AH173-WG-7-A [DIODES]
INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH TEMPERATURE; 内部上拉霍尔效应锁存对于高温型号: | AH173-WG-7-A |
厂家: | DIODES INCORPORATED |
描述: | INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH TEMPERATURE |
文件: | 总9页 (文件大小:119K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AH173
INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH
TEMPERATURE
General Description
Features
AH173 is a single-digital-output Hall-effect sensor with pull-up
resistor for high temperature operation. The device includes an
on-chip Hall voltage generator for magnetic sensing, an amplifier
to amplify Hall voltage, and a comparator to provide switching
hysteresis for noise rejection, and an output driver with a pull-up
resistor (Rpu). An internal band-gap regulator is used to provide
temperature compensated supply voltage for internal circuits and
allows a wide operating supply range. While the magnetic flux
density (B) is larger than operate point (Bop), the OUT pin turns
on (low). If B moves toward release point (Brp), the OUT pin is
latched “on” state prior to B < Brp. When B < Brp, the OUT pin
goes into “off ” state.
•
•
•
•
•
Bipolar Hall Effect Latch Sensor
3V to 20V DC Operation Voltage
Built-in Pull-Up Resistor
25mA Output Sink Current
Operating Temperature:
−40°C ~ +125°C
•
Lead Free Finish/RoHS Compliant for Lead Free
products (Note 1)
Lead Free Package: SIP-3L, SC59-3L
Green Package: SC59-3L
•
•
Applications
•
•
•
•
Rotor Position Sensing
Current Switch
Encoder
RPM Detection
Ordering Information
AH173 - X X X - X
Magnetic
Packing
Package
Lead-Free
Characteristics
-
-
-
:
A or B
P: SIP-3L
W: SC59-3L
L : Lead Free
G : Green (Note3)
7 Taping
:
Bulk (Note 4)
B
:
Ammo Box (Note 5)
A
Note:
1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
Tube/Bulk
7” Tape and Reel
Ammo Box
Device Package Packaging
Quantity
Part
Quantity
Part
Quantity
Part
Code
(Note 2)
Number
Suffix
-B
Number
Suffix
NA
Number
Suffix
AH173-P
AH173-W
P
SIP3-3L
SC59-3L
1000
NA
NA
4000/Box
NA
Lead-free
-A
NA
W
NA
3000/Tape & Reel
-7
Note: 2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
3. Green is only available for SC59-3L
4. Bulk is for SIP-3 Straight Lead.
5. Ammo Box is for SIP-3 Spread Lead.
AH173 Rev. 4
1 of 9
FEBRUARY 2007
www.diodes.com
© Diodes Incorporated
AH173
INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH
TEMPERATURE
Pin Description
Pin Assignment
(Top View)
Name
Description
3.
OUT
2. GND
1. V
Positive Power Supply
Ground
VCC
GND
OUT
Output Stage
CC
(SIP-3L package)
OUT
3.
GND 2.
1. V
CC
(SC59-3L Package)
Block Diagram
VCC
1
Rpu
REG.
3 OUT
AMP
2 GND
AH173 Rev. 4
2 of 9
www.diodes.com
FEBRUARY 2007
© Diodes Incorporated
AH173
INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH
TEMPERATURE
Functional Application Circuit
I
I
A
B
Digital Hall Effect Sensor
M
I
C
Driver
&
M: Three Phase Hall Motor
I
I
a
b
I
c
Control Logic
RPM sensing
HA
HB
HC
Hall Motor Driver
3 Phase Hall Motor
Absolute Maximum Ratings (TA = 25°C)
Characteristics
Symbol
Values
Unit
Supply Voltage
Output “Off” Voltage
Output “On” Current
Operating Temperature Range
Storage Temperature Range
Maximum Junction Temperature
VCC
Vout (off)
Io (sink)
Top
Tstg
Tj
20
20
25
V
V
mA
°C
°C
°C
mW
mW
-40~+125
-65~+150
+150
550
SIP-3L
SC59-3L
Power Dissipation
PD
230
Electrical Characteristics (TA = 25°C)
Characteristics
Supply Voltage
Symbol
Conditions
CC = 12V, OUT ”ON”
Min.
Typ.
Max.
Unit
Vcc
3
-
20
V
V
Output Saturation Voltage
Vout (sat)
-
300
400
mV
Io = 10mA
Supply Current
Internal Pull-up Resistor
Dropout Voltage
Icc
Rpu
Vd
VCC = 12V, OUT ”OFF”
-
7
-
3.5
10
-
6
13
0.3
mA
KΩ
V
Vd = Vcc - Vce
AH173 Rev. 4
3 of 9
FEBRUARY 2007
www.diodes.com
© Diodes Incorporated
AH173
INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH
TEMPERATURE
Functional Application Circuit
(1mT = 10 Gauss)
A grade
Characteristics
Symbol
Min.
Typ.
Max.
Unit
Operation Point
Release Point
Hysteresis
Bop
Brp
Bhy
15
-60
-
-
-
80
60
-15
-
Gauss
Gauss
Gauss
B grade
Characteristics
Symbol
Min.
Typ.
Max.
Unit
Operation Point
Release Point
Hysteresis
Bop
Brp
Bhy
5
-80
-
-
-
80
80
-5
-
Gauss
Gauss
Gauss
Operating Characteristics
Vout
Vcc
S
S
Vd
High
Marking Side
Bhy
Marking Side
Low
N
N
VSAT
(SIP3)
( SC59 )
rp
op
B
B
0
(Magnetic Flux Density)
AH173 Rev. 4
4 of 9
FEBRUARY 2007
www.diodes.com
© Diodes Incorporated
AH173
INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH
TEMPERATURE
Performance Characteristics (SIP-3L)
25
50
60
70
80
85
286
130
88
90
264
135
66
95
242
140
44
100
220
150
0
TA (°C)
PD (mW)
TA (°C)
550
105
198
440
110
176
396
115
154
352
120
132
308
125
110
PD(mW)
Pow er D issipation C urve
PD (m W )
600
500
400
300
200
100
0
0
25
50
75
100
125
150
C )
TA
(
Performance Characteristics (SC59-3L)
TA (°C) 25
50
60
70
80
85
90 100 110 120 125 130 140 150
230 184 166 147 129 120 110 92
74
55
46
37
18
0
PD (mW)
P o w e r D i s s i p a t i o n C u r v e
P
( m W )
D
3 0 0
2 0 0
1 0 0
0
0
2 5
5 0
7 5
1 0 0
1 2 5
1 5 0
T
A
( ° C )
AH173 Rev. 4
5 of 9
FEBRUARY 2007
www.diodes.com
© Diodes Incorporated
AH173
INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH
TEMPERATURE
Marking Information
(1) SC59-3L
(Top View)
3
XX
Y
: J3: AH173
: Year 0~9
XX Y M X
M : Month A~L
: Internal code a~z: Lead Free
A~Z: Green
X
1
2
Part Number Package Identification Code
AH173
SC59-3L
J3
(2) SIP-3L
(Top View)
173
Y : Year: “1”=2001
“2”=2002
WW: Nth Week 01~52
Y
WW X
X : Internal code
a~z: Lead Free
Package Information
(1) Package Type: SIP-3L for Bulk pack
0.51mm
NOM
2.00mm
1.15mm
BRANDED
SURFACE
1
2
3
Sensor Location
Active Area Depth
AH173 Rev. 4
6 of 9
www.diodes.com
FEBRUARY 2007
© Diodes Incorporated
AH173
INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH
TEMPERATURE
Package Information (Continued)
Package Dimension
(2) Package Type: SIP-3L for Ammo pack
AH173 Rev. 4
7 of 9
www.diodes.com
FEBRUARY 2007
© Diodes Incorporated
AH173
INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH
TEMPERATURE
Package Information (Continued)
(3) Package Type: SC59-3L
0.35/0.50
2.70/
3.00
TOP VIEW
1.90
2.90/3.10
1.00/
1.30
0.10/0.20
0.013/0.10
0.95
0.35/0.55
0°/8°
Sensor Location
AH173 Rev. 4
8 of 9
FEBRUARY 2007
www.diodes.com
© Diodes Incorporated
AH173
INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH
TEMPERATURE
IMPORTANT NOTICE
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further
notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither
does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will
agreeto hold DiodesIncorporatedand all the companieswhose productsare represented onour website, harmlessagainst all damages.
LIFE SUPPORT
Diodes Incorporated productsare notauthorizedfor use ascriticalcomponentsin lifesupportdevices or systemswithout theexpressed written approval ofthe
PresidentofDiodesIncorporated.
AH173 Rev. 4
9 of 9
FEBRUARY 2007
www.diodes.com
© Diodes Incorporated
相关型号:
AH173-WG-7A
Hall Effect Sensor, -6mT Min, 6mT Max, Rectangular, Surface Mount, GREEN, SC-59, 3 PIN
DIODES
AH173-WL-A
Hall Effect Sensor, -6mT Min, 6mT Max, 300-400mV, Bipolar, Plastic/epoxy, Rectangular, 3 Pin, Surface Mount, LEAD FREE, SOT23-3
DIODES
©2020 ICPDF网 联系我们和版权申明