB
dB
50
—
38
—
Isolation
fTx GSM850/EGSM Tx -> GSM850 Rx
fTx GSM850/EGSM Tx -> EGSM Rx
fTx GSM850/EGSM Tx -> PCN Rx
fTx GSM850/EGSM Tx -> PCS Rx
fTx GSM850/EGSM Tx -> WCDMA2100
30
35
35
35
20
20
15
41
60
44
61
28
23
27
—
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
dB
2 fTx PCN/PCS Tx
3 fTx PCN/PCS Tx
-> Ant
-> Ant
Harmonic generation PIN = 35 dBm
2 fTx
3 fTx
—
—
—
–56
–48
–72
–38
–38
–38
dBm
dBm
dBm
4 ... 12 fTx
Please read cautions and warnings and
important notes at the end of this document.
8
Dec 19, 2008
EPCOS
SAW Components
B30654-D5013-Q824
D5013
SAW Frontend Module for Mobile Communication
Data Sheet
Characteristics PCN/PCS TX
Operating temperature range:
Terminating source impedance:
Terminating load impedance:
T
= –30 ... +85 °C
ZI = 50 Ω
ZO = 50 Ω
D5013
typ.
@25 °C
min.
max.
Passband frequency
Insertion loss
fTx
1710
—
1910
1.5
0.4
1.5
1.5
—
ILTx
1.3
0.15
1.2
1.2
37
dB CTQ
dB
Amplitude ripple
VSWR Antenna
VSWR Tx
—
VSWR
VSWR
—
—
Attenuation
2 fTx
3 fTx
30
25
dB
dB
32
—
Isolation
fTx PCN/PCS Tx
-> GSM850 Rx
-> EGSM Rx
-> PCN Rx
40
40
30
35
20
20
15
55
67
44
56
45
45
42
—
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
dB
fTx PCN/PCS Tx
fTx PCN/PCS Tx
fTx PCN/PCS Tx
fTx PCN/PCS Tx
-> PCS Rx
-> WCDMA2100
2 fTx GSM850/EGSM Tx -> Ant
3 fTx GSM850/EGSM Tx -> Ant
Harmonic generation PIN = 33 dBm
2 fTx
3 fTx
—
—
—
–51
–55
–60
–38
–38
–38
dBm
dBm
dBm
4 ... 7 fTx
Please read cautions and warnings and
important notes at the end of this document.
9
Dec 19, 2008
EPCOS
SAW Components
B30654-D5013-Q824
D5013
SAW Frontend Module for Mobile Communication
Data Sheet
Characteristics WCDMA2100
Operating temperature range:
Terminating source impedance:
Terminating load impedance:
T
= –30 ... +85 °C
ZI = 50 Ω
ZO = 50 Ω
D5013
min.
1920
—
typ.
max.
1980
1.2
Passband frequency
Insertion loss
Insertion loss
Amplitude ripple
VSWR Antenna
VSWR Tx
fTx
@25 °C
ILTx
1.0
1.15
0.05
1.3
dB CTQ
dB
—
1.3
—
0.4
dB
VSWR
VSWR
—
1.5
—
1.25
1.5
Passband frequency
Insertion loss
Insertion loss
Amplitude ripple
VSWR Antenna
VSWR Tx
fRx
2110
—
2170
1.2
@25 °C
ILRx
1.1
1.2
dB CTQ
dB
—
1.3
—
0.04
1.3
0.4
dB
VSWR
VSWR
—
1.5
—
1.2
1.5
Intermodulation
PIM- WCDMA2100-Rx
at 2110 ... 2170 MHz
PIM
—
–113
–99
dBm
PWCDMA = +20 dBm at 1920 ... 1980 MHz
PCW-Ant = –15 dBm at 1730 ... 1790 MHz
at worst case phase angle at WCDMA port
Harmonic generation PIN = 27 dBm
2 fTx
3 fTx
—
—
—
–59
–69
–69
–38
–38
–38
dBm
dBm
dBm
4 ... 7 fTx
Please read cautions and warnings and
important notes at the end of this document.
10 Dec 19, 2008
EPCOS
SAW Components
B30654-D5013-Q824
D5013
SAW Frontend Module for Mobile Communication
Data Sheet
Characteristics GSM850 RX
Operating temperature range:
Terminating source impedance:
Terminating load impedance:
T
= –30 ... +85 °C
ZI = 50 Ω
ZO = 150 Ω || 68 nH
D5013
typ.
@25 °C
min.
max.
Passband frequency
fRx
869
—
—
—
—
—
—
—
—
894
3.3
3.6
3.8
1.5
±1.5
±10
2.3
2.3
Insertion loss
Insertion loss
Insertion loss
Amplitude ripple
@ 25 °C
ILRx
2.4
2.6
2.6
0.5
±0.8
±4
dB CTQ
dB
@ –10 °C ... +85 °C
@ –30 °C ... +85 °C
dB
dB
Amplitude imbalance (|S31/S21|)
dB
Phase imbalance
VSWR Antenna
VSWR Rx
φ(S31) -
φ(S21) - 180
°
deg
VSWR
VSWR
1.8
2.0
Attenuation
0
... 824 MHz
30
30
23
30
40
30
40
30
40
30
40
30
36
35
31
35
48
40
46
42
47
44
44
43
—
—
—
—
—
—
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
824 ... 849 MHz
914 ... 1000 MHz
1000 ... 1738 MHz
1738 ... 1788 MHz
1788 ... 2400 MHz
2400 ... 2500 MHz
2500 ... 2607 MHz
2607 ... 2682 MHz
2682 ... 4345 MHz
4345 ... 4470 MHz
4470 ... 6000 MHz
Isolation
fTx GSM850 GSM850/EGSM Tx->Ant
20
39
—
dB
Please read cautions and warnings and
important notes at the end of this document.
11 Dec 19, 2008
EPCOS
SAW Components
B30654-D5013-Q824
D5013
SAW Frontend Module for Mobile Communication
Data Sheet
Characteristics EGSM RX
Operating temperature range:
Terminating source impedance:
Terminating load impedance:
T
= –30 ... +85 °C
ZI = 50 Ω
ZO = 150 Ω || 56 nH
D5013
typ.
@25 °C
min.
max.
Passband frequency
fRx
925
—
—
—
—
—
—
—
—
960
3.3
3.6
3.8
1.5
±1.5
±10
2.3
2.3
Insertion loss
Insertion loss
Insertion loss
Amplitude ripple
@ 25 °C
ILRx
2.6
2.7
2.9
0.6
±0.6
±3
dB CTQ
dB
@ –10 °C ... +85 °C
@ –30 °C ... +85 °C
dB
dB
Amplitude imbalance (|S31/S21|)
dB
Phase imbalance
VSWR Antenna
VSWR Rx
φ(S31) -
φ(S21) - 180
°
deg
VSWR
VSWR
1.8
2.1
Attenuation
0
... 880 MHz
30
30
18
25
30
35
30
35
30
35
30
40
30
38
35
26
31
37
44
40
43
42
44
42
50
49
—
—
—
—
—
—
—
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
880 ... 905 MHz
905 ... 915 MHz
980 ... 1020 MHz
1020 ... 1850 MHz
1850 ... 1920 MHz
1920 ... 2400 MHz
2400 ... 2500 MHz
2500 ... 2775 MHz
2775 ... 2880 MHz
2880 ... 4625 MHz
4625 ... 4800 MHz
4800 ... 6000 MHz
Isolation
fTx EGSM GSM850/EGSM Tx->Ant
20
35
—
dB
Please read cautions and warnings and
important notes at the end of this document.
12 Dec 19, 2008
EPCOS
SAW Components
B30654-D5013-Q824
D5013
SAW Frontend Module for Mobile Communication
Data Sheet
Characteristics PCN RX
Operating temperature range:
Terminating source impedance:
Terminating load impedance:
T
= –30 ... +85 °C
ZI = 50 Ω
ZO = 150 Ω || 12 nH
D5013
typ.
@25 °C
min.
max.
Passband frequency
fRx
1805
—
1880
3.6
Insertion loss
Insertion loss
Insertion loss
Amplitude ripple
@ 25 °C
ILRx
2.9
3.3
3.6
0.6
±0.9
±3
dB CTQ
dB
@ –10 °C ... +85 °C
@ –30 °C ... +85 °C
—
3.8
—
4.1
dB
—
1.5
dB
Amplitude imbalance (|S31/S21|)
—
±1.5
±10
2.3
dB
Phase imbalance
VSWR Antenna
VSWR Rx
φ(S31) -
φ(S21) - 180
°
—
deg
VSWR
VSWR
—
1.8
1.3
—
2.3
Attenuation
0
... 1705 MHz
30
12
14
23
30
30
30
40
30
40
30
45
18
22
30
35
47
38
55
60
60
60
—
—
—
—
—
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
1705 ... 1785 MHz
1920 ... 1980 MHz
1980 ... 2100 MHz
2100 ... 2400 MHz
2400 ... 2500 MHz
2500 ... 3610 MHz
3610 ... 3760 MHz
3760 ... 5415 MHz
5415 ... 5640 MHz
5640 ... 6000 MHz
Isolation
fTx PCN/PCS PCN/PCS Tx -> Ant
20
22
—
dB
Please read cautions and warnings and
important notes at the end of this document.
13 Dec 19, 2008
EPCOS
SAW Components
B30654-D5013-Q824
D5013
SAW Frontend Module for Mobile Communication
Data Sheet
Characteristics PCS RX
Operating temperature range:
Terminating source impedance:
Terminating load impedance:
T
= –30 ... +85 °C
ZI = 50 Ω
ZO = 180 Ω || 12 nH
D5013
typ.
@25 °C
min.
max.
Passband frequency
fRx
1930
—
1990
3.6
Insertion loss
Insertion loss
Insertion loss
Amplitude ripple
@ 25 °C
ILRx
3.0
3.3
3.7
0.6
±0.8
±4
dB CTQ
dB
@ –10 °C ... +85 °C
@ –30 °C ... +85 °C
—
3.8
—
4.1
dB
—
1.5
dB
Amplitude imbalance (|S31/S21|)
—
±1.5
±10
2.3
dB
Phase imbalance
VSWR Antenna
VSWR Rx
φ(S31) -
φ(S21) - 180
°
—
deg
VSWR
VSWR
—
1.6
1.6
—
2.3
Attenuation
0
... 1830 MHz
30
10
10
20
25
35
30
40
30
40
30
35
19
18
24
32
43
39
60
58
58
60
—
—
—
—
—
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
1830 ... 1910 MHz
2010 ... 2070 MHz
2070 ... 2100 MHz
2100 ... 2400 MHz
2400 ... 2500 MHz
2500 ... 3860 MHz
3860 ... 3980 MHz
3980 ... 5790 MHz
5790 ... 5970 MHz
5970 ... 6000 MHz
Isolation
fTx PCN/PCS PCN/PCS Tx -> Ant
20
22
—
dB
Please read cautions and warnings and
important notes at the end of this document.
14 Dec 19, 2008
EPCOS
SAW Components
B30654-D5013-Q824
D5013
SAW Frontend Module for Mobile Communication
Data Sheet
Notes
Type
D5013
Ordering code
B30654-D5013-Q824
C61157-A4-A63
F61074-V8207-Z000
L_1126
Marking, package and recommended pad layout
Packaging
Date codes
S-parameters
Soldering profile
S_6001
For further information please contact your local EPCOS sales office or visit our webpage
at www.epcos.com .
Published by EPCOS AG
Surface Acoustic Wave Components Division
P.O. Box 80 17 09, 81617 Munich, GERMANY
© EPCOS AG 2005. Reproduction, publication and dissemination of this brochure and the infor-
mation contained therein without EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of
the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Elec-
tronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG
or the international Representatives.
Due to technical requirements components may contain dangerous substances. For information
on the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
15 Dec 19, 2008
EPCOS
SAW Components
B30654-D5013-Q824
D5013
SAW Frontend Module for Mobile Communication
Data Sheet
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties
described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic compo-
nents or failure before the end of their usual service life cannot be completely ruled out
in the current state of the art, even if they are operated as specified. In customer applica-
tions requiring a very high level of operational safety and especially in customer applications
in which the malfunction or failure of a passive electronic component could endanger human
life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured
by means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Conse-
quently, we cannot guarantee that all products named in this publication will always be avail-
able.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SIFI, SIKOREL, Silver-
Cap, SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered
or pending in Europe and in other countries. Further information will be found on the Internet
at www.epcos.com/trademarks.
Please read cautions and warnings and
important notes at the end of this document.
16 Dec 19, 2008
相关型号：
©2020 ICPDF网 联系我们和版权申明