EQUD13E1H5-20.480MTR [ECLIPTEK]
TCVCXO, CLIPPED SINE OUTPUT;型号: | EQUD13E1H5-20.480MTR |
厂家: | Ecliptek |
描述: | TCVCXO, CLIPPED SINE OUTPUT 机械 输出元件 石英晶振 压控振荡器 有源晶体振荡电路 |
文件: | 总11页 (文件大小:881K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Ecliptek | EQUD13 Series Oscillator
http://www.ecliptek.com/oscillators/EQUD13/
Log On | 714-433-1200 | Email Customer Support
Home
Products
Quick Quote
My Parts List
Site Map
Contact Us
EQUD13 Series Oscillator
Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 3.3Vdc 4 Pad 5.0mm
x 7.0mm Ceramic Surface Mount (SMD)
2011/65 +
168 SVHC
2015/863
Revision B 03/20/2015
ectrical Specifications
Nominal Frequency
10.000MHz to 40.000MHz
Some frequencies within this range may not be available.
requency Stability
Inclusive of Operating Temperature Range, at Vdd=3.3Vdc and
Vc=1.5Vdc
±3.0ppm Maximum
±2.5ppm Maximum
±2.0ppm Maximum
±1.5ppm Maximum
±1.0ppm Maximum
±0.5ppm Maximum
requency Stability vs. Frequency
olerance
±1.0ppm Maximum (at 25°C ±2°C, at Vdd=3.3Vdc, and Vc=1.5Vdc,
Pre-Reflow)
requency Stability vs. Input Voltage
requency Stability vs. Load
±0.2ppm Maximum (±5%)
±0.2ppm Maximum (±1kOhm//±1pF)
±1ppm Maximum (at 25°C, 24 hours after reflow, 1 time)
±1ppm/Year Maximum (at 25°C)
requency Stability vs. Reflow
requency Stability vs. Aging
Operating Temperature Range
0°C to +50°C
-10°C to +60°C
0°C to +70°C
-20°C to +70°C
-30°C to +60°C
-30°C to +75°C
-30°C to +85°C
-40°C to +85°C
upply Voltage
nput Current
3.3Vdc ±5%
2.0mA Maximum over Nominal Frequency of 10MHz to 26MHz
2.5mA Maximum over Nominal Frequency of 26.000001MHz to 40MHz
Output Voltage
External DC-Cut capacitor required, 1000pF recommended
0.8Vp-p Clipped Sinewave Minimum
oad Drive Capability
Output Logic Type
ontrol Voltage
10kOhms//10pF
Clipped Sinewave
1.5Vdc ±1.0Vdc
requency Deviation
inearity
±5ppm Minimum
10% Maximum
ransfer Function
Modulation Bandwidth
Positive Transfer Characteristic
10kHz Minimum at -3dB
1 of 11
28-Jan-2016 2:38 PM
Ecliptek | EQUD13 Series Oscillator
http://www.ecliptek.com/oscillators/EQUD13/
nput Impedance
hase Noise
500kohm Minimum
All Values are Typical
-80dBc/Hz at 10Hz Offset
-115dBc/Hz at 100Hz Offset
-135dBc/Hz at 1kHz Offset
-138dBc/Hz at 10kHz Offset
MS Phase Jitter
Fj=12kHz to 20MHz (Random)
0.7pSec Typical, 1pSec Maximum
tart Up Time
5mSec Maximum
-40°C to +85°C
torage Temperature Range
2 of 11
28-Jan-2016 2:38 PM
Ecliptek | EQUD13 Series Oscillator
http://www.ecliptek.com/oscillators/EQUD13/
echanical Dimensions
Dimensions in Millimeters
1: Control Voltage
2: Case/Ground
3: Output
4: Supply Voltage
arking Specifications
e 1:
EXXXXXX
E = Ecliptek Designator
XXXXXX = Nominal Frequency in MHz (5 digits + Decimal)
e 2:
XXXXX
XXXXX = Ecliptek Manufacturing Identifier
3 of 11
28-Jan-2016 2:38 PM
Ecliptek | EQUD13 Series Oscillator
http://www.ecliptek.com/oscillators/EQUD13/
vironmental and Mechanical Specifications
D Susceptibility
e Leak Test
MIL-STD-883, Method 3015, Class 1, HBM: 1500V
MIL-STD-883, Method 1014, Condition A
UL94-V0
mmability
oss Leak Test
MIL-STD-883, Method 1014, Condition C
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 1004
chanical Shock
isture Resistance
isture Sensitivity
sistance to Soldering Heat
sistance to Solvents
lderability
J-STD-020, MSL 1
MIL-STD-202, Method 210, Condition K
MIL-STD-202, Method 215
MIL-STD-883, Method 2003
mperature Cycling
bration
MIL-STD-883, Method 1010, Condition B
MIL-STD-883, Method 2007, Condition A
42°C/W (degrees Celsius per Watt)
ermal Resistance (θ
ermal Resistance (θ
)
)
JA
JC
15°C/W (degrees Celsius per Watt)
4 of 11
28-Jan-2016 2:38 PM
Ecliptek | EQUD13 Series Oscillator
http://www.ecliptek.com/oscillators/EQUD13/
pe & Reel Dimensions
00 pieces per reel
mpliant to EIA-481
Dimensions in Millimeters
5 of 11
28-Jan-2016 2:38 PM
Ecliptek | EQUD13 Series Oscillator
http://www.ecliptek.com/oscillators/EQUD13/
st Circuit for Clipped Sinewave Output
te 1: An external 0.01µF bypass capacitor in parallel with a 0.1µF high frequency ceramic bypass capacitor close (less
n 2mm) to the package ground and supply voltage pin is required.
te 2: A low input capacitance (<12pF), 10X attentuation factor, high impedance (>10Mohms), and high bandwidth
300MHz) passive probe is recommended.
te 3: Capacitance value C includes sum of all probe and fixture capacitance.
L
6 of 11
28-Jan-2016 2:38 PM
Ecliptek | EQUD13 Series Oscillator
http://www.ecliptek.com/oscillators/EQUD13/
commended Solder Pad Dimensions
erances = ±0.1
Dimensions in Millimeters
7 of 11
28-Jan-2016 2:38 PM
Ecliptek | EQUD13 Series Oscillator
http://www.ecliptek.com/oscillators/EQUD13/
lder Reflow Profile
8 of 11
28-Jan-2016 2:38 PM
Ecliptek | EQUD13 Series Oscillator
http://www.ecliptek.com/oscillators/EQUD13/
h Temperature Infrared/Convection
te: Temperatures shown are applied to body of
vice.
MAX to T (Ramp-up Rate)
3°C/Second Maximum
L
eheat
Temperature Minimum (T MIN)
150°C
S
Temperature Typical (T TYP)
175°C
S
Temperature Maximum (T MAX)
200°C
S
Time (t )
60 - 180 Seconds
3°C/Second Maximum
S
mp-up Rate (T to T )
L
P
me Maintained Above:
Temperature (T )
217°C
L
Time (t )
60 - 150 Seconds
L
ak Temperature (T )
260°C Maximum for 10 Seconds Maximum
250°C +0/-5°C
P
rget Peak Temperature (T Target)
P
me within 5°C of actual peak (t )
P
20 - 40 Seconds
mp-down Rate
6°C/Second Maximum
8 Minutes Maximum
Level 1
me 25°C to Peak Temperature (t)
oisture Sensitivity Level
9 of 11
28-Jan-2016 2:38 PM
Ecliptek | EQUD13 Series Oscillator
http://www.ecliptek.com/oscillators/EQUD13/
w Temperature Infrared/Convection 240°C
te: Temperatures shown are applied to body of
vice.
MAX to T (Ramp-up Rate)
5°C/Second Maximum
L
eheat
Temperature Minimum (T MIN)
N/A
S
Temperature Typical (T TYP)
150°C
S
Temperature Maximum (T MAX)
N/A
S
Time (t )
60 - 120 Seconds
5°C/Second Maximum
S
mp-up Rate (T to T )
L
P
me Maintained Above:
Temperature (T )
150°C
L
Time (t )
200 Seconds Maximum
L
ak Temperature (T )
240°C Maximum
P
rget Peak Temperature (T Target)
240°C Maximum 2 Times / 230°C Maximum 1 Time
10 Seconds Maximum 2 Times / 80 Seconds Maximum 1 Time
P
me within 5°C of actual peak (t )
P
mp-down Rate
5°C/Second Maximum
me 25°C to Peak Temperature (t)
oisture Sensitivity Level
N/A
Level 1
h Temperature Manual Soldering
te: Temperatures shown are applied to body of device.
0°C Maximum for 5 Seconds Maximum, 2 times Maximum.
w Temperature Manual Soldering
te: Temperatures shown are applied to body of device.
5°C Maximum for 10 Seconds Maximum, 2 times Maximum.
10 of 11
28-Jan-2016 2:38 PM
Ecliptek | EQUD13 Series Oscillator
http://www.ecliptek.com/oscillators/EQUD13/
- Build A Part Number
2 - Next Page
Select the parameters that meet your requirements and then click
Access these Part Number specific
resources and tools
Next
Frequency in Megahertz (10 to 40):
Some frequencies within this range may not be
available
Operating Temperature Range:
Frequency Stability:
Packaging Options:
rt Numbering Guide
TOOLS
PRODUCT
ECLIPTEK
TERMS
Quick Quote
Crystals
Authorized Distributors
Contact
Privacy Policy
Terms of Sale
Legal
SmartSearch
Oscillators
Compliance Documents
Chipset Cross Reference
Competitor Cross Reference
Part Search
REACH Resources
RoHS Resources
End of Life
About
News
Our Quality
ISO9001
Feedback
11 of 11
28-Jan-2016 2:38 PM
相关型号:
EQUD13E4E5-10.245M
Clipped, Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 3.3Vdc 4 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD) Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 3.3Vdc 4 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD)
ECLIPTEK
EQUD13E4E5-12.288M
Clipped, Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 3.3Vdc 4 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD) Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 3.3Vdc 4 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD)
ECLIPTEK
EQUD13E4K5-20.480M
Clipped, Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 3.3Vdc 4 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD) Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 3.3Vdc 4 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD)
ECLIPTEK
EQUD13E7G5-12.288M
Clipped, Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 3.3Vdc 4 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD) Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 3.3Vdc 4 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD)
ECLIPTEK
EQUD13E8G5-16.367667M
Clipped, Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 3.3Vdc 4 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD) Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 3.3Vdc 4 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD)
ECLIPTEK
EQUD15E2G5-12.288M
Clipped, Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 3.0Vdc 4 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD) Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 3.0Vdc 4 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD)
ECLIPTEK
©2020 ICPDF网 联系我们和版权申明