CM02A-8DP5S-D02D9 [DDK]
DeviceNet Micro-Style Connectors; DeviceNet的微型式连接器型号: | CM02A-8DP5S-D02D9 |
厂家: | DDK LTD. |
描述: | DeviceNet Micro-Style Connectors |
文件: | 总6页 (文件大小:274K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DeviceNet Micro-Style Connectors
CM02 Series
Conforming
S t a n d a r d
DeviceNet
◆ OUTLINE
ꢀThe CM02 series is a Micro-style connector for
use in a DeviceNet communication network.
These products provide connections between
simple industrial devices such as sensor,
actuators and higher-level devices such as controllers.
Waterproof
IP 67
This connector system is also recommended for
network and can be used in harsh environmental
CCLink
conditions, having IP67 rated for protection against moisture, oil and dust.
◆ FEATURES
・Crimp termination for the cable mount plugs and jacks
・Receptacle : Soldering
・Protection from wiring errors by color-coding the contact holder with red, white, blue and blackꢀ
・Available style are cable mount plug with socket contacts, cable mount jack with pin contacts, T tap, panel mount
receptacle with pin contacts, panel mount plug receptacle with socket contacts, terminating resistor and dust cap
Lock Type
Threaded
Coupling
◆ SPECIFICATIONS
Rated Current
Rated Voltage
ꢀ
3A/contact
24V DCꢀ
Dielectric Withstanding Voltage
Insulation Resistance
Operating Temperature Range
Waterproof
500V AC(r.m.s) for 1 minute
1000M Ω min. at 250V DC
- 40℃ to +85℃
IP67 when mated
5
No. of Contacts
Physical Configuration of Cables For Example
Jacket
DC Power Insulation
Color:Black
Conductor
Braid Shield
Data Insulation Colors : Blue & Yellow
Ground Insulation Color : White
AL / MY Shield
Data Insulation
Color:White
AL / MY Shield
Braid Shield
Jacket
AL / MY Shield
Drain Wire
Data Insulation
Color:Blue
Drain Wire
DC Power Insulation
Color:Red
CC-Link Cable
DeviceNet Thick Cable
◎ Specifications and/or dimensions in this catalog are subject to change without notice.
ꢀYour checking the latest specifications with our drawings would be highly appreciated.
090206
http://www.ddknet.co.jp
RRooHHSS
CCoommpplliiaanntt
MATERIAL/FINISH
(With Socket Contacts)
(With Pin Contacts)
(With Pin or Socket Contacts)
Resistor
Item
Plug
Jack
Insulator
Plastic(UL94V-0)/Black
Copper Alloy/Gold Plating
Copper Alloy/Nickel Plating
Aluminum Alloy/Black
Plastic(UL94V-0)/Black
Copper Alloy/Gold Plating
Copper Alloy/Gold Plating
Aluminum Alloy/Black
Plastic(UL94V-0)/Black
Plastic(UL94V-0)/Black
Plastic(UL94V-0)/Black
Synthetic Rubber/Black
Plastic(UL94V-0)/Black
Copper Alloy/Gold Plating
Copper Alloy/Gold Plating
Aluminum Alloy/Black
Contact
Coupling Ring
Backshell Nut
Contact Holder
Backshell
Clamp Nut
O-Ring
Plastic(UL94V-0)/Black
Plastic(UL94V-0)/Black
Plastic(UL94V-0)/Black
Synthetic Rubber/Black
Synthetic Rubber/Black
Synthetic Rubber/Black
Plastic(UL94V-0)/Black
Plastic(UL94V-0)/Black
Synthetic Rubber/Black
Gasket
Synthetic Rubber/Black for Socket
Bushing
Synthetic Rubber/Black
Receptacle
(With Pin Contacts)
Plug Receptacle
(With Socket Contacts)
Item
“T”Tap
Insulator
Plastic(UL94V-0)/Black
Copper Alloy/Gold Plating
Zinc Alloy/Nickel Plating
Plastic(UL94V-0)/Black
Copper Alloy/Gold Plating
Plastic(UL94V-0)/Black
Copper Alloy/Gold Plating
Contact
Coupling Ring
Shell
Copper Alloy/Nickel Plating
Copper Alloy/Nickel Plating
Zinc Alloy/Nickel Plating
Copper Alloy/Nickel Plating
Synthetic Rubber/Black
Synthetic Rubber/Black
Nut Washer
Gasket(Mating Side)
Gasket(Mounting Side)
Overmolding Resin
Synthetic Rubber/Black
Plastic(UL94V-0)/Black
Synthetic Rubber/Black
CRIMP TOOL
・For DeviceNet Plug and Jack
Conductor Size
Item
Highly reliable crimp termination can be made for
the straight plug and the straight jack. Two kinds
of crimp tools are needed since a connector has a
straight contact and angle contacts of which style
are different. However the locater can be removed
and you can use one hand tool for termination if
you have two locators each for the straight contact
and the angle contacts.
AWG 22 - AWG 24
357J-19811
AWG 18 - AWG 20
357J-17917
A set of crimp tool for straight contacts
Hand Tool
357J-12610
357J-12610
Contents
Locator
357J-18918
357J-18918
Inspection Gauge 2
357J-19779-2
357J-19812
357J-17900-2
357J-17898
A set of crimp tool for angle contacts
Hand Tool
357J-12610
357J-12610
Locator
Contents
357J-17899
357J-17899
Inspection Gauge 1
357J-19779-1
357J-19779-2
357J-17900-1
357J-17900-2
Inspection Gauge 2
Conductor Size
AWG 18-AWG 20
357J-21598
Item
・For CC-Link Plug and Jack
A set of crimp tool for angle contacts
Hand Tool
The connectors for CC-Link network will have four
(4) angle contacts and the style of contact is only
one. It is feasible for you to terminate the cable to
the contacts by one kind of the crimp tool for angle
contacts.
357J-12610
Contents
Locator
357J-17899
Inspection Gauge 2
357J-17900-2
◆ CONFIGURATION OF CONTACTS
Angle Socket Contact
Straight Pin Contact
Angle Pin Contact
Straight Socket Contact
24.4
25.9
30.85
29.35
◎ Specifications and/or dimensions in this catalog are subject to change without notice.
ꢀYour checking the latest specifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
2
CM02 Series
Unit:mm
○Straight Plug With Socket Contacts
・DeviceNet Plug
A set of plug consists of 1 body, 1 straight contact and 4 angle contacts
Applicable Cable
P/N
Conductor Size
Outside Dia.
A set of plug : CM02A-8DP5S-D(02)
Body : CM02A-8DP5S-D(02)-0
Straight Contact : CM02A-SSC-2224
Angle Contact : CM02A-ASC-2224
AWG22 - AWG24
φ 6.5mm - φ 7.2mm
Contents
A set of plug : CM02A-8DP5S-D(04)
Body : CM02A-8DP5S-D(04)-0
AWG22 - AWG24
AWG18 - AWG20
AWG18 - AWG20
AWG18 - AWG20
φ 8.8mm - φ 9.8mm
φ 6.5mm - φ 7.2mm
φ 8.2mm - φ 8.9mm
φ 9.4mm - φ 9.9mm
Contents
Straight Contact : CM02A-SSC-2224
Angle Contact : CM02A-ASC-2224
A set of plug : CM02A-8DP5S-D(02)(D9)
Body : CM02A-8DP5S(02)(D9)-0
Contents
Straight Contact : CM02A-SSC-1820
Angle Contact : CM02A-ASC-1820
A set of plug : CM02A-8DP5S-D
Body : CM02A-8DP5S-D-0
Contents
Straight Contact : CM02A-SSC-1820
Angle Contact : CM02A-ASC-1820
A set of plug : CM02A-8DP5S-D(01)
Body : CM02A-8DP5S-D(01)-0
Contents
Straight Contact : CM02A-SSC-1820
Angle Contact : CM02A-ASC-1820
A soldering style is also available. P/N : CM02A-8DP5S-D(02)(D4)
ꢀ
Applicable Cable : AWG16 max. conductor size φ 6.5mm - φ 7.2mm outside dia.
・CC-Link Plug
A set of plug consists of 1 body and 4 angle contacts
Applicable Cable
Conductor Size
P/N
Outside Dia.
A set of plug : CM02A-8DP5S-D(03)
Body : CM02A-8DP5S-D(03)-0
Angle Contact : CM02A-ASC-1820
AWG18 - AWG20
φ 7.2mm - φ 7.9mm
Contents
54
A
M12×1 Thread
A
(Contact No.1)
Red
White
(Contact No.2)
(Contact No.4)
Black
Blue
(Contact No.3)
(Contact No.5)
Section A-A
◎ Specifications and/or dimensions in this catalog are subject to change without notice.
ꢀ Your checking the latest specifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
3
CM02 Series
Unit:mm
○Straight Jack With Pin Contacts
・DeviceNet Jack
A set of Jack consists of 1 body, 1 straight contact and 4 angle contacts
Applicable Cable
P/N
Conductor Size
Outside Dia.
A set of Jack : CM02A-8DJ5P-D(02)
Body : CM02A-8DJ5P-D(02)-0
Straight Contact : CM02A-SPC-2224
Angle Contact : CM02A-APC-2224
AWG22 - AWG24
φ 6.5mm - φ 7.2mm
Contents
A set of Jack : CM02A-8DJ5P-D(04)
Body : CM02A-8DJ5P-D(04)-0
AWG22 - AWG24
AWG18 - AWG20
AWG18 - AWG20
AWG18 - AWG20
φ 8.8mm - φ 9.8mm
φ 6.5mm - φ 7.2mm
φ 8.2mm - φ 8.9mm
φ 9.4mm - φ 9.9mm
Contents
Straight Contact : CM02A-SPC-2224
Angle Contact : CM02A-APC-2224
A set of Jack : CM02A-8DJ5P-D(02)(D9)
Body : CM02A-8DJ5P-D(02)(D9)-0
Contents
Straight Contact : CM02A-SPC-1820
Angle Contact : CM02A-APC-1820
A set of Jack : CM02A-8DJ5P-D
Body : CM02A-8DJ5P-D-0
Contents
Straight Contact : CM02A-SPC-1820
Angle Contact : CM02A-APC-1820
A set of Jack : CM02A-8DJ5P-D(01)
Body : CM02A-8DJ5P-D(01)-0
Contents
Straight Contact : CM02A-SPC-1820
Angle Contact : CM02A-SPC-1820
A soldering style is also available. P/N : CM02A-8DJ5P-D(02)(D4)
Applicable Cable : AWG16 max. conductor size.
φ 6.5mm - φ 7.2mm outside dia.
・CC-Link Jack
A set of Jack consists of 1 body and 4 angle contacts
Applicable Cable
P/N
Conductor Size
Outside Dia.
A set of plug : CM02A-8DJ5P-D(03)
Body : CM02A-8DJ5P-D(03)-0
Angle Contact : CM02A-APC-1820
AWG 18 - AWG 20
φ 7.2mm - φ 7.9mm
Contents
58
A
M12×1 Thread
A
(Contact No.1)
White
Red
(Contact No.4)
(Contact No.2)
Blue
Black
(Contact No.5)
(Contact No.3)
SectionA-A
◎ Specifications and/or dimensions in this catalog are subject to change without notice.
ꢀ Your checking the latest specifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
4
CM02 Series
Unit:mm
○ “ T ”Tap
15
23.6
10.2
18.4
φ4.5
φ7.8
P/N : CM02-8D2TA5-CF
17
2.5
2.5
JAPAN
Jack
Plug
(Pin)
(Socket)
Plug
(Socket)
○Terminating Resistor With Pin Contacts
・Terminated between No. 4 and No. 5 with resistor,ꢀ121 ohm,1/4 watt.
P/N : CM02B-8DER5P
M12×1 Thread
121Ω
1
2
3
4
5
NC
NC
NC
43
Wiring Diagram
○Terminating Resistor With Socket Contacts
・Terminated between No. 4 and No. 5 with resistor,ꢀ121 ohm,1/4 watt.
P/N:CM02B-8DER5S
M12×1 Thread
121Ω
1
2
3
4
5
NC
NC
NC
40
Wiring Diagram
○Receptacle with Plastic Shell and Pin Contacts, Type 1
P/N : CM02-8DR5P-CF
23
・P C B Contacts
・Rear-mount configuration
・Applicable wire size : AWG22 max.
1
4
2
3
M12×1 Thread
M14×0.75 Thread
17
3 Max.
Mounting Hole
(Panel Thickness)
○Receptacle with Plastic Shell and Pin Contacts, Type 2
P/N : CM02-8DR5P-CF(D5)
・P C B Contacts
19.4
・Rear-mount configuration
・Applicable wire size : AWG22 max.
1
3
4
2
M12ꢁ1 Thread
M14ꢁ0.75 Thread
(2.7)
3 Max.
Mounting Hole
17
(Panel Thickness)
◎ Specifications and/or dimensions in this catalog are subject to change without notice.
ꢀ Your checking the latest specifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
5
CM02 Series
Unit:mm
○ Receptacle with Plastic Shell and Pin Contacts
φ14+0.1
0
P/N : CM02-8DR5PD(D1)-FG
Board Thickness
1.6±0.2
・P C B Contacts
Coding Pin
φ1.4
5.9
・Rear-mount configuration
6
1
Panel Mounting Hole
3 Max.(Panel Thickness)
5-φ1
1.5
3.5
No Printed Area
17
19.6
M12×1 Thread
9
M14×0.75 Thread
φ1.6±
23.4
2.5
2.5
Board Mounting Hole
○Plug Receptacle with Metal Shell and Socket Contacts
P/N : CM02-8DPR5S-CF
15.8
M12×1 Thread
・Rear-mount configuration
・Applicable wire size : AWG22 max.
1
1
2
4
4
2
3
3
φ16+0.1
0
19
M16×1 Thread
Mounting Hole
○Plug Insert Assembly with Socket Contacts for PCB Mount
2.5
2.5
P/N : CM02-8DP5SD(D1)-FG
Coding Pin
φ1.4
3.5
φ1.6±0.1
・P C B Contacts
・No shell
5-φ1
10
15
Board Mounting Hole
○Receptacle Cap
Metal Cap for Receptacle
PVC Cap for Receptacle
Metal Cap for Receptacle
P/N:CM01-CAP
P/N : CM01-R-CAP-CF
P/N:CM01-R-CAP(D1)
Non-Waterproof type
Waterproof type
Waterproof type
Material : PVC/Black
Material/Finish : Copper Alloy/Nickel Plating
Material/Finish:Aluminum Alloy/Anodic Coatings
18
13
13
100
straight knurl
○Plug Cap
Metal Cap for Plug
P/N : CM01-P-CAP-CF
Waterproof type
8.7
14.3
Material/Finish : Copper Alloy/Nickel Plating
◎ Specifications and/or dimensions in this catalog are subject to change without notice.
ꢀ Your checking the latest specifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
6
相关型号:
©2020 ICPDF网 联系我们和版权申明