B25834-D0685-K004 [EPCOS]
MKV AC capacitors; MKV交流电容器
| 型号： | B25834-D0685-K004 |
| 厂家： | 
EPCOS |
| 描述： | MKV AC capacitors |
| 文件： | 总12页 (文件大小：298K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MKV AC Capacitors
B25832
MKV AC capacitors
Damping, Commutating
Ordering code:
B25834
Date:
September 2005
© EPCOS AG 2005. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
MKV AC Capacitors
B25834
Damping, Commutating
Features
■ High dielectric strength
■ High peak-current capability
Applications
■ For damping and commutating in
the medium frequency range
■ For general AC applications
Construction
■ Self-healing
■ Plastic dielectric
■ Oil-impregnated tubular windings (no PCB)
■ Metal-sprayed end faces ensure reliable contacting
■ Cylindrical aluminum case
■ Plastic or ceramic lead-throughs
■ Mounting bolts M8 or M12
Terminals
■ Screw terminals M10
■ Tab connectors 6.3 mm
■ Dual tab connectors 6.3 mm and 9.5 mm
Mounting
■ If the vibration stress is ≤ 5 g and the capacitors are ≤ 60 mm
in diameter and ≤ 160 mm in height, the bolt is used for mounting.
Grounding
■ Mounting bolts for grounding in accordance with VDE 0100
■ Grounding identification in accordance with DIN 40 011
Overpressure disconnector (mechanical)
When the overpressure disconnector responds,
the capacitor extends by up to 8 mm.
So leave sufficient space above the terminals when mounting the capacitor.
Individual data sheets
Individual data sheets contain detailed specification incl. thermal data.
Upon request, these data sheets are available for each capacitor type.
Please read Cautions and warnings and
Important notes at the end of this document.
2
09/05
MKV AC Capacitors
B25834
Damping, Commutating
Technical data
Standards
IEC 1071-1/2
EN 61071-1/2
VDE 0560 part 120 and 121
Dielectric dissipation factor
Capacitance tolerance
tan δ0
2 x 10–4
For CN < 1.0 μF ± 20 %, for CN ≥ 1.0 μF ± 10 %
Max. repetitive rate
of voltage rise
î
C
IS
---
C
---
(du/dt)max
(du/dt)s
Max. non-repetitive rate
of voltage rise
Climatic data:
Min. operating temperature
Max. operating temperature
Average relative humidity
Tmin
– 25 °C
+ 85 °C
Tmax
≤ 95 % (screw terminals/dual tab 9.5 mm)
≤ 75 % (dual tab 6.3 mm/tab 6.3 mm)
Failure quota
αFQ(co)
tLD(co)
Tstg
300 failures per 109 component hours
Load duration
100 000 h
– 55/+ 85 °C
25/085/56
Storage temperature limit
IEC climatic category
(IEC 68-1 and 2)
Test A, cold
– 25 °C
Test B, dry heat
+ 85 °C
Test Ca, damp heat, steady state
56 days/40 °C/93 % rel. humidity
Values after test Ca:
Capacitance change
ΔC/C
≤ 1 %
CR
Screw terminals, Dual tab Tab
dual tab 9.5 mm 6.3 mm 6.3 mm
≥ 3000 MΩ ≥ 1000 MΩ
≥ 3000 s ≥ 1000 s
≤ 3 x 10–4 ≤ 3 x10–4
Insulation resistance
Rins
≤ 1 μF ≥ 10 000 MΩ
>1 μF ≥ 10 000 s
Self-discharge time constant
τ = Rins x C
≤ 1x10–4
Dissipation factor change
Test data:
Δtan δ
AC test voltage
between terminals
VTT
1.25 x VN, 50 Hz, 10 s (or DC 1.75 x VN, 10 s)
between terminals and case VTC
2 x Vi + 1000 V, 50 Hz, 10 s
Insulating voltage Vi = max. recurrent peak
ˆ
v
2
voltage
/
CR
Screw terminals,
dual tab 9.5 mm
Dual tab 6.3 mm,
tab 6.3 mm
Insulation resistance
Self-discharge time constant
Rins
τ = Rins x C
≤ 1 μF ≥ 10 000 MΩ
>1 μF ≥ 10 000 s
≥ 3000 MΩ
≥ 3000 s
≤ 3 x 10–4
Dissipation factor (50 Hz)
tan δ
Please read Cautions and warnings and
Important notes at the end of this document.
3
09/05
MKV AC Capacitors
B25834
Damping, Commutating
Characteristics and ordering codes
1)
CR
Imax
A
î
Is
A
RS
20 °C
Lself Dimensions Fig. Appr. Ordering code
d × l
weight
μF
A
mΩ
nH mm
g
ˆ
v = 600 V
vs = 860 V
VTT = AC 620 V, 10 s
VTC = AC 2000 V, 10 s
VR = AC 500 V
33
47
68
100
220
18
80
80
80
80
1300
1900
2700
3300 4.9
4700 1.9 110 79.2 × 104
6800 1.5 110 99.3 × 104
90 60 × 86
3
2
2
2
2
290 B25834-L3336-K009
610 B25834-D3476-K004
970 B25834-D3686-K004
1500 B25834-D3107-K004
2300 B25834-D3227-K004
4000 10000 1.4 180 79.2 × 248
8800 22000 1.2 180 99.3 × 248
ˆ
v = 750 V
VTT = AC 750 V, 10 s
VTC = AC 2100 V, 10 s
VR = AC 600 V
vs = 1000 V
0.68 10
1.0 10
1.5 16
2.2 16
3.3 16
4.7 16
6.8 16
110
160
240
350
530
190
270
400
600
270 25.0
50 25 × 48
50 25 × 48
50 30 × 48
50 30 × 48
50 35 × 48
90 30 × 80
90 35 × 80
90 40 × 86
90 50 × 86
5
5
6
6
7
6
7
3
3
2
2
4
2
4
2
2
2
30 B25834-F4684-M001
30 B25834-F4105-K001
50 B25834-F4155-K001
50 B25834-F4225-K001
60 B25834-F4335-K001
70 B25834-F4475-K001
100 B25834-F4685-K001
130 B25834-L4106-K009
200 B25834-L4156-K009
400 B25834-D4226-K004
610 B25834-D4336-K004
610 B25834-D4336-K009
780 B25834-D4476-K004
780 B25834-D4476-K009
960 B25834-D4686-K004
1500 B25834-D4107-K004
1900 B25834-D4157-K004
400 18.0
600 14.0
880 10.0
1300 8.7
470 16.0
680 13.0
1000 8.0
1500 6.5
2200 3.1 110 64.2 × 104
3300 2.4 110 79.2 × 104
3300 2.4 110 79.2 × 104
4700 2.0 110 89.3 × 104
4700 2.0 110 89.3 × 104
6800 1.7 180 64.2 × 248
10
15
18
18
60
80
64
80
64
80
80
80
22
33
880
1300
1300
1900
1900
2700
33
47
47
68
100
150
4000 10000 1.5 180 79.2 × 248
6000 15000 1.3 180 89.3 × 248
ˆ
v = 940 V
VTT = AC 930 V, 10 s
VTC = AC 2400 V, 10 s
VR = AC 750 V
vs = 1300 V
4.7 16
6.8 18
240
340
500
590 13.0
90 35.0 × 80
90 40.0 × 86
90 50.0 × 86
90 60.0 × 86
7
3
3
3
2
4
2
100 B25834-F5475-K001
130 B25834-L5685-K009
200 B25834-L5106-K009
290 B25834-L5156-K009
610 B25834-D5226-K004
610 B25834-D5226-K009
780 B25834-D5336-K004
850 8.4
1250 7.0
1900 5.9
2800 2.6 110 79.2 × 104
2800 2.5 110 79.2 × 104
4100 2.0 110 89.3 × 104
10
15
22
22
33
18
18
80
64
80
750
1100
1100
1700
1) Other capacitance values upon request
Please read Cautions and warnings and
Important notes at the end of this document.
4
09/05
MKV AC Capacitors
B25834
Damping, Commutating
Characteristics and ordering codes
1)
CR
Imax
î
Is
RS
Lself Dimensions Fig. Appr. Ordering code
20 °C
d × l
weight
μF
A
A
A
mΩ
nH mm
g
33
47
68
64
80
80
80
1700
2400
3400
4100 1.9 110 89.3 × 104
5900 1.7 180 64.2 × 248
8500 1.6 180 79.2 × 248
4
2
2
2
780 B25834-D5336-K009
960 B25834-D5476-K004
1500 B25834-D5686-K004
1900 B25834-D5107-K004
100
5000 12500 1.4 180 89.3 × 248
ˆ
v = 1100 V
VTT = AC 1150 V, 10 s
VTC = AC 2600 V, 10 s
VR = AC 900 V
vs = 1500 V
0.10 10
0.15 10
0.22 10
0.33 10
0.47 10
0.68 10
1.0 16
1.5 16
2.2 16
3.3 16
4.7 18
6.8 18
50
70
100
90
120 33.0
50 25.0 × 48
50 25.0 × 48
50 25.0 × 48
50 25.0 × 48
50 25.0 × 48
50 25.0 × 48
50 30.0 × 48
50 35.0 × 48
90 30.0 × 80
90 35.0 × 80
90 40.0 × 86
90 50.0 × 86
90 60.0 × 86
5
5
5
5
5
5
6
7
6
7
3
3
3
2
4
2
4
2
2
2
30 B25834-F6104-M001
30 B25834-F6154-M001
30 B25834-F6224-M001
30 B25834-F6334-M001
30 B25834-F6474-M001
30 B25834-F6684-M001
50 B25834-F6105-K001
60 B25834-F6155-K001
70 B25834-F6225-K001
100 B25834-F6335-K001
130 B25834-L6475-K009
200 B25834-L6685-K009
290 B25834-L6106-K009
610 B25834-D6156-K004
610 B25834-D6156-K009
780 B25834-D6226-K004
780 B25834-D6226-K009
960 B25834-D6336-K004
1500 B25834-D6476-K004
1900 B25834-D6686-K004
180 24.0
260 17.0
220 29.0
320 21.0
460 16.0
750 12.0
1100 9.8
390 18.0
580 14.0
820 9.0
1200 7.3
1750 6.1
2600 2.8 100 79.2 × 104
2600 2.7 100 79.2 × 104
3900 2.2 110 89.3 × 104
3900 2.1 110 89.3 × 104
5800 1.8 180 64.2 × 248
8200 1.6 180 79.2 × 248
130
180
300
450
150
230
330
480
700
1100
1100
1500
1500
2300
3300
10
15
15
22
22
33
47
68
18
60
60
80
64
80
80
80
4800 12000 1.4 180 89.3 × 248
ˆ
v = 1400 V
VTT = AC 1400 V, 10 s
VTC = AC 3000 V, 10 s
VR = AC 1100 V
vs = 1900 V
4.7
6.8
10
15
22
33
18
18
60
80
80
80
380
940 17.0 140 40.0 × 156
3
3
1
1
1
1
240 B25834-L7475-K009
370 B25834-L7685-K009
680 B25834-D7106-K004
1000 B25834-D7156-K004
1300 B25834-D7226-K004
1600 B25834-D7336-K004
540 1400 13.0 140 50.0 × 156
800 2000
1200 3000
1800 4400
2600 6600
6.3 150 64.2 × 176
4.9 150 79.2 × 176
3.7 150 89.3 × 176
2.8 150 99.3 × 176
1) Other capacitance values upon request
Please read Cautions and warnings and
Important notes at the end of this document.
5
09/05
MKV AC Capacitors
B25834
Damping, Commutating
Characteristics and ordering codes
1)
CR
Imax
A
î
Is
A
RS
20 °C
Lself Dimensions Fig. Appr. Ordering code
d × l
weight
μF
A
mΩ
nH mm
g
ˆ
v = 1800 V
vs = 2400 V
VTT = AC 1800 V, 10 s
VTC = AC 3600 V, 10 s
VR = AC 1400 V
4.7
6.8
10
15
22
60
60
80
80
80
470 1200
680 1700
1000 2500
1500 3800
2200 5500
9.3 150 64.2 × 176
6.6 150 64.2 × 176
5.2 150 79.2 × 176
3.8 150 89.3 × 176
2.9 150 99.3 × 176
1
1
1
1
1
680 B25834-D0475-K004
680 B25834-D0685-K004
1000 B25834-D0106-K004
1300 B25834-D0156-K004
1600 B25834-D0226-K004
ˆ
v = 2100 V
VTT = AC 2100 V, 10 s
VTC = AC 4000 V, 10 s
VR = AC 1700 V
vs = 2900 V
4.7
6.8
10
15
22
60
60
80
80
80
560 1400 13.0 220 64.2 × 248
1
1
1
1
1
960 B25834-D1475-K004
960 B25834-D1685-K004
1500 B25834-D1106-K004
1900 B25834-D1156-K004
2300 B25834-D1226-K004
820 2000
1200 3000
1800 4500
2600 6600
9.0 220 64.2 × 248
7.0 220 79.2 × 248
5.3 220 89.3 × 248
3.9 220 99.3 × 248
ˆ
v = 2600 V
VTT = AC 2600 V, 10 s
VTC = AC 4800 V, 10 s
VR = AC 2100 V
vs = 3600 V
3.3
4.7
6.8
10
15
60
60
80
80
80
530 1300 13.0 220 64.2 × 248
1
1
1
1
1
960 B25834-D2335-K004
960 B25834-D2475-K004
1500 B25834-D2685-K004
1900 B25834-D2106-K004
2300 B25834-D2156-K004
750 1900
1100 2700
1600 4000
2400 6000
9.4 220 64.2 × 248
7.4 220 79.2 × 248
5.4 220 89.3 × 248
4.1 220 99.3 × 248
1) Other capacitance values upon request
Please read Cautions and warnings and
Important notes at the end of this document.
6
09/05
MKV AC Capacitors
B25834
Damping, Commutating
Dimensional drawing 1
Dimensional drawing 2
Screw terminals M10 (Dimensions in mm)
Screw terminals M10 (Dimensions in mm)
M10
M10
Hex nut
M10 ISO 4035
Hex nut
M10 ISO 4035
Washer
10,5 DIN 433
Washer
10,5 DIN 433
ød1
ød1
M12
M12
13 min.
13 min.
35
35
KLK1412-X
KLK1413-6
1) Dimensions for guidance only, subject for modification
d –1,2 l –4
∅ d1 –0,4 l1
Creepage Clear-
distance ance
d –1,2 l –4
∅ d1 –0,4 l1
Creepage Clear-
distance ance
min
min
64.2
64.2
104 60.2
248 60.2
135
204
64.2
64.2
176 60.2
248 60.2
135
204
79.2
79.2
104 75.2
248 75.2
75
204
79.2
79.2
176 75.2
248 75.2
135
204
10
10
20
13
89.3
89.3
104 85.2
248 85.2
75
204
89.3
89.3
176 85.2
248 85.2
135
204
99.3
99.3
104 95.2
248 95.2
75
204
99.3
99.3
176 95.2
248 95.2
135
204
Max. torque terminals*)
7 Nm
Max. torque terminals*)
7 Nm
*) Theterminaltorquemustnotactupontheceramic. Sotheleadshouldbelockedbetweentwonuts..
Mounting parts (included in delivery)
Threaded bolt
M12
Max. torque
10 Nm
Toothed washer
J 12,5 DIN 6797
Hex nut
M12 DIN 439
Please read Cautions and warnings and
Important notes at the end of this document.
7
09/05
MKV AC Capacitors
B25834
Damping, Commutating
Dimensional drawing 3
Dimensional drawing 4
Dual tab connectors 6.3 mm
Dual tab connectors 9.5 mm
6,3 0,1
8+0,5
Tab connector
A 9,5 x 1,2
DIN 46 244
15,5 min.
ød 1
M12
KLK1297-E
35 2
KLK1294-P
Dimensions in mm
Dimensions in mm
+0,5
+1
–2
d
l
l1+1*) Creepage Clearance
distance
d –1,2 l –4 ∅ d1–0,4 Creepage Clear-
–0,2
distance
ance
40
40
86
156
8
8
79.2
89.3
104 75.2
104 85.2
10
10
50
50
86 12
156 12
10
6
60
86 12
*) 8 mm = threaded bolt M8
12 mm = threaded bolt M12
Mounting parts (included in delivery)
Toothed washer
J 8.2 DIN 6797
J 12.5 DIN 6797
Hex nut
M 8 ISO 4035
M12 ISO 4035
Please read Cautions and warnings and
Important notes at the end of this document.
8
09/05
MKV AC Capacitors
B25834
Damping, Commutating
Dimensional drawing 5
Dimensional drawing 6
Tab connectors 6.3 mm
Tab connectors 6.3 mm
Tab connector
A 6,3 x 0,8
DIN 46 244
Tab connector
A 6,3 x 0,8
DIN 46 244
M8
M8
KLK1415-M
KLK1416-V
Dimensions in mm
Dimensions in mm
+0,5
+0,5
d
l ± 2
Creepage
distance
Clearance
7
d
l ± 2
Creepage
distance
Clearance
7
–0,2
–0,2
25
48
9
30
30
48
80
9
Mounting parts (included in delivery)
Threaded bolt
M8
Max. torque
4 Nm
Toothed washer
J 8.2 DIN 6797
Hex nut
M 8 DIN 439
Please read Cautions and warnings and
Important notes at the end of this document.
9
09/05
MKV AC Capacitors
B25834
Damping, Commutating
Dimensional drawing 7
Tab connectors 6,3 mm
Tab connector
A 6,3 x 0,8
DIN 46 244
M8
KLK1418-C
Dimensions in mm
+0,5
d
l ± 2
Creepage
distance
Clearance
6
–0,2
35
35
48
80
6
Mounting parts (included in delivery)
Threaded bolt
M8
Max. torque
4 Nm
Toothed washer
J 8,2 DIN 6797
Hex nut
M 8 DIN 439
Please read Cautions and warnings and
Important notes at the end of this document.
10 09/05
MKV AC Capacitors
B25834
Damping, Commutating
Cautions and warnings
Safety
■ In case of dents of more than 1 mm depth or any other mechanical damage, capacitors must not
be used at all. This applies also in cases of oil leakage.
■ Electrical or mechanical misapplication of capacitors may be hazardous. Personal injury or prop-
erty damage may result from bursting of the capacitor or from expulsion of oil or melted material
due to mechanical disruption of the capacitor.
■ Ensure good, effective grounding for capacitor enclosures.
■ Observe appropriate safety precautions during operation (self-recharging phenomena and the
high energy contained in capacitors).
■ Handle capacitors carefully, because they may still be charged even after disconnection.
■ The terminals of capacitors, connected bus bars and cables as well as other devices may also
be energized.
■ Follow good engineering practice.
■ Failure to follow cautions may result, worst case, in premature failures, bursting and fire.
Thermal load
After installation of the capacitor it is necessary to verify that maximum hot-spot temperature is not
exceeded at extreme service conditions (see www.epcos.com/thermal_design).
Mechanical protection
The capacitor has to be installed in a way that mechanical damages and dents in the aluminum can
are avoided.
Storage and Operating Conditions
Do not use or store capacitors in corrosive atmosphere especially where chloride gas, sulfide gas,
acid, alkali, salt or the like are present. In dusty environments, regular maintenance and cleaning
especially of the terminals is required to avoid conductive path between phases and/or phases and
ground.
Overpressure disconnector
To ensure full functionality of an overpressure disconnector, the following must be observed:
■ The elastic elements must not be hindered, i.e.
– connecting lines must be flexible leads (cables),
– there must be sufficient space (minimum 12 mm) above the connections for expansion of the
overpressure disconnector,
– folding crimps must not be retained by clamps.
■ Stress parameters of the capacitor must be within the IEC61071 specification.
Service life expectancy
Electrical components do not have an unlimited service life expectancy; this applies to self-healing
capacitors too. The maximum service life expectancy may vary depending on the application the
capacitor is used in.
11 09/05
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical require-
ments that are often placed on our products in the areas of application concerned. We neverthe-
less expressly point out that such statements cannot be regarded as binding statements
about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with
them than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic components
or failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications re-
quiring a very high level of operational safety and especially in customer applications in which the
malfunction or failure of a passive electronic component could endanger human life or health
(e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suit-
able design of the customer application or other action taken by the customer (e.g. installation of
protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this pub-
lication may contain substances subject to restrictions in certain jurisdictions (e.g. be-
cause they are classed as “hazardous”). Useful information on this will be found in our Material
Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed
questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequent-
ly, we cannot guarantee that all products named in this publication will always be available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SilverCap, SIFI, SIMID,
SIKOREL, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered or
pending in Europe and in other countries. Further information will be found on the Internet at
www.epcos.com/trademarks.
12 09/05
相关型号：
©2020 ICPDF网 联系我们和版权申明