EH1120HSTS-6.144M [ECLIPTEK]
OSCILLATORS 20PPM 0+70 5.0V 4 6.144MHZ TS HCMOS/TTL HALF 8PIN DIP;![EH1120HSTS-6.144M](http://pdffile.icpdf.com/pdf2/p00300/img/icpdf/EH1120HSTS-6_1811544_icpdf.jpg)
型号: | EH1120HSTS-6.144M |
厂家: | ![]() |
描述: | OSCILLATORS 20PPM 0+70 5.0V 4 6.144MHZ TS HCMOS/TTL HALF 8PIN DIP 振荡器 |
文件: | 总7页 (文件大小:188K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
RoHS
Pb
EH1120HSTS-6.144M
EH11 20 HS
TS -6.144M
Series
Nominal Frequency
6.144MHz
RoHS Compliant (Pb-free) 5.0V 8 Pin DIP Metal
Thru-Hole HCMOS/TTL High Frequency Oscillator
Pin 1 Connection
Tri-State (Disabled Output: High Impedance)
Frequency Tolerance/Stability
±20ppm Maximum
Duty Cycle
50 ±10(%)
Package
Operating Temperature Range
0°C to +70°C
ELECTRICAL SPECIFICATIONS
Nominal Frequency
6.144MHz
Frequency Tolerance/Stability
±20ppm Maximum (Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability over the
Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25°C,
Shock, and Vibration.)
Aging at 25°C
±5ppm/year Maximum
Operating Temperature Range
Supply Voltage
0°C to +70°C
5.0Vdc ±10%
Input Current
50mA Maximum (No Load)
Output Voltage Logic High (Voh)
Output Voltage Logic Low (Vol)
Rise/Fall Time
2.4Vdc Minimum with TTL Load, Vdd-0.4Vdc Minimum with HCMOS Load (IOH = -16mA)
0.4Vdc Maximum with TTL Load, 0.5Vdc Maximum with HCMOS Load (IOL = +16mA)
6nSec Maximum (Measured at 0.8Vdc to 2.0Vdc with TTL Load; Measured at 20% to 80% of waveform
with HCMOS Load)
Duty Cycle
50 ±10(%) (Measured at 1.4Vdc with TTL Load or at 50% of waveform with HCMOS Load)
10TTL Load or 50pF HCMOS Load Maximum
CMOS
Load Drive Capability
Output Logic Type
Pin 1 Connection
Tri-State (Disabled Output: High Impedance)
Tri-State Input Voltage (Vih and Vil)
+2.2Vdc Minimum to enable output, +0.8Vdc Maximum to disable output (High Impedance), No Connect to
enable output.
Absolute Clock Jitter
±250pSec Maximum, ±100pSec Typical
±50pSec Maximum, ±30pSec Typical
10mSec Maximum
One Sigma Clock Period Jitter
Start Up Time
Storage Temperature Range
-55°C to +125°C
ENVIRONMENTAL & MECHANICAL SPECIFICATIONS
Fine Leak Test
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-883, Method 2004
Gross Leak Test
Lead Integrity
Mechanical Shock
Resistance to Soldering Heat
Resistance to Solvents
Solderability
MIL-STD-202, Method 213, Condition C
MIL-STD-202, Method 210
MIL-STD-202, Method 215
MIL-STD-883, Method 2003
Temperature Cycling
Vibration
MIL-STD-883, Method 1010
MIL-STD-883, Method 2007, Condition A
www.ecliptek.com | Specification Subject to Change Without Notice | Rev C 2/17/2010 | Page 1 of 7
EH1120HSTS-6.144M
MECHANICAL DIMENSIONS (all dimensions in millimeters)
PIN CONNECTION
1
4
5
8
Tri-State
7.620 ±0.203
0.8 ±0.1 (X3)
Case/Ground
Output
1
8
4
5
DIA 0.457
7.620
±0.203
Supply Voltage
±0.1 (X4)
5.08 MIN
LINE MARKING
1
2
ECLIPTEK
EH11TS
EH11=Product Series
5.6 MAX
3
4
6.144M
MARKING
ORIENTATION
13.2
MAX
XXYZZ
XX=Ecliptek Manufacturing
Code
Y=Last Digit of the Year
ZZ=Week of the Year
13.2
MAX
OUTPUT WAVEFORM & TIMING DIAGRAM
VIH
VIL
VOH
80% or 2.4VDC
OUTPUT DISABLE
(HIGH IMPEDANCE
STATE)
50% or 1.4VDC
20% or 0.4VDC
VOL
tPLZ
tPZL
Fall
Time
Rise
Time
TW
T
Duty Cycle (%) = TW/T x 100
www.ecliptek.com | Specification Subject to Change Without Notice | Rev C 2/17/2010 | Page 2 of 7
EH1120HSTS-6.144M
Test Circuit for TTL Output
RL Value
(Ohms)
Output Load
Drive Capability
CL Value
(pF)
390
780
15
15
6
10TTL
5TTL
Frequency
Counter
1100
2000
2200
2TTL
Oscilloscope
15
3
10LSTTL
1TTL
Table 1: RL Resistance Value and CL Capacitance
Value Vs. Output Load Drive Capability
Probe
Supply
Voltage
(Note 2)
RL
(Note 4)
(VDD
)
Output
_
+
Current
Meter
+
+
+
Power
Supply
0.01µF
(Note 1)
Power
Supply
_
Voltage
Meter
0.1µF
(Note 1)
CL
(Note 3)
Ground
_
_
No Connect
or Tri-State
Note 1: An external 0.1µF low frequency tantalum bypass capacitor in parallel with a 0.01µF high frequency
ceramic bypass capacitor close to the package ground and VDD pin is required.
Note 2: A low capacitance (<12pF), 10X attenuation factor, high impedance (>10Mohms), and high bandwidth
(>300MHz) passive probe is recommended.
Note 3: Capacitance value CL includes sum of all probe and fixture capacitance.
Note 4: Resistance value RL is shown in Table 1. See applicable specification sheet for 'Load Drive Capability'.
Note 5: All diodes are MMBD7000, MMBD914, or equivalent.
www.ecliptek.com | Specification Subject to Change Without Notice | Rev C 2/17/2010 | Page 3 of 7
EH1120HSTS-6.144M
Test Circuit for CMOS Output
Frequency
Counter
Oscilloscope
Probe
(Note 2)
Supply
Voltage
(VDD
)
Output
_
+
Current
Meter
+
+
Power
Supply
0.01µF
(Note 1)
Voltage
Meter
0.1µF
(Note 1)
CL
(Note 3)
Ground
_
_
No Connect
or Tri-State
Note 1: An external 0.1µF low frequency tantalum bypass capacitor in parallel with a 0.01µF high frequency
ceramic bypass capacitor close to the package ground and VDD pin is required.
Note 2: A low capacitance (<12pF), 10X attenuation factor, high impedance (>10Mohms), and high bandwidth
(>300MHz) passive probe is recommended.
Note 3: Capacitance value CL includes sum of all probe and fixture capacitance.
www.ecliptek.com | Specification Subject to Change Without Notice | Rev C 2/17/2010 | Page 4 of 7
EH1120HSTS-6.144M
Recommended Solder Reflow Methods
Critical Zone
TL to TP
TP
Ramp-up
Ramp-down
TL
TS Max
TS Min
tL
tP
tSPreheat
t 25°C to Peak
Time (t)
High Temperature Solder Bath (Wave Solder)
TS MAX to TL (Ramp-up Rate)
3°C/second Maximum
Preheat
- Temperature Minimum (TS MIN)
- Temperature Typical (TS TYP)
- Temperature Maximum (TS MAX)
- Time (tS MIN)
150°C
175°C
200°C
60 - 180 Seconds
Ramp-up Rate (TL to TP)
3°C/second Maximum
Time Maintained Above:
- Temperature (TL)
- Time (tL)
217°C
60 - 150 Seconds
Peak Temperature (TP)
260°C Maximum for 10 Seconds Maximum
250°C +0/-5°C
Target Peak Temperature (TP Target)
Time within 5°C of actual peak (tp)
Ramp-down Rate
20 - 40 seconds
6°C/second Maximum
8 minutes Maximum
Level 1
Time 25°C to Peak Temperature (t)
Moisture Sensitivity Level
www.ecliptek.com | Specification Subject to Change Without Notice | Rev C 2/17/2010 | Page 5 of 7
EH1120HSTS-6.144M
Recommended Solder Reflow Methods
Critical Zone
TL to TP
TP
Ramp-up
Ramp-down
TL
TS Max
TS Min
tL
tP
tSPreheat
t 25°C to Peak
Time (t)
Low Temperature Infrared/Convection 185°C
TS MAX to TL (Ramp-up Rate)
5°C/second Maximum
Preheat
- Temperature Minimum (TS MIN)
- Temperature Typical (TS TYP)
- Temperature Maximum (TS MAX)
- Time (tS MIN)
N/A
150°C
N/A
60 - 120 Seconds
Ramp-up Rate (TL to TP)
5°C/second Maximum
Time Maintained Above:
- Temperature (TL)
- Time (tL)
150°C
200 Seconds Maximum
Peak Temperature (TP)
185°C Maximum
185°C Maximum 2 Times
10 seconds Maximum 2 Times
5°C/second Maximum
N/A
Target Peak Temperature (TP Target)
Time within 5°C of actual peak (tp)
Ramp-down Rate
Time 25°C to Peak Temperature (t)
Moisture Sensitivity Level
Level 1
www.ecliptek.com | Specification Subject to Change Without Notice | Rev C 2/17/2010 | Page 6 of 7
EH1120HSTS-6.144M
Recommended Solder Reflow Methods
Critical Zone
TL to TP
TP
Ramp-up
Ramp-down
TL
TS Max
TS Min
tL
tP
tSPreheat
t 25°C to Peak
Time (t)
Low Temperature Solder Bath (Wave Solder)
TS MAX to TL (Ramp-up Rate)
5°C/second Maximum
Preheat
- Temperature Minimum (TS MIN)
- Temperature Typical (TS TYP)
- Temperature Maximum (TS MAX)
- Time (tS MIN)
N/A
150°C
N/A
30 - 60 Seconds
Ramp-up Rate (TL to TP)
5°C/second Maximum
Time Maintained Above:
- Temperature (TL)
- Time (tL)
150°C
200 Seconds Maximum
Peak Temperature (TP)
245°C Maximum
Target Peak Temperature (TP Target)
Time within 5°C of actual peak (tp)
Ramp-down Rate
245°C Maximum 1 Time / 235°C Maximum 2 Times
5 seconds Maximum 1 Time / 15 seconds Maximum 2 Times
5°C/second Maximum
Time 25°C to Peak Temperature (t)
Moisture Sensitivity Level
N/A
Level 1
Low Temperature Manual Soldering
185°C Maximum for 10 seconds Maximum, 2 times Maximum.
High Temperature Manual Soldering
260°C Maximum for 5 seconds Maximum, 2 times Maximum.
www.ecliptek.com | Specification Subject to Change Without Notice | Rev C 2/17/2010 | Page 7 of 7
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00288/img/page/EH1120TS-FRE_1748373_files/EH1120TS-FRE_1748373_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00288/img/page/EH1120TS-FRE_1748373_files/EH1120TS-FRE_1748373_2.jpg)
EH1120HSTS-74.175824M
OSCILLATORS 20PPM 0+70 5.0V 4 74.175824MHZ TS HCMOS/TTL HALF 8PIN DIP
ECLIPTEK
![](http://pdffile.icpdf.com/pdf2/p00265/img/page/EH1125HSETTS_1596940_files/EH1125HSETTS_1596940_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00265/img/page/EH1125HSETTS_1596940_files/EH1125HSETTS_1596940_2.jpg)
EH1120HSTS-FREQ2-G2TR
CRYSTAL OSCILLATOR, CLOCK, 70.001 MHz - 155.52 MHz, HCMOS/TTL OUTPUT, ROHS COMPLIANT, DIP-8
ECLIPTEK
©2020 ICPDF网 联系我们和版权申明