SMT06C [EMERSON-NETWORKPOWER]
5 Vin and 12 Vin single output; 5 Vin和12输入电压单路输出
| 型号： | SMT06C |
| 厂家： | 
EMERSON NETWORK POWER |
| 描述： | 5 Vin and 12 Vin single output |
| 文件： | 总4页 (文件大小：298K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Embedded Power for
Business-Critical Continuity
Rev. 08.20.08_j93
SMT06C
1 of 4
SMT06C Series
5 Vin and 12 Vin
single output
Total Power:
20W
Input Voltage: 4.5-5.5 Vdc or
10.2 - 13.8 Vdc
# of Outputs: Single
Electrical Specifications
Output
Special Features
• 6 A current rating
• Input voltage range:
4.5 Vdc - 5.5 Vdc or
Voltage adjustability (see note 6) 5 V input models
12 Vins
0.9 - 3.3 Vdc
0.9 - 5.0 Vdc
2.5%
10.2 Vdc - 13.8 Vdc
Output setpoint accuracy
Line regulation
1.0% trim resistors
Low line to high line
Full load to min. load
• Output voltage range:
0.9 Vdc - 3.3/5.0 Vdc
• Industry leading value
• Cost optimized design
• Excellent transient response
• Output voltage adjustability
• Pathway for future
upgrades
0.2%
0.5%
Load regulation
Min/max load
0 A / 6 A
Overshoot (at turn on)
5 V input models
12 V input models
3.0% max.
1.0% max.
Undershoot
At turn-off
100 mV max.
• Supports silicon voltage
migration
• Resulting in reduced
design-in and qualification
time
Ripple and noise 5 Hz to 20 MHz (See note 2)
Transient response (see note 1)
See table on page 2
75 mV max. deviation
150 μs recovery to
within regulation band
• Designed in reliability:
MTBF of >7 million hours
per Telcordia SR-332
• Available RoHS compliant
• 2 year warranty
Safety
UL/cUL : CAN/CSA 22.2
No. 60950
TÜV Product Service
(EN60950:2000)
CB report and certificate
Embedded Power for
Business-Critical Continuity
Rev. 08.20.08_j93
SMT06C
2 of 4
All specifications are typical at nominal input, full load at 25°C unless otherwise stated.
Input
Input voltage range
5 V input model
12 V input model
4.5 - 5.5 Vdc
10.2 - 13.8 Vdc
Input current
Minimum load
Remote OFF
50 mA
5 mA
Input current (max.)
(see note 8)
5 V input model
12 V input model
5.1 A max. @ lo max.
1.6 A @ lo max.
Input reflected ripple
(see note 2)
5 Vin
12 Vin
52 mA (pk-pk)
56 mA (pk-pk)
Remote ON/OFF
Logic compatibility
Positive logic
>2.4 Vdc
<0.8 Vdc
ON
OFF
Start-up time (see note 3) Power up
Remote ON/OFF
<20 ms
<20 ms
Turn ON threshold
5 Vin
12 Vin
4.5 Vdc typ.
9.3 Vdc typ.
Turn OFF threshold
5 Vin
12 Vin
4.3 Vdc typ.
7.8 Vdc typ.
General Specifications
Efficiency
See table on page 2
Fixed
Switching frequency
200 kHz.
Approvals and standards (See note 4)
TÜV product Services
IEC69050, UL/cUL60950
Material flammability
UL94V-0
Weight
9.3 g (0.3 oz.)
150 µm
Coplanarity
MTBF
Telcordia SR-332
7,562,142 hours
Environmental Specifications
Thermal performance
(see note 9)
Operating ambient,
temperature
0 °C to +80 °C
Non-operating
-40 °C to +125 °C
Protection
Short-circuit
Hiccup, non-latching
Recommended system capacitance
Input capacitance
(See note 10)
(See note 10)
270 μF/20 mW ESR max.
680 μF/10 m W ESR max.
Output capacitance
Embedded Power for
Business-Critical Continuity
Rev. 08.20.08_j93
SMT06C
3 of 4
Ordering Information
Output
Power
(max)
Output
Current
(min)
Output
Current
(max)
Regulation
Input
Voltage
Output
Voltage (11)
Maximum
Load (typ)
Model Numbers (12, 13)
Line
Load
0.5%
0.5%
4.5-5.5 Vdc
0.9-3.3 V
0.2%
0.2%
20 W
30 W
0 A
0 A
6 A
6 A
89%
91%
SMT06C-05SADJJ
SMT06C-12SADJJ
10.2 - 13.8 Vdc 0.9-5.0 V
All specifications are typical at nominal input Vin = 12 V, full load at 25°C unless otherwise stated.
Part Number System with Options
Rated Output
Current
Performance
Input Voltage
Product Family
Number of Outputs
Packaging Options
SMT
06
C
12
SADJ
J
06 = 6 A
C = C Series
05 = 4.5 Vdc to 5.5 Vdc
12 = 10.2 Vdc to 13.8 Vdc
J = PB-free (RoHS 6/6 compliant)
SMT = Surface Mount
SADJ = Single Adjustable
Output
Output Voltage Adjustment of the SMT20C Series
The ultra-wide output voltage trim range offers major advantages to users who
select the SMT06C series. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can be
trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SMT06C series converter
leaves the factory the output has been adjusted to the default voltage of 0.9 V.
Notes
Ripple and Noise Specification
1
di/dt = 10 A/μs, Vin = Nom, Tc = 25 °C, load change = 0.50 lo max. to 0.75 lo
max. and 0.75 lo max. to 0.5 lo max.
Measured with external filter. See Application Note 169 for details.
Power up is the time from application of dc input to Power Good high.
Remote ON/OFF asserted high to Power Good high.
This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
Measured as per recommended set-up. Cin = 270 μF (20 mW ESR max.).
Cout = 680 μF (10 mW ESR max.).
Uses external resistor from trim to ground. Minimum value 485 W for 5 V
model, 280 W for 12 V model. See Application Note 169 for details.
Signal line assumed <3 m.
Output
Voltage
Model
Pk - Pk
RMS
2
3
5 V input models 0.9 Vdc to 2.5 Vdc
3.3 Vdc
30 mV
40 mV
15 mV
15 mV
4
5
6
12 V input models 0.9 Vdc to 2.5 Vdc
3.3 Vdc to 5 Vdc
40 mV
50 mV
20 mV
20 mV
7
8
9
External input fusing recommended.
See Application Note 169 for operation above 50 ºC.
10 See Application Note 169 for more details.
11 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special
request, please contact your local sales representative for details.
12 NOTICE: Some models do not support all options. Please contact your local
representative or use the on-line model number search tool at
www.powerconversion.com to find a suitable alternative.
Embedded Power for
Business-Critical Continuity
Rev. 08.20.08_j93
Americas
SMT06C
4 of 4
Mechanical Drawing
5810 Van Allen Way
Carlsbad, CA 92008
USA
0.190
(4.83)
Telephone: +1 (760) 930 4600
Facsimile: +1 (760) 930 0698
0.190
(4.83)
1.200
0.190
(4.83)
(30.48)
0.310
(7.87)
Europe (UK)
Waterfront Business Park
Merry Hill, Dudley
0.190
(4.83)
PIN 5
PIN 2
West Midlands, DY5 1LX
United Kingdom
Telephone: +44 (0) 1384 842 211
Facsimile: +44 (0) 1384 843 355
Asia (HK)
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
PIN 1
0.75
(1.90)
PIN 6
0.050
(1.27)
Telephone: +852 2176 3333
Facsimile: +852 2176 3888
Seating Plane
For global contact, visit:
0.062
(1.57) REF
www.powerconversion.com
technicalsupport@
powerconversion.com
0.019
(0.48) TYP
6 x
0.089
(2.26)
All dimensions in inches (mm)
All tolerance 0.010in (0.25mm)
unless otherwise stated
While every precaution has been taken to ensure
accuracy and completeness in this literature, Emerson
Network Power assumes no responsibility, and disclaims
all liability for damages resulting from use of this
information or for any errors or omissions.
Pin connections
Pin Number Function
1
2
3
4
5
Remote ON/OFF
Emerson Network Power.
The global leader in enabling
business-critical continuity.
Power Good
Trim
Vout
GND
AC Power
Connectivity
6
Vin
DC Power
Embedded Computing
Embedded Power
Monitoring
Outside Plant
Power Switching & Controls
Precision Cooling
Racks & Integrated Cabinets
Services
Surge Protection
EmersonNetworkPower. com
Emerson Network Power and the Emerson
Network Power logo are trademarks and
service marks of Emerson Electric Co.
©2008 Emerson Electric Co.
相关型号：
©2020 ICPDF网 联系我们和版权申明