LM2904AQS-13 [DIODES]
Operational Amplifier,;型号: | LM2904AQS-13 |
厂家: | DIODES INCORPORATED |
描述: | Operational Amplifier, 放大器 PC |
文件: | 总16页 (文件大小:801K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
AUTOMOTIVE COMPLIANT DUAL AND QUAD OPERATIONAL AMPLIFIERS
Description
Pin Assignments
The LM2902Q/2904Q series operational amplifiers consist of four and
two independent high-gain operational amplifiers with very low input
offset voltage specification. They are designed to operate from a
single power supply over a wide range of voltages; however,
operation from split power supplies is also possible. They offer low
power supply current independent of the magnitude of the power
supply voltage.
LM2904Q/ LM2904QA
(Top View)
V
CC
1OUT
1IN-
1
2
3
4
8
7
6
5
-
2OUT
2IN-
1
-
1IN+
GND
The LM2904Q dual devices are available in SO-8, TSSOP-8 and
MSOP-8; and the LM2902Q quad devices are available in SO-14 and
TSSOP-14. All are in industry-standard pinouts, and both use “green”
mold compound as standard.
2
+
2IN+
SO-8/TSSOP-8/MSOP-8
The LM2902Q/2904Q are characterized for operation from
-40°C to +125°C, qualified to AEC-Q100 Grade 1 and are Automotive
Compliant supporting PPAPs.
LM2902Q/ LM2902QA
(Top View)
Features
4OUT
4IN-
1OUT
1IN-
1
2
3
4
5
14
13
12
Wide Power Supply Voltage Range:
-
-
-
1
2
4
3
.
.
Single Supply: 3V to 36V
1IN+
4IN+
Dual Supplies: ±1.5V to ±18V
11 GND
Very Low Supply Current Drain – Independent of Supply Voltage
V
CC
.
.
LM2904Q: 500µA
LM2902Q: 700µA
3IN+
3IN-
2IN+
2IN-
10
9
-
6
7
Low Input Bias Current: 20nA
Low Input Offset Voltage:
2OUT
8
3OUT
.
.
A Versions: 1mV (Typ)
SO-14/TSSOP-14
Non-A Version: 2mV (Typ)
Large DC Voltage Gain: 100dB
Wide Bandwidth (Unity Gain): 700kHz (Temperature
Compensated)
Internally Compensated with Unity Gain
Input Common-Mode Voltage Range Includes Ground
Differential Input Voltage Range Equal to Power Supply Voltage
Large Output Voltage Swing: 0V to VCC -1.5V
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Qualified to AEC-Q100 Grade 1
PPAP Capable (Note 4)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. Automotive products are AEC-Q100 qualified and are PPAP capable. Refer to http://www.diodes.com/quality/product_compliance_definitions/.
1 of 16
www.diodes.com
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Document number: DS37815 Rev. 3 - 2
June 2016
© Diodes Incorporated
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Schematic Diagram
VCC
6A
4A
100A
Q5
Q6
Q2
Q3
Cc
Q7
-
Q4
Q1
Rsc
INPUTS
OUTPUT
+
Q11
Q13
Q10
Q12
50A
Q8
Q9
Functional Block Diagram of LM2902Q/ 2902AQ/ 2904Q/ 2904AQ
(Each Amplifier)
Pin Descriptions
LM2902Q, LM2902AQ
Pin Name
Pin #
1
Function
Channel 1 Output
1OUT
1IN-
2
Channel 1 Inverting Input
Channel 1 Non-Inverting Input
Chip Supply Voltage
1IN+
3
4
VCC
2IN+
5
Channel 2 Non-Inverting Input
Channel 2 Inverting Input
Channel 2 Output
2IN-
6
2OUT
7
3OUT
8
Channel 3 Output
3IN-
9
Channel 3 Inverting Input
Channel 3 Non-inverting Input
Ground
3IN+
10
11
12
13
14
GND
4IN+
Channel 4 Non-Inverting Input
Channel 4 Inverting Input
Channel 4 Output
4IN-
4OUT
LM2904Q, LM2904AQ
1OUT
1IN-
1
2
3
4
5
6
7
8
Channel 1 Output
Channel 1 Inverting Input
Channel 1 Non-inverting Input
Ground
1IN+
GND
2IN+
2IN-
Channel 2 Non-Inverting Input
Channel 2 Inverting Input
Channel 2 Output
2OUT
VCC
Chip Supply Voltage
2 of 16
www.diodes.com
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Document number: DS37815 Rev. 3 - 2
June 2016
© Diodes Incorporated
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Absolute Maximum Ratings (Note 5) (@TA = +25°C, unless otherwise specified.)
Symbol
VCC
Parameter
Rating
±18 or 36
36
Unit
V
Supply Voltage
Differential Input Voltage
Input Voltage
V
VID
-0.3 to +36
150
V
VIN
LM2904_QS-13
LM2904_QTH-13
LM2904_QM8-13
LM2902_QS14
LM2902_QT14
175
Package Thermal Impedance
(Note 6)
200
°C/W
θJA
89
100
Output Short-Circuit to GND
(One Amplifier) (Note 7)
—
Continuous
—
VCC ≤ 15V and TA = +25°C
Operating Temperature Range
Operating Junction Temperature
Storage Temperature Range
-40 to +125
+150
°C
°C
°C
TA
TJ
-65 to +150
TST
Notes:
5. Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, functional
operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
6. Maximum power dissipation is a function of TJ(max), θ , and T . The maximum allowable power dissipation at any allowable ambient temperature is
JA
A
P
= (T
− T )/θ . Operating at the absolute maximum T of +150°C can affect reliability.
D
J(max)
A
JA
J
7. Short circuits from outputs to V
or ground can cause excessive heating and eventual destruction.
CC
ESD Ratings
LM2901_QS14
LM2901_QT14
LM2903_QS-13
LM2903_QTH-13
LM2903_QM8-13
LM2901_QS14
LM2901_QT14
LM2903_QS-13
LM2903_QTH-13
LM2903_QM8-13
500
500
Human Body Mode ESD Protection (Note 8)
500
500
<500
V
Charge Device Mode ESD Protection
1,000
Note:
8. Human body model, 1.5kΩ in series with 100pF.
Recommended Operating Conditions (Over Operating Free-Air Temperature Range, unless otherwise noted.)
Parameter
Min
2
±1
Max
36
±18
Units
Single Supply
Dual Supply
Supply Voltage
V
Ambient Temperature Range
Junction Temperature Range
-40
-40
+125
+125
°C
3 of 16
www.diodes.com
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Document number: DS37815 Rev. 3 - 2
June 2016
© Diodes Incorporated
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Electrical Characteristics (Notes 12 & 13) (@ VCC = +5.0V, TA = +25°C, unless otherwise specified.)
LM2902Q, LM2902AQ
Parameter
Conditions
Min
—
Typ
2
Max
7
Unit
TA
TA = +25°C
Full Range
TA = +25°C
Full Range
Non-A
Device
VIC = VCMR Min,
—
—
1
10
2
VO = 1.4V,
Input Offset Voltage
mV
VIO
VCC = 5V to Max
RS = 0Ω
—
A-Suffix
Device
—
—
4
Input Offset Voltage Temperature
Drift
Full Range
—
7
—
∆VIO/∆T
RS = 0Ω
µV/℃
—
—
—
—
-20
—
2
-200
-500
50
TA = +25°C
Full Range
TA = +25°C
Full Range
IIN+ or IIN− with OUT in Linear Range,
VCMR = 0V (Note 9)
Input Bias Current
Input Offset Current
nA
IB
nA
IIO
IIN+ - IIN−, VCM = 0V
—
150
Input Offset Current Temperature
Drift
—
Full Range
TA = +25°C
Full Range
—
10
—
—
—
—
—
∆IIO/∆T
pA/℃
0 to
VCC -1.5
0 to
Input Common-Mode Voltage
Range
V
VCMR
VCC = 30V (Note 10)
VCC -2.0
—
Full Range
Full Range
1.0
0.7
100
—
3.0
1.2
—
VO = 0.5 VCC, No Load VCC = 30V
VO = 0.5 VCC, No Load VCC = 5V
Supply Current
(Four Amplifiers)
mA
ICC
—
25
15
60
70
TA = +25°C
Full Range
TA = +25°C
TA = +25°C
VCC = 15V, VOUT = 1V to 11V,
Voltage Gain
V/mV
AV
RL ≥ 2kΩ
—
—
CMRR Common Mode Rejection Ratio
PSRR Power Supply Rejection Ratio
70
dB
dB
DC, VCMR = 0V to VCC-1.5V
VCC = 5V to 30V
—
100
f = 1kHz to 20kHz
(Input Referred)
(Note 11)
—
Amplifier to Amplifier Coupling
—
-120
50
—
dB
µA
TA = +25°C
TA = +25°C
VIN- = 1V, VIN+ = 0V, VCC = 15V,
VO = 200mV
12
—
Sink
ISINK
—
—
10
5
20
—
TA = +25°C
Full Range
TA = +25°C
Full Range
TA = +25°C
TA = +25°C
VIN- = 1V, VIN+ = 0V, VCC = 15V,
VO = 15V
Output Current
mA
-20
-10
—
-40
—
-60
—
VIN+ = 1V, VIN- = 0V, VCC = 15V,
VO = 0V
Source
ISOURCE
ISC
Short-Circuit to Ground
±40
±60
—
mA
V
VCC = 5V, GND = -5V, VO = 0V
—
RL = 10kΩ
VCC -1.5
—
—
High-Level Output Voltage Swing
26
27
—
VOH
RL = 2kΩ
VCC = 30V
Full Range
Full Range
28
5
—
RL ≥ 10kΩ
Low-Lever Output Voltage Swing RL ≦ 10kΩ
20
mV
VOL
AC Electrical Characteristics (Notes 12 & 13) (@ VCC = ±15.0V, TA = +25°C, unless otherwise specified.)
Parameter
Conditions
RL = 1MΩ, CL = 30pF, VI = ±10V
RL = 1MΩ, CL = 20pF
Typ
0.3
0.7
40
Unit
V/µs
SR
B1
Vn
Slew Rate at Unity Gain
Unity Gain Bandwidth
Equivalent Input Noise Voltage
MHz
nV/√Hz
RS = 100Ω, VI = 0V, f = 1kHz
Notes:
9. The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the state of the
output so that no loading change exists on the input lines.
10. The input common-mode voltage of either input signal voltage should not be allowed to become negative by more than 0.3V (@ +25°C). The upper end
of the common-mode voltage range is V
-1.5V (@ +25°C), but either or both inputs can go to +36V without damage, independent of the magnitude of
CC
V
.
CC
11. Due to proximity of external components, ensure that coupling is not originating via stray capacitance between these external parts. This typically
can be detected as this type of capacitance increases at higher frequencies.
12. Typical values are all at T = +25°C conditions and represent the most likely parametric norm as determined at the time of characterization. Actual
A
typical values may vary over time and will also depend on the application and configuration. The typical values are not tested and are not guaranteed
on shipped production material.
13. All limits are guaranteed by testing or statistical analysis. Limits over the full temperature (-40 ≤ T ≤ +125°C) are guaranteed by design, but not
A
tested in production.
4 of 16
www.diodes.com
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Document number: DS37815 Rev. 3 - 2
June 2016
© Diodes Incorporated
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Electrical Characteristics (continued) (Notes 12 & 13) (@ VCC = +5.0V, TA = +25°C, unless otherwise specified.)
LM2904Q, LM2904AQ
Unit
Parameter
Conditions
Min
—
Typ
2
Max
7
TA
TA = +25°C
Full Range
TA = +25°C
Full Range
VIC = VCMR Min,
Non-A Device
—
—
1
10
2
VO = 1.4V,
Input Offset Voltage
mV
VIO
VCC = 5V to MAX
RS = 0Ω
—
A-Suffix Device
—
—
4
Input Offset Voltage Temperature
Drift
Full Range
—
7
—
∆VIO/∆T
RS = 0Ω
µV/℃
—
—
—
—
-20
—
2
-250
-500
50
TA = +25°C
Full Range
TA = +25°C
Full Range
IIN+ or IIN− with OUT in Linear Range,
VCMR = 0V (Note 9)
Input Bias Current
Input Offset Current
nA
IB
nA
IIO
IIN+ - IIN−, VCM = 0V
—
150
Input Offset Current Temperature
Drift
—
Full Range
TA = +25°C
Full Range
—
10
—
—
—
—
—
∆IIO/∆T
pA/℃
0 to
VCC -1.5
0 to
Input Common-Mode Voltage
Range
V
VCMR
VCC = 30V (Note 10)
VCC -2.0
Full Range
Full Range
—
—
25
15
60
70
—
0.7
0.5
100
—
2.0
1.2
—
VO = 0.5 VCC, No Load
VO = 0.5 VCC, No Load
VCC = 30V
VCC = 5V
Supply Current
(Two Amplifiers)
mA
ICC
TA = +25°C
Full Range
TA = +25°C
TA = +25°C
TA = +25°C
VCC = 15V, VOUT = 1V to 11V,
Voltage Gain
V/mV
AV
RL ≥ 2kΩ,
—
CMRR Common Mode Rejection Ratio
PSRR Power Supply Rejection Ratio
Amplifier to Amplifier Coupling
70
—
dB
dB
dB
DC,VCMR = 0V to VCC-1.5V
VCC = 5V to 30V
100
120
—
f = 1kHz to 20kHz (Note 11)
—
VIN- = 1V, VIN+ = 0V, VCC = 15V,
VO = 200mV
12
50
—
µA
TA = +25°C
Sink
ISINK
10
5
20
—
—
—
TA = +25°C
Full Range
TA = +25°C
Full Range
TA = +25°C
VIN- = 1V, VIN+ = 0V, VCC = 15V,
VO = 15V
Output Current
mA
-20
-10
—
-40
—
-60
—
VIN+ = 1V, VIN- = 0V, VCC = 15V,
VO = 0V
Source
ISOURCE
ISC
Short-Circuit to Ground
±40
—
±60
—
mA
V
VCC = 5V, GND = -5V, VO = 0V
RL = 10kΩ
TA = +25°C VCC -1.5
—
—
High-Level Output Voltage Swing
26
Full Range
27
VOH
RL = 2kΩ
VCC = 30V
28
5
—
RL ≥ 10kΩ
Low-Lever Output Voltage Swing RL ≦ 10kΩ
Full Range
—
20
mV
VOL
AC Electrical Characteristics (Notes 12 & 13) (@ VCC = ±15.0V, TA = +25°C, unless otherwise specified.)
Parameter
Conditions
RL = 1MΩ, CL = 30pF, VI = ±10V
RL = 1MΩ, CL = 20pF
Typ
0.3
0.7
40
Unit
V/µs
SR
B1
Vn
Slew Rate at Unity Gain
Unity Gain Bandwidth
Equivalent Input Noise Voltage
MHz
nV/√Hz
RS = 100Ω, VI = 0V, f = 1kHz
Notes:
9. The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the state of the
output so that no loading change exists on the input lines.
10. The input common-mode voltage of either input signal voltage should not be allowed to become negative by more than 0.3V (@ +25°C). The upper end
of the common-mode voltage range is V
-1.5V (@ +25°C), but either or both inputs can go to +36V without damage, independent of the magnitude of
CC
V
.
CC
11. Due to proximity of external components, ensure that coupling is not originating via stray capacitance between these external parts. This typically
can be detected as this type of capacitance increases at higher frequencies.
12. Typical values are all at T = +25°C conditions and represent the most likely parametric norm as determined at the time of characterization. Actual
A
typical values may vary over time and will also depend on the application and configuration. The typical values are not tested and are not guaranteed
on shipped production material.
13. All limits are guaranteed by testing or statistical analysis. Limits over the full temperature (-40 ≤ T ≤ +125°C) are guaranteed by design, but not
A
tested in production.
5 of 16
www.diodes.com
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Document number: DS37815 Rev. 3 - 2
June 2016
© Diodes Incorporated
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Performance Characteristics
20
18
16
14
12
10
8
6
4
2
0
-40
-20
0
20
40
60
80
100
120
Temperature (oC)
Input Voltage Range
Input Current
0.7
1.00
Quad OPAs
Dual OPAs
0.95
0.90
0.85
0.80
0.75
0.70
0.65
0.60
0.55
0.50
0.45
TA=-40OC
TA=25OC
TA=85OC
TA=125OC
0.6
0.5
0.4
0.3
0.2
0.1
TA=-40OC
TA=25OC
TA=85OC
TA=125OC
3
6
9
12
15
18
21
24
27
30
33
36
3
6
9
12
15
18
21
24
27
30
33
36
Supply Voltage (V)
Supply Voltage (V)
Supply Current vs. Supply Voltage (LM2904Q/4AQ)
Supply Current vs. Supply Voltage (LM2902Q/AQ)
1.2
1.1
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
Quad OPAs
Dual OPAs
VCC=5.0V
VCC=15V
VCC=30V
VCC=5.0V
VCC=15V
VCC=30V
-40
-25
-10
5
20
35
50
65
80
95
110 125
-40
-25
-10
5
20
35
50
65
80
95
110 125
Temperature (OC)
Temperature (OC)
Supply Current vs. Temperature (LM2902Q/AQ)
Supply Current vs. Temperature (LM2904Q/AQ)
6 of 16
www.diodes.com
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Document number: DS37815 Rev. 3 - 2
June 2016
© Diodes Incorporated
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Performance Characteristics (continued)
2
2.0
1.8
1.6
1.4
VCC=30V
VCC=5.0V
TA=125OC
1
TA=85OC
1.2
1.0
0.8
0.6
0.4
0.2
0.0
TA=+125OC
TA=+85OC
0
-1
TA=+25OC
-0.2
-0.4
-0.6
-0.8
-1.0
-1.2
-1.4
-1.6
-1.8
-2.0
-2
TA=-40OC
TA=+25OC
TA=-40OC
-3
-4
-5
0
2
4
6
8
10 12 14 16 18 20 22 24 26 28
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
Input Commond Mode Voltage(V)
Input Commond Mode Voltage(V)
Open Loop Frequency Response
Voltage Gain
Current Limit
Large Signal Frequency Response
7 of 16
www.diodes.com
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Document number: DS37815 Rev. 3 - 2
June 2016
© Diodes Incorporated
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Performance Characteristics (cont.)
Output Characteristics: Current Sinking
Output Characteristics: Current Sourcing
Voltage Follower Pulse Response
Voltage Follower Pulse Response (Small Signal)
8 of 16
www.diodes.com
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Document number: DS37815 Rev. 3 - 2
June 2016
© Diodes Incorporated
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Application Information
General Information
The LM2902Q/2904Q series op amps which operate with only a single power supply voltage, have true-differential inputs and remain in the linear
mode with an input common-mode voltage of 0 VDC. These amplifiers operate over a wide range of power supply voltage with little change in
performance characteristics. At +25°C, amplifier operation is possible down to a minimum supply voltage of 2.3 VDC
.
Precautions should be taken to ensure that the power supply for the integrated circuit never becomes reversed in polarity, or that the unit is not
inadvertently installed backwards in a test socket. If precaution is not taken, an unlimited current surge through the resulting forward diode within
the IC may occur and could cause fusing of the internal conductors, destroying the unit.
Large differential input voltages can be easily accommodated and, as input differential voltage protection diodes are not needed, no large input
currents result from large differential input voltages. The differential input voltage may be larger than V+ without damaging the device. Protection
should be provided to prevent the input voltages from becoming negative more than -0.3 VDC (@ +25°C). An input clamp diode with a resistor to the
IC input terminal can be used.
To reduce the power supply current drain, the amplifiers have a class A output stage for small signal levels which converts to class B in a large
signal mode. This allows the amplifiers to both source and sink large output currents. Therefore both NPN and PNP external current boost
transistors can be used to extend the power capability of the basic amplifiers. The output voltage needs to raise approximately 1 diode drop above
ground to bias the on-chip vertical PNP transistor for output current sinking applications.
For AC applications where the load is capacitive coupled to the output of the amplifier, a resistor should be used from the output of the amplifier to
ground to increase the class A bias current, and prevent crossover distortion. Where the load is directly coupled, as in DC applications, there is no
crossover distortion.
Capacitive loads which are applied directly to the output of the amplifier reduce the loop stability margin. Values of 50pF can be accommodated
using the worst-case non-inverting unity gain connection. Large closed loop gains or resistive isolation should be used if larger load capacitance
must be driven by the amplifier.
The bias network of the LM2902Q/2904Q series establishes a quiescent current which is independent of the magnitude of the power supply voltage
over the range of 3 VDC to 30 VDC
.
Output short circuits either to ground or to the positive power supply should be of short time duration. Units can be destroyed, not as a result of the
short circuit current causing metal fusing, but rather due to the large increase in IC chip dissipation which will cause eventual failure due to
excessive function temperatures. Putting direct short-circuits on more than one amplifier at a time will increase the total IC power dissipation to
destructive levels, if not properly protected with external dissipation limiting resistors in series with the output leads of the amplifiers. The larger
value of output source current which is available at +25°C provides a larger output current capability at elevated temperatures (see Typical
Performance Characteristics) than a standard IC op amp.
The circuits presented in Typical Applications section emphasize operation on a single power supply voltage. If complementary power supplies are
available, all of the standard op amp circuits can be used. In general, introducing a pseudo-ground (a bias voltage reference of VCC/2) will allow
operation above and below this value in single power supply systems. Many application circuits are shown which take advantage of the wide input
common-mode voltage range which includes ground. In most cases, input biasing is not required and input voltages which range to ground can
easily be accommodated.
9 of 16
www.diodes.com
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Document number: DS37815 Rev. 3 - 2
June 2016
© Diodes Incorporated
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Application Information (continued)
Power Supply Bypassing and Layout
The LM2902Q/04Qxx family operates from both single supply voltage range 3 to 36V, or dual supply voltage ±1.5V to ±18V.
As with any operation amplifier, proper supply bypassing is critical for low noise performance and high power supply rejection. For single supply
operation system, a minimum 0.1µF bypass capacitor should be recommended to place as close as possible between VCC pin and GND. For dual
supply operation, both the positive supply pin and negative supply pin should be bypassed to ground with a separate 0.1µF ceramic capacitor.
2.2µF tantalum capacitor can be added for better performance. Keep the length of leads and traces that connect capacitors between LM29xx power
supply pin and ground as short as possible.
Ordering Information
Qualification
(Note 15)
13” Tape and Reel
Package
Code
Packaging
(Note 14)
Part Number
Quantity
Part Number Suffix
LM2902QT14-13
LM2902AQT14-13
LM2902QS14-13
LM2902AQS14-13
LM2904QS-13
T14
T14
S14
S14
S
TSSOP-14
TSSOP-14
SO-14
2,500/Tape & Reel
2,500/Tape & Reel
2,500/Tape & Reel
2,500/Tape & Reel
2,500/Tape & Reel
2,500/Tape & Reel
2,500/Tape & Reel
2,500/Tape & Reel
2,500/Tape & Reel
2,500/Tape & Reel
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
Automotive Compliant
Automotive Compliant
Automotive Compliant
Automotive Compliant
Automotive Compliant
Automotive Compliant
Automotive Compliant
Automotive Compliant
Automotive Compliant
Automotive Compliant
SO-14
SO-8
LM2904AQS-13
LM2904QTH-13
LM2904AQTH-13
LM2904QM8-13
LM2904AQM8-13
S
SO-8
TH
TH
M8
M8
TSSOP-8
TSSOP-8
MSOP-8
MSOP-8
Notes: 14. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
15. LM2902Q/2904Q have been qualified to AEC-Q100 grade 1 and are classified as “Automotive Compliant” which supports PPAP documentation.
See LM2902/2904 datasheet for commercial qualified versions.
10 of 16
www.diodes.com
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Document number: DS37815 Rev. 3 - 2
June 2016
© Diodes Incorporated
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Marking Information
(1) TSSOP-14 and SO-14
(2) SO-8
(3) MSOP-8 and TSSOP-8
11 of 16
www.diodes.com
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Document number: DS37815 Rev. 3 - 2
June 2016
© Diodes Incorporated
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Package Outline Dimensions
Please see http://www.diodes.com/package-outlines.html for the latest version.
SO-14
SO-14
Dim
A
A1
A2
B
Min
1.47
0.10
Max
1.73
0.25
H
E
Gauge Plane
1.45 Typ
L
0.33
8.53
3.80
0.51
8.74
3.99
D
E
Detail “A”
e
1.27 Typ
D
H
L
5.80
0.38
0°
6.20
1.27
8°
A2
A
All Dimensions in mm
e
B
Detail “A”
A1
SO-8
SO-8
Dim
A
A1
A2
A3
b
Min
—
0.10
1.30
0.15
0.3
Max
1.75
0.20
1.50
0.25
0.5
E1
E
Gauge Plane
Seating Plane
A1
L
D
E
E1
e
4.85
5.90
3.85
4.95
6.10
3.95
Detail ‘A’
1.27 Typ
7°~9°
h
h
L
—
0.62
0°
0.35
0.82
8°
°
45
Detail ‘A’
A2
A3
A
All Dimensions in mm
b
e
D
TSSOP-14
TSSOP-14
Dim
a1
a2
A
B
C
Min
Max
7° (4X)
Gauge Plane
Seating Plane
Pin#1Indent
B
8°
0
4.9
4.30
L
F1
5.10
4.50
1.2
2
a
F
Detail ‘A’
D
0.8
1.05
F
F1
G
1.00 Typ
G
K
0.45
0.75
A
0.65 Typ
K
L
0.19
6.40 Typ
0.30
a
1
D
C
All Dimensions in mm
Detail ‘A’
12 of 16
www.diodes.com
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Document number: DS37815 Rev. 3 - 2
June 2016
© Diodes Incorporated
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Package Outline Dimensions (continued)
Please see http://www.diodes.com/package-outlines.html for the latest version.
MSOP-8
D
MSOP-8
Dim Min Max Typ
A
-
1.10
-
A1 0.05 0.15 0.10
A2 0.75 0.95 0.86
A3 0.29 0.49 0.39
0.25
E
Gauge Plane
Seating Plane
x
b
c
D
E
0.22 0.38 0.30
0.08 0.23 0.15
2.90 3.10 3.00
4.70 5.10 4.90
y
a
L
Detail C
E1 2.90 3.10 3.00
E3 2.85 3.05 2.95
1
b
E3
E1
A3
e
L
a
x
y
-
-
0.65
A2
0.40 0.80 0.60
0°
-
A
8°
-
-
4°
0.750
0.750
e
c
A1
-
See Detail C
All Dimensions in mm
TSSOP-8
D
TSSOP-8
Dim Min Max Typ
a
0.09
A
1.20
See Detail C
E
A1 0.05 0.15
E1
A2 0.825 1.025 0.925
b
c
0.19 0.30
0.09 0.20
D
2.90 3.10 3.025
e
0.65
e
c
b
E
6.40
Gauge plane
E1 4.30 4.50 4.425
L
All Dimensions in mm
a
A2
A1
A
0.45 0.75 0.60
L
D
Detail C
13 of 16
www.diodes.com
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Document number: DS37815 Rev. 3 - 2
June 2016
© Diodes Incorporated
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Suggested Pad Layout
Please see http://www.diodes.com/package-outlines.html for the latest version.
SO-14
X
Dimensions Value (in mm)
X
Y
C1
C2
0.60
1.50
5.4
C1
1.27
C2
Y
SO-8
X
Dimensions Value (in mm)
X
Y
C1
C2
0.60
1.55
5.4
1.27
C1
C2
Y
TSSOP-14
X
Dimensions Value (in mm)
X
Y
C1
C2
0.45
1.45
5.9
0.65
C1
C2
Y
MSOP-8
X
C
Dimensions Value (in mm)
Y
C
X
0.650
0.450
1.350
5.300
Y
Y1
Y1
14 of 16
www.diodes.com
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Document number: DS37815 Rev. 3 - 2
June 2016
© Diodes Incorporated
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Suggested Pad Layout (continued)
Please see http://www.diodes.com/package-outlines.html for the latest version.
TSSOP-8
Y
Dimensions Value (in mm)
X
X
Y
C1
C2
C3
G
0.45
1.78
7.72
0.65
4.16
0.20
C3
C1
C2
G
15 of 16
www.diodes.com
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Document number: DS37815 Rev. 3 - 2
June 2016
© Diodes Incorporated
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2016, Diodes Incorporated
www.diodes.com
16 of 16
www.diodes.com
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Document number: DS37815 Rev. 3 - 2
June 2016
© Diodes Incorporated
相关型号:
LM2904AV-Q1
LM2904-Q1, LM2904B-Q1 Industry-Standard Dual Operational Amplifiers for Automotive Applications
TI
©2020 ICPDF网 联系我们和版权申明