EMK21G2H-53.8112MTR [ECLIPTEK]

CRYSTAL OSCILLATOR, CLOCK, 53.8112MHz, LVCMOS OUTPUT, ROHS COMPLIANT, SMD, 4 PIN;
EMK21G2H-53.8112MTR
型号: EMK21G2H-53.8112MTR
厂家: Ecliptek    Ecliptek
描述:

CRYSTAL OSCILLATOR, CLOCK, 53.8112MHz, LVCMOS OUTPUT, ROHS COMPLIANT, SMD, 4 PIN

机械 输出元件 振荡器
文件: 总6页 (文件大小:197K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
RoHS  
Pb  
EMK21G2H-53.8112M TR  
EMK21 G 2 H -53.8112M TR  
Series  
Packaging Options  
RoHS Compliant (Pb-free) 4 Pad 3.2mm x 5mm SMD  
1.8Vdc LVCMOS MEMS Oscillator  
Tape & Reel  
Nominal Frequency  
Frequency Tolerance/Stability  
±100ppm Maximum over -40°C to +85°C  
53.8112MHz  
Output Control Function  
Tri-State (Disabled Output: High Impedance)  
Duty Cycle  
50 ±5(%)  
ELECTRICAL SPECIFICATIONS  
Nominal Frequency  
53.8112MHz  
Frequency Tolerance/Stability  
±100ppm Maximum over -40°C to +85°C (Inclusive of all conditions: Calibration Tolerance at 25°C,  
Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change,  
First Year Aging at 25°C, 260°C Reflow, Shock, and Vibration)  
Aging at 25°C  
±1ppm Maximum First Year  
Operating Temperature Range  
Supply Voltage  
-40°C to +85°C  
1.8Vdc ±5%  
Input Current  
18mA Maximum  
Output Voltage Logic High (Voh)  
Output Voltage Logic Low (Vol)  
Rise/Fall Time  
90% of Vdd Minimum (IOH=-8mA)  
10% of Vdd Maximum (IOL=+8mA)  
2nSec Maximum (Measured from 20% to 80% of waveform)  
50 ±5(%) (Measured at 50% of waveform)  
15pF Maximum  
Duty Cycle  
Load Drive Capability  
Output Logic Type  
CMOS  
Output Control Function  
Output Control Input Voltage  
Peak to Peak Jitter (tPK)  
Start Up Time  
Tri-State (Disabled Output: High Impedance)  
+0.7Vdd Minimum or No Connect to Enable Output, +0.3Vdd Maximum to Disable Output  
250pSec Maximum, 100pSec Typical  
50mSec Maximum  
Storage Temperature Range  
-55°C to +125°C  
ENVIRONMENTAL & MECHANICAL SPECIFICATIONS  
ESD Susceptibility  
MIL-STD-883, Method 3015, Class 2, HBM 2000V  
Flammability  
UL94-V0  
Mechanical Shock  
Moisture Resistance  
Moisture Sensitivity Level  
Resistance to Soldering Heat  
Resistance to Solvents  
Solderability  
MIL-STD-883, Method 2002, Condition G, 30,000G  
MIL-STD-883, Method 1004  
J-STD-020, MSL 1  
MIL-STD-202, Method 210, Condition K  
MIL-STD-202, Method 215  
MIL-STD-883, Method 2003 (Pads on bottom of package only)  
MIL-STD-883, Method 1010, Condition B  
MIL-STD-883, Method 1011, Condition B  
MIL-STD-883, Method 2007, Condition A, 20G  
Temperature Cycling  
Thermal Shock  
Vibration  
www.ecliptek.com | Specification Subject to Change Without Notice | Rev J 8/14/2010 | Page 1 of 6  
EMK21G2H-53.8112M TR  
MECHANICAL DIMENSIONS (all dimensions in millimeters)  
PIN CONNECTION  
0.85  
±0.15  
1
2
3
4
Tri-State  
3.20  
±0.15  
1.20 ±0.10 (x4)  
Ground  
0.08  
MAX  
Output  
Supply Voltage  
2
R0.58  
±0.10  
3
LINE MARKING  
XXXX or XXXXX  
2.39  
±0.10  
5.00  
±0.15  
1
1.15  
±0.10  
(x4)  
XXXX or XXXXX=Ecliptek  
Manufacturing Lot Code  
1
4
C0.35  
±0.10  
0.80  
±0.15  
Suggested Solder Pad Layout  
All Dimensions in Millimeters  
1.60 (X4)  
1.50 (X4)  
Solder Land  
(X4)  
1.04  
0.60  
All Tolerances are ±0.1  
www.ecliptek.com | Specification Subject to Change Without Notice | Rev J 8/14/2010 | Page 2 of 6  
EMK21G2H-53.8112M TR  
OUTPUT WAVEFORM & TIMING DIAGRAM  
VIH  
VIL  
VOH  
80% of Waveform  
OUTPUT DISABLE  
(HIGH IMPEDANCE  
STATE)  
50% of Waveform  
20% of Waveform  
VOL  
tPLZ  
tPZL  
Fall  
Time  
Rise  
Time  
TW  
T
Duty Cycle (%) = TW/T x 100  
Test Circuit for CMOS Output  
Frequency  
Counter  
Oscilloscope  
Probe  
(Note 2)  
Supply  
Voltage  
(VDD  
)
Output  
_
+
Current  
Meter  
+
+
Power  
Supply  
0.01µF  
(Note 1)  
Voltage  
Meter  
0.1µF  
(Note 1)  
CL  
(Note 3)  
Ground  
_
_
Tri-State or  
Power Down  
Note 1: An external 0.1µF low frequency tantalum bypass capacitor in parallel with a 0.01µF high frequency  
ceramic bypass capacitor close to the package ground and VDD pin is required.  
Note 2: A low capacitance (<12pF), 10X attenuation factor, high impedance (>10Mohms), and high bandwidth  
(>300MHz) passive probe is recommended.  
Note 3: Capacitance value CL includes sum of all probe and fixture capacitance.  
www.ecliptek.com | Specification Subject to Change Without Notice | Rev J 8/14/2010 | Page 3 of 6  
EMK21G2H-53.8112M TR  
Tape & Reel Dimensions  
Quantity Per Reel: 1,000 units  
4.0 ±0.1  
2.0 ±0.1  
DIA 1.5 +0.1/-0  
0.30 ±0.05  
5.5 ±0.1  
12.0 ±0.2  
A0*  
6.5 ±0.1  
8.0 ±0.2  
B0*  
K0*  
*Compliant to EIA 481A  
1.5 MIN  
18.4 MAX  
DIA 40 MIN  
Access Hole at  
Slot Location  
180 MAX  
DIA 50 MIN  
2.5 MIN Width  
10.0 MIN Depth  
Tape slot in Core  
for Tape Start  
DIA 20.2 MIN  
DIA 13.0 ±0.2  
12.4 +2.0/-0  
www.ecliptek.com | Specification Subject to Change Without Notice | Rev J 8/14/2010 | Page 4 of 6  
EMK21G2H-53.8112M TR  
Recommended Solder Reflow Methods  
Critical Zone  
TL to TP  
TP  
Ramp-up  
Ramp-down  
TL  
TS Max  
TS Min  
tL  
tP  
tSPreheat  
t 25°C to Peak  
Time (t)  
High Temperature Infrared/Convection  
TS MAX to TL (Ramp-up Rate)  
3°C/second Maximum  
Preheat  
- Temperature Minimum (TS MIN)  
- Temperature Typical (TS TYP)  
- Temperature Maximum (TS MAX)  
- Time (tS MIN)  
150°C  
175°C  
200°C  
60 - 180 Seconds  
Ramp-up Rate (TL to TP)  
3°C/second Maximum  
Time Maintained Above:  
- Temperature (TL)  
- Time (tL)  
217°C  
60 - 150 Seconds  
Peak Temperature (TP)  
260°C Maximum for 10 Seconds Maximum  
250°C +0/-5°C  
Target Peak Temperature (TP Target)  
Time within 5°C of actual peak (tp)  
Ramp-down Rate  
20 - 40 seconds  
6°C/second Maximum  
8 minutes Maximum  
Level 1  
Time 25°C to Peak Temperature (t)  
Moisture Sensitivity Level  
www.ecliptek.com | Specification Subject to Change Without Notice | Rev J 8/14/2010 | Page 5 of 6  
EMK21G2H-53.8112M TR  
Recommended Solder Reflow Methods  
Critical Zone  
TL to TP  
TP  
Ramp-up  
Ramp-down  
TL  
TS Max  
TS Min  
tL  
tP  
tSPreheat  
t 25°C to Peak  
Time (t)  
Low Temperature Infrared/Convection 240°C  
TS MAX to TL (Ramp-up Rate)  
5°C/second Maximum  
Preheat  
- Temperature Minimum (TS MIN)  
- Temperature Typical (TS TYP)  
- Temperature Maximum (TS MAX)  
- Time (tS MIN)  
N/A  
150°C  
N/A  
60 - 120 Seconds  
Ramp-up Rate (TL to TP)  
5°C/second Maximum  
Time Maintained Above:  
- Temperature (TL)  
- Time (tL)  
150°C  
200 Seconds Maximum  
Peak Temperature (TP)  
240°C Maximum  
Target Peak Temperature (TP Target)  
Time within 5°C of actual peak (tp)  
Ramp-down Rate  
240°C Maximum 1 Time / 230°C Maximum 2 Times  
10 seconds Maximum 2 Times / 80 seconds Maximum 1 Time  
5°C/second Maximum  
Time 25°C to Peak Temperature (t)  
Moisture Sensitivity Level  
N/A  
Level 1  
Low Temperature Manual Soldering  
185°C Maximum for 10 seconds Maximum, 2 times Maximum.  
High Temperature Manual Soldering  
260°C Maximum for 5 seconds Maximum, 2 times Maximum.  
www.ecliptek.com | Specification Subject to Change Without Notice | Rev J 8/14/2010 | Page 6 of 6  

相关型号:

EMK21G2H-53.90336M

CMOS, MEMS Clock Oscillators LVCMOS (CMOS) 1.8Vdc 4 Pad 3.2mm x 5.0mm Plastic Surface Mount (SMD) MEMS Clock Oscillators LVCMOS (CMOS) 1.8Vdc 4 Pad 3.2mm x 5.0mm Plastic Surface Mount (SMD)
ECLIPTEK

EMK21G2H-54.840M

CMOS, MEMS Clock Oscillators LVCMOS (CMOS) 1.8Vdc 4 Pad 3.2mm x 5.0mm Plastic Surface Mount (SMD) MEMS Clock Oscillators LVCMOS (CMOS) 1.8Vdc 4 Pad 3.2mm x 5.0mm Plastic Surface Mount (SMD)
ECLIPTEK

EMK21G2H-55.555MTR

CRYSTAL OSCILLATOR, CLOCK, 55.555MHz, LVCMOS OUTPUT, ROHS COMPLIANT, PLASTIC, SMD, 4 PIN
ECLIPTEK

EMK21G2H-55.776316M

CMOS, MEMS Clock Oscillators LVCMOS (CMOS) 1.8Vdc 4 Pad 3.2mm x 5.0mm Plastic Surface Mount (SMD) MEMS Clock Oscillators LVCMOS (CMOS) 1.8Vdc 4 Pad 3.2mm x 5.0mm Plastic Surface Mount (SMD)
ECLIPTEK

EMK21G2H-56.135M

CMOS, MEMS Clock Oscillators LVCMOS (CMOS) 1.8Vdc 4 Pad 3.2mm x 5.0mm Plastic Surface Mount (SMD) MEMS Clock Oscillators LVCMOS (CMOS) 1.8Vdc 4 Pad 3.2mm x 5.0mm Plastic Surface Mount (SMD)
ECLIPTEK

EMK21G2H-56.250M

CMOS, MEMS Clock Oscillators LVCMOS (CMOS) 1.8Vdc 4 Pad 3.2mm x 5.0mm Plastic Surface Mount (SMD) MEMS Clock Oscillators LVCMOS (CMOS) 1.8Vdc 4 Pad 3.2mm x 5.0mm Plastic Surface Mount (SMD)
ECLIPTEK

EMK21G2H-56.4457M

CMOS, MEMS Clock Oscillators LVCMOS (CMOS) 1.8Vdc 4 Pad 3.2mm x 5.0mm Plastic Surface Mount (SMD) MEMS Clock Oscillators LVCMOS (CMOS) 1.8Vdc 4 Pad 3.2mm x 5.0mm Plastic Surface Mount (SMD)
ECLIPTEK

EMK21G2H-56.600MTR

CRYSTAL OSCILLATOR, CLOCK, 56.6MHz, LVCMOS OUTPUT, ROHS COMPLIANT, PLASTIC, SMD, 4 PIN
ECLIPTEK

EMK21G2H-6.023229M

CMOS, MEMS Clock Oscillators LVCMOS (CMOS) 1.8Vdc 4 Pad 3.2mm x 5.0mm Plastic Surface Mount (SMD) MEMS Clock Oscillators LVCMOS (CMOS) 1.8Vdc 4 Pad 3.2mm x 5.0mm Plastic Surface Mount (SMD)
ECLIPTEK

EMK21G2H-6.082812MTR

CRYSTAL OSCILLATOR, CLOCK, 6.082812MHz, LVCMOS OUTPUT, ROHS COMPLIANT, PLASTIC, SMD, 4 PIN
ECLIPTEK

EMK21G2H-6.13635M

CMOS, MEMS Clock Oscillators LVCMOS (CMOS) 1.8Vdc 4 Pad 3.2mm x 5.0mm Plastic Surface Mount (SMD) MEMS Clock Oscillators LVCMOS (CMOS) 1.8Vdc 4 Pad 3.2mm x 5.0mm Plastic Surface Mount (SMD)
ECLIPTEK

EMK21G2H-6.224MTR

CRYSTAL OSCILLATOR, CLOCK, 6.224MHz, LVCMOS OUTPUT, ROHS COMPLIANT, PLASTIC, SMD, 4 PIN
ECLIPTEK