3000TE-NNSP-L [EMCORE]
Long Range L-Band Transport; 长距离L波段传输
| 型号： | 3000TE-NNSP-L |
| 厂家： | 
EMCORE CORPORATION |
| 描述： | Long Range L-Band Transport |
| 文件： | 总4页 (文件大小：1051K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CATV
orce
F
Model 2804
Optical Broadcast Systems
• Request Pricing
• Download User Manual
CATV Transmitter
Transmits up to 110 channels over
one single-mode fiber.
VSB/AM transmission ensures
compatibility with standard CATV
modulators, processors, etc.
The transmitter includes a 7-segment LED and
other indicator LEDs that allow critical system
parameters to be accurately monitored.
Model 2804 Transmitter
An integral -20 dB RF test point simplifies
installation, commissioning, and troubleshooting.
Key lock power switch prevents accidental
power-down.
Multiple laser output power
options provide complete system
design flexibility.
Excellent for medium to large campus video
distribution systems.
The Force CATV Model 2804 110 Channel CATV Professional Distribution System (PDS) transmitter is part of a robust system
for transferring up to 110 channels of VSB/AM modulated signals over a single-mode optical fiber. The system is also suitable
for transferring 80 CATV channels along with 30 digital QAM channels in the upper frequency range. The Model 2804 provides
40-870 MHz of usable bandwidth for video signals stacked at 6 MHz intervals. A low loss single-mode fiber allows full channel
loading to beyond 20 km while maintaining a good carrier-to-noise ratio. A key power lock ensures the transmitter cannot be
accidentally turned off, and a blue 7-segment LED readout allows the user to monitor a number of system parameters. A -20
dB RF test point on the front panel provides a convenient avenue for installing, commissioning, and troubleshooting the
transmitter. The Model 2804 may be used with the Model 2807 mini-node receiver for use in return path and multiple splitter
applications or with the Model 2808 receiver for basic 110 channel CATV transmission. In all cases, the link provides excellent
performanceformanydemandingapplicationssuchasbroadbandLANs, distancelearning, andmultipledataservices.
Model 2807
CATV VSB/AM
CATVLinx® Rx
Video Out
Head End
Model 2807
CATV VSB/AM
CATVLinx® Rx
Video Out
110 CATV VSB/AM
Video In
Model 2804
CATVLinx® Tx
Model 2807
CATVLinx® Rx
w/ Return
Path
Model 2802
CATVLinx® Rx
To Internet
or VOD
Return Path
Service
825 Park Street, Christiansburg, VA 24073 • USA (800) 732-5252 • TEL (540) 382-0462 • FAX (540) 381-0392 •csr-sales@forceinc.com • www.forceinc.com
© 2005 by Force, Incorporated. Force, Incorporated reserves the right to make changes to the product described in this document in the interest of product improvement. All rights reserved.
SpecificationsandOrderingInformation
Optical Characteristics*
Electrical, Environmental, and Physical Characteristics*
Min
Channel Loading
Bandwidth (110 Ch)
Typ
40
Max Units
110
870 MHz
Min
Typ
120
50
25
1.25
Max Units
Power Supply Voltage
Power Supply Frequency
Power Dissipation
Fuse Rating (Slow Blow)
Operating Temp. Range
Storage Temp Range
Humidity
240
60
VAC
Hz
Operating Wavelength
1290 1310 1330nm
MHz
Watts
Required Fiber Bandwidth
Input/Output Impedance
Side Mode Suppression Ratio
Back Reflection Tolerance
CSO
2,000
30
A
75
Ohms
dB
0
-20
0
+45
+70
%
°C
°C
-50 dB
dB
90
5.5
2.5
-65
-69
Weight
lbs.
kg
CTB
dB
Dimensions
19 x 1.72 x 14.1
483 x 44 x 358
in.
mm
45
40
35
30
25
20
0
10 20 30 40 50 60 70 80 90 100 110
Total Number of Input Channels
Model 2804 Transmitter Front and Rear Views
110 Channel SM 1310 nm Transmitter P/N*
Tx Options
+6 dBm Opt. Output
2804TH-SCSP/06
+8 dBm Opt. Output
2804TH-SCSP/08
+10 dBm Opt. Output
2804TJ-SCSP/10
+12 dBm Opt. Output
2804TK-SCSP/12
+13 dBm Opt. Output
2804TL-SCSP/13
Tx, 1RU, SM, 1310 nm
*System performance specifications indicated for use with 9/125 µm single-mode fiber.
FC/APC optical connectors and other optical output powers are available for the transmitter. Please see IOM2804 for complete transmitter part numbers.
The PDS transmitter is designed to operate with the Model 2807 and/or Model 2808 CATV receivers. See IOM2807 and IOM2808 for complete details.
825 Park Street, Christiansburg, VA 24073
USA (800) 732-5252 • TEL (540) 382-0462 • FAX (540) 381-0392
csr-sales@forceinc.com • www.forceinc.com
orce
F
Optical Broadcast Systems
Rev. 1.3 01/17/05
© 2005 by Force, Incorporated. Force, Incorporated reserves the right to make changes to the product described in this document in the interest of product improvement. All rights reserved.
CATV
orce
F
Model 2805
Optical Broadcast Systems
• Request Pricing
• Download User Manual
CATV Transmitter
Transmits up to 110 channels over
one single-mode fiber.
VSB/AM transmission ensures
compatibility with standard CATV
modulators, processors, etc.
The transmitter includes status indicator
LEDs that provide easy assessment of
the link's performance.
Excellent for structured in-building premise
wiring video distribution.
Model 2805 Transmitter
High capacity backbone transport for multiple
data services (RS-232, T1/E1, Ethernet, etc.)
via CATV RF modem.
CATV HFC distribution network, distance
learning, CCTV video surveillance, campus
video distribution, teleconferencing, and more.
The Force CATVLinx® Model 2805 110 Channel CATV Private Network Solution (PNS) transmitter is part
of a robust system for transferring up to 110 channels of VSB/AM modulated signals over a single-mode
optical fiber. The system provides 40-870 MHz of usable bandwidth for video signals stacked at 6 MHz
intervals. A low loss single-mode optical fiber allows full channel loading to beyond 20 km while
maintaining a good carrier-to-noise ratio. The Model 2805 may be used with the Model 2807 mini-
node receiver for use in return path and multiple splitter applications or with the Model 2808 receiver for
basic 110 channel CATV transmission. In all cases, the link provides excellent performance for many
demandingapplicationssuchasbroadbandLANs, distancelearning, andmultipledataservices.
Model 2808
RF
Amplifier
CATVLinx® Rx
Video Server
Local
Cable
Provider
Model 2808
RF
Amplifier
CATVLinx® Rx
Modulator
Modulator
RF
Combiner
Model 2805
CATVLinx® Tx
Model 2808
RF
Amplifier
CATVLinx® Rx
Head End
Model 2808
RF
Amplifier
CATVLinx® Rx
825 Park Street, Christiansburg, VA 24073 • USA (800) 732-5252 • TEL (540) 382-0462 • FAX (540) 381-0392 •csr-sales@forceinc.com • www.forceinc.com
© 2005 by Force, Incorporated. Force, Incorporated reserves the right to make changes to the product described in this document in the interest of product improvement. All rights reserved.
SpecificationsandOrderingInformation
Optical Characteristics*
Electrical, Environmental, and Physical Characteristics*
Min
Typ
Max Units
110
870 MHz
Min
120
50
Typ
Max Units
Channel Loading
Power Supply Voltage
Power Supply Frequency
Power Dissipation
Fuse (Slow Blow)
Operating Temp. Range
Storage Temp. Range
Humidity
240
60
VAC
Hz
Bandwidth (77 Ch)
Operating Wavelength
Required Fiber Bandwidth
Input/Output Impedance
Side Mode Suppression Ratio
Backreflection Tolerance
CSO
40
1290 1310 1330 nm
20
1.25
Watts
A
2,000
30
MHz
Ohms
dB
75
0
-20
0
+45
+70
90
°C
°C
%
-50
dB
-60
-65
dB
dB
Weight
5.5
2.5
lbs.
kg
CTB
Dimensions
19 x 1.72 x 12.1
483 x 43.7 x 307
in.
mm
64
5 Ch.
62
60
58
56
54
52
50
48
46
44
42
40
38
36
10 Ch.
24 Ch.
40 Ch.
77 Ch.
-12 -11 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1
0
1
2
3
4
Receiver Optical Input (dBm)
Model 2805 Private Network Solution
(PNS) Transmitter
Front and Rear Views
110 Channel SM 1310 nm Transmitter P/N
Tx Options
+8 dBm Opt. Output
2805TD-SCSP/08
+10 dBm Opt. Output
2805TE-SCSP/10
+12 dBm Opt. Output
2805Tf-SCSP/12
+13 dBm Opt. Output
2805TG-SCSP/13
Tx, 1RU, SM, 1310 nm
*System performance specifications indicated for use with 9/125 µm single-mode fiber.
FC/APC optical connectors and other optical output powers are available for the transmitter. Please see IOM2805 for complete transmitter part numbers.
The PNS transmitter is designed to operate with the Model 2807 and/or Model 2808 CATV receivers. See IOM2807 and IOM2808 for complete details.
825 Park Street, Christiansburg, VA 24073
USA (800) 732-5252 • TEL (540) 382-0462 • FAX (540) 381-0392
csr-sales@forceinc.com • www.forceinc.com
orce
F
Rev. 1.3 01/17/05
Optical Broadcast Systems
© 2005 by Force, Incorporated. Force, Incorporated reserves the right to make changes to the product described in this document in the interest of product improvement. All rights reserved.
相关型号：
©2020 ICPDF网 联系我们和版权申明