E910.01 [ELMOS]
Low side driver (8 channel, serial interface); 低侧驱动器(8信道,串行接口)型号: | E910.01 |
厂家: | ELMOS SEMICONDUCTOR AG |
描述: | Low side driver (8 channel, serial interface) |
文件: | 总1页 (文件大小:123K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
BUS IC
DC/DC CONVERTER
MOTOR DRIVER IC
RIPPLE COUNTER
DRIVER IC
I/O IC
SENSOR IC
SENSOR INTERFACE IC
ÿ Low side driver 8x, serial
Low side driver 8x, parallel
LCD controller
ÿ Low side driver (8 channel, serial interface)
E910.01
FEATURES
APPLICATION
PINNING
PACKAGE
ÿ
ÿ
ÿ
ÿ
ÿ
ÿ
Supply voltage range VDD 4.5V to 5.5V
Driver for:
Pin Name
Description
Ground
Connect to ground
Low standby current (typical < 1µA)
Serial structure for direct µC interfacing
Cascadable
Output status detection
TTL - compatible input levels with threshold
hysteresis
ÿ
ÿ
ÿ
Relays
Lamps / LEDs
DC and stepper motors
1
GND
TEST
OUT3
OUT2
OUT1
OUT0
CE
GND
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
13
12
11
GND
NC
TEST
OUT3
OUT2
OUT1
OUT0
CE
SCLK
SI
GND
2
3
4
5
6
7
OUT4
OUT5
OUT6
OUT7
RESET
VDD
SO
Open - drain low - side driver
Open - drain low - side driver
Open - drain low - side driver
Open - drain low - side driver
Open - drain low - side driver
Chip enable - active low (output data is read
back on the falling edge of the pulse and only
after 8x n falling edges on SCLK is the output
data clocked on the next rising edge)
DESCRIPTION
The IC is developed for automotive applications and can also
be used in several other application areas. The IC is well suited
to drive relays, lamps, bus systems etc. with medium power
consumption.
ÿ
ÿ
8 high current outputs
GND
(R
ON
typ. 1.5 Ý / Imax=350mA)
Wide output operating voltage range
(5.5 to 25.5V)
8
SCLK
ÿ
ÿ
ÿ
ÿ
ÿ
Output open- and short - circuit detection
Individual output short - circuit protection
Thermal overload protection
–40°C to +125°C operating temperature
SO20w package
The device provides a serial data bus for comunication with a µC
and 8 identical power drivers. All outputs are short circuit pro-
tected. A thermal shut-off protects the device against thermal
overload. Readback capability enables fault detection as well as
simple switch monitoring.
9
10
11
SI
Serial clock input
Serial data input
Ground
GND
GND
SO
VDD
RESET
OUT7
OUT6
OUT5
OUT4
NC
12
13
14
15
16
17
18
19
20
Ground
Serial data output (high impendence when CE = High)
Supply voltage
External reset - active low (= internal power on reset)
Open - drain low - side driver
Open - drain low - side driver
Open - drain low - side driver
Not connected
GND
Ground
BLOCK DIAGRAM
VDD
VDD
8
8
Reset
control
Logic
8
µC
OUT 0...7
OVLD
Prot.
CE
SCLK
SI
Interface
SO
Note ELMOS Semiconductor AG (below ELMOS) reserves the right to make changes to the product contained in this publication without notice. ELMOS assumes no responsibility for the use of any
circuits described herein, conveys no licence under any patent or other right, and makes no representation that the circuits are free of patent infringement. While the information in this publication
has been checked, no responsibility, however, is assumed for inaccuracies. ELMOS does not recommend the use of any of its products in life support applications where the failure or malfunction of
the product can reasonably be expected to cause failure of a life-support system or to significantly affect its safety or effectiveness. Products are not authorized for use in such applications.
Copyright © 2005 ELMOS Reproduction, in part or whole, without the prior written consent of ELMOS, is prohibited.
56
www.elmos.de | sales@elmos.de
elmos product catalog june 2005
57
相关型号:
©2020 ICPDF网 联系我们和版权申明