AH180N-WSG-7 [DIODES]
MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH; 微功耗全极霍尔效应开关型号: | AH180N-WSG-7 |
厂家: | DIODES INCORPORATED |
描述: | MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH |
文件: | 总8页 (文件大小:159K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AH180N
MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH
Description
Pin Assignments
The AH180N is a high sensitivity, micro power Omnipolar Hall Effect
switch IC designed for portable and battery powered equipment such
as cellular phones, PDA’ s and portable PC’ s. Based on two sensitive
Hall Effect plates and a chopper stabilized architecture the AH180N
provides a reliable solution over the whole operating range. To
support portable and battery powered equipment the design has been
optimized to operate over the supply range of 2.5V to 5.5V and
consumes only 24µA with a supply of 3V.
The single open drain output can switched on with either a North or
South pole of sufficient strength. When the magnetic flux density (B)
is larger than operate point (Bop) the output is switched on (pulled
low). The output is turned off when B becomes lower than the release
point (Brp). The output will remain off when there is no magnetic field.
Applications
Features
•
•
•
•
Cover Switch in Clam-Shell or Slide Type Cellular Phones
Display Switch for Portable PCs
•
•
•
•
•
•
Omnipolar (North or South pole) Operation
High Sensitivity
On/Off Switch for PDAs and Digital Cameras
Contact-Less Switch in Consumer Products
Single Open Drain Output
Micropower Operation
2.5V to 5.5V Operating Range
Chopper Stabilized Design Provides
Superior Temperature Stability
Minimal Switch Point Drift
Enhanced Immunity to Stress
•
•
•
•
•
•
Good RF Noise Immunity
-40°C to +85°C Operating Temperature
ESD (HBM) > 6KV
SC59 (SOT23), TSOT23, and SOT553 Low Profile Packages
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl)
and <1000ppm antimony compounds.
1 of 8
www.diodes.com
August 2012
© Diodes Incorporated
AH180N
Document number: DS32174 Rev. 4 - 2
AH180N
Typical Applications Circuit
2.5V to 5.5V
VDD
RL
C
OUTPUT
AH180N
GND
Note: C is for power stabilization and to strengthen the noise immunity, the recommended capacitance is 10nF ~ 100nF.
is the pull-up resistor, the recommended resistance is 10kOhm ~ 100kOhm.
R
L
Pin Descriptions
Pin Name
P/I/O
P/I
Function
Power Supply Input
VDD
GND
P/I
O
Ground
Output
Output Pin
Functional Block Diagram
2 of 8
www.diodes.com
August 2012
© Diodes Incorporated
AH180N
Document number: DS32174 Rev. 4 - 2
AH180N
Absolute Maximum Ratings (Note 4) (@TA = +25°C, unless otherwise specified.)
Symbol
VDD
Parameter
Ratings
Unit
Supply Voltage (Note 5)
Magnetic Flux Density
7
V
B
Unlimited
SC59
230
230
230
PD
Package Power Dissipation
TSOT23
SOT553
mW
Ts
TJ
Storage Temperature Range
-65 to +150
150
°C
°C
Maximum Junction Temperature
Notes:
4. Stresses greater than the 'Absolute Maximum Ratings' specified above, may cause permanent damage to the device. These are stress ratings
only; functional operation of the device at these or any other conditions exceeding those indicated in this specification is not implied. Device
reliability may be affected by exposure to absolute maximum rating conditions for extended periods of time
5. The absolute maximum VDD of 7V is a transient stress rating and is not meant as a functional operating condition. It is not recommended to
operate the device at the absolute maximum rated conditions for any period of time.
Recommended Operating Conditions (@TA = +25°C, unless otherwise specified.)
Symbol
VDD
Parameter
Conditions
Operating
Operating
Rating
2.5 to 5.5
-40 to +85
Unit
V
Supply Voltage
Operating Temperature Range
TA
°C
Electrical Characteristics (@TA = +25°C, VDD = 3V, unless otherwise specified.)
Symbol
VOUT
Parameter
Output On Voltage
Output Leakage Current
Conditions
Min
⎯
Typ
Max
0.3
1
Unit
IOUT = 1mA
0.1
<0.1
3
V
Ioff
VOUT = 5.5V, Output Off
µA
mA
⎯
Idd(en)
Chip Enable, TA = +25°C, VDD = 3V
Chip Enable, TA = -40 to +85°C,
6
⎯
Idd(en)
Idd(dis)
Idd(dis)
3
5
5
12
10
28
mA
µA
µA
⎯
⎯
⎯
V
DD = 2.5V to 5.5V
Chip Disable, TA = +25°C, VDD = 3V
Chip Disable, TA = -40 to 85°C,
Supply Current
V
DD = 2.5V to 5.5V
Average Supply Current,
TA = +25°C, VDD = 3V
Idd(avg)
Idd(avg)
8
8
16
40
µA
µA
⎯
⎯
Average Supply Current,
TA = -40 to +85°C, VDD = 2.5V to 5.5V
Tawake
Tperiod
D.C.
Awake Time
Period
(Note 6)
(Note 6)
75
75
125
125
⎯
µs
ms
%
⎯
⎯
⎯
Duty Cycle
0.1
Notes:
6. When power is initially turned on, VDD must be within its correct operating range (2.5V to 5.5V) to guaranteed the output sampling.
The output state is valid after the second operating cycle (typical 150ms).
Tperiod
Tawake
Idd(en)
Sample and output
latched
Idd (dis)
0
3 of 8
www.diodes.com
August 2012
© Diodes Incorporated
AH180N
Document number: DS32174 Rev. 4 - 2
AH180N
Magnetic Characteristics (Note 7 & 8) (@TA = +25°C, VDD = 3V, unless otherwise specified.)
Symbol
Parameter
Operation Point
Min
—
Typ
35
Max
50
Unit
Bops(south pole to brand side)
Bopn(north pole to brand side)
Brps(south pole to brand side)
Brpn(north pole to brand side)
Bhy(|Bopx|-|Brpx|)
-50
10
—
-35
25
—
—
Gauss
Release Point
-25
10
-10
—
Hysteresis
—
Notes:
7. Typical data is at T = +25°C, V
= 3V, and for design information only.
A
DD
8. The magnetic characteristics may vary with supply voltage, operating temperature and after soldering.
OUTPUT
OUTPUT
( off-state )
( off-state )
Vcc
Vcc
Turn off
Bhy
Turn off
Vsat
Bhy
Turn on
Turn on
( on-state )
Bopn
( on-state )
Bops
Vsat
Brpn
0
0
Brps
( Magnetic flux density B )
( Magnetic flux density B )
Performance Characteristics
(1) SC59 (commonly known as SOT23 in Asia), TSOT23, and SOT553
TA (°C)
25
50
60
70
80
85
90
100
110
120
130
140
18
150
PD (mW)
230
184
166
147
129
120
110
92
74
55
37
0
300
200
100
0
-40
25
50
75 85
100
125
150
TA, OPERATING TEMPERATURE (°C)
Power Dissipation Curve
4 of 8
www.diodes.com
August 2012
© Diodes Incorporated
AH180N
Document number: DS32174 Rev. 4 - 2
AH180N
Ordering Information
AH 180N - XX G - 7
Green
Packing
Package
W : SC59
G : Green
7 : Tape & Reel
WS : TSOT23
Z : SOT553
7” Tape and Reel
Package
Code
Device
Packaging
Quantity
Part Number Suffix
AH180N-WG-7
AH180N-WSG-7
AH180N-ZG-7
W
WS
Z
SC59
3000/Tape & Reel
3000/Tape & Reel
3000/Tape & Reel
-7
-7
-7
TSOT23
SOT553
Marking Information
(1) SC59 (commonly known as SOT23 in Asia) and TSOT23
( Top View )
XX : Identification code
Y : Year 0 to 9
W : Week : A to Z : 1 to 26 week;
a to z : 27 to 52 week; z represents
52 and 53 week
XX Y W X
X : A to Z : Green
Part Number
Package
SC59
Identification Code
AH180N
AH180N
K9
N9
TSOT23
(2) SOT553
( Top View )
XX : Identification Code
Y : Year : 0 to 9
W : Week : A to Z : 1~26 week;
a to z : 27~52 week; z represents
52 and 53 week
XX Y W X
X : A to Z : Green
Part Number
Package
SOT553
Identification Code
AH180N
K9
5 of 8
www.diodes.com
August 2012
© Diodes Incorporated
AH180N
Document number: DS32174 Rev. 4 - 2
AH180N
Package Outline Dimensions (All dimensions in mm.)
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
(1) Package Type: SC59
(2) Package Type: TSOT23
6 of 8
www.diodes.com
August 2012
© Diodes Incorporated
AH180N
Document number: DS32174 Rev. 4 - 2
AH180N
Package Outline Dimensions (Continued) (All dimensions in mm.)
(3) Package Type: SOT553
1.50/1.70
0.30 C D
1.0Typ.
1.0Typ.
0.10/0.18
C
L
C
L
0.30±0.08
D
A
Die
C
C
L
L
Hall Sensor
Pin1
0.5Typ.
Pin1
0.15/0.30(5x)
0.10
M C A-B D
0.5Typ.
0.3
B
Land Pattern Recommendation
(Unit:mm)
Top View
7 of 8
www.diodes.com
August 2012
© Diodes Incorporated
AH180N
Document number: DS32174 Rev. 4 - 2
AH180N
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2012, Diodes Incorporated
www.diodes.com
8 of 8
www.diodes.com
August 2012
© Diodes Incorporated
AH180N
Document number: DS32174 Rev. 4 - 2
相关型号:
AH1815-W-7
Hall Effect Sensor, 23mT Min, 54mT Max, Rectangular, Surface Mount, GREEN, SC-59, 3 PIN
DIODES
AH182-PL-B
Hall Effect Sensor, 1mT Min, 6mT Max, 0.30V, Rectangular, Through Hole Mount, LEAD FREE, SOT-23, SIP-3L, 3 PIN
DIODES
©2020 ICPDF网 联系我们和版权申明