AP1117E15G-U
更新时间:2024-09-18 07:05:17
品牌:DIODES
描述:1A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR
AP1117E15G-U 概述
1A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR 1A低压差正可调或固定模式稳压器 稳压芯片 线性稳压器IC
AP1117E15G-U 规格参数
是否无铅: | 不含铅 | 是否Rohs认证: | 符合 |
生命周期: | Not Recommended | 零件包装代码: | SOT-223 |
包装说明: | GREEN, SOT-223, 3 PIN | 针数: | 3 |
Reach Compliance Code: | compliant | ECCN代码: | EAR99 |
HTS代码: | 8542.39.00.01 | 风险等级: | 5.11 |
Is Samacsys: | N | 可调性: | FIXED |
最大回动电压 1: | 1.4 V | 标称回动电压 1: | 1.3 V |
最大绝对输入电压: | 18 V | 最大输入电压: | 12 V |
最小输入电压: | 3 V | JESD-30 代码: | R-PSSO-G3 |
JESD-609代码: | e3 | 长度: | 6.5 mm |
最大电网调整率: | 0.003% | 最大负载调整率: | 0.015% |
湿度敏感等级: | 3 | 功能数量: | 1 |
输出次数: | 1 | 端子数量: | 3 |
工作温度TJ-Max: | 125 °C | 工作温度TJ-Min: | -40 °C |
最大输出电流 1: | 1 A | 最大输出电压 1: | 1.53 V |
最小输出电压 1: | 1.47 V | 标称输出电压 1: | 1.5 V |
封装主体材料: | PLASTIC/EPOXY | 封装代码: | SOP |
封装等效代码: | SOT-223 | 封装形状: | RECTANGULAR |
封装形式: | SMALL OUTLINE | 包装方法: | TUBE |
峰值回流温度(摄氏度): | NOT SPECIFIED | 认证状态: | Not Qualified |
调节器类型: | FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR | 座面最大高度: | 1.8 mm |
子类别: | Other Regulators | 表面贴装: | YES |
技术: | BIPOLAR | 端子面层: | Matte Tin (Sn) |
端子形式: | GULL WING | 端子节距: | 2.3 mm |
端子位置: | SINGLE | 处于峰值回流温度下的最长时间: | NOT SPECIFIED |
最大电压容差: | 2% | 宽度: | 3.5 mm |
Base Number Matches: | 1 |
AP1117E15G-U 数据手册
通过下载AP1117E15G-U数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载AP1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
General Description
Features
AP1117 is a low dropout positive adjustable or fixed-mode
regulator with 1A output current capability. The product is voltage
specifically designed to provide well-regulated supply for low IC
applications such as high-speed bus termination and low current
3.3V logic supply. AP1117 is also well suited for other
•
•
•
•
•
•
1.4V Maximum Dropout at Full Load Current
Fast Transient Response
Output Current Limiting
Built-in Thermal Shutdown
Good Noise Rejection
3-Terminal Adjustable or Fixed 1.5V, 1.8V, 2.5V, 3.3V,
5.0V
SOT223-3L, TO252-3L, SOT89-3L, TO263-3L and
TO220-3L Packages
SOT223-3L and TO252-3L: Available in “Green”
Molding Compound (No Br, Sb)
applications such as VGA cards. AP1117 is guaranteed to have
lower than 1.4V dropout at full load current making it ideal to
provide well-regulated outputs of 1.25 to 5.0 with 6.4V to 18V
input supply. AP1117 is available in both commercial and
industrial temperature grade.
•
•
•
Lead Free Finish/RoHS Compliant (Note 1)
Applications
•
•
PC Peripheral
Communication
Ordering Information
X XX X X
A P 1 1 1 7
Package
Vout
Packing
Lead Free
D : TO252-3L
E : SOT223-3L
K : TO263-3L
T : TO220-3L
Y : SOT89-3L
- U :
Blank: Adj
15: 1.5V
18: 1.8V
25: 2.5V
33: 3.3V
50: 5.0V
Tube
Taping
L : Lead Free
:
Green (Note 1)
G
:
-13
Note:
1. Green is only for SOT223-3L and TO252-3L.
2. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
Tube
Part Number
13” Tape and Reel
Package Packaging
Device
Part Number
Code
(Note 3)
Quantity
Quantity
Suffix
Suffix
-13
-13
-13
AP1117D
AP1117E
AP1117K
AP1117T
AP1117Y
D
E
K
T
Y
TO252-3L
SOT223-3L
TO263-3L
TO220-3L
SOT89-3L
80
75
50
50
NA
-U
-U
-U
-U
2500/Tape & Reel
2500/Tape & Reel
800/Tape & Reel
NA
Lead-free
Lead-free
NA
NA
2500/Tape & Reel
-13
Lead-free
Note:
3. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
AP1117 Rev. 6
1 of 11
MARCH 2007
www.diodes.com
© Diodes Incorporated
AP1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
Pin Assignments
SOT223-3L
SOT89-3L
( Top View )
3
Vin
3
2
1
Vin
Vout
2
1
Vout
Adj (GND)
Adj (GND)
Tab is Vout
Tab is Vout
TO252-3L / TO263-3L
TO220-3L
( Top View )
3
FRONT VIEW
Vin
3
2
1
Vin
Vout
2
Vout
Adj (GND)
1
Adj (GND)
Tab is Vout
Tab is Vout
Pin Descriptions
NAME
I/O
I
PIN #
FUNCTION
A resistor divider from this pin to the V pin and ground sets the output voltage
out
Adj (GND)
1
2
(Ground only for Fixed-Mode).
The output of the regulator. A minimum of 10uF capacitor (0.15Ω ≤ ESR ≤ 20Ω)
must be connected from this pin to ground to insure stability.
O
V
out
The input pin of regulator. Typically a large storage capacitor (0.15Ω ≤ ESR ≤ 20Ω)
is connected from this pin to ground to insure that the input voltage does not sag
below the minimum dropout voltage during the load transient response. This pin
I
3
V
in
must always be 1.3V higher than V in order for the device to regulate properly.
out
AP1117 Rev. 6
2 of 11
MARCH 2007
www.diodes.com
© Diodes Incorporated
AP1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
Block Diagram
3
2
V
in
V
out
+
+
-
+
1.25V
CURRENT
LIMIT
1
GND
+
(FIXED)
Thermal
Adj
Shutdown
1
Absolute Maximum Ratings
Symbol
Vin
Parameter
Rating
Unit
DC Supply Voltage
-0.3 to 18
0 to +125
150
V
Operating Junction Temperature Range
(Commercial Grade)
o
TOP
C
C
o
TMJ
Maximum Junction Temperature
Power Dissipation
SOT89-3L
SOT223-3L
TO220-3L
TO252-3L
TO263-3L
Internally limited by
maximum junction
temperature
mW
PD
o
of 150 C (Note 4)
o
TST
Storage Temperature
-65 to +150
C
Note:
4. AP1117 contains an internal thermal limiting circuit that is designed to protect the regulator in the event that the maximum junction temperature
exceeded. When activated, typically at 150°C, the regulator output switches off and then back on as the die cools.
AP1117 Rev. 6
3 of 11
MARCH 2007
www.diodes.com
© Diodes Incorporated
AP1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
Electrical Characteristics (Under Operating Conditions)
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNIT
TA = 25oC, (VIN-OUT) = 1.5V
IO = 10mA
Reference Voltage
AP1117-ADJ
AP1117-1.5
AP1117-1.8
AP1117-2.5
AP1117-3.3
AP1117-5.0
1.225
1.250
1.275
V
IOUT = 10mA, TA = 25oC,
3V≦VIN≦12V
1.470
1.764
2.450
3.235
4.900
1.500
1.800
2.500
3.300
5.000
1.530
1.836
2.550
3.365
5.100
V
V
V
V
V
IOUT = 10mA, TA = 25oC,
3.3V≦VIN≦12V
IOUT = 10mA, TA = 25oC,
Output Voltage
Line Regulation
4V≦VIN≦12V
IOUT = 10mA, TA = 25oC,
4.8V≦VIN≦12V
IOUT = 10mA, TA = 25oC,
6.5V≦VIN≦12V
IO = 10mA,VOUT+1.5V<VIN<12V,
AP1117-XXX
AP1117-ADJ
AP1117-1.5
AP1117-1.8
AP1117-2.5
AP1117-3.3
0.2
1
%
TA = 25oC
VIN=3.3V,Vadj=0,0mA<Io<1A,
TA = 25oC (Note 5, 6)
VIN = 3V, 0mA<Io<1A,
TA = 25oC (Note 5, 6)
VIN = 3.3V, 0mA<Io<1A,
TA = 25oC (Note 5, 6)
VIN = 4V, 0mA<Io<1A,
TA = 25oC (Note 5, 6)
%
18
15
20
26
15
18
25
33
mV
mV
mV
mV
Load Regulation
Dropout Voltage
V
IN = 5V, 0≦IOUT≦1A,
TA = 25oC (Note 5, 6)
V
IN = 8V, 0≦IOUT≦1A,
AP1117-5.0
40
50
mV
V
TA = 25oC (Note 5, 6)
AP1117-ADJ/1.5/1.8
/2.5/3.3/5.0
1.3
1.4
IOUT = 1A, ∆VOUT = 0.1%VOUT
(VIN-VOUT
)
AP1117-ADJ/1.5/1.8
/2.5/3.3/5.0
Current Limit
(VIN-VOUT) = 5V
1. 1
A
Minimum Load Current
(Note 7)
Thermal Regulation
0oC≦Tj≦125oC
AP1117-XXX
5
10
mA
TA = 25oC, 30ms pulse
0.008
0.04
%/W
F = 180Hz, COUT = 25uF Tantalum, IOUT = 1A
Ripple Rejection
AP1117-XXX
IO = 10mA
VIN = VOUT+3V
60
0.5
70
dB
%
Temperature Stability
SOT223-3L: Control Circuitry/Power Transistor (Note 8)
TO252-3L: Control Circuitry/Power Transistor (Note 9)
SOT89-3L: Control Circuitry/Power Transistor (Note 10)
TO220-3L: Control Circuitry/Power Transistor (Note 11)
TO263-3L: Control Circuitry/Power Transistor (Note 12)
107
73
182
31.35
95
θ
JA Thermal Resistance
OC/W
Junction-to-Ambient
SOT223-3L: Control Circuitry/Power Transistor (Note 8)
TO252-3L: Control Circuitry/Power Transistor (Note 9)
SOT89-3L: Control Circuitry/Power Transistor (Note 10)
TO220-3L: Control Circuitry/Power Transistor (Note 11)
TO263-3L: Control Circuitry/Power Transistor (Note 12)
12
16
42
5.25
19
θJC Thermal Resistance
Junction-to-Case
OC/W
Notes: 5. See thermal regulation specifications for changes in output voltage due to heating effects. Line and load regulation are measured at a constant
junction temperature by low duty cycle pulse testing. Load regulation is measured at the output lead = 1/18” from the package.
6. Line and load regulation are guaranteed up to the maximum power dissipation of 15W. Power dissipation is determined by the difference
between input and output differential and the output current. Guaranteed maximum power dissipation will not be available over the full
input/output range.
7. Quiescent current is defined as the minimum output current required in maintaining regulation. At 12V input/output differential the
device is guaranteed to regulate if the output current is greater than 10mA.
8. Test condition for SOT223: Ta=27°C, no air flow, 2 oz copper, 5mmx5mm pad.
9. Test condition for TO252: Ta=27°C, no air flow, 2 oz copper, 5mmx5mm pad.
10. Test condition for SOT89-3L: no air flow, no heat sink.
11. Test condition for TO220-3L: with copper area of approximately 3in2, 1 oz, no air flow.
12. Test condition for TO263-3L: with copper area of approximately 2cmX2cm, 1 oz, no air flow.
AP1117 Rev. 6
4 of 11
MARCH 2007
www.diodes.com
© Diodes Incorporated
AP1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
Typical Performance Characteristics
0.20
0
2. 0
1. 8
1. 6
1. 4
1. 2
1. 0
0. 8
0. 6
0. 4
0. 2
0
I load=800mA
-0.20
-0.40
-0.80
- 1
Tj = 25 oC
Tj = 125 oC
25
50
75
100
125
-25
0
250
500
750
1000
0
Temperature (oC)
Output Current (mA)
Dropout Voltage vs Output Current
Load Regulation vs Temperature
2
1
1.5
1
0.8
0. 5
0
0.6
0.4
-0.5
- 1
0.2
0
-1.5
- 2
-50 -25
0
25
50
75
100 125 150
6
8
10
12
2
4
Temperature (oC)
Input Voltage (V)
Line Regulation
Percent Change in Output Voltage vs Temperature
7.5
30
20
C in = 1uF
C out = 10 uF Tantalum
Preload = 100mA
Cin=1uF
Cout=10uF Tantalum
6.5
10
0
5.5
40
-10
-20
2
20
0
1
-20
0
-40
-1
0
20 40 60 80 100 120 140 160 180 200
TIME (us)
20 30 40 50 60 70 80 90 100
TIME (us)
Load Transient Response
0
10
Line Transient Response
AP1117 Rev. 6
5 of 11
MARCH 2007
www.diodes.com
© Diodes Incorporated
AP1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
Typical Application Circuit
5V
5V
C1
10uF
C1
10uF
V
in
V
in
Vo
V
2.5V/1A
V
out
out
3.3V/1A
R1
121
R2
C2
22uF
C2
22uF
Ω
Adj
GND
Ω
121
Tab is V
Tab is V
out
out
( 5V/3.3V fixed output )
( 5V/2.5V ADJ output )
R2
Note:
Vo = VREF ∗(1+
)
R1
Marking Information
(1) SOT223-3L
(
)
Top view
Logo
X X X
1 7-VVX
ID Code
Month:
Year :
A~L =01~12
"1 " = 2001
"2 " = 2002
Part Number
1117 for ADJ
17-VV:15 for 1.5V
18 for 1.8V
L : Lead Free
G : Green
25 for 2.5V
33 for 3.3V
50 for 5.0V
(2) TO252-3L
(Top view)
L : Lead Free
Logo
G : Green
Part Number
1117 for ADJ
17-VV:15 for 1.5V
18 for 1.8V
17-VV
YY WW X X
Internal Code
Xth Week: 01~52
Year: "01" = 2001
"02" = 2002
25 for 2.5V
33 for 3.3V
50 for 5.0V
AP1117 Rev. 6
6 of 11
MARCH 2007
www.diodes.com
© Diodes Incorporated
AP1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
Marking Information (Continued)
(3) SOT89-3L
(
)
Top View
:
XX
Identification code
L : Lead Free
X X
Y M
X :
X
:
Year: 0-9
Y
M
:
Month: A~L
1
2
3
Marking Code Table
Identification Code
Output Version
DA
DB
DC
DD
DE
DF
AP1117-ADJ
AP1117-1.5V
AP1117-1.8V
AP1117-2.5V
AP1117-3.3V
AP1117-5.0V
(4) TO263-3L
( Top view )
Logo
Part Number
VV: 15 for 1.5V
18 for 1.8V
L : Lead Free
1117-VV
YY WW X X
Internal code
25 for 2.5V
33 for 3.3V
50 for 5.0V
Xth week:01~52
Year: "01" = 2001
"02" = 2002
Blank for ADJ
AP1117 Rev. 6
7 of 11
MARCH 2007
www.diodes.com
© Diodes Incorporated
AP1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
Marking Information (Continued)
(5) TO220-3L
(
Top view)
Logo
Part Number
1117 for ADJ
17-VV : 15 for 1.5V
18 for 1.8V
L : Lead Free
17 - VV
X X WWX X
ID Code
25 for 2.5V
Xth Week:01~ 52
Year: "01 " = 2001
"02 " = 2002
33 for 3.3V
50 for 5.0V
Package Information (All Dimensions in mm)
(1) SOT223-3L
6.30/6.70 Nom 6.50
2.90 3.15 Ref.
3.3
3.30/3.70
Nom 3.50
1.50/2.00
Nom 2.00
2.3
Land Pattern Recommendation (Unit: mm)
1.2
2.3 Basic
4.6 Basic
13°
0.91/1.10
0.60/0.70
Nom 0.80
0.28/0.32
Nom 1.00
13°
Seating Plane
Nom 0.30
AP1117 Rev. 6
8 of 11
www.diodes.com
MARCH 2007
© Diodes Incorporated
AP1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
Package Information (Continued) (All Dimensions in mm)
(2) TO252-3L
5.6
6.354/6.80 Typ 6.58
5.20/5.50 Typ 5.35
2.25
1.2
Land Pattern Recommendation (Unit: mm)
2.18/2.40
2.28
BSC.
4.57 BSC.
0.61 Typ
0.64/1.02
Typ 0.83
0.89/
1.14
Typ 2.29
9.00/10.40 Typ 9.70
SEATING
PLANE
0.45/0.58
Typ 0.52
0.51
0.45/0.58
Typ 0.52
(3) SOT89-3L
1.40/1.75
Typ 1.60
1.7
0.4
1.45/1.55
0.9
1.5
Typ 1.50
2.90/3.10
Typ 3.00
Land Pattern Recommendation (Unit: mm)
50 (2x)
80 (2x)
4.40/4.60 Typ 4.50
0.36/0.48
Typ 0.42
0.41/0.53 0.36/0.48
Typ 0.47 Typ 0.42
0.35/0.43
Typ 0.39
AP1117 Rev. 6
9 of 11
www.diodes.com
MARCH 2007
© Diodes Incorporated
AP1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
Package Information (Continued) (All Dimensions in mm)
(4) TO263-3L
10.9
9.65/10.29 Typ 9.97
2.54
Land Pattern Recommendation (Unit: mm)
0.38 Typ
1.3
2.54
BSC.
0.51/0.99 Typ 0.75
1.14/1.40 Typ1.27
2.28/2.80 Typ 2.54
(5) TO220-3L
3.55/4.85
Typ4.20
9.70/10.70
Typ10.20
2.54/3.43
Typ2.98
0.51/1.40
Typ0.95
Ø3.53/4.09
Typ3.81
5.84/6.86
Typ6.35
3.66/6.35
Typ5.00
1.14/1.78
Typ1.46
0.31/1.14
Typ0. 72
0.51/1.14
Typ0.83
2.03/2.92
Typ2.48
2.99/2.79
Typ2.54
4.83/5.33
Typ5.08
AP1117 Rev. 6
10 of 11
www.diodes.com
MARCH 2007
© Diodes Incorporated
AP1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
IMPORTANT NOTICE
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further
notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither
does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will
agreeto hold DiodesIncorporatedand all the companieswhose productsare represented onour website, harmlessagainst all damages.
LIFE SUPPORT
Diodes Incorporated productsare notauthorizedfor use ascriticalcomponentsin lifesupportdevices or systemswithout theexpressed written approval ofthe
PresidentofDiodesIncorporated.
AP1117 Rev. 6
11 of 11
MARCH 2007
www.diodes.com
© Diodes Incorporated
AP1117E15G-U 替代型号
型号 | 制造商 | 描述 | 替代类型 | 文档 |
AP1117E15G-13 | DIODES | 1A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR | 完全替代 |
AP1117E15G-U 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
AP1117E15L | ANACHIP | 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator | 获取价格 | |
AP1117E15L | DIODES | Fixed Positive LDO Regulator, 1.5V, 1.4V Dropout, BIPolar, PDSO4, LEAD FREE, SOT-223, 3 PIN | 获取价格 | |
AP1117E15L-13 | DIODES | 1A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR | 获取价格 | |
AP1117E15L-U | DIODES | 1A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR | 获取价格 | |
AP1117E15LA | ANACHIP | 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator | 获取价格 | |
AP1117E18 | ANACHIP | 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator | 获取价格 | |
AP1117E18 | DIODES | Fixed Positive LDO Regulator, 1.8V, 1.4V Dropout, BIPolar, PDSO4, SOT-223, 3 PIN | 获取价格 | |
AP1117E18A | ANACHIP | 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator | 获取价格 | |
AP1117E18A | DIODES | Fixed Positive LDO Regulator, 1.8V, 1.4V Dropout, BIPolar, PDSO4, SOT-223, 3 PIN | 获取价格 | |
AP1117E18G-13 | DIODES | 1A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR | 获取价格 |
AP1117E15G-U 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6