AH1807-W-7 [DIODES]
Hall Effect Sensor, 4mT Min, 11.5mT Max, 0.30V, Rectangular, Surface Mount, SC-59, 3 PIN;
| 型号： | AH1807-W-7 |
| 厂家： | 
DIODES INCORPORATED |
| 描述： | Hall Effect Sensor, 4mT Min, 11.5mT Max, 0.30V, Rectangular, Surface Mount, SC-59, 3 PIN 输出元件 传感器 换能器 |
| 文件： | 总13页 (文件大小：594K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
AH1807
MEDIUM SENSITIVITY MICROPOWER
OMNIPLOAR HALL-EFFECT SWITCH
Description
Pin Assignments
The AH1807 is a medium sensitivity micropower Omnipolar Hall
Effect switch IC. It is designed for battery powered consumer
products, home appliances, and industrial equipment such as smart
meter magnetic tamper detect. Based on two Hall Effect plates and a
chopper stabilized architecture, the AH1807 provides a reliable
solution over the whole operating range. To support battery and low
power applications, the design has been optimized to operate over
the supply range of 2.5V to 5.5V and consumes only 24µW with a
supply of 3V.
TOP View)
3
1
OUTPUT
VDD
GND
2
SC59
The single open drain output can be switched on with either a North
or South pole of sufficient strength. When the magnetic flux density
(B) perpendicular to the package is larger than operate point (Bop),
the output is switched on (pulled low). The output is turned off when
B becomes lower than the release point (Brp). The output will remain
off when there is no magnetic field.
(TOP View)
1
2
3
5
4
OUTPUT
NC
GND
NC
VDD
SOT553
The AH1807 is available in SC59, SOT553 and SIP-3L.
(TOP View)
Features
3. OUTPUT
2. GND
Omnipolar (North or South pole) Operation
Medium Sensitivity
Single Open Drain Output
VDD
1.
Micropower Operation
SIP-3L
2.5V to 5.5V Operating Range
Chopper Stabilized Design Provides:
.
.
.
Superior Temperature Stability
Minimal Switch Point Drift
Applications
Enhanced Immunity to Stress
Smart E-Meters
Good RF Noise immunity
Tamper Protection Switch
Door, Lids and Tray Position Switch
Proximity and Position Switches
Level Detects
-40°C to +125°C Operating Temperature
High ESD
Small Low Profile SOT553 and Industry Standard SC59 and
SIP-3L Packages
On/Off Switch Digital Contact-Less Switch in Industrial and
Consumer Products
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
1 of 13
www.diodes.com
May 2015
© Diodes Incorporated
AH1807
Document number: DS35524 Rev. 5 - 2
AH1807
Typical Applications Circuit
2.5V to 5.5V
VDD
RL
OUTPUT
AH1807
CIN
GND
Note:
4. CIN is for power stabilization and to strengthen the noise immunity, the recommended capacitance is 10nF to 100nF.
RL is the pull-up resistor, the recommended resistance is 10kΩ to 100kΩ.
Pin Descriptions
Package: SC59 and SIP-3L
Pin
Name
Pin
Number
Function
1
2
3
Power Supply Input
Ground
VDD
GND
OUTPUT
Output Pin
Package: SOT553
Pin
Name
Pin
Number
Function
1
2
3
4
5
NC
GND
No Connection (Note 5)
Ground
NC
No Connection (Note 5)
Power Supply Input
Output
VDD
OUTPUT
Note:
5. NC is “No Connection” pin and is not connected internally. This pin can be left open or tied to ground.
Functional Block Diagram
VDD
Sleep/Awake Logic
and Power Switch
Hall
Plate
Latch
Amp
Amp
OUTPUT
GND
Output
Driver
Controller
Hall
Plate
Latch
2 of 13
www.diodes.com
May 2015
© Diodes Incorporated
AH1807
Document number: DS35524 Rev. 5 - 2
AH1807
Absolute Maximum Ratings (Note 6) (@TA = +25°C, unless otherwise specified.)
Symbol
Characteristics
Values
7
Unit
V
Supply Voltage (Note 7)
Output Pin Voltage (Note 7)
Reverse Supply Voltage
Reverse Output Pin Voltage
Output Current (source and sink)
Magnetic Flux Density
VDD
VOUT
7
V
-0.3
-0.3
2.5
V
VDD REV
VOUT_REV
IOUTPUT
B
V
mA
Unlimited
SC59 and SOT553
SIP-3L
230
230
mW
Package Power Dissipation
PD
Ts
TJ
Storage Temperature Range
-65 to +150
150
C
C
kV
Maximum Junction Temperature
ESD HBM
Human Body Model ESD Capability
6
Notes:
6. Stresses greater than the 'Absolute Maximum Ratings' specified above may cause permanent damage to the device. These are stress ratings only;
functional operation of the device at these or any other conditions exceeding those indicated in this specification is not implied. Device reliability may be
affected by exposure to absolute maximum rating conditions for extended periods of time.
7. The absolute maximum VDD of 7V is a transient stress rating and is not meant as a functional operating condition. It is not recommended to
operate the device at the absolute maximum rated conditions for any period of time.
Recommended Operating Conditions (@TA = +25°C, unless otherwise specified.)
Symbol
VDD
Characteristic
Supply Voltage
Conditions
Rating
2.5 to 5.5
5.5
Unit
V
Operating
Operating
Operating
VOUT_MAX
TA
Maximum output pin voltage
Operating Temperature Range
V
-40 to +125
C
Electrical Characteristics (@TA = +25°C, VDD = 3V, unless otherwise specified.)
Symbol
VOUT_ON
IOFF
Characteristic
Output On Voltage (VOL
Conditions
Min
Typ
0.1
Max
0.3
1
Unit
)
—
—
V
IOUT = 1mA
Output Leakage Current
< 0.1
µA
VOUT = 5.5V, Output off
During ‘awake’ period,
—
—
—
3
—
5
6
mA
mA
µA
TA = +25°C, VDD = 3V
IDD(awake)
During ‘awake’ period,
12
10
TA = -40 to +125°C, VDD = 2.5V to 5.5V
During ‘sleep’ period,
Supply Current
IDD(sleep)
IDD(sleep)
TA = +25°C, VDD = 3V
During ‘sleep’ period,
—
—
—
28
16
µA
µA
TA = -40 to +125°C, VDD = 2.5V to 5.5V
8
TA = 25°C, VDD = 3V
Average Supply Current
IDD(avg)
—
—
—
—
-
40
125
125
—
µA
µs
ms
%
TA = -40 to +125°C, VDD = 2.5V to 5.5V
Tawake
Tperiod
D.C.
Awake Time
Period
(Note 8)
(Note 8)
75
75
0.1
Duty Cycle
Note:
8. When power is initially turned on, the operating VDD must be within its correct operating range (2.5V to 5.5V) to guaranteed the output sampling.
The output state is valid after the second operating cycle (typical 150ms).
Tperiod
Tawake
IDD(awake)
Tsleep
Sample and output
latched
IDD(avg)
IDD(sleep)
0
3 of 13
www.diodes.com
May 2015
© Diodes Incorporated
AH1807
Document number: DS35524 Rev. 5 - 2
AH1807
Magnetic Characteristics (Notes 9 & 10) (@TA = +25°C, VDD = 2.5V to 5.5V, unless otherwise specified.)
(1mT=10 Gauss)
Symbol
Characteristics
Test Condition
TA = +25°C
Min
60
Typ
80
Max
105
115
-60
-50
90
Unit
Bops (south pole to part marking side)
50
80
TA = -40°C to +125°C
TA = +25°C
Operation Point
-105
-115
50
-80
-80
65
Bopn (north pole to part marking side)
Brps (south pole to part marking side)
Brpn (north pole to part marking side)
Bhy (|Bopx|-|Brpx|)
TA = -40°C to +125°C
TA = +25C
Gauss
40
65
100
-50
-40
20
TA = -40°C to +125°C
TA = +25C
Release Point
-90
-100
10
-65
-65
15
TA = -40°C to +125°C
TA = +25°C
Hysteresis (Note 11)
5
15
—
TA = -40°C to +125°C
Notes:
9. Typical data is at TA = +25°C, VDD = 3V.
10. Parameters values over operating temperature range are not tested in production, they are guaranteed by design, process control and characterization.
The magnetic characteristics may vary with supply voltage, operating temperature and after soldering.
11. Maximum and minimum hysteresis is guaranteed by design and characterization.
OUTPUT
(off-state)
VDD
(off-state)
VOH
VOH
Turn
off
Turn
on
Bhy
Turn
off
Bhy
Turn
on
(on-state)
(on-state)
VOUT_ON=VOL
VOL = VSAT
Bops
Brps
Bopn Brpn
0
( Magnetic Flux Density B )
4 of 13
www.diodes.com
May 2015
© Diodes Incorporated
AH1807
Document number: DS35524 Rev. 5 - 2
AH1807
Typical Operating Characteristics
TA = +25°C
T= +25°C
5 of 13
www.diodes.com
May 2015
© Diodes Incorporated
AH1807
Document number: DS35524 Rev. 5 - 2
AH1807
Thermal Performance Characteristics
(1) Package type: SC59, SOT553 and SIP-3L
25
50
60
70
80
85
90
100
110
120
130
140
18
150
TA (°C)
230
184
166
147
129
120
110
92
74
55
37
0
PD (mW)
PD (mW)
Power Dissipation Curve
300
200
100
0
-40
25
50
75
100
125
150
TA (oC)
Ordering Information
.
AH1807 - X - X
Packing
7 : Tape & Reel
A : Ammo Box (Note 12)
B : Bulk (Note 13)
Package
W : SC59
Z : SOT553
P : SIP-3L
Bulk
7” Tape and Reel
Ammo Box
Package
Code
Device
Packaging
Part
Part
Part
Quantity
Quantity
Quantity
Number Suffix
Number Suffix
Number Suffix
AH1807-W-7
AH1807-Z-7
AH1807-P-B
AH1807-P-A
W
Z
SC59
SOT553
SIP-3L
SIP-3L
NA
NA
NA
NA
-B
3,000/Tape & Reel
-7
-7
NA
NA
NA
NA
NA
-A
3,000/Tape & Reel
P
P
1000
NA
NA
NA
NA
NA
NA
NA
4,000/Box
Notes:
12. Ammo Box is for SIP-3L Spread Lead.
13. Bulk is for SIP-3L Straight Lead.
6 of 13
www.diodes.com
May 2015
© Diodes Incorporated
AH1807
Document number: DS35524 Rev. 5 - 2
AH1807
Marking Information
(1) Package Type: SC59
( Top View )
XX : Identification code
Y : Year 0 to 9
W : Week : A to Z : 1 to 26 week;
a to z : 27 to 52 week; z represents
52 and 53 week
XX Y W X
X : Internal Code
Part Number
AH1807
Package
Identification Code
SC59
H7
(2) Package Type: SOT553
( Top View )
XX : Identification Code
Y : Year : 0 to 9
W : Week : A to Z : 1~26 week;
a to z : 27~52 week; z represents
52 and 53 week
XX Y W X
X : Internal code
Part Number
AH1807
Package
Identification Code
SOT553
J7
(3) Package Type: SIP-3L
(Top View)
Y : Year : 0~9
WW : Week : 01~52, "52" represents
Part Number
1807
Y WW X
52 and 53 week
X : Internal Code
7 of 13
www.diodes.com
May 2015
© Diodes Incorporated
AH1807
Document number: DS35524 Rev. 5 - 2
AH1807
Package Outline Dimensions (All dimensions in mm.)
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
(1) Package Type: SC59
A
SC59
Min
0.35
1.50
2.70
-
Dim
A
B
Max
0.50
1.70
3.00
-
Typ
0.38
1.60
2.80
0.95
1.90
3.00
0.05
1.10
0.40
0.15
0.75
-
C
B
C
D
G
H
-
-
2.90
0.013 0.10
3.10
G
H
J
K
1.00
0.35
0.10
0.70
0°
1.30
0.55
0.20
0.80
8°
L
K
J
M
M
N
N
L
D
All Dimensions in mm
Min/Max
C
L
PART
MARKING
SURFACE
Die
Hall Sensor
Pin1
1.3/1.5
Sensor Location
8 of 13
www.diodes.com
May 2015
© Diodes Incorporated
AH1807
Document number: DS35524 Rev. 5 - 2
AH1807
Package Outline Dimensions (All dimensions in mm.)
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
(2) Package Type: SOT553
D
e1
SOT553
Dim
A
b
c
D
E
E1
e
e1
F
L
Min
Max
0.62
0.30
0.18
1.70
1.70
1.25
0.50 BSC
1.00 BSC
0.10
Typ
0.60
0.20
0.15
1.60
1.60
1.20
0.55
0.15
0.10
1.50
1.55
1.10
e
E/2
E1/2
E1
E
L (5x)
0.00
0.10
6°
––
0.20
7°
c
b (5x)
F
0.30
8°
a
R0.1 MAX.
TYP.
All Dimensions in mm
A
TYP.
Min/Max
0.10/0.18
C
L
0.22/0.38
0.75/0.85
C
L
Hall Sensor
PART
MARKING
SURFACE
Pin# 1
Sensor Location
9 of 13
www.diodes.com
May 2015
© Diodes Incorporated
AH1807
Document number: DS35524 Rev. 5 - 2
AH1807
Package Outline Dimensions (cont.) (All dimensions in mm.)
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
(3) Package Type: SIP-3L for Bulk Pack
SIP-3 for Bulk Pack
Dim
A
Min
3.9
Max
4.3
a1
a2
a3
a4
B
C
D
E
F
5° Typ
L
5° Typ
45° Typ
3° Typ
J
a
2
C
2.8
3.2
1.60
0.432
0.508
0.2
N
B
P
1.40
0.33
0.40
0
D
A
G
H
J
L
N
P
1.24
2.51
0.35
14.0
0.63
1.55
1.30
2.57
0.43
15.0
0.84
-
a4
G
H
E
F
All Dimensions in mm
Min/Max
0.63/0.84
0.27/0.48
1.90/2.10
1.05/1.25
Hall Sensor
e
i
PART
MARKING
SURFACE
D
PART
MARKING
SURFACE
2
1
3
Sensor location
10 of 13
www.diodes.com
May 2015
© Diodes Incorporated
AH1807
Document number: DS35524 Rev. 5 - 2
AH1807
Package Outline Dimensions (cont.) (All dimensions in mm.)
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
(4) Package Type: SIP-3L for Ammo Pack
SIP-3
N
for Ammo Pack only
D
E
F
C
Dim
A
Min
3.9
Max
4.3
a1
a2
B
C
D
E
F
G
45° Typ
3° Typ
3.2
A
G
2.8
1.40
0.35
0.43
0
a1
1.60
0.41
0.48
0.2
a2
B
P
2.4
2.9
N
P
0.63
1.55
0.84
-
All Dimensions in mm
Min/Max
0.63/0.84
0.27/0.48
1.90/2.10
1.05/1.25
PART
MARKING
SURFACE
Hall Sensor
PART
MARKING
SURFACE
2
1
3
Sensor location
11 of 13
www.diodes.com
May 2015
© Diodes Incorporated
AH1807
Document number: DS35524 Rev. 5 - 2
AH1807
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
(1) Package Type: SC59
Y
Dimensions Value (in mm)
Z
Z
X
Y
C
E
3.4
0.8
1
2.4
1.35
C
X
E
(2) Package Type: SOT553
C2
C2
Dimensions Value (in mm)
Z
G
X
2.2
1.2
0.375
0.5
C1
G
Z
Y
C1
C2
1.7
Y
0.5
X
12 of 13
www.diodes.com
May 2015
© Diodes Incorporated
AH1807
Document number: DS35524 Rev. 5 - 2
AH1807
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2015, Diodes Incorporated
www.diodes.com
13 of 13
www.diodes.com
May 2015
© Diodes Incorporated
AH1807
Document number: DS35524 Rev. 5 - 2
相关型号：
AH1807-Z-7
The AH1807 is a medium sensitivity micropower Omnipolar Hall Effect switch IC designed for battery powered consumer to home appliance and industrial equipment such as smart meter magnetic tamper detect.
DIODES
AH1808-W-7
Hall Effect Sensor, 1mT Min, 6mT Max, 0.30V, Plastic/epoxy, Rectangular, 3 Pin, Surface Mount, SC-59, 3 PIN
DIODES
AH1809
The AH1809 is a low sensitivity micro power Omnipolar Hall Effect switch IC designed for battery powered consumer to home appliance and industrial equipment such smart e-meters.
DIODES
AH1809-Z-7
Hall Effect Sensor, 8mT Min, 18.5mT Max, 0.30V, Rectangular, Surface Mount, GREEN, SOT-553, 5 PIN
DIODES
©2020 ICPDF网 联系我们和版权申明